XC7Z007S-1CLG400I - 667MHz ARM SoC FPGA | AMD
MPN: XC7Z007S-1CLG400I ✓ NakahandaXC7Z007S-1CLG400I Ulas
A Zynq-7000S SoC belongs to the FPGA and CPLD family, but it is more than a conventional programmable-logic device. It combines a hard processor subsystem, programmable logic, memory interfaces, and peripheral connectivity on one semiconductor. This hierarchy—Zynq SoC, FPGA and CPLD, programmable logic, integrated circuit, and semiconductor—allows software-controlled processing and hardware-accelerated logic to share one package.
The principal features of the XC7Z007S-1CLG400I include one ARM Cortex-A9 processor core operating at 667 MHz, 23,000 FPGA logic cells, 100 I/Os, and 256 KB of integrated RAM. Its Zynq-7000S architecture supports hardware programmability for parallel processing, control, interface bridging, or signal processing while the processor subsystem executes operating-system and application-level code. The 400-CSPBGA package supports a high ball count while retaining a compact 17 x 17 mm body.
The device combines a 28 nm programmable-logic implementation with the Zynq processor subsystem. Programmable logic can implement deterministic datapaths beside the processor, reducing external peripheral requirements and allowing data to move between hardware pipelines and software-controlled functions. The architecture is particularly useful when an application needs more throughput than a microcontroller or more software flexibility than a fixed-function ASIC, while avoiding the need to combine separate FPGA and processor packages.
Typical uses include industrial PLC modules, motor and motion controllers, programmable logic controllers for building automation, industrial IoT gateways, embedded vision preprocessing, sensor fusion, and communication equipment. The single-core processor is appropriate for compact control platforms, while the FPGA fabric can accelerate deterministic filtering, protocol handling, or parallel data acquisition. Its 100 I/Os provide connectivity for external memory, industrial interfaces, and control peripherals.
PCB design should follow AMD’s CLG400 package, pinout, and escape-routing guidance. Keep power and ground distribution robust, provide the decoupling network specified by the device documentation, and verify high-speed memory and interface routing in the selected Vivado implementation. Temperature grade, processor speed grade, tool target, and bitstream compatibility must be checked before substitution.
This page consolidates the exact device identity, industrial package information, constrained drop-in options, comparison parameters, and practical migration considerations for engineers evaluating the XC7Z007S-1CLG400I for embedded FPGA and system-on-chip designs.
Mga alternatibo na pwedeng ilagay na XC7Z007S-1CLG400I — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok XC7Z007S-1CLG400I (parehas na form factor at footprint) — pagkakaiba sa Device Type, Logic Cells, Maximum Processor Frequency, Operating Temperature Range, Package.
XC7Z007S-1CLG400C
✅ Drop-In ⚠️ Mga Talaan Hindi NaiwerikmoMagkontak para sa presyo
Tingnan ang Datasheet →XC7Z007S-1CLG400E
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
XC7Z007S-2CLG400C
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
XC7Z007S-2CLG400I
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →XC7Z007S-2CLG400E
✅ Drop-In ⚠️ Mga Talaan Hindi NaiwerikmoMagkontak para sa presyo
Tingnan ang Datasheet →XC7Z007S-1CLG400I Mga Pinakamataas na Rating at Electrical Characteristics
| Device Type | Zynq-7000S all-programmable system-on-chip |
| Processor Core | 1 x ARM Cortex-A9 MPCore |
| Maximum Processor Frequency | 667 MHz |
| FPGA Family | Artix-7 |
| Logic Cells | 23,000 logic cells |
| Process Technology | 28 nm |
| On-Chip Memory | 256 KB |
| User I/O Count | 100 I/Os |
| Debug Support | CoreSight |
| Packhaging | 400-CSPBGA, 17 x 17 mm |
| Ball Count | 400 balls |
| Uri ng Pagpapasok | Surface mount |
| Temperature na Operasyon | -40 °C to +100 °C |
| Speed Grade | -1 |
| Temperature Grade | Industrial |
Gabay sa Pin Configuration ng XC7Z007S-1CLG400I 400-cspbga, 17 x 17 mm
Pin configuration para sa XC7Z007S-1CLG400I (400-cspbga, 17 x 17 mm package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.
Wala ng detalyadong pinout data na magagamit para sa XC7Z007S-1CLG400I.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
XC7Z007S-1CLG400I ay nararapat para sa 6 aplikasyons: Industrial PLC and Factory Control, Motor Control and Motion Systems, Industrial IoT Gateway, Embedded Vision Preprocessing, Sensor Fusion and Data Acquisition, Programmable Communication Equipment.
Industrial PLC and Factory Control
XC7Z007S-1CLG400I fits compact PLC and factory-control platforms because its 667 MHz ARM Cortex-A9 core can run supervisory logic, communications, and configuration tasks while the 23,000-cell Artix-7 fabric handles deterministic sequencing and parallel I/O. The 100 available I/Os support isolated digital channels, encoders, analog interfaces, and industrial communications. In a control cabinet, the -40 °C to +100 °C industrial range is useful, although designers must still verify heat rise from the FPGA fabric and processor activity. Vivado timing constraints, isolated-interface placement, and deterministic interrupt handling are more important than nominal processor speed alone.
Inirekomenda
Motor Control and Motion Systems
The XC7Z007S-1CLG400I is appropriate for motor-control systems that divide real-time work between programmable logic and software. The FPGA fabric can implement deterministic current sampling, pulse generation, encoder decoding, and fault timing, while the Cortex-A9 processor executes higher-level control, diagnostics, and communications. With 23,000 logic cells and 100 I/Os, the device supports multiple control channels without requiring a separate FPGA. The principal trade-off is that every added fabric function consumes logic, routing, memory, and thermal resources, so the design should be partitioned and timing-closed before the PCB is released.
Inirekomenda
Industrial IoT Gateway
XC7Z007S-1CLG400I can serve as the processing core of an industrial IoT gateway where Linux-based connectivity and fieldbus handling need to coexist with hardware-assisted data acquisition. The 667 MHz ARM processor manages protocol stacks, configuration, and network services, while programmable logic accelerates packet filtering, sensor aggregation, or industrial timing. The integrated 256 KB of on-chip RAM supports low-latency working storage, and the 400-CSPBGA package permits a compact module with substantial I/O connectivity. Designers should reserve memory correctly, protect configuration and boot paths, and avoid using fabric resources in ways that compromise processor timing or thermal margins.
Inirekomenda
Embedded Vision Preprocessing
The XC7Z007S-1CLG400I is suitable for early-stage embedded vision preprocessing when a system needs sensor acquisition, filtering, thresholding, or frame reduction before software-level analysis. The programmable-logic fabric can execute parallel pixel operations with deterministic latency, while the 667 MHz Cortex-A9 core controls sensors, buffers data, and communicates with a host or network. Its 100 I/Os can support camera interfaces and auxiliary control signals, although external memory may be needed for larger frame buffers. Power, memory bandwidth, and exposed-pin routing are the main design constraints, particularly when the device is installed inside a sealed enclosure.
Inirekomenda
Sensor Fusion and Data Acquisition
XC7Z007S-1CLG400I fits multi-channel sensor-fusion and data-acquisition equipment because its FPGA fabric can capture, filter, and timestamp parallel sensor streams while the ARM subsystem performs calibration, event analysis, and host communication. The 23,000 logic cells provide parallel processing capacity, and the 100 I/Os support numerous digital sensors, counters, and trigger inputs. Its 667 MHz processor also allows moderate local computation without an external processor. Designers should define clocking and trigger domains carefully, include reset synchronization for off-board sources, and check memory bandwidth when moving large sample batches between fabric, processor, and external memory.
Inirekomenda
Programmable Communication Equipment
The XC7Z007S-1CLG400I is useful in communication equipment that combines a hosted processor stack with hardware-assisted protocol processing. The Cortex-A9 core can manage a network stack, control data, and diagnostics, while programmable logic accelerates framing, filtering, serialization, or low-latency packet handling. Its 23,000 logic cells and 100 I/Os allow multiple interfaces to be integrated in a 17 x 17 mm package. The same-package CLG400 alternatives support different temperature and speed trade-offs, but the selected grade must meet line-rate timing. Place memory and high-speed interfaces according to AMD guidance, and validate eye diagrams, reference-clock jitter, and signal integrity at the board level.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for XC7Z007S-1CLG400I — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | XC7Z007S-1CLG400C | XC7Z007S-1CLG400E | XC7Z007S-2CLG400C | XC7Z007S-2CLG400I | XC7Z007S-2CLG400E |
|---|---|---|---|---|---|---|
| Package | 400-CSPBGA (CLG400) | 400-CSPBGA (CLG400) | 400-CSPBGA (CLG400) | 400-CSPBGA (CLG400) | 400-CSPBGA (CLG400) | 400-CSPBGA (CLG400) |
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Processor Core | 1 x ARM Cortex-A9 | 1 x ARM Cortex-A9 | 1 x ARM Cortex-A9 | 1 x ARM Cortex-A9 | 1 x ARM Cortex-A9 | 1 x ARM Cortex-A9 |
| Maximum Processor Frequency | 667 MHz | 667 MHz | 667 MHz | 500 MHz | 500 MHz | 500 MHz |
| FPGA Logic Cells | 23,000 logic cells | 23,000 logic cells | 23,000 logic cells | 23,000 logic cells | 23,000 logic cells | 23,000 logic cells |
| On-Chip Memory | 256 KB | 256 KB | 256 KB | 256 KB | 256 KB | 256 KB |
| User I/O Count | 100 I/Os | 100 I/Os | 100 I/Os | 100 I/Os | 100 I/Os | 100 I/Os |
| Speed Grade | -1 | -1 | -1 | -2 | -2 | -2 |
| Temperature Grade | Industrial, -40 °C to +100 °C | Commercial | Extended | Commercial | Industrial, -40 °C to +100 °C | Extended |
| Process Technology | 28 nm | 28 nm | 28 nm | 28 nm | 28 nm | 28 nm |
Pangunahing mga Pagkakaiba
- Higher processor performance than the -2-grade CLG400 alternatives (kumpara saXC7Z007S-2CLG400I)
- Industrial temperature coverage without the cost of the extended-temperature grade (kumpara saXC7Z007S-1CLG400E)
- Maintains industrial capability when moving to the -2 speed grade (kumpara saXC7Z007S-2CLG400C)
- Single-Cortex architecture with substantial programmable-logic capacity (kumpara saXC7Z010-1CLG400I)
Talaan ng Disenyo
Use the AMD CLG400 package files and pinout CSV when assigning the 400 BGA balls; do not infer a board footprint from a generic BGA drawing. Reserve all power and ground balls according to the device guidance, place the prescribed decoupling capacitors close to their associated balls, and maintain the required ball-pad and via geometry for assembly. Validate escape routing and the complete stack-up in the PCB tool before release.
Separate processor, programmable-logic, and I/O supply requirements exactly as specified by AMD. Confirm the selected VCAP, VCCINT, VCCAUX, and peripheral-rail values in the device documentation rather than deriving them from another CLG400 design. Use the manufacturer-recommended power-source impedance and filtering topology, and verify the power budget at worst-case processor activity, high fabric utilization, and maximum I/O transition activity.
Estimate junction temperature from the selected power grade’s worst-case total device power and the PCB’s effective thermal resistance. A 17 x 17 mm CSPBGA needs a deliberate copper and heat-spreading strategy, particularly in sealed industrial equipment. Route heat away from sensitive components, evaluate worst-case ambient temperature, and use Vivado thermal reporting to identify fabric hotspots before the PCB layout is frozen.
Do not treat a CLG400 package match as proof of an identical replacement. The -1 and -2 speed grades alter timing and processor performance, while C, I, and E suffixes alter the environmental envelope. Create a new Vivado target for the exact replacement MPN, rerun synthesis and implementation, inspect timing and clocking, rebuild bootable images if required, and repeat hardware testing under the intended environmental conditions.
Apply the device-specific routing rules for high-speed memory, clocks, and serial interfaces instead of relying on generic BGA escape-routing rules. Use the published ball-map and package guidance to select via transitions, keep clock routes short and symmetric, and control return paths beneath high-speed lanes. Post-layout extraction and signal-integrity simulation are particularly important when external memory, high-speed fabric interfaces, or long board-level connections are present.
Impormasyon ng Pagsunod sa Kautusan
No definitive RoHS, REACH, lead-free, halogen-free, or conflict-minerals statement was established for the exact ordering code. AEC-Q100 is not applicable to this industrial FPGA SoC.