XC7Z007S-2CLG400E - 766MHz Zynq SoC FPGA | AMD
MPN: XC7Z007S-2CLG400E ✓ NakahandaXC7Z007S-2CLG400E Ulas
A Zynq SoC FPGA combines a programmable FPGA fabric with an embedded Arm processor system on one device. The FPGA belongs to the Artix-7 programmable-logic hierarchy, while the processing subsystem supplies software execution, control, and hardware-accelerated application functions. This integration places the processor and programmable logic in one package, reducing interconnections compared with a discrete processor and FPGA arrangement while retaining both software flexibility and parallel hardware capability.
Key features include a single ARM Cortex-A9 MPCore processor, a stated maximum frequency of 766 MHz, 23K logic cells, and 100 I/O. The 400-CSPBGA package supports compact embedded designs requiring both processor-based control and programmable logic. According to the Zynq-7000 SoC overview, XC7Z007S devices are intended to extend the scalable Zynq-7000 platform into lower-cost, integrated embedded-processing applications.
The architecture supports a hardware/software design partition: the Cortex-A9 side handles operating systems, control functions, protocols, and application logic, while the Artix-7 fabric implements parallel datapaths, custom peripherals, accelerators, or interface logic. The exact processor clock, logic-cell figure, and I/O count identify this device as the smallest listed member of the XC7Z007S family, making it appropriate for control-intensive embedded systems rather than designs requiring the resources of larger Zynq devices.
Typical uses include industrial IoT equipment, motor control, embedded vision, communications gateways, and compact edge-processing systems. A motor-control design could place deterministic algorithms in programmable logic while the processor manages sequencing and diagnostics. An embedded-vision system could use fabric resources for parallel pixel processing and the processor for control. The 100-I/O complement supports external memory, communication interfaces, sensors, and actuators when board-level routing and speed requirements permit.
Designers should treat the 400-CSPBGA package as a demanding fine-pitch assembly and follow AMD package files, escape-routing guidance, and the device pinout data before layout. Power, decoupling, DDR memory routing, clocking, and high-speed signal integrity require careful PCB planning. Configuration, startup, and thermal performance also depend on the selected platform and operating environment, so the target reference design and AMD device documentation should guide implementation.
This product page combines the exact device identity, family architecture, package information, drop-in ordering-code comparisons, and practical implementation guidance to support component selection before the detailed FPGA design begins.
Mga alternatibo na pwedeng ilagay na XC7Z007S-2CLG400E — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok XC7Z007S-2CLG400E (parehas na form factor at footprint) — pagkakaiba sa Device Type, Logic Cells, Maximum Processor Frequency, Operating Temperature Range, Package.
XC7Z007S-1CLG400C
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →XC7Z007S-1CLG400I
✅ Drop-In ⚠️ Mga Talaan Hindi NaiwerikmoMagkontak para sa presyo
Tingnan ang Datasheet →XC7Z007S-1CLG400E
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
XC7Z007S-2CLG400C
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
XC7Z007S-2CLG400I
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →XC7Z007S-2CLG400E Mga Pinakamataas na Rating at Electrical Characteristics
| Device Type | Zynq-7000S system-on-chip FPGA |
| FPGA Family | Artix-7 |
| Embedded Processor | Single ARM Cortex-A9 MPCore processor |
| Maximum Processor Frequency | 766 MHz |
| Debug Support | CoreSight |
| Logic Cells | 23K |
| Input/Output Count | 100 I/O |
| Package Type | 400-CSPBGA |
| Package Dimensions | 17 x 17 mm |
| Process Technology | 28 nm |
| Hanay ng Temperature na Operasyon | 0 °C to 100 °C |
| Device Variant | XC7Z007S |
| Speed Grade | -2 |
| Temperature Grade | Extended |
Gabay sa Pin Configuration ng XC7Z007S-2CLG400E 17 x 17 mm
Pin configuration para sa XC7Z007S-2CLG400E (17 x 17 mm package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.
Wala ng detalyadong pinout data na magagamit para sa XC7Z007S-2CLG400E.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
XC7Z007S-2CLG400E ay nararapat para sa 6 aplikasyons: Industrial IoT Gateway, Motor Control System, Embedded Vision and Image Processing, Communications Gateway, Programmable Logic Accelerator, Industrial Sensor Node.
Industrial IoT Gateway
The XC7Z007S-2CLG400E is suitable for a compact industrial IoT gateway because it combines a single 766 MHz ARM Cortex-A9 MPCore processor with 23K Artix-7 logic cells in one device. Software can manage network protocols, local storage, diagnostics, and remote configuration, while programmable logic can accelerate packet filtering, data formatting, or peripheral bridging. Its 100 I/O provides connections for Ethernet or serial interfaces, sensors, and status indicators. The stated 0 °C to 100 °C range supports extended-temperature equipment, although the final design must satisfy the enclosure temperature, power budget, and AMD timing constraints.
Inirekomenda
Motor Control System
The XC7Z007S-2CLG400E can implement a compact motor-control architecture by placing time-critical PWM, capture, and interface functions in the 23K Artix-7 fabric while the 766 MHz Cortex-A9 processor performs higher-level sequencing, diagnostics, and communications. The 100 I/O supports encoder inputs, control signals, and supervisory interfaces. Its extended-temperature ordering class is relevant to industrial equipment, but engineers must verify motor-drive isolation, grounding, timing margins, and protective circuitry outside the FPGA.
Inirekomenda
Embedded Vision and Image Processing
For embedded-vision preprocessing, the XC7Z007S-2CLG400E permits parallel image operations to run in the Artix-7 fabric while the single Cortex-A9 core handles configuration, classification, buffering, and external communication. The device's 23K logic cells are suitable for modest pixel pipelines or interface-specific accelerators, while 100 I/O can connect image sensors, capture devices, and local storage. The 766 MHz processor and dedicated logic fabric allow software and hardware functions to be partitioned without using two separate devices, though memory bandwidth and sensor-interface timing must be evaluated in Vivado.
Inirekomenda
Communications Gateway
The XC7Z007S-2CLG400E can serve as a protocol-conversion or communications gateway by combining an ARM-based control plane with FPGA logic for parallel data handling. The Cortex-A9 side can run network stacks, configuration agents, and monitoring, while programmable logic can implement framing, buffering, filtering, or custom serial interfaces. Its 100 I/O and 400-CSPBGA package support integration into compact equipment. For production designs, validate external transceiver characteristics, impedance-controlled routing, clock topology, and the available I/O-bank voltage combinations against the device constraints.
Inirekomenda
Programmable Logic Accelerator
The XC7Z007S-2CLG400E is useful when a control processor must offload repetitive or parallel operations to dedicated hardware. The 23K Artix-7 fabric can implement CRC generation, data sorting, filter stages, encryption engines, or custom accelerators, while the 766 MHz Cortex-A9 processor manages setup and data movement. This heterogeneous partition improves throughput without duplicating a processor and FPGA in separate packages. Designers should use AMD synthesis and implementation results to establish achievable clock rates, resource utilization, power, and thermal margins for the selected -2 speed grade.
Inirekomenda
Industrial Sensor Node
The XC7Z007S-2CLG400E fits an industrial sensor node that must acquire local measurements, apply control logic, and communicate results through a constrained embedded platform. The ARM Cortex-A9 processor can coordinate sampling and network activity, while the programmable fabric handles timers, filtering, or custom sensor interfaces. With 100 I/O and a stated 0 °C to 100 °C operating range, the device supports compact, extended-temperature instrumentation. The PCB still needs careful power planning, sensor grounding, ESD protection, and signal conditioning appropriate to the measured quantity and installation environment.
Inirekomenda
Impormasyon ng Talumpati sa Engineering for XC7Z007S-2CLG400E — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | XC7Z007S-1CLG400C | XC7Z007S-1CLG400I | XC7Z007S-1CLG400E | XC7Z007S-2CLG400C | XC7Z007S-2CLG400I |
|---|---|---|---|---|---|---|
| Package | 400-CSPBGA (17 x 17 mm) | 400-CSPBGA | 400-CSPBGA | 400-CSPBGA | 400-CSPBGA | 400-CSPBGA |
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Device Variant | XC7Z007S | XC7Z007S | XC7Z007S | XC7Z007S | XC7Z007S | XC7Z007S |
| Speed Grade | -2 | -1 | -1 | -1 | -2 | -2 |
| Temperature Ordering Class | Extended | Commercial | Industrial | Extended | Commercial | Industrial |
| Processor | Single ARM Cortex-A9 MPCore | Single ARM Cortex-A9 MPCore | Single ARM Cortex-A9 MPCore | Single ARM Cortex-A9 MPCore | Single ARM Cortex-A9 MPCore | Single ARM Cortex-A9 MPCore |
| Logic Cells | 23K | 23K | 23K | 23K | 23K | 23K |
| Input/Output Count | 100 I/O | 100 I/O | 100 I/O | 100 I/O | 100 I/O | 100 I/O |
| Programmable Logic Family | Artix-7 | Artix-7 | Artix-7 | Artix-7 | Artix-7 | Artix-7 |
Pangunahing mga Pagkakaiba
- Higher speed grade than the -1 ordering options (kumpara saXC7Z007S-1CLG400C)
- Extended-temperature ordering class (kumpara saXC7Z007S-2CLG400C)
- Same resource-rich architecture across speed and temperature orderings (kumpara saXC7Z007S-2CLG400I)
Talaan ng Disenyo
Use the AMD XC7Z007S CLG400 package files as the authority for ball assignment, power rails, and escape routing. A 400-CSPBGA on a 17 x 17 mm substrate requires deliberate layer-transition planning, and the PCB should account for assembly capability, solder-mask and paste design, thermal vias, and inspection access. Do not derive the land pattern from the package dimensions alone.
Plan separate power rails and local decoupling according to the AMD device power-supply requirements, including the processor subsystem, programmable logic, and I/O banks. Validate the power tree against the selected Vivado implementation results rather than assuming that the -2 grade has a fixed current draw. High-current supply paths should have low loop area, while each rail requires suitable bulk and high-frequency decoupling.
Route memory and other high-speed interfaces as controlled-impedance layers with continuous reference planes and minimal return-path discontinuities. Keep DDR data groups topology-aware, follow AMD length-matching and via guidance, and validate the final layout with the appropriate Vivado flow. The 100 I/O count is not a guarantee that every interface can operate at the desired rate because package banking and pin assignment constrain permissible combinations.
Estimate junction temperature from total device power, board thermal resistance, and the actual enclosure environment. Place thermal vias beneath exposed package features where the AMD package guidance permits them, and avoid creating a copper or airflow obstruction. The XC7Z007S-2CLG400E ordering class supports a stated 0 °C to 100 °C operating range, but board temperature gradients and enclosure heating can reduce available margin.
Impormasyon ng Pagsunod sa Kautusan
The product information does not explicitly state the compliance results required for this device. Confirm current declarations and material-compliance documentation with AMD before production release.