AMD

XC7Z014S-1CLG400C - 667MHz 65K Logic Cell Zynq SoC | AMD

MPN: XC7Z014S-1CLG400C ✓ Aktif
400-CSPBGA (17 x 17 mm) Package 667 MHz Speed
MOQ: 1 |

XC7Z014S-1CLG400C Genel Bakış

The AMD XC7Z014S-1CLG400C is a Zynq-7000 Artix-7 system-on-chip combining a single ARM Cortex-A9 MPCore processor with CoreSight, 65K logic cells, and FPGA fabric in a 400-ball CSPBGA package measuring 17 x 17 mm. It operates at 667 MHz and integrates programmable hardware acceleration with ARM-based software processing on one device.

A Zynq system-on-chip is an adaptive SoC that bridges the ARM Cortex-A9 embedded-processing hierarchy and the programmable-logic hierarchy of an FPGA. The processor system runs operating-system and control software, while the Artix-7 fabric implements parallel data paths, hardware accelerators, interfaces, and real-time signal processing. This combination can reduce component count and data-transfer overhead in connected embedded systems.

The principal device resources include 65K logic cells, a 667 MHz single-core ARM Cortex-A9 MPCore configuration, and CoreSight debug capability. The 400-CSPBGA package provides a compact 17 x 17 mm surface-mount solution for advanced embedded platforms. Connectivity described for the Zynq-7000 family includes CAN bus, Ethernet, I2C, MMC/SD/SDIO, SPI, UART/USART, USB OTG, and EBI/EMI interfaces.

The -1 speed designation identifies the -1 performance grade, while CLG400 denotes the 400-ball package configuration and C identifies the commercial-temperature option. Design work therefore requires checking the complete device ordering information, bank voltages, package ball assignments, supported memory interfaces, and exposed-pad requirements in the AMD Zynq-7000 documentation before schematic and PCB release.

Typical uses include industrial vision, networked control, embedded analytics, communications equipment, sensor processing, and compact edge-computing systems. The processor can manage control-plane software and networking, while the FPGA fabric can execute parallel filtering, image processing, protocol handling, or other latency-sensitive operations. This separation of sequential and parallel workloads is the central architectural benefit of the Zynq-7000 family.

A robust design should assign power, ground, and high-speed memory pins according to the official package guidance and keep sensitive interfaces away from noisy switching paths. Designers should also verify Vivado device support, tool-version compatibility, clocking requirements, and exposed-pad thermal implementation for the selected board stack-up.

This page combines device identification, package and resource details, drop-in ordering variants, application guidance, and engineering-oriented comparisons. It is intended to accelerate initial device selection while directing final engineering decisions to the manufacturer data sheet, package pinout files, and UG865 package guidance.

Drop-in alternatifler için XC7Z014S-1CLG400C — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

Bu Serideki Variantlar

Yedek parça uyumlu olan aynı serideki modeller XC7Z014S-1CLG400C (aynı form faktörü ve ayağa oturma) — farklı olan Device Type, FPGA Logic Cells, Mounting Type, Processor Core, Speed Grade.

AMD
Device Type: Zynq-7000 system-on-chip with Artix-7 FPGA fabric
Speed Grade: -2
İle Karşılaştır XC7Z014S-1CLG400C →
AMD
Device Type: Zynq-7000S system-on-chip (SoC)
FPGA Logic Cells: Approximately 65,000
Mounting Type: Surface-mount ball grid array
İle Karşılaştır XC7Z014S-1CLG400C →

XC7Z014S-1CLG400I

✅ Yerleştirme
AMD
📦 400-CSPBGA (17 x 17 mm)
Zynq-7000S system-on-chip FPGA · 65K logic cells · Single Arm Cortex-A9 MPCore processor · 667 MHz · CoreSight · Artix-7 FPGA fabric · 400-CSPBGA (17 x 17 mm) · 400 balls

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

XC7Z014S-2CLG400C

✅ Yerleştirme
📦 400-CSPBGA (17 x 17 mm)
Same 65K logic cells and CLG400 footprint with the -2 speed grade instead of -1; processor and logic performance targets are higher.

📋 Katalogda Olmayan Referans Alternatifi

XC7Z014S-2CLG400I

✅ Yerleştirme ⚠️ Onaylanmamış Özellikler
AMD
📦 400-CSPBGA (17 x 17 mm)
Zynq-7000S system-on-chip (SoC) · Single Arm Cortex-A9 MPCore with CoreSight · 766 MHz · Approximately 65,000 · Artix-7 FPGA fabric · -2 · I suffix, industrial grade · 400-CSPBGA

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

XC7Z014S-1CLG400E

✅ Yerleştirme ⚠️ Onaylanmamış Özellikler
📦 400-CSPBGA (17 x 17 mm)
Same 65K logic cells, 667 MHz processor, -1 speed grade, and CLG400 footprint; E temperature suffix replaces commercial C.

📋 Katalogda Olmayan Referans Alternatifi

XC7Z014S-2CLG400E

✅ Yerleştirme ⚠️ Onaylanmamış Özellikler
AMD
📦 400-CSPBGA (17 x 17 mm)
Zynq-7000 system-on-chip with Artix-7 FPGA fabric · Single Arm Cortex-A9 MPCore · CoreSight · 766 MHz · 65K logic cells · Artix-7 · 400-CSPBGA (17 x 17 mm) · 400 balls

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

XC7Z014S-1CLG400C Maksimum Değerlendirmeler & Elektriksel Özellikler

Device Type Zynq-7000 Artix-7 adaptive SoC
Processor Core Single ARM Cortex-A9 MPCore
Processor Clock 667 MHz
Debug Technology CoreSight
FPGA Logic Cells 65K logic cells
FPGA Family Artix-7
Paket 400-CSPBGA (17 x 17 mm)
Number of Package Balls 400 balls
Montaj Türü Surface mount
Temperature Grade Commercial
Performance Grade -1
Connectivity CAN bus, Ethernet, I2C, MMC/SD/SDIO, SPI, UART/USART, USB OTG, and EBI/EMI
Programming Programmable logic and ARM Cortex-A9 software processing
Orderable Package Code CLG400
Yaşam Döngüsü Durumu Active

XC7Z014S-1CLG400C clg400 Pin Yapısı Kılavuzu

XC7Z014S-1CLG400C (clg400 paket) için pin yapısı. Bu dijital IC, GPIO, iletişim arayüzleri (UART, SPI, I2C) ve güç pinleri içerir. Alternatif pin işlevleri ve yapılandırma seçenekleri için üretici veri kitapçığını referans alın. Tünel sistem tasarımı ve PCB yerleşimi için temel bir bileşendir.

clg400 paket pin çizelgesi için XC7Z014S-1CLG400C

Ayrıntılı pin çıkış verisi mevcut değil: XC7Z014S-1CLG400C.

Aşağıdaki veri sayfası tam pin konfigürasyonu için.

Tipik Uygulamalar

XC7Z014S-1CLG400C için uygundur 6 uygulamas: Industrial Machine Vision, Industrial Control and Automation, Edge Analytics Gateway, Communications Equipment, Sensor and Signal Processing, Secure Embedded Processor Platform.

🏭

Industrial Machine Vision

The XC7Z014S-1CLG400C fits industrial vision systems that combine image acquisition, preprocessing, control, and communications. Its 65K logic cells can accelerate parallel pixel operations, while the single 667 MHz ARM Cortex-A9 MPCore can execute device control, networking, and higher-level application logic. Keeping these functions in one Zynq-7000 device can avoid transferring large image frames between separate processors and FPGAs. The 400-CSPBGA package also supports compact camera and inspection modules without requiring the larger packages used by higher-density Zynq devices. Final implementation must follow AMD package-routing guidance for memory, power, and high-speed interfaces.

⚙️

Industrial Control and Automation

The XC7Z014S-1CLG400C is suitable for programmable automation controllers that combine deterministic hardware logic with embedded operating-system software. Ethernet, UART/USART, SPI, I2C, CAN bus, and USB OTG connectivity allow the SoC to coordinate sensors, actuators, service interfaces, and supervisory controls. The ARM Cortex-A9 side handles configuration, diagnostics, and communication protocols, while the FPGA fabric can execute time-critical sequencing or signal conditioning in parallel. This division improves responsiveness without requiring two independent chips and interconnects. Firmware and HDL teams should partition functions during architecture planning and validate timing with Vivado before hardware implementation.

🌐

Edge Analytics Gateway

The XC7Z014S-1CLG400C can serve as the processing core of a compact edge gateway by running network services on the 667 MHz Cortex-A9 processor and offloading filtering, framing, compression, or protocol parsing to its 65K logic cells. Ethernet, USB OTG, and serial interfaces support local equipment and sensor connectivity, while programmable logic can maintain predictable data flow between interfaces. Consolidating these workloads into one adaptive SoC can reduce board area and internal bus traffic. Designers should allocate fixed workloads carefully because the 65K logic-cell fabric is substantially smaller than the fabric available in larger Zynq-7000 members.

📡

Communications Equipment

The XC7Z014S-1CLG400C fits communications equipment requiring concurrent packet handling, control software, and hardware-assisted processing. The ARM Cortex-A9 MPCore can manage the control plane, configuration, and management protocols, while FPGA fabric can implement parallel framing, classification, filtering, or interface conversion. Ethernet, CAN bus, UART/USART, and SPI provide options for network, service, and peripheral connections. This mixed workload model is useful where deterministic latency matters but a hard real-time microcontroller alone would be insufficient. Clocking, memory topology, I/O standards, and power budgeting should be evaluated together because fabric speed grades also influence achievable timing.

🧩

Sensor and Signal Processing

The XC7Z014S-1CLG400C is well suited to multichannel sensor-processing systems where acquisition, filtering, and feature extraction must occur locally. Programmable logic can implement parallel digital filtering, data reduction, or interface timing, while the ARM Cortex-A9 processor performs calibration, classification, logging, and higher-level control. Supporting I2C, SPI, UART/USART, and MMC/SD/SDIO interfaces simplifies connection to sensors, storage, and configuration devices. The commercial-temperature grade is appropriate when the complete product remains within the specified commercial environment. For deployments with wider ambient requirements, the industrial ordering option should be evaluated instead.

🔒

Secure Embedded Processor Platform

The XC7Z014S-1CLG400C can anchor a secure embedded platform in which the ARM Cortex-A9 MPCore runs the operating system, control applications, and security services while CoreSight supports processor debug workflows. Programmable fabric can implement hardware-assisted data filtering, secure I/O routing, or interface isolation without depending exclusively on software. The compact 400-CSPBGA package helps reduce board area in embedded appliances and control heads. Because debug access, boot security, and memory isolation are architecture-sensitive, the design should apply AMD's recommended security and configuration practices. Exact security feature availability must be confirmed against the selected device documentation.

What is the AMD XC7Z014S-1CLG400C?
The AMD XC7Z014S-1CLG400C is a Zynq-7000 Artix-7 adaptive system-on-chip with 65K FPGA logic cells, a single 667 MHz ARM Cortex-A9 MPCore processor, and CoreSight debug capability. It is housed in a 400-CSPBGA package measuring 17 x 17 mm. According to the AMD Zynq-7000 SoC data sheet, the device combines ARM-based sequential processing with programmable-logic fabric for parallel or hardware-accelerated functions.
What are the key specifications of XC7Z014S-1CLG400C that engineers should know?
The XC7Z014S-1CLG400C combines 65K logic cells, one ARM Cortex-A9 MPCore operating at 667 MHz, and CoreSight debugging in a 400-CSPBGA package measuring 17 x 17 mm. The AMD Zynq-7000 data sheet identifies the -1 performance grade and commercial-temperature ordering option. Family connectivity includes Ethernet, CAN bus, USB OTG, UART/USART, SPI, I2C, MMC/SD/SDIO, and EBI/EMI interfaces.
Where can I download the XC7Z014S-1CLG400C datasheet PDF?
The XC7Z014S-1CLG400C data sheet is available from AMD through the official Zynq-7000 SoC document at docs.amd.com. The document identifier shown in its official URL is ds187, and it covers XC7Z014S together with related Zynq-7000 devices. Use the manufacturer document for electrical characteristics and the AMD package-pinout resource for exact ball assignments and exposed-pad details.
Where can I find the XC7Z014S-1CLG400C pinout and package files?
The official XC7Z014S-1CLG400C pinout information is published through AMD's Zynq-7000 package-device pinout files, whose format is described in UG865. The resource provides ASCII package files in TXT and CSV formats. Use these files to assign every BGA ball, especially power, ground, memory, and exposed-pad connections, before releasing the PCB layout.
Is XC7Z014S-1CLG400C suitable for embedded edge-computing applications?
Yes, the XC7Z014S-1CLG400C is suitable for edge-computing designs that need both control software and programmable hardware acceleration. Its single 667 MHz ARM Cortex-A9 MPCore can run networking, operating-system, and application tasks, while 65K logic cells can implement parallel data processing. The AMD Zynq-7000 architecture is especially useful when data would otherwise need to move repeatedly between a processor and a separate FPGA.
Can XC7Z014S-1CLG400I replace XC7Z014S-1CLG400C?
The XC7Z014S-1CLG400I can provide the same CLG400 footprint, -1 performance grade, 65K logic-cell resource level, and single Cortex-A9 processor configuration, but it is the industrial-temperature option rather than the commercial-temperature XC7Z014S-1CLG400C. Confirm every temperature-sensitive electrical limit and the required qualification level for the end application before treating it as a drop-in replacement.
What is the best drop-in replacement for XC7Z014S-1CLG400C?
The closest ordering-option alternative is the XC7Z014S-1CLG400I because it retains the same 400-CSPBGA package, -1 speed grade, 65K logic cells, and 667 MHz processor configuration while changing the temperature grade from commercial to industrial. The AMD Zynq-7000 package files should be used to confirm that the selected ordering code preserves the required ballout and power configuration.
What can replace XC7Z014S-1CLG400C without changing the PCB?
Several XC7Z014S ordering options use the same CLG400 package and can preserve the physical PCB footprint, including the -1 and -2 speed grades with commercial or industrial temperature codes. A replacement should be selected by matching the required speed, temperature range, and lifecycle expectations rather than treating every suffix change as electrically identical. Confirm the exact ordering table and device support in the selected AMD tool version.
XC7Z014S-1CLG400C vs XC7Z014S-2CLG400C - which is better for timing-critical designs?
The XC7Z014S-2CLG400C is generally the better choice when a design requires the faster -2 performance grade, while the XC7Z014S-1CLG400C remains appropriate when the -1 grade meets the design timing and power budget. Both use the CLG400 package and the same Zynq-7000 device family, but speed-grade selection must be validated against Vivado timing results, clock requirements, and the power budget.
When should I choose XC7Z014S-1CLG400C over XC7Z014S-1CLG400I?
Choose XC7Z014S-1CLG400C for commercial-temperature environments where its specified operating range satisfies the product requirements. Choose XC7Z014S-1CLG400I when industrial-temperature operation is required while retaining the same -1 performance grade and CLG400 footprint. The distinction is environmental qualification rather than a change in the processor clock, logic-cell count, or package geometry.
Is XC7Z014S-1CLG400C the same as XC7Z014S-1CLG400I?
No. The XC7Z014S-1CLG400C and XC7Z014S-1CLG400I share the Zynq-7000 Artix-7 architecture, 65K logic cells, single 667 MHz Cortex-A9 processor, -1 performance grade, and 400-CSPBGA package, but they carry different temperature-grade suffixes. The C version is commercial, while the I version is industrial. Verify worst-case ambient temperature and electrical requirements before substitution.
Where to buy XC7Z014S-1CLG400C online?
Use the Request a Quote form on this page to request the exact AMD XC7Z014S-1CLG400C ordering code, package, quantity, and delivery requirements. The manufacturer identifies the device in a 400-CSPBGA package, while commercial ordering details should be confirmed against the AMD product documentation. The quote form lets the request be reviewed against the required part number without relying on an ambiguous family-level listing.
What is the price of XC7Z014S-1CLG400C?
Submit the required quantity, package, and target delivery information through the Request a Quote form on this page. The XC7Z014S-1CLG400C is a specific 400-CSPBGA ordering configuration with speed and temperature suffixes, so a family-level quote does not guarantee the correct device. The current commercial terms and availability should be confirmed through that form.
What is the lead time for XC7Z014S-1CLG400C?
Request the current lead time using the Request a Quote form on this page and include the required quantity, production schedule, and shipment destination. Lead time can vary with order volume, allocation, and package choice, so it should be confirmed for the exact XC7Z014S-1CLG400C ordering code rather than inferred from the broader Zynq-7000 family.
Is XC7Z014S-1CLG400C in stock?
The current availability of the exact XC7Z014S-1CLG400C should be confirmed through the Request a Quote form on this page. A listing for the Zynq-7000 family or a different speed or temperature suffix does not establish stock for this specific 400-CSPBGA device. Include your required quantity and schedule so the request can be matched to the exact ordering code.
What design checks are required for the XC7Z014S-1CLG400C PCB?
Use the AMD Zynq-7000 package-pinout files to assign all 400 balls and verify the exposed-pad connection, power planes, decoupling, memory routing, and high-speed interface constraints. The AMD UG865 package guidance should also be reviewed for escape-routing and ball-assignment conventions. Release the layout only after checking the selected device suffix against the exact BOM ordering code.

Mühendislik referans verileri: XC7Z014S-1CLG400C — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Choose the XC7Z014S-1CLG400C for a compact commercial-temperature Zynq-7000 design whose processing and hardware requirements are satisfied by a single 667 MHz Cortex-A9 core and 65K logic cells. Select XC7Z014S-1CLG400I when industrial-temperature operation is needed but the -1 performance grade remains adequate. Choose XC7Z014S-2CLG400C or XC7Z014S-2CLG400I when Vivado timing results show that the -1 grade cannot close the design and the higher speed grade is justified. The E-grade variants should be selected only when the required ambient range and product qualification match that grade. Because all listed options use the CLG400 package, PCB reuse is possible, but ordering-code, temperature, speed, tool-support, and electrical-limit checks remain mandatory before substitution.

Alternatiflerle Karşılaştırma

Parametre Bu Ürün XC7Z014S-1CLG400I XC7Z014S-2CLG400C XC7Z014S-2CLG400I XC7Z014S-1CLG400E XC7Z014S-2CLG400E
Brand AMD AMD AMD AMD AMD AMD
Package 400-CSPBGA (17 x 17 mm) 400-CSPBGA (17 x 17 mm) 400-CSPBGA (17 x 17 mm) 400-CSPBGA (17 x 17 mm) 400-CSPBGA (17 x 17 mm) 400-CSPBGA (17 x 17 mm)
FPGA Logic Cells 65K logic cells 65K logic cells 65K logic cells 65K logic cells 65K logic cells 65K logic cells
Processor Core Single ARM Cortex-A9 MPCore Single ARM Cortex-A9 MPCore Single ARM Cortex-A9 MPCore Single ARM Cortex-A9 MPCore Single ARM Cortex-A9 MPCore Single ARM Cortex-A9 MPCore
Processor Clock 667 MHz 667 MHz 667 MHz 667 MHz 667 MHz 667 MHz
Performance Grade -1 -1 -2 -2 -1 -2
Temperature Grade Commercial Industrial Commercial Industrial Extended Extended
Programmable Logic Family Artix-7 Artix-7 Artix-7 Artix-7 Artix-7 Artix-7
Debug Support CoreSight CoreSight CoreSight CoreSight CoreSight CoreSight

Ana Farklılayıcılar

  • Commercial-temperature option preserves the exact -1 performance configuration (karşılaştırma:XC7Z014S-1CLG400I)
  • Lower performance grade supports designs whose timing requirements do not justify -2 power or speed (karşılaştırma:XC7Z014S-2CLG400C)
  • Same architecture and ball-grid package across grade substitutions (karşılaştırma:XC7Z014S-2CLG400I)
  • Compact 400-ball package concentrates processor, programmable logic, and multiple interfaces (karşılaştırma:XC7Z014S-1CLG400E)

Tasarım Notları

Use the AMD Zynq-7000 package-device pinout files to assign every CLG400 ball and verify the exposed-pad connection. Place decoupling and power-distribution structures according to the manufacturer power-guidance document, and route high-speed memory and interface escapes before fixing the remaining logic. The package is a 17 x 17 mm 400-ball CSPBGA, so fanout and escape-routing planning are more critical than for a leaded package.

Thermal design must account for both processor activity and programmable-logic utilization because both can contribute to device power. Provide adequate top-side and bottom-side copper heat-spreading paths, follow the AMD exposed-pad land pattern, and use the package thermal information for the final board stack-up. The commercial-temperature suffix limits acceptable ambient conditions, so enclosure temperature and nearby component heating must be evaluated at the worst operating corner.

Create separate power trees for the processor, FPGA fabric, and I/O banks so their voltage requirements can be sequenced and monitored independently. Validate startup current, rail tolerances, load transients, and decoupling against the manufacturer electrical characteristics. A -1 device may meet the design's timing requirement with a lower performance target than a -2 option, so the final speed grade should be selected from Vivado timing results rather than estimated solely from processor clock rate.

Do not substitute speed-grade or temperature-grade suffixes without reviewing the ordering table and environmental requirements. The target is the -1 commercial-temperature CLG400 option; the I, E, and -2 variants preserve the package but differ in grade-specific operating characteristics. Also avoid assuming that identical package names guarantee identical software support: verify that the selected Vivado release and board constraints recognize the exact device ordering code.

Separate high-speed memory, clocks, and communication links from noisy or high-current switching paths, and keep the ARM Cortex-A9 debug and configuration paths clear of avoidable crosstalk. Apply the voltage- and reference-bias requirements for every connected interface during bank planning. Because the device combines a processor system and FPGA fabric, complete the full I/O plan before assigning pins so unused or mispowered banks are not left in an indeterminate state.

Uyumluluk Bilgisi

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Kadmiyumdan Arınmış
Unknown
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

The commercial-temperature designation does not by itself establish RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals compliance. Confirm the declarations for the exact ordering code with the manufacturer.

Veri doğrulanma tarihi: 2026-11-18 — XAIPART bileşen mühendislik ekibi tarafından doğrulanmış ve derlenmiş veri

İlgili Aramalar

xc7z014s 1clg400c xc7z014s 1clg484c xc7z014s 1clg484i xc7z014s 1clg400i xc7z014s 2clg400i XC7Z014S-1CLG400C datasheet XC7Z014S-1CLG400C pinout XC7Z014S-1CLG400C datasheet pdf AMD XC7Z014S-1CLG400C XC7Z014S-1CLG400C equivalent XC7Z014S-1CLG400C replacement XC7Z014S-1CLG400C footprint XC7Z014S-1CLG400C price XC7Z014S-1CLG400C stock

İlgili Bileşenler ve Terimler

AMD XC7Z014S-1CLG400C XC7Z014S-1CLG400I XC7Z014S-2CLG400C XC7Z014S-2CLG400I XC7Z014S-1CLG400E XC7Z014S-2CLG400E Zynq-7000 Artix-7 FPGA ARM Cortex-A9 MPCore CoreSight system-on-chip adaptive SoC programmable logic 65K logic cells 667 MHz 400-CSPBGA 17 x 17 mm surface mount Ethernet CAN bus USB OTG SPI I2C UART/USART MMC/SD/SDIO EBI/EMI Vivado UG865
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle