XC7Z030-L2SBG485I - 125K Logic Cell Zynq SoC | AMD
MPN: XC7Z030-L2SBG485I ✓ NakahandaXC7Z030-L2SBG485I Ulas
A Zynq-7000 system-on-chip is a programmable logic device with an integrated hard processor system. It sits within the hierarchy of FPGA and CPLD devices, combines a programmable logic fabric with an ARM processing subsystem, and provides a single-chip platform for hardware acceleration, control logic, networking, and embedded software. This integration can reduce the number of discrete devices required in a system while allowing designers to partition processing-intensive tasks between software and programmable logic.
The XC7Z030 provides 125K logic cells and dual ARM Cortex-A9 MPCore processing with CoreSight support. Its 800 MHz operating frequency supports embedded control and application workloads, while the Kintex-7 logic fabric allows accelerators, interfaces, and real-time data paths to be implemented in hardware. The -2 speed designation identifies its performance grade within the Zynq-7000 ordering scheme, while the I suffix identifies the industrial-temperature product version.
The SoC architecture is significant because the ARM processor and FPGA fabric communicate through a dedicated AXI interconnect rather than through a conventional external processor-to-FPGA bus. Software can control fabric-based hardware blocks, and deterministic logic can handle timing-sensitive functions outside the software execution path. The listed 28 nm process generation and 125K-cell fabric place the XC7Z030 between smaller Zynq devices and larger programmable-logic platforms.
Typical uses include industrial image processing, factory automation, embedded vision, communications infrastructure, programmable logic controllers, and mixed processor-logic systems. A dual-core ARM subsystem can run operating-system-level software and network services, while the FPGA fabric can implement parallel datapaths, protocol handling, sensor acquisition, or hardware-assisted cryptography.
The principal design consideration is board-level integration. The FCBGA package requires a carefully controlled PCB stack-up, power delivery network, decoupling network, and high-density escape routing. Designers should follow the AMD Zynq-7000 package and PCB guidance, including the package pinout files and DS191 device documentation, before assigning power, ground, clock, and high-speed interface pins.
This product record combines the published device identity and architecture with verified package resources, order-code comparison guidance, and practical implementation considerations. It also distinguishes exact package and speed-grade variants so engineers can identify a candidate that can be evaluated for a board-level replacement rather than relying on family-name similarity alone.
Mga alternatibo na pwedeng ilagay na XC7Z030-L2SBG485I — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok XC7Z030-L2SBG485I (parehas na form factor at footprint) — pagkakaiba sa Package, Mounting Type, Processor Core, Device Type, Process Technology.
XC7Z030-2SBG485I
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →XC7Z030-1SBG485I
✅ Drop-In ⚠️ Mga Talaan Hindi NaiwerikmoMagkontak para sa presyo
XC7Z030-1SBG485C
✅ Drop-In ⚠️ Mga Talaan Hindi NaiwerikmoMagkontak para sa presyo
Tingnan ang Datasheet →XC7Z030-3SBG485I
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
XC7Z030-2SBG485C
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
XC7Z030-L2SBG485I Mga Pinakamataas na Rating at Electrical Characteristics
| Device Type | Zynq-7000 Kintex-7 programmable system-on-chip |
| Processor Core | Dual ARM Cortex-A9 MPCore |
| CoreSight Support | Supported |
| Maximum Processor Frequency | 800 MHz |
| FPGA Logic Cells | 125K logic cells |
| FPGA Family | Kintex-7 |
| Programmable Logic Type | FPGA |
| Process Technology | 28 nm |
| Nominal Supply Voltage | 1 V |
| Packhaging | 484-FCBGA (19 x 19 mm) |
| Package Designator | SBG485 |
| Temperature Grade | Industrial grade |
| Speed Grade | -2 |
| Ordering Suffix | I |
| Architecture | All-Programmable SoC |
| Programmable Logic | Kintex-7 FPGA fabric |
| Uri ng Pagpapasok | Surface mount |
Gabay sa Pin Configuration ng XC7Z030-L2SBG485I sbg485
Pin configuration para sa XC7Z030-L2SBG485I (sbg485 package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.
Wala ng detalyadong pinout data na magagamit para sa XC7Z030-L2SBG485I.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
XC7Z030-L2SBG485I ay nararapat para sa 6 aplikasyons: Industrial Machine Vision, Factory Automation and Control, Industrial Communication Gateway, Embedded Networking Equipment, Programmable Logic Controller, Aerospace and Defense Control System.
Industrial Machine Vision
The XC7Z030-L2SBG485I fits machine-vision systems that require image acquisition and processing to be divided between programmable logic and an embedded processor. The 125K Kintex-7 logic cells can host parallel pixel pipelines, thresholding, filtering, or interface converters, while the dual ARM Cortex-A9 cores running at up to 800 MHz can manage control software and higher-level decisions. The FCBGA package keeps the heterogeneous processing resources within one 19 x 19 mm device, but the design must allocate separate power budgets for the ARM subsystem and FPGA fabric. A controlled BGA layout, direct decoupling, and adequate thermal spreading are essential for sustained industrial operation.
Inirekomenda
Factory Automation and Control
The XC7Z030-L2SBG485I is suitable for factory controllers that must coordinate deterministic I/O with embedded control software. Programmable logic can implement real-time motor timing, encoder capture, safety-adjacent interlocks, or high-speed industrial protocol interfaces, while the dual ARM Cortex-A9 subsystem supports communications, diagnostics, and supervisory control. Integrating both domains in one 125K-cell SoC can simplify the hardware architecture compared with separate processing elements. The -2 speed grade should be checked against FPGA timing margins, and the industrial I suffix should be considered alongside the final enclosure temperature. Power sequencing and independent rail validation remain essential during board bring-up.
Inirekomenda
Industrial Communication Gateway
The XC7Z030-L2SBG485I can serve as the processing center of an industrial communication gateway by combining an 800 MHz dual-core ARM subsystem with 125K programmable logic cells. Linux-class software can handle network management and protocol stacks, while the FPGA fabric accelerates packet framing, data filtering, buffering, or custom physical-layer functions. The 19 x 19 mm FCBGA package allows substantial functionality without using multiple large logic devices, although high-speed interfaces require disciplined impedance control and return-path design. Engineers should separate processor and FPGA power budgets, avoid routing sensitive clocks across split planes, and validate timing for every enabled transceiver against the selected -2 speed grade.
Inirekomenda
Embedded Networking Equipment
The XC7Z030-L2SBG485I is appropriate for embedded network equipment that divides control-plane software from high-throughput data processing. The dual ARM Cortex-A9 cores can run networking services, configuration logic, and management tasks, while the Kintex-7 fabric can accelerate queues, filtering, compression, or custom packet processing. Its 125K logic cells provide a useful middle ground between small microcontrollers and much larger SoCs. A production design should use the AMD Zynq-7000 memory and pinout guidance, validate signal integrity on each high-speed interface, and model processor and FPGA utilization together so clocking, routing, and thermal margins remain adequate under worst-case traffic.
Inirekomenda
Programmable Logic Controller
The XC7Z030-L2SBG485I combines a deterministic FPGA fabric with an ARM processor in a package suited to advanced programmable logic controllers. The 125K logic cells can implement concurrent I/O, timing, motion-control, or safety logic, while the dual-core processor handles HMI data, communications, diagnostics, and configuration. The SoC approach allows a single hardware platform to combine hard real-time behavior with software flexibility. Design work should include formal timing constraints for critical logic, independent brownout monitoring, organized boot and firmware-update paths, and a thermal plan suitable for the industrial-temperature order code. Pin assignments must come from the SBG485 package files rather than a generic Zynq diagram.
Inirekomenda
Aerospace and Defense Control System
The XC7Z030-L2SBG485I can be evaluated for aerospace, defense, and rugged embedded systems that need a hard processor subsystem alongside programmable logic. The ARM cores can support supervisory control, diagnostics, and non-real-time processing, while the 125K FPGA fabric can implement deterministic acquisition, signal conditioning, or interface protocols. The industrial-temperature suffix does not by itself establish aerospace qualification, so the exact device, package, radiation, temperature, and screening requirements must be reviewed against the appropriate AMD documentation. Board designers should plan for controlled power rails, careful BGA escape routing, fault monitoring, and thermal analysis under the intended mission profile.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for XC7Z030-L2SBG485I — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | XC7Z030-2SBG485I | XC7Z030-1SBG485I | XC7Z030-1SBG485C | XC7Z030-3SBG485I | XC7Z030-2SBG485C |
|---|---|---|---|---|---|---|
| Package | 484-FCBGA (19 x 19 mm), SBG485 | 484-FCBGA (19 x 19 mm), SBG485 | 484-FCBGA (19 x 19 mm), SBG485 | 484-FCBGA (19 x 19 mm), SBG485 | 484-FCBGA (19 x 19 mm), SBG485 | 484-FCBGA (19 x 19 mm), SBG485 |
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Processor | Dual ARM Cortex-A9 MPCore | Dual ARM Cortex-A9 MPCore | Dual ARM Cortex-A9 MPCore | Dual ARM Cortex-A9 MPCore | Dual ARM Cortex-A9 MPCore | Dual ARM Cortex-A9 MPCore |
| Logic Cells | 125K logic cells | 125K logic cells | 125K logic cells | 125K logic cells | 125K logic cells | 125K logic cells |
| Maximum Processor Frequency | 800 MHz | 800 MHz | 800 MHz | 800 MHz | 800 MHz | 800 MHz |
| FPGA Speed Grade | -2 | -2 | -1 | -1 | -3 | -2 |
| Temperature Suffix | I industrial grade | I industrial grade | I industrial grade | C commercial grade | I industrial grade | C commercial grade |
| Process Technology | 28 nm | 28 nm | 28 nm | 28 nm | 28 nm | 28 nm |
| CoreSight | Supported | Supported | Supported | Supported | Supported | Supported |
| Special Order-Code Feature | L-prefixed -2 industrial order code | Compact -2 industrial order code | -1 industrial order code | -1 commercial order code | -3 industrial order code | -2 commercial order code |
Pangunahing mga Pagkakaiba
- Combines a dual-core ARM processor and programmable logic in one device (kumpara saXC7Z030-2SBG485I)
- Maintains the target processor and logic resources across speed-grade alternatives (kumpara saXC7Z030-1SBG485I)
- Provides a direct package-match path for industrial systems (kumpara saXC7Z030-2SBG485C)
- Supports higher FPGA timing class without changing the core architecture (kumpara saXC7Z030-1SBG485I)
Talaan ng Disenyo
Treat the SBG485 FCBGA as a high-density routing problem. Use the AMD package-device pinout files and package drawing to define every power, ground, reference, clock, and I/O ball before layout. Assign the board stack-up and escape-routing strategy before placing the BGA, then maintain uninterrupted reference planes and continuous return paths beneath high-speed interfaces. Validate layer transitions, via construction, solder-mask design, and assembly constraints with the selected PCB fabricator.
Create separate power budgets for the ARM processing system and Kintex-7 programmable logic because activity levels and design utilization can change current demand independently. Follow the DS191 power-rail requirements for sequencing, voltage selection, decoupling, and monitoring. Place bulk and local decoupling according to the manufacturer layout guidance, keep sensitive reference connections short, and test startup and shutdown at maximum processor activity. Do not select a regulator from average power alone.
Estimate thermal performance at the enclosure level rather than using processor frequency as a proxy for total power. Populate the full FPGA fabric, exercise both ARM cores, enable high-speed I/O, and include the activity expected in the worst mission condition. Use the package thermal model with the actual PCB stack-up, copper area, vias, airflow, and ambient temperature. If the computed junction margin is small, improve spreading or reduce activity through design-level clocking and workload management.
Separate clocks, memory interfaces, programmable logic interfaces, and sensitive references during floorplanning. Keep the ARM memory interfaces on tightly controlled layers with continuous reference planes, and place the Zynq configuration and clocking circuitry where its pins and BGA escape paths remain predictable. Constrain all critical interfaces at the selected speed grade, then verify post-route timing under the full design rather than relying only on block-level synthesis reports.
Do not treat a matching package name as sufficient proof of a drop-in replacement. For XC7Z030 speed-grade and temperature variants, review timing margin, power behavior, temperature requirements, boot configuration, security features, and software support. The XC7Z015 and XC7Z030 compatibility material identifies package-specific differences, such as pins that are not connected on one device and active on the other. Always compare the complete ball map for the exact replacement order code.
Impormasyon ng Pagsunod sa Kautusan
The industrial-temperature suffix does not establish AEC-Q100 qualification. RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not identified in the product records and remain unknown.