AMD

XCKU060-L1FFVA1156I - Kintex UltraScale FPGA | AMD

MPN: XCKU060-L1FFVA1156I ✓ Nakahanda
0.9 V Vdss 1156-ball FCBGA Package 630 MHz Speed
MOQ: 1 |

XCKU060-L1FFVA1156I Ulas

The AMD XCKU060-L1FFVA1156I is a Kintex UltraScale field-programmable gate array with 580,440 logic cells, 520 configurable I/Os, and a 1156-ball FCBGA package. It uses 20 nm FPGA technology, operates from a nominal 0.9 V supply, and is built for high-performance embedded, signal-processing, communications, and test-equipment designs.

A field-programmable gate array is a semiconductor whose digital logic, interconnect, memory, and I/O behavior are configured after manufacture. Within the product hierarchy, an FPGA is a programmable-logic device, a configurable semiconductor, and a flexible alternative to application-specific integrated circuits. AMD positions Kintex UltraScale devices between lower-cost Artix devices and higher-end Virtex devices for designs requiring substantial parallel processing and high-speed connectivity.

The device provides 725,550 system logic cells according to its product listing, 41,460 configurable logic blocks, and up to 624 inputs and 624 outputs in the associated device family information. Its 20 nm architecture supports a maximum clock-related figure of 630 MHz. A nominal 0.9 V core supply, with documented operating values of 922 mV to 979 mV, places strict power-delivery and decoupling requirements on the supporting board design.

The -L1 ordering code identifies the low-power speed option, while -1FFVA1156I identifies the package and temperature-related ordering configuration. The 1156-ball FCBGA is a large, dense surface-mount package intended for multilayer PCB construction with extensive escape routing, power-plane distribution, and high-speed signal-integrity control. Package interposers and lead-free assembly requirements must follow AMD and board-fabricator process rules.

Typical applications include high-throughput digital filtering, software-radio and communications baseband processing, industrial machine vision, radar and signal-processing subsystems, high-performance test equipment, and accelerator logic. Its 580,440-cell fabric permits parallel pipelines that can process multiple samples or lanes concurrently, while the 520 I/Os support high-volume external connectivity when board-level standards permit.

The main design constraint is PCB implementation rather than firmware alone. A BGA of this density requires controlled layer stackup, via-in-pad or via-above-pad decoupling, defined ball-map escape routing, power and ground planes, and thermal analysis for the FPGA's high aggregate power dissipation. The supply rails should be partitioned and filtered according to the AMD reference design, with local bulk and high-frequency capacitors placed close to their assigned power balls.

This product page combines the exact ordering information, package characteristics, observed source parameters, drop-in same-family options, and practical BGA implementation guidance. It also distinguishes true footprint-compatible alternatives from devices offered in different package configurations, helping engineers make a PCB-safe selection before committing to an FPGA, memory interface, transceiver, or clocking design.

Mga alternatibo na pwedeng ilagay na XCKU060-L1FFVA1156I — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

Variante sa Seri na ito

Katulad na modelo sa serye na katugma sa pagpasok XCKU060-L1FFVA1156I (parehas na form factor at footprint) — pagkakaiba sa Device Type, Logic Cells, Package.

AMD
Device Type: Field-Programmable Gate Array (FPGA)
Logic Cells: 725,550 cells
Package: 1156-FCBGA
Ikabit sa XCKU060-L1FFVA1156I →

XCKU060-1FFVA1156I

✅ Drop-In
AMD
📦 1156-BBGA FCBGA
Kintex UltraScale · Field-Programmable Gate Array (FPGA) · 725,550 cells · 38,912,000 bits · 520 I/O · 630 MHz · 20 nm · 922 mV to 979 mV

Magkontak para sa presyo

Tingnan ang Datasheet →

XCKU060-2FFVA1156I

✅ Drop-In
AMD
📦 1156-BBGA FCBGA
Kintex UltraScale field-programmable gate array (FPGA) · Kintex UltraScale · 725,550 cells · 2,760 CLBs · 520 I/Os · 0.95 V · 20 nm · -2 grade

Magkontak para sa presyo

Tingnan ang Datasheet →

XCKU060-L1FFVA1156I Mga Pinakamataas na Rating at Electrical Characteristics

Device Type Kintex UltraScale FPGA
Logic Cells 580,440 cells
System Logic Cells 725,550 cells
Configurable Logic Blocks 41,460 CLBs
Maximum User I/O 624 inputs and 624 outputs
Configurable I/O 520 I/Os
Process Technology 20 nm
Nominal Core Supply Voltage 0.9 V
Core Voltage Range 922 mV to 979 mV
Maksimum na Taktiko ng Oras 630 MHz
Packhaging 1156-ball FCBGA
Package Type 1156-BBGA
Uri ng Pagpapasok Surface Mount
Industrial Junction Temperature -40 °C to 100 °C
Ordering Grade L1 low-power speed grade
Transceiver Capability Next-generation FPGA transceiver resources
Lead-Free Status Lead-free ordering configuration

Gabay sa Pin Configuration ng XCKU060-L1FFVA1156I 1156-bbga

Pin configuration para sa XCKU060-L1FFVA1156I (1156-bbga package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.

Pinout diagram ng 1156-bbga package para sa XCKU060-L1FFVA1156I

Wala ng detalyadong pinout data na magagamit para sa XCKU060-L1FFVA1156I.

Sumangguni sa datasheet para sa buong pin configuration.

Tipikal na mga Gamit

XCKU060-L1FFVA1156I ay nararapat para sa 6 aplikasyons: Communications Baseband Processing, Industrial Machine Vision, Radar and Signal Processing, High-Performance Test Equipment, Software-Defined Radio, High-Speed Data Acquisition.

🌐

Communications Baseband Processing

XCKU060-L1FFVA1156I fits communications baseband designs requiring parallel filtering, symbol processing, packet scheduling, and control-plane logic. Its 580,440 logic cells and 41,460 configurable logic blocks allow multiple data paths to operate concurrently, while 520 configurable I/Os support substantial board-level parallelism. The 630 MHz maximum clock-related rating provides a useful architectural reference for pipeline design. The L1 ordering option is attractive when the system has a defined power budget, although the final interface rate depends on the selected I/O standards, memory architecture, and timing closure. A production board must provide controlled power delivery around the nominal 0.9 V core rail and preserve signal integrity across the dense 1156-ball FCBGA footprint.

🏭

Industrial Machine Vision

XCKU060-L1FFVA1156I can implement parallel image-processing pipelines, feature extraction, thresholding, frame timing, and accelerator control in industrial vision equipment. The large 580,440-cell fabric supports simultaneous processing of multiple pixels or sensor lanes, and the 520 configurable I/Os can connect camera or network interfaces where board-level standards allow. The L1 grade is relevant to compact systems with constrained cooling because it represents the target's low-power ordering option. Practical implementation still requires careful separation of clocking, high-speed interface, and general I/O power domains. The 1156-ball FCBGA also demands a multilayer PCB with short escape paths, stable reference planes, and adequate thermal spreading beneath the package.

✈️

Radar and Signal Processing

XCKU060-L1FFVA1156I is well suited to radar, sonar, and instrumentation front ends that require parallel sampling, digital downconversion, windowing, filtering, FFT-style processing, and detection control. Its 41,460 configurable logic blocks provide considerable implementation capacity for replicated pipelines, while the 630 MHz clock-related rating supports demanding sequential logic when timing resources are allocated correctly. The device can combine digital processing with externally connected high-speed data converters, subject to the selected I/O capabilities and board signal-integrity budget. Because this is a large BGA FPGA, designers should allocate multiple power rails, verify local decoupling at the assigned balls, and use simulation plus static timing analysis before hardware release.

🔧

High-Performance Test Equipment

XCKU060-L1FFVA1156I can serve as the central sequencer and pattern-processing FPGA in automated test equipment, protocol analyzers, and synthetic instrumentation. The 580,440-cell fabric allows concurrent test engines, timing generation, data capture, and supervisory control to share one programmable device, while 520 configurable I/Os provide extensive connectivity to instruments and fixtures. Its maximum 630 MHz clock-related rating supports high-rate parallel logic, although achievable test rates depend on pin assignments, I/O standards, trace loss, and timing margins. The -L1 ordering option is useful when reducing FPGA power is important in compact test systems. Board planning must preserve supply integrity and provide sufficient thermal conduction through the 1156-ball package.

📡

Software-Defined Radio

XCKU060-L1FFVA1156I supports software-defined radio architectures that require configurable modulation, filtering, digital predistortion, packet handling, and interface bridging. Parallel FPGA resources allow multiple radio channels or processing stages to execute concurrently, while the programmable I/O network connects converters, network processors, and clocking circuits. The 630 MHz maximum clock-related rating and 580,440 logic cells provide room for demanding channel-processing pipelines, subject to resource utilization and timing closure. Designers should use the AMD reference architecture to partition high-speed and general-purpose I/O, and they should treat the nominal 0.9 V core rail as a tightly regulated resource. Dense BGA escape routing and plane continuity are central to achieving repeatable radio performance.

🖥️

High-Speed Data Acquisition

XCKU060-L1FFVA1156I can act as the central FPGA in high-speed acquisition systems, coordinating parallel ADC or DAC channels, buffering, real-time filtering, and host data transfer. Its 580,440 logic cells and 41,460 configurable logic blocks support wide data paths and multiple acquisition pipelines, while 520 configurable I/Os allow board designers to partition the pin budget among converters, clocks, triggers, and communications. The L1 grade is a sensible starting point for power-constrained embedded systems, but actual dissipation depends on transceiver and I/O activity. The 1156-ball FCBGA requires exact land-pattern compliance, short reference-ground paths, low-impedance power distribution, and thermal analysis that accounts for sustained high-speed operation rather than idle activity.

What is XCKU060-L1FFVA1156I?
XCKU060-L1FFVA1156I is an AMD Kintex UltraScale FPGA with 580,440 logic cells, 520 configurable I/Os, and a 1156-ball FCBGA package. The device uses 20 nm technology and a nominal 0.9 V core supply. According to the AMD Kintex UltraScale data sheet, the family combines programmable logic, DSP resources, high-speed connectivity, and integrated memory interfaces for communications, industrial, test, and signal-processing systems.
What are the key specifications of XCKU060-L1FFVA1156I that engineers should know?
The XCKU060-L1FFVA1156I combines 580,440 logic cells, 41,460 configurable logic blocks, 520 configurable I/Os, and a maximum 630 MHz clock-related rating. Its 20 nm Kintex UltraScale architecture uses a nominal 0.9 V core supply with a documented range of 922 mV to 979 mV. The part is packaged in a 1156-ball FCBGA and carries the L1 low-power speed designation.
Where can I download the XCKU060-L1FFVA1156I datasheet PDF?
The XCKU060-L1FFVA1156I data sheet is available through the linked XCKU060-L1FFVA1156I datasheet page, while the related AMD document is indexed as XCKU060-1FFVA1156I. The AMD document is an 81-page Kintex UltraScale data sheet covering DC and AC switching characteristics. Engineers should also consult the exact part ordering guide when confirming package, speed-grade, and temperature options.
Where can I find the XCKU060-L1FFVA1156I pinout and ball map?
The XCKU060-L1FFVA1156I pin assignment is found in the Kintex UltraScale package ball map and pin-description sections of the AMD data sheet. Because the component uses a 1156-ball FCBGA, its footprint is too dense to reproduce reliably as a simplified diagram. Use the AMD BGA package drawing and land pattern directly when creating the PCB footprint, escape routing, and symbol.
Is XCKU060-L1FFVA1156I a drop-in replacement for XCKU060-1FFVA1156I?
XCKU060-1FFVA1156I uses the same XCKU060 device and 1156-ball FCBGA footprint, so it is the closest same-family drop-in option listed for XCKU060-L1FFVA1156I. The principal difference is the speed and power ordering option: L1 is the low-power grade, whereas the standard -1 grade offers a different performance-to-power balance. Confirm timing closure and thermal requirements before substituting them.
What is the best drop-in replacement for XCKU060-L1FFVA1156I?
XCKU060-1FFVA1156I is the best direct same-package candidate because it retains the XCKU060 device, 1156-ball FCBGA package, 520 configurable I/Os, and 20 nm architecture. XCKU060-2FFVA1156I is also footprint-compatible but uses a different speed grade. No verified cross-brand device was found that preserves the 1156-ball pinout, power architecture, and programming compatibility.
XCKU060-L1FFVA1156I vs XCKU060-1FFVA1156I: which is better for low-power designs?
XCKU060-L1FFVA1156I is generally the better choice when the low-power L1 ordering option is a requirement because it is specifically designated for a lower power-versus-performance operating point. XCKU060-1FFVA1156I retains the same 1156-ball FCBGA footprint but uses the standard -1 speed option. The correct choice depends on the design's timing budget, allowable junction temperature, power target, and required operating grade.
What is the difference between XCKU060-L1FFVA1156I and XCKU060-2FFVA1156I?
Both devices are XCKU060 Kintex UltraScale FPGAs in the 1156-ball FCBGA footprint, but their speed-grade ordering options differ. XCKU060-L1FFVA1156I is the L1 low-power grade, while XCKU060-2FFVA1156I is a higher-speed grade. The -2 option may improve timing performance, but it can change power dissipation and thermal requirements; both alternatives use the same package designation.
When should I choose XCKU060-L1FFVA1156I over XCKU060-1FFVA1156I?
Choose XCKU060-L1FFVA1156I when power efficiency or the low-power speed designation is central to the system requirement and the design meets its timing constraints. Choose XCKU060-1FFVA1156I when the standard -1 grade better satisfies clocking or interface timing without requiring the L1 power characteristic. Both retain the same 1156-ball FCBGA, which simplifies PCB reuse.
Is XCKU060-L1FFVA1156I suitable for high-speed signal processing?
XCKU060-L1FFVA1156I is suitable for parallel digital signal processing because it offers 580,440 logic cells, 41,460 configurable logic blocks, and a maximum 630 MHz clock-related rating. It can support filtering, modulation, FFT-style pipelines, channelization, and test-instrumentation logic. Actual interface throughput also depends on selected I/O standards, board-level signal integrity, memory implementation, and timing closure.
How should the power rails for XCKU060-L1FFVA1156I be designed?
Design the XCKU060-L1FFVA1156I power network around the exact rail assignments in the AMD data sheet and reference design. The core operates at a nominal 0.9 V, with a documented range of 922 mV to 979 mV, so rail regulation, transient response, and local decoupling are critical. Place high-frequency capacitors near their assigned BGA balls and use low-impedance power and ground planes to control voltage drop and return-current paths.
What PCB layout practices are important for XCKU060-L1FFVA1156I?
A 1156-ball FCBGA requires a controlled multilayer stackup, exact AMD land pattern, dense via escape routing, and explicit power-plane partitioning. Keep high-speed transceiver and memory-interface traces short, provide matched reference paths where the interface standard requires them, and route clocks with low skew and controlled impedance. The board should also be designed for X-ray inspection and appropriate assembly-process capability.
Is there a cross-brand drop-in replacement for XCKU060-L1FFVA1156I?
No verified cross-brand drop-in replacement was found for XCKU060-L1FFVA1156I. A true replacement would need the same 1156-ball footprint, compatible power rails, equivalent I/O and high-speed transceiver assignments, and compatible configuration behavior. Same-family XCKU060-1FFVA1156I and XCKU060-2FFVA1156I options preserve the package, while devices in 1517-ball or other packages are not drop-in replacements.
How much power and heat does XCKU060-L1FFVA1156I generate?
Power dissipation for XCKU060-L1FFVA1156I depends on the selected I/O standards, clocking, resource utilization, and activity factor, so it must be evaluated for the actual design rather than represented by one fixed figure. Use the AMD power-estimation methodology for the configured bitstream, include adjacent temperature effects, and provide adequate copper area and thermal paths to keep the industrial junction range of -40 °C to 100 °C.
Where to buy XCKU060-L1FFVA1156I and what is its price?
Use the Request a Quote form on this page to request current pricing, stock, minimum order quantity, and lead time for XCKU060-L1FFVA1156I. Commercial terms can change by quantity, package configuration, and regional supply, so a current quotation is more reliable than a static listing value. The package is identified as a 1156-ball FCBGA and is associated with tray presentation in the available component listing.
What is the lead time and stock status for XCKU060-L1FFVA1156I?
Request the current stock position, lead time, and minimum order quantity through the Request a Quote form on this page. The device is a large 1156-ball FCBGA FPGA, and supply planning may depend on the requested quantity and exact ordering code. For an engineering release, confirm the full suffix, package, speed grade, and temperature grade before authorizing procurement.

Impormasyon ng Talumpati sa Engineering for XCKU060-L1FFVA1156I — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose XCKU060-L1FFVA1156I when the design is built around the L1 low-power ordering option and its timing, thermal, and power targets are acceptable. It retains the 580,440-cell XCKU060 architecture and 1156-ball FCBGA footprint. Select XCKU060-1FFVA1156I when the standard -1 grade provides a better timing or performance-to-power balance while preserving the same PCB. Select XCKU060-2FFVA1156I when the higher speed grade is justified and its additional thermal demand remains manageable. Do not choose 1517-ball XCKU060 variants as drop-in parts; their land patterns require a PCB redesign. No cross-brand alternative preserves the 1156-ball electrical, mechanical, and programming compatibility sufficiently to qualify as a drop-in replacement.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto XCKU060-1FFVA1156I XCKU060-2FFVA1156I
Brand AMD AMD AMD
Package 1156-BBGA FCBGA 1156-BBGA FCBGA 1156-BBGA FCBGA
Device Family Kintex UltraScale Kintex UltraScale Kintex UltraScale
Speed or Power Grade L1 low-power grade -1 standard speed grade -2 speed grade
Configurable I/O 520 I/Os 520 I/Os 520 I/Os
Process Technology 20 nm 20 nm 20 nm
Core Supply 0.9 V nominal 0.9 V nominal 0.9 V nominal
Maximum Clock Frequency 630 MHz 630 MHz 630 MHz
Logic Cells 580,440 cells 580,440 cells 580,440 cells
Industrial Junction Range -40 °C to 100 °C -40 °C to 100 °C -40 °C to 100 °C

Pangunahing mga Pagkakaiba

  • L1 low-power ordering option (kumpara saXCKU060-1FFVA1156I)
  • Large-scale programmable logic resource (kumpara saXCKU060-1FFVA1156I)
  • Consistent 1156-ball package migration (kumpara saXCKU060-2FFVA1156I)

Talaan ng Disenyo

Treat the 0.9 V core rail as a high-current, tightly regulated supply. Follow the AMD reference design for rail partitioning and decoupling, place bulk energy storage near the power-entry point, and place high-frequency ceramic capacitors close to the assigned BGA balls. Validate DC droop and transient response at the device pins, including the effect of simultaneous high-speed I/O activity. Never rely only on nominal voltage at the regulator output; the useful acceptance criterion is voltage at the FPGA power balls under worst-case loading.

Create the 1156-ball FCBGA footprint from the official AMD package drawing rather than a generic BGA library. Confirm ball pitch, pad geometry, solder-mask definition, component outline, and courtyard clearance. The escape-routing strategy must preserve the required reference plane beneath every high-speed interface and avoid splits that interrupt return current. Select a stackup capable of the intended I/O rates and include assembly features required by the selected PCB process, such as vias that can be X-ray inspected for voids.

Estimate power for the actual bitstream because FPGA dissipation varies with logic utilization, clocking, I/O standards, and toggle activity. Include static bias, dynamic activity, and board-dependent losses in the thermal model. Provide copper beneath the package where the package design permits it, connect thermal planes through multiple vias, and define a temperature-monitoring strategy. For a sustained high-utilization design, verify that the modeled junction temperature remains below the industrial limit of 100 °C under the highest ambient condition.

Use the AMD reference design as the baseline for transceiver and memory-interface implementation. Preserve continuous reference planes, minimize reference-via transitions, control skew across byte groups or lanes, and apply the connector, package, and PCB losses when budgeting channel performance. Keep unrelated noisy logic away from sensitive clock and transceiver regions, and do not change I/O standards or pin assignments without rerunning timing and signal-integrity simulations.

Do not treat a different XCKU060 package as a drop-in option: the 1156-ball and 1517-ball versions are not PCB-interchangeable even when their logic resources are similar. Also do not assume that -L1, -1, and -2 are interchangeable from a performance standpoint. They share the selected 1156-ball footprint, but speed, power, timing margin, and thermal behavior can differ. Confirm the exact suffix in purchasing documentation and complete tool-based timing and power checks after any substitution.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Walang Lead
Yes
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

The ordering code identifies a lead-free component configuration, but detailed RoHS, REACH, halogen-free, and conflict-minerals declarations were not stated in the available product records.

Data napatotohanan sa: 2026-11-18 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

xcku060 1ffva1517i xcku060 2ffva1156i xcku060 2ffva1517i xcku060 2ffva1156e xcku060 1ffva1517c xcku060 datasheet xcku060 ffva1156 xcku060 2ffva1156i datasheet XCKU060-L1FFVA1156I datasheet XCKU060-L1FFVA1156I pinout XCKU060-L1FFVA1156I equivalent XCKU060-L1FFVA1156I replacement XCKU060-L1FFVA1156I footprint AMD XCKU060-L1FFVA1156I

Mga kaugnay na Mga Komponente at mga Tuntunin

AMD XCKU060-L1FFVA1156I XCKU060-1FFVA1156I XCKU060-2FFVA1156I Kintex UltraScale field-programmable gate array FPGA programmable-logic device configurable semiconductor logic cell configurable logic block L1 low-power speed grade 20 nm process technology 1156-ball FCBGA FCBGA package family surface-mount package 0.9 V core supply 630 MHz clock 520 configurable I/Os communications baseband processing industrial machine vision software-defined radio radar signal processing high-speed data acquisition test equipment
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ