AMD

XC7Z030-L2SBG485I - 125K Logic Cell Zynq SoC | AMD

MPN: XC7Z030-L2SBG485I ✓ فعال
1 V Vdss 484-FCBGA (19 x 19 mm) Package 800 MHz Speed
حداقل سفارش: 1 |

XC7Z030-L2SBG485I نمای کلی

AMD XC7Z030-L2SBG485I is a Zynq-7000 Kintex-7 system-on-chip combining a dual-core ARM Cortex-A9 MPCore processor with 125K FPGA logic cells at an 800 MHz processor frequency in an FCBGA package measuring 19 x 19 mm. The device is manufactured using 28 nm technology and is identified with a nominal 1 V supply class in its published product listing.

A Zynq-7000 system-on-chip is a programmable logic device with an integrated hard processor system. It sits within the hierarchy of FPGA and CPLD devices, combines a programmable logic fabric with an ARM processing subsystem, and provides a single-chip platform for hardware acceleration, control logic, networking, and embedded software. This integration can reduce the number of discrete devices required in a system while allowing designers to partition processing-intensive tasks between software and programmable logic.

The XC7Z030 provides 125K logic cells and dual ARM Cortex-A9 MPCore processing with CoreSight support. Its 800 MHz operating frequency supports embedded control and application workloads, while the Kintex-7 logic fabric allows accelerators, interfaces, and real-time data paths to be implemented in hardware. The -2 speed designation identifies its performance grade within the Zynq-7000 ordering scheme, while the I suffix identifies the industrial-temperature product version.

The SoC architecture is significant because the ARM processor and FPGA fabric communicate through a dedicated AXI interconnect rather than through a conventional external processor-to-FPGA bus. Software can control fabric-based hardware blocks, and deterministic logic can handle timing-sensitive functions outside the software execution path. The listed 28 nm process generation and 125K-cell fabric place the XC7Z030 between smaller Zynq devices and larger programmable-logic platforms.

Typical uses include industrial image processing, factory automation, embedded vision, communications infrastructure, programmable logic controllers, and mixed processor-logic systems. A dual-core ARM subsystem can run operating-system-level software and network services, while the FPGA fabric can implement parallel datapaths, protocol handling, sensor acquisition, or hardware-assisted cryptography.

The principal design consideration is board-level integration. The FCBGA package requires a carefully controlled PCB stack-up, power delivery network, decoupling network, and high-density escape routing. Designers should follow the AMD Zynq-7000 package and PCB guidance, including the package pinout files and DS191 device documentation, before assigning power, ground, clock, and high-speed interface pins.

This product record combines the published device identity and architecture with verified package resources, order-code comparison guidance, and practical implementation considerations. It also distinguishes exact package and speed-grade variants so engineers can identify a candidate that can be evaluated for a board-level replacement rather than relying on family-name similarity alone.

جایگزین‌های drop-in برای XC7Z030-L2SBG485I — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

گونه‌ها در این سری

مدل‌های هم‌سری که جایگزین مستقیم هستند برای XC7Z030-L2SBG485I (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در Package, Mounting Type, Processor Core, Device Type, Process Technology.

AMD
Package: 484-FCBGA, 19 mm x 19 mm
Mounting Type: Surface-mount FCBGA
Device Type: Zynq-7000 Kintex-7 system-on-chip
مقایسه با XC7Z030-L2SBG485I →
AMD
Package: 484-FCBGA (19x19 mm)
Processor Core: Dual ARM Cortex-A9 MPCore with CoreSight
Process Technology: 28nm
مقایسه با XC7Z030-L2SBG485I →

XC7Z030-2SBG485I

✅ جایگزین مستقیم
AMD
📦 484-FCBGA (19 x 19 mm)
Zynq-7000 · Dual ARM Cortex-A9 MPCore with CoreSight · 800 MHz · 125,000 · 28nm · 484-FCBGA (19x19 mm) · -40°C to +100°C · 12-bit

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

XC7Z030-1SBG485I

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
📦 484-FCBGA (19 x 19 mm)
مشخصات سازگار

برای قیمت تماس بگیرید

XC7Z030-1SBG485C

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
AMD
📦 484-FCBGA (19 x 19 mm)
Zynq-7000 Kintex-7 system-on-chip · Dual ARM Cortex-A9 MPCore · 667 MHz · 125K logic cells · 130 I/Os · 484-FCBGA, 19 mm x 19 mm · 484 pins · Kintex-7

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

XC7Z030-3SBG485I

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
📦 484-FCBGA (19 x 19 mm)
Same 125K logic cells, dual Cortex-A9 cores, 800 MHz processor rating, industrial suffix, and SBG485 footprint; the -3 speed grade is one performance class above -2 and may change timing and power behavior.

📋 جایگزین مرجع (خارج از کاتالوگ)

XC7Z030-2SBG485C

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
📦 484-FCBGA (19 x 19 mm)
Same 125K logic cells, dual Cortex-A9 cores, 800 MHz processor rating, -2 speed grade, and SBG485 footprint; the C temperature suffix replaces the I industrial suffix.

📋 جایگزین مرجع (خارج از کاتالوگ)

XC7Z030-L2SBG485I حداکثر مقادیر مجاز و مشخصات الکتریکی

Device Type Zynq-7000 Kintex-7 programmable system-on-chip
Processor Core Dual ARM Cortex-A9 MPCore
CoreSight Support Supported
Maximum Processor Frequency 800 MHz
FPGA Logic Cells 125K logic cells
FPGA Family Kintex-7
Programmable Logic Type FPGA
Process Technology 28 nm
Nominal Supply Voltage 1 V
بسته‌بندی 484-FCBGA (19 x 19 mm)
Package Designator SBG485
Temperature Grade Industrial grade
Speed Grade -2
Ordering Suffix I
Architecture All-Programmable SoC
Programmable Logic Kintex-7 FPGA fabric
نوع نصب Surface mount

راهنمای پیکربندی پین XC7Z030-L2SBG485I sbg485

پیکربندی پین برای XC7Z030-L2SBG485I (پکیج sbg485). این IC دیجیتال شامل GPIO، رابط‌های ارتباطی (UART، SPI، I2C) و پین‌های تغذیه است. برای عملکردهای جایگزین پین و گزینه‌های پیکربندی به دیتاشیت سازنده مراجعه کنید. ضروری برای طراحی سیستم‌های نهفته و چیدمان PCB.

نمودار پین‌آوت پکیج sbg485 برای XC7Z030-L2SBG485I

داده پین‌آوت تفصیلی موجود نیست برای XC7Z030-L2SBG485I.

به دیتاشیت برای پیکربندی کامل پین‌ها.

کاربردهای معمول

XC7Z030-L2SBG485I مناسب است برای 6 کاربردs: Industrial Machine Vision, Factory Automation and Control, Industrial Communication Gateway, Embedded Networking Equipment, Programmable Logic Controller, Aerospace and Defense Control System.

🏭

Industrial Machine Vision

The XC7Z030-L2SBG485I fits machine-vision systems that require image acquisition and processing to be divided between programmable logic and an embedded processor. The 125K Kintex-7 logic cells can host parallel pixel pipelines, thresholding, filtering, or interface converters, while the dual ARM Cortex-A9 cores running at up to 800 MHz can manage control software and higher-level decisions. The FCBGA package keeps the heterogeneous processing resources within one 19 x 19 mm device, but the design must allocate separate power budgets for the ARM subsystem and FPGA fabric. A controlled BGA layout, direct decoupling, and adequate thermal spreading are essential for sustained industrial operation.

🏭

Factory Automation and Control

The XC7Z030-L2SBG485I is suitable for factory controllers that must coordinate deterministic I/O with embedded control software. Programmable logic can implement real-time motor timing, encoder capture, safety-adjacent interlocks, or high-speed industrial protocol interfaces, while the dual ARM Cortex-A9 subsystem supports communications, diagnostics, and supervisory control. Integrating both domains in one 125K-cell SoC can simplify the hardware architecture compared with separate processing elements. The -2 speed grade should be checked against FPGA timing margins, and the industrial I suffix should be considered alongside the final enclosure temperature. Power sequencing and independent rail validation remain essential during board bring-up.

🌐

Industrial Communication Gateway

The XC7Z030-L2SBG485I can serve as the processing center of an industrial communication gateway by combining an 800 MHz dual-core ARM subsystem with 125K programmable logic cells. Linux-class software can handle network management and protocol stacks, while the FPGA fabric accelerates packet framing, data filtering, buffering, or custom physical-layer functions. The 19 x 19 mm FCBGA package allows substantial functionality without using multiple large logic devices, although high-speed interfaces require disciplined impedance control and return-path design. Engineers should separate processor and FPGA power budgets, avoid routing sensitive clocks across split planes, and validate timing for every enabled transceiver against the selected -2 speed grade.

🌐

Embedded Networking Equipment

The XC7Z030-L2SBG485I is appropriate for embedded network equipment that divides control-plane software from high-throughput data processing. The dual ARM Cortex-A9 cores can run networking services, configuration logic, and management tasks, while the Kintex-7 fabric can accelerate queues, filtering, compression, or custom packet processing. Its 125K logic cells provide a useful middle ground between small microcontrollers and much larger SoCs. A production design should use the AMD Zynq-7000 memory and pinout guidance, validate signal integrity on each high-speed interface, and model processor and FPGA utilization together so clocking, routing, and thermal margins remain adequate under worst-case traffic.

🔧

Programmable Logic Controller

The XC7Z030-L2SBG485I combines a deterministic FPGA fabric with an ARM processor in a package suited to advanced programmable logic controllers. The 125K logic cells can implement concurrent I/O, timing, motion-control, or safety logic, while the dual-core processor handles HMI data, communications, diagnostics, and configuration. The SoC approach allows a single hardware platform to combine hard real-time behavior with software flexibility. Design work should include formal timing constraints for critical logic, independent brownout monitoring, organized boot and firmware-update paths, and a thermal plan suitable for the industrial-temperature order code. Pin assignments must come from the SBG485 package files rather than a generic Zynq diagram.

✈️

Aerospace and Defense Control System

The XC7Z030-L2SBG485I can be evaluated for aerospace, defense, and rugged embedded systems that need a hard processor subsystem alongside programmable logic. The ARM cores can support supervisory control, diagnostics, and non-real-time processing, while the 125K FPGA fabric can implement deterministic acquisition, signal conditioning, or interface protocols. The industrial-temperature suffix does not by itself establish aerospace qualification, so the exact device, package, radiation, temperature, and screening requirements must be reviewed against the appropriate AMD documentation. Board designers should plan for controlled power rails, careful BGA escape routing, fault monitoring, and thermal analysis under the intended mission profile.

What is AMD XC7Z030-L2SBG485I?
The AMD XC7Z030-L2SBG485I is a Zynq-7000 Kintex-7 programmable system-on-chip with 125K FPGA logic cells and a dual-core ARM Cortex-A9 MPCore processor operating at up to 800 MHz. According to the AMD DS191 Zynq-7000 data sheet, the device combines programmable logic with a hard processor system in a 19 x 19 mm FCBGA package. The -2 suffix identifies the speed grade, while the I suffix identifies the industrial-temperature ordering option.
What are the key specifications of XC7Z030-L2SBG485I that engineers should know?
The XC7Z030-L2SBG485I integrates 125K Kintex-7 logic cells, dual ARM Cortex-A9 MPCore processors, CoreSight support, an 800 MHz maximum processor frequency, and a 1 V nominal supply class. AMD documents the device in the Zynq-7000 DS191 family data sheet. Its 484-FCBGA package measures 19 x 19 mm and uses 28 nm process technology, making the device suitable for compact embedded systems requiring both software execution and programmable hardware.
What is the difference between XC7Z030-L2SBG485I and XC7Z030-2SBG485I?
The XC7Z030-L2SBG485I and XC7Z030-2SBG485I describe the same -2 speed grade and SBG485 package ordering configuration, with the L identifying the low-power-oriented speed option and the other code using the compact 2 notation. Both listings identify 125K logic cells, dual ARM Cortex-A9 processors, an 800 MHz processor frequency, and a 19 x 19 mm FCBGA package. Confirm the exact order code and power characteristics against the manufacturer ordering guide before substitution.
When should I choose XC7Z030-L2SBG485I over another Zynq-7000 device?
Choose the XC7Z030-L2SBG485I when a design requires the XC7Z030 device with 125K logic cells, dual Cortex-A9 processors, the -2 speed grade, an industrial-temperature suffix, and the SBG485 FCBGA footprint. A smaller FPGA may reduce cost and board area, while a larger Zynq device provides more logic capacity but changes power, routing, pinout, and software migration requirements. Confirm power budgets and pin assignments before choosing a different device.
Is XC7Z030-L2SBG485I suitable for industrial automation and embedded vision?
The XC7Z030-L2SBG485I is suitable for industrial automation and embedded vision designs that benefit from both an 800 MHz dual-core ARM processor and 125K programmable logic cells. Software can manage control functions, communications, or operating-system services, while FPGA logic can implement parallel image processing, sensor interfaces, and deterministic hardware pipelines. The I suffix identifies the industrial-temperature ordering version, subject to the final system thermal design.
Where can I download the XC7Z030-L2SBG485I datasheet PDF?
The official AMD DS191 document is available through the AMD documentation link listed on this page and covers the XC7Z030, XC7Z035, XC7Z045, XC7Z100, and related Zynq-7000 SoCs. A separate PDF mirror is also listed in the source records. Use the AMD document for design decisions and the AMD package-pinout resource for assigning BGA balls and selecting PCB escape-routing strategies.
Where can I find the XC7Z030-L2SBG485I pinout?
The XC7Z030-L2SBG485I pin assignments are published in the AMD Zynq-7000 package-device pinout files, which provide ASCII TXT and CSV package information described by UG865. The SBG485 package is 19 x 19 mm and appears in distributor records as a 484-FCBGA. Use the official package files rather than inferring ball assignments from another Zynq package, since power, clock, reference, and multiplexed I/O positions can differ between packages.
What is the best drop-in replacement for XC7Z030-L2SBG485I?
The closest drop-in candidates are the other XC7Z030 SBG485 speed and temperature order codes because they retain the same FPGA device, processor configuration, 125K logic cells, and physical package. Candidates include XC7Z030-2SBG485I, XC7Z030-1SBG485I, XC7Z030-1SBG485C, XC7Z030-3SBG485I, and XC7Z030-2SBG485C. A replacement still requires verification of speed-grade timing, power behavior, temperature requirements, pin-to-pin compatibility, and the programmed design.
Can XC7Z030-1SBG485I replace XC7Z030-L2SBG485I?
The XC7Z030-1SBG485I can be evaluated as a same-package replacement because it retains the XC7Z030 device and SBG485 footprint, but it uses the -1 speed grade rather than -2. The processor frequency remains listed at 800 MHz, while FPGA timing and implementation performance are governed by the speed grade. Confirm the critical-path timing margin, power budget, temperature rating, and lifecycle requirements before approving the substitution.
What can replace XC7Z030-L2SBG485I?
An XC7Z030 variant using the SBG485 package is the most practical replacement family for the XC7Z030-L2SBG485I because it retains the same programmable logic capacity, dual Cortex-A9 architecture, and ball-grid footprint. The correct variant depends on whether the design prioritizes the -2 speed grade, industrial-temperature qualification, or another grade. Cross-package Zynq devices require PCB changes and therefore are not drop-in replacements.
Is there an AMD or Xilinx equivalent for XC7Z030-L2SBG485I?
The AMD Zynq-7000 XC7Z030 family includes several SBG485 order codes that can be evaluated for direct substitution, including the -1, -2, and -3 speed grades and different temperature suffixes. No separate cross-manufacturer equivalent was established for the exact processor, logic, speed-grade, temperature, and package combination. The closest options remain AMD variants, and any final substitution should be checked against the AMD ordering guide and timing constraints.
How do XC7Z030-L2SBG485I and XC7Z030-2SBG485I compare for a new design?
Both devices provide the same XC7Z030 SoC configuration, dual Cortex-A9 processor subsystem, 125K logic cells, 800 MHz processor operation, and SBG485 package, so their core functional resources are closely aligned. The order-code difference is the -L versus compact -2 speed notation, which should be checked against the manufacturer ordering guide for implementation performance and power characteristics. For a new board, select the exact order code required by the design constraints rather than treating the two labels as interchangeable without review.
What design considerations apply to the XC7Z030-L2SBG485I power supply and PCB layout?
The XC7Z030-L2SBG485I requires a dense, carefully partitioned power-delivery network because the processor system and FPGA fabric share a high-performance BGA package. Place decoupling components directly beneath or as close as practical to the relevant power balls, provide separate voltage rails as required by the DS191 power plan, and route high-speed clocks and memory interfaces with controlled impedances. Follow the AMD PCB and package guidance to validate return paths, plane splits, thermal vias, and BGA escape routing.
What is the power and thermal challenge when using XC7Z030-L2SBG485I?
Power and thermal design for the XC7Z030-L2SBG485I depend on processor activity, programmable-logic utilization, clocking, I/O loading, voltage, and ambient temperature; the published listing does not provide a single fixed total-power value. Estimate worst-case activity separately for the ARM subsystem and FPGA fabric, then use the DS191 power budget as the basis for rail sizing. Confirm junction temperature and board thermal performance with the package thermal data and the final PCB stack-up.
Where to buy XC7Z030-L2SBG485I and what is its price?
Use the Request a Quote form on this page to request the current XC7Z030-L2SBG485I price, stock status, and lead time. The part is identified in current product listings as a 19 x 19 mm FCBGA Zynq-7000 SoC with 125K logic cells and an 800 MHz dual-core ARM Cortex-A9 configuration. Quote requests should specify the exact full MPN, required quantity, date code controls, and delivery location so the commercial response is tied to the correct order code.
Is XC7Z030-L2SBG485I in stock and what is the lead time?
Current stock and a production lead time for the exact XC7Z030-L2SBG485I must be confirmed through the Request a Quote form on this page. The verified listings identify the device as an AMD Zynq-7000 SoC in a 484-FCBGA package, but availability can change with demand, allocation, and configuration. Provide the required quantity, target delivery date, and packaging preferences with the request to obtain a current supply commitment.

داده‌های مرجع مهندسی برای XC7Z030-L2SBG485I — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose the XC7Z030-L2SBG485I when the board requires the XC7Z030 Zynq-7000 configuration with 125K logic cells, dual Cortex-A9 processors, the -2 speed class, industrial-temperature ordering, and the SBG485 FCBGA footprint. Select XC7Z030-2SBG485I when the ordering guide confirms that the compact -2 code satisfies the required power and timing behavior. XC7Z030-1SBG485I may work when extra timing margin is unnecessary, while XC7Z030-3SBG485I can provide a higher FPGA speed class. Commercial-suffix SBG485 variants should be selected only when their temperature requirements meet the deployment environment. Every candidate requires complete ball-map, timing, power, thermal, boot, and software validation; other Zynq packages require PCB changes and are not drop-in replacements.

مقایسه با جایگزین‌ها

پارامتر این محصول XC7Z030-2SBG485I XC7Z030-1SBG485I XC7Z030-1SBG485C XC7Z030-3SBG485I XC7Z030-2SBG485C
Package 484-FCBGA (19 x 19 mm), SBG485 484-FCBGA (19 x 19 mm), SBG485 484-FCBGA (19 x 19 mm), SBG485 484-FCBGA (19 x 19 mm), SBG485 484-FCBGA (19 x 19 mm), SBG485 484-FCBGA (19 x 19 mm), SBG485
Brand AMD AMD AMD AMD AMD AMD
Processor Dual ARM Cortex-A9 MPCore Dual ARM Cortex-A9 MPCore Dual ARM Cortex-A9 MPCore Dual ARM Cortex-A9 MPCore Dual ARM Cortex-A9 MPCore Dual ARM Cortex-A9 MPCore
Logic Cells 125K logic cells 125K logic cells 125K logic cells 125K logic cells 125K logic cells 125K logic cells
Maximum Processor Frequency 800 MHz 800 MHz 800 MHz 800 MHz 800 MHz 800 MHz
FPGA Speed Grade -2 -2 -1 -1 -3 -2
Temperature Suffix I industrial grade I industrial grade I industrial grade C commercial grade I industrial grade C commercial grade
Process Technology 28 nm 28 nm 28 nm 28 nm 28 nm 28 nm
CoreSight Supported Supported Supported Supported Supported Supported
Special Order-Code Feature L-prefixed -2 industrial order code Compact -2 industrial order code -1 industrial order code -1 commercial order code -3 industrial order code -2 commercial order code

تفاوت‌های کلیدی

  • Combines a dual-core ARM processor and programmable logic in one device (در مقابلXC7Z030-2SBG485I)
  • Maintains the target processor and logic resources across speed-grade alternatives (در مقابلXC7Z030-1SBG485I)
  • Provides a direct package-match path for industrial systems (در مقابلXC7Z030-2SBG485C)
  • Supports higher FPGA timing class without changing the core architecture (در مقابلXC7Z030-1SBG485I)

یادداشت‌های طراحی

Treat the SBG485 FCBGA as a high-density routing problem. Use the AMD package-device pinout files and package drawing to define every power, ground, reference, clock, and I/O ball before layout. Assign the board stack-up and escape-routing strategy before placing the BGA, then maintain uninterrupted reference planes and continuous return paths beneath high-speed interfaces. Validate layer transitions, via construction, solder-mask design, and assembly constraints with the selected PCB fabricator.

Create separate power budgets for the ARM processing system and Kintex-7 programmable logic because activity levels and design utilization can change current demand independently. Follow the DS191 power-rail requirements for sequencing, voltage selection, decoupling, and monitoring. Place bulk and local decoupling according to the manufacturer layout guidance, keep sensitive reference connections short, and test startup and shutdown at maximum processor activity. Do not select a regulator from average power alone.

Estimate thermal performance at the enclosure level rather than using processor frequency as a proxy for total power. Populate the full FPGA fabric, exercise both ARM cores, enable high-speed I/O, and include the activity expected in the worst mission condition. Use the package thermal model with the actual PCB stack-up, copper area, vias, airflow, and ambient temperature. If the computed junction margin is small, improve spreading or reduce activity through design-level clocking and workload management.

Separate clocks, memory interfaces, programmable logic interfaces, and sensitive references during floorplanning. Keep the ARM memory interfaces on tightly controlled layers with continuous reference planes, and place the Zynq configuration and clocking circuitry where its pins and BGA escape paths remain predictable. Constrain all critical interfaces at the selected speed grade, then verify post-route timing under the full design rather than relying only on block-level synthesis reports.

Do not treat a matching package name as sufficient proof of a drop-in replacement. For XC7Z030 speed-grade and temperature variants, review timing margin, power behavior, temperature requirements, boot configuration, security features, and software support. The XC7Z015 and XC7Z030 compatibility material identifies package-specific differences, such as pins that are not connected on one device and active on the other. Always compare the complete ball map for the exact replacement order code.

اطلاعات انطباق

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

The industrial-temperature suffix does not establish AEC-Q100 qualification. RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not identified in the product records and remain unknown.

تاریخ تأیید داده‌ها: 2026-11-18 — داده‌ها توسط تیم مهندسی قطعات XAIPART تأیید و گردآوری شده است

جستجوهای مرتبط

xc7z030 1sbg485i xc7z030 2sbg485i xc7z030 1sbg485c xc7z030-l2sbg485i datasheet xc7z030-l2sbg485i pdf xc7z030-l2sbg485i pinout xc7z030-l2sbg485i specifications xc7z030-l2sbg485i equivalent xc7z030-l2sbg485i replacement xc7z030-l2sbg485i price amd xc7z030-l2sbg485i xc7z030-l2sbg485i vs xc7z030-2sbg485i xc7z030-l2sbg485i application circuit xc7z030-l2sbg485i fcbga package

قطعات و اصطلاحات مرتبط

AMD AMD Xilinx XC7Z030-L2SBG485I XC7Z030-2SBG485I XC7Z030-1SBG485I XC7Z030-1SBG485C XC7Z030-3SBG485I XC7Z030-2SBG485C Zynq-7000 Kintex-7 FPGA CPLD system-on-chip ARM Cortex-A9 MPCore CoreSight 125K logic cells 800 MHz 28 nm process technology FCBGA-485 484-FCBGA SBG485 industrial temperature grade programmable logic hardware acceleration AXI interconnect
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ