XC7Z014S-1CLG400C - 667MHz 65K Logic Cell Zynq SoC | AMD
MPN: XC7Z014S-1CLG400C ✓ NakahandaXC7Z014S-1CLG400C Ulas
A Zynq system-on-chip is an adaptive SoC that bridges the ARM Cortex-A9 embedded-processing hierarchy and the programmable-logic hierarchy of an FPGA. The processor system runs operating-system and control software, while the Artix-7 fabric implements parallel data paths, hardware accelerators, interfaces, and real-time signal processing. This combination can reduce component count and data-transfer overhead in connected embedded systems.
The principal device resources include 65K logic cells, a 667 MHz single-core ARM Cortex-A9 MPCore configuration, and CoreSight debug capability. The 400-CSPBGA package provides a compact 17 x 17 mm surface-mount solution for advanced embedded platforms. Connectivity described for the Zynq-7000 family includes CAN bus, Ethernet, I2C, MMC/SD/SDIO, SPI, UART/USART, USB OTG, and EBI/EMI interfaces.
The -1 speed designation identifies the -1 performance grade, while CLG400 denotes the 400-ball package configuration and C identifies the commercial-temperature option. Design work therefore requires checking the complete device ordering information, bank voltages, package ball assignments, supported memory interfaces, and exposed-pad requirements in the AMD Zynq-7000 documentation before schematic and PCB release.
Typical uses include industrial vision, networked control, embedded analytics, communications equipment, sensor processing, and compact edge-computing systems. The processor can manage control-plane software and networking, while the FPGA fabric can execute parallel filtering, image processing, protocol handling, or other latency-sensitive operations. This separation of sequential and parallel workloads is the central architectural benefit of the Zynq-7000 family.
A robust design should assign power, ground, and high-speed memory pins according to the official package guidance and keep sensitive interfaces away from noisy switching paths. Designers should also verify Vivado device support, tool-version compatibility, clocking requirements, and exposed-pad thermal implementation for the selected board stack-up.
This page combines device identification, package and resource details, drop-in ordering variants, application guidance, and engineering-oriented comparisons. It is intended to accelerate initial device selection while directing final engineering decisions to the manufacturer data sheet, package pinout files, and UG865 package guidance.
Mga alternatibo na pwedeng ilagay na XC7Z014S-1CLG400C — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok XC7Z014S-1CLG400C (parehas na form factor at footprint) — pagkakaiba sa Device Type, FPGA Logic Cells, Mounting Type, Processor Core, Speed Grade.
XC7Z014S-1CLG400I
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →XC7Z014S-2CLG400C
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
XC7Z014S-2CLG400I
✅ Drop-In ⚠️ Mga Talaan Hindi NaiwerikmoMagkontak para sa presyo
Tingnan ang Datasheet →XC7Z014S-1CLG400E
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
XC7Z014S-2CLG400E
✅ Drop-In ⚠️ Mga Talaan Hindi NaiwerikmoMagkontak para sa presyo
Tingnan ang Datasheet →XC7Z014S-1CLG400C Mga Pinakamataas na Rating at Electrical Characteristics
| Device Type | Zynq-7000 Artix-7 adaptive SoC |
| Processor Core | Single ARM Cortex-A9 MPCore |
| Processor Clock | 667 MHz |
| Debug Technology | CoreSight |
| FPGA Logic Cells | 65K logic cells |
| FPGA Family | Artix-7 |
| Packhaging | 400-CSPBGA (17 x 17 mm) |
| Number of Package Balls | 400 balls |
| Uri ng Pagpapasok | Surface mount |
| Temperature Grade | Commercial |
| Performance Grade | -1 |
| Connectivity | CAN bus, Ethernet, I2C, MMC/SD/SDIO, SPI, UART/USART, USB OTG, and EBI/EMI |
| Programming | Programmable logic and ARM Cortex-A9 software processing |
| Orderable Package Code | CLG400 |
| Katayuan ng Lifecycle | Active |
Gabay sa Pin Configuration ng XC7Z014S-1CLG400C clg400
Pin configuration para sa XC7Z014S-1CLG400C (clg400 package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.
Wala ng detalyadong pinout data na magagamit para sa XC7Z014S-1CLG400C.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
XC7Z014S-1CLG400C ay nararapat para sa 6 aplikasyons: Industrial Machine Vision, Industrial Control and Automation, Edge Analytics Gateway, Communications Equipment, Sensor and Signal Processing, Secure Embedded Processor Platform.
Industrial Machine Vision
The XC7Z014S-1CLG400C fits industrial vision systems that combine image acquisition, preprocessing, control, and communications. Its 65K logic cells can accelerate parallel pixel operations, while the single 667 MHz ARM Cortex-A9 MPCore can execute device control, networking, and higher-level application logic. Keeping these functions in one Zynq-7000 device can avoid transferring large image frames between separate processors and FPGAs. The 400-CSPBGA package also supports compact camera and inspection modules without requiring the larger packages used by higher-density Zynq devices. Final implementation must follow AMD package-routing guidance for memory, power, and high-speed interfaces.
Inirekomenda
Industrial Control and Automation
The XC7Z014S-1CLG400C is suitable for programmable automation controllers that combine deterministic hardware logic with embedded operating-system software. Ethernet, UART/USART, SPI, I2C, CAN bus, and USB OTG connectivity allow the SoC to coordinate sensors, actuators, service interfaces, and supervisory controls. The ARM Cortex-A9 side handles configuration, diagnostics, and communication protocols, while the FPGA fabric can execute time-critical sequencing or signal conditioning in parallel. This division improves responsiveness without requiring two independent chips and interconnects. Firmware and HDL teams should partition functions during architecture planning and validate timing with Vivado before hardware implementation.
Inirekomenda
Edge Analytics Gateway
The XC7Z014S-1CLG400C can serve as the processing core of a compact edge gateway by running network services on the 667 MHz Cortex-A9 processor and offloading filtering, framing, compression, or protocol parsing to its 65K logic cells. Ethernet, USB OTG, and serial interfaces support local equipment and sensor connectivity, while programmable logic can maintain predictable data flow between interfaces. Consolidating these workloads into one adaptive SoC can reduce board area and internal bus traffic. Designers should allocate fixed workloads carefully because the 65K logic-cell fabric is substantially smaller than the fabric available in larger Zynq-7000 members.
Inirekomenda
Communications Equipment
The XC7Z014S-1CLG400C fits communications equipment requiring concurrent packet handling, control software, and hardware-assisted processing. The ARM Cortex-A9 MPCore can manage the control plane, configuration, and management protocols, while FPGA fabric can implement parallel framing, classification, filtering, or interface conversion. Ethernet, CAN bus, UART/USART, and SPI provide options for network, service, and peripheral connections. This mixed workload model is useful where deterministic latency matters but a hard real-time microcontroller alone would be insufficient. Clocking, memory topology, I/O standards, and power budgeting should be evaluated together because fabric speed grades also influence achievable timing.
Inirekomenda
Sensor and Signal Processing
The XC7Z014S-1CLG400C is well suited to multichannel sensor-processing systems where acquisition, filtering, and feature extraction must occur locally. Programmable logic can implement parallel digital filtering, data reduction, or interface timing, while the ARM Cortex-A9 processor performs calibration, classification, logging, and higher-level control. Supporting I2C, SPI, UART/USART, and MMC/SD/SDIO interfaces simplifies connection to sensors, storage, and configuration devices. The commercial-temperature grade is appropriate when the complete product remains within the specified commercial environment. For deployments with wider ambient requirements, the industrial ordering option should be evaluated instead.
Inirekomenda
Secure Embedded Processor Platform
The XC7Z014S-1CLG400C can anchor a secure embedded platform in which the ARM Cortex-A9 MPCore runs the operating system, control applications, and security services while CoreSight supports processor debug workflows. Programmable fabric can implement hardware-assisted data filtering, secure I/O routing, or interface isolation without depending exclusively on software. The compact 400-CSPBGA package helps reduce board area in embedded appliances and control heads. Because debug access, boot security, and memory isolation are architecture-sensitive, the design should apply AMD's recommended security and configuration practices. Exact security feature availability must be confirmed against the selected device documentation.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for XC7Z014S-1CLG400C — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | XC7Z014S-1CLG400I | XC7Z014S-2CLG400C | XC7Z014S-2CLG400I | XC7Z014S-1CLG400E | XC7Z014S-2CLG400E |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 400-CSPBGA (17 x 17 mm) | 400-CSPBGA (17 x 17 mm) | 400-CSPBGA (17 x 17 mm) | 400-CSPBGA (17 x 17 mm) | 400-CSPBGA (17 x 17 mm) | 400-CSPBGA (17 x 17 mm) |
| FPGA Logic Cells | 65K logic cells | 65K logic cells | 65K logic cells | 65K logic cells | 65K logic cells | 65K logic cells |
| Processor Core | Single ARM Cortex-A9 MPCore | Single ARM Cortex-A9 MPCore | Single ARM Cortex-A9 MPCore | Single ARM Cortex-A9 MPCore | Single ARM Cortex-A9 MPCore | Single ARM Cortex-A9 MPCore |
| Processor Clock | 667 MHz | 667 MHz | 667 MHz | 667 MHz | 667 MHz | 667 MHz |
| Performance Grade | -1 | -1 | -2 | -2 | -1 | -2 |
| Temperature Grade | Commercial | Industrial | Commercial | Industrial | Extended | Extended |
| Programmable Logic Family | Artix-7 | Artix-7 | Artix-7 | Artix-7 | Artix-7 | Artix-7 |
| Debug Support | CoreSight | CoreSight | CoreSight | CoreSight | CoreSight | CoreSight |
Pangunahing mga Pagkakaiba
- Commercial-temperature option preserves the exact -1 performance configuration (kumpara saXC7Z014S-1CLG400I)
- Lower performance grade supports designs whose timing requirements do not justify -2 power or speed (kumpara saXC7Z014S-2CLG400C)
- Same architecture and ball-grid package across grade substitutions (kumpara saXC7Z014S-2CLG400I)
- Compact 400-ball package concentrates processor, programmable logic, and multiple interfaces (kumpara saXC7Z014S-1CLG400E)
Talaan ng Disenyo
Use the AMD Zynq-7000 package-device pinout files to assign every CLG400 ball and verify the exposed-pad connection. Place decoupling and power-distribution structures according to the manufacturer power-guidance document, and route high-speed memory and interface escapes before fixing the remaining logic. The package is a 17 x 17 mm 400-ball CSPBGA, so fanout and escape-routing planning are more critical than for a leaded package.
Thermal design must account for both processor activity and programmable-logic utilization because both can contribute to device power. Provide adequate top-side and bottom-side copper heat-spreading paths, follow the AMD exposed-pad land pattern, and use the package thermal information for the final board stack-up. The commercial-temperature suffix limits acceptable ambient conditions, so enclosure temperature and nearby component heating must be evaluated at the worst operating corner.
Create separate power trees for the processor, FPGA fabric, and I/O banks so their voltage requirements can be sequenced and monitored independently. Validate startup current, rail tolerances, load transients, and decoupling against the manufacturer electrical characteristics. A -1 device may meet the design's timing requirement with a lower performance target than a -2 option, so the final speed grade should be selected from Vivado timing results rather than estimated solely from processor clock rate.
Do not substitute speed-grade or temperature-grade suffixes without reviewing the ordering table and environmental requirements. The target is the -1 commercial-temperature CLG400 option; the I, E, and -2 variants preserve the package but differ in grade-specific operating characteristics. Also avoid assuming that identical package names guarantee identical software support: verify that the selected Vivado release and board constraints recognize the exact device ordering code.
Separate high-speed memory, clocks, and communication links from noisy or high-current switching paths, and keep the ARM Cortex-A9 debug and configuration paths clear of avoidable crosstalk. Apply the voltage- and reference-bias requirements for every connected interface during bank planning. Because the device combines a processor system and FPGA fabric, complete the full I/O plan before assigning pins so unused or mispowered banks are not left in an indeterminate state.
Impormasyon ng Pagsunod sa Kautusan
The commercial-temperature designation does not by itself establish RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals compliance. Confirm the declarations for the exact ordering code with the manufacturer.