XCKU060-L1FFVA1156I - Kintex UltraScale FPGA | AMD
部品番号: XCKU060-L1FFVA1156I ✓ 生産中XCKU060-L1FFVA1156I 概要
A field-programmable gate array is a semiconductor whose digital logic, interconnect, memory, and I/O behavior are configured after manufacture. Within the product hierarchy, an FPGA is a programmable-logic device, a configurable semiconductor, and a flexible alternative to application-specific integrated circuits. AMD positions Kintex UltraScale devices between lower-cost Artix devices and higher-end Virtex devices for designs requiring substantial parallel processing and high-speed connectivity.
The device provides 725,550 system logic cells according to its product listing, 41,460 configurable logic blocks, and up to 624 inputs and 624 outputs in the associated device family information. Its 20 nm architecture supports a maximum clock-related figure of 630 MHz. A nominal 0.9 V core supply, with documented operating values of 922 mV to 979 mV, places strict power-delivery and decoupling requirements on the supporting board design.
The -L1 ordering code identifies the low-power speed option, while -1FFVA1156I identifies the package and temperature-related ordering configuration. The 1156-ball FCBGA is a large, dense surface-mount package intended for multilayer PCB construction with extensive escape routing, power-plane distribution, and high-speed signal-integrity control. Package interposers and lead-free assembly requirements must follow AMD and board-fabricator process rules.
Typical applications include high-throughput digital filtering, software-radio and communications baseband processing, industrial machine vision, radar and signal-processing subsystems, high-performance test equipment, and accelerator logic. Its 580,440-cell fabric permits parallel pipelines that can process multiple samples or lanes concurrently, while the 520 I/Os support high-volume external connectivity when board-level standards permit.
The main design constraint is PCB implementation rather than firmware alone. A BGA of this density requires controlled layer stackup, via-in-pad or via-above-pad decoupling, defined ball-map escape routing, power and ground planes, and thermal analysis for the FPGA's high aggregate power dissipation. The supply rails should be partitioned and filtered according to the AMD reference design, with local bulk and high-frequency capacitors placed close to their assigned power balls.
This product page combines the exact ordering information, package characteristics, observed source parameters, drop-in same-family options, and practical BGA implementation guidance. It also distinguishes true footprint-compatible alternatives from devices offered in different package configurations, helping engineers make a PCB-safe selection before committing to an FPGA, memory interface, transceiver, or clocking design.
ドロップイン代替品: XCKU060-L1FFVA1156I — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: XCKU060-L1FFVA1156I (同一形状・フットプリント) — 相違点: Device Type, Logic Cells, Package.
XCKU060-1FFVA1156I
✅ ドロップイン価格はお問い合わせください
データシートを見る →XCKU060-2FFVA1156I
✅ ドロップイン価格はお問い合わせください
データシートを見る →XCKU060-L1FFVA1156I 最大定格&電気的特性
| Device Type | Kintex UltraScale FPGA |
| Logic Cells | 580,440 cells |
| System Logic Cells | 725,550 cells |
| Configurable Logic Blocks | 41,460 CLBs |
| Maximum User I/O | 624 inputs and 624 outputs |
| Configurable I/O | 520 I/Os |
| Process Technology | 20 nm |
| Nominal Core Supply Voltage | 0.9 V |
| Core Voltage Range | 922 mV to 979 mV |
| 最大クロック周波数 | 630 MHz |
| パッケージ | 1156-ball FCBGA |
| Package Type | 1156-BBGA |
| 実装タイプ | Surface Mount |
| Industrial Junction Temperature | -40 °C to 100 °C |
| Ordering Grade | L1 low-power speed grade |
| Transceiver Capability | Next-generation FPGA transceiver resources |
| Lead-Free Status | Lead-free ordering configuration |
XCKU060-L1FFVA1156I 1156-bbga ピン配置ガイド
XCKU060-L1FFVA1156I (1156-bbga パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: XCKU060-L1FFVA1156I.
詳細は データシート をご参照ください。
主な用途
XCKU060-L1FFVA1156I の用途: 6 件s: Communications Baseband Processing, Industrial Machine Vision, Radar and Signal Processing, High-Performance Test Equipment, Software-Defined Radio, High-Speed Data Acquisition.
Communications Baseband Processing
XCKU060-L1FFVA1156I fits communications baseband designs requiring parallel filtering, symbol processing, packet scheduling, and control-plane logic. Its 580,440 logic cells and 41,460 configurable logic blocks allow multiple data paths to operate concurrently, while 520 configurable I/Os support substantial board-level parallelism. The 630 MHz maximum clock-related rating provides a useful architectural reference for pipeline design. The L1 ordering option is attractive when the system has a defined power budget, although the final interface rate depends on the selected I/O standards, memory architecture, and timing closure. A production board must provide controlled power delivery around the nominal 0.9 V core rail and preserve signal integrity across the dense 1156-ball FCBGA footprint.
おすすめ
Industrial Machine Vision
XCKU060-L1FFVA1156I can implement parallel image-processing pipelines, feature extraction, thresholding, frame timing, and accelerator control in industrial vision equipment. The large 580,440-cell fabric supports simultaneous processing of multiple pixels or sensor lanes, and the 520 configurable I/Os can connect camera or network interfaces where board-level standards allow. The L1 grade is relevant to compact systems with constrained cooling because it represents the target's low-power ordering option. Practical implementation still requires careful separation of clocking, high-speed interface, and general I/O power domains. The 1156-ball FCBGA also demands a multilayer PCB with short escape paths, stable reference planes, and adequate thermal spreading beneath the package.
おすすめ
Radar and Signal Processing
XCKU060-L1FFVA1156I is well suited to radar, sonar, and instrumentation front ends that require parallel sampling, digital downconversion, windowing, filtering, FFT-style processing, and detection control. Its 41,460 configurable logic blocks provide considerable implementation capacity for replicated pipelines, while the 630 MHz clock-related rating supports demanding sequential logic when timing resources are allocated correctly. The device can combine digital processing with externally connected high-speed data converters, subject to the selected I/O capabilities and board signal-integrity budget. Because this is a large BGA FPGA, designers should allocate multiple power rails, verify local decoupling at the assigned balls, and use simulation plus static timing analysis before hardware release.
おすすめ
High-Performance Test Equipment
XCKU060-L1FFVA1156I can serve as the central sequencer and pattern-processing FPGA in automated test equipment, protocol analyzers, and synthetic instrumentation. The 580,440-cell fabric allows concurrent test engines, timing generation, data capture, and supervisory control to share one programmable device, while 520 configurable I/Os provide extensive connectivity to instruments and fixtures. Its maximum 630 MHz clock-related rating supports high-rate parallel logic, although achievable test rates depend on pin assignments, I/O standards, trace loss, and timing margins. The -L1 ordering option is useful when reducing FPGA power is important in compact test systems. Board planning must preserve supply integrity and provide sufficient thermal conduction through the 1156-ball package.
おすすめ
Software-Defined Radio
XCKU060-L1FFVA1156I supports software-defined radio architectures that require configurable modulation, filtering, digital predistortion, packet handling, and interface bridging. Parallel FPGA resources allow multiple radio channels or processing stages to execute concurrently, while the programmable I/O network connects converters, network processors, and clocking circuits. The 630 MHz maximum clock-related rating and 580,440 logic cells provide room for demanding channel-processing pipelines, subject to resource utilization and timing closure. Designers should use the AMD reference architecture to partition high-speed and general-purpose I/O, and they should treat the nominal 0.9 V core rail as a tightly regulated resource. Dense BGA escape routing and plane continuity are central to achieving repeatable radio performance.
おすすめ
High-Speed Data Acquisition
XCKU060-L1FFVA1156I can act as the central FPGA in high-speed acquisition systems, coordinating parallel ADC or DAC channels, buffering, real-time filtering, and host data transfer. Its 580,440 logic cells and 41,460 configurable logic blocks support wide data paths and multiple acquisition pipelines, while 520 configurable I/Os allow board designers to partition the pin budget among converters, clocks, triggers, and communications. The L1 grade is a sensible starting point for power-constrained embedded systems, but actual dissipation depends on transceiver and I/O activity. The 1156-ball FCBGA requires exact land-pattern compliance, short reference-ground paths, low-impedance power distribution, and thermal analysis that accounts for sustained high-speed operation rather than idle activity.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: XCKU060-L1FFVA1156I — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | XCKU060-1FFVA1156I | XCKU060-2FFVA1156I |
|---|---|---|---|
| Brand | AMD | AMD | AMD |
| Package | 1156-BBGA FCBGA | 1156-BBGA FCBGA | 1156-BBGA FCBGA |
| Device Family | Kintex UltraScale | Kintex UltraScale | Kintex UltraScale |
| Speed or Power Grade | L1 low-power grade | -1 standard speed grade | -2 speed grade |
| Configurable I/O | 520 I/Os | 520 I/Os | 520 I/Os |
| Process Technology | 20 nm | 20 nm | 20 nm |
| Core Supply | 0.9 V nominal | 0.9 V nominal | 0.9 V nominal |
| Maximum Clock Frequency | 630 MHz | 630 MHz | 630 MHz |
| Logic Cells | 580,440 cells | 580,440 cells | 580,440 cells |
| Industrial Junction Range | -40 °C to 100 °C | -40 °C to 100 °C | -40 °C to 100 °C |
主な差別化要因
- L1 low-power ordering option (vs XCKU060-1FFVA1156I)
- Large-scale programmable logic resource (vs XCKU060-1FFVA1156I)
- Consistent 1156-ball package migration (vs XCKU060-2FFVA1156I)
設計ノート
Treat the 0.9 V core rail as a high-current, tightly regulated supply. Follow the AMD reference design for rail partitioning and decoupling, place bulk energy storage near the power-entry point, and place high-frequency ceramic capacitors close to the assigned BGA balls. Validate DC droop and transient response at the device pins, including the effect of simultaneous high-speed I/O activity. Never rely only on nominal voltage at the regulator output; the useful acceptance criterion is voltage at the FPGA power balls under worst-case loading.
Create the 1156-ball FCBGA footprint from the official AMD package drawing rather than a generic BGA library. Confirm ball pitch, pad geometry, solder-mask definition, component outline, and courtyard clearance. The escape-routing strategy must preserve the required reference plane beneath every high-speed interface and avoid splits that interrupt return current. Select a stackup capable of the intended I/O rates and include assembly features required by the selected PCB process, such as vias that can be X-ray inspected for voids.
Estimate power for the actual bitstream because FPGA dissipation varies with logic utilization, clocking, I/O standards, and toggle activity. Include static bias, dynamic activity, and board-dependent losses in the thermal model. Provide copper beneath the package where the package design permits it, connect thermal planes through multiple vias, and define a temperature-monitoring strategy. For a sustained high-utilization design, verify that the modeled junction temperature remains below the industrial limit of 100 °C under the highest ambient condition.
Use the AMD reference design as the baseline for transceiver and memory-interface implementation. Preserve continuous reference planes, minimize reference-via transitions, control skew across byte groups or lanes, and apply the connector, package, and PCB losses when budgeting channel performance. Keep unrelated noisy logic away from sensitive clock and transceiver regions, and do not change I/O standards or pin assignments without rerunning timing and signal-integrity simulations.
Do not treat a different XCKU060 package as a drop-in option: the 1156-ball and 1517-ball versions are not PCB-interchangeable even when their logic resources are similar. Also do not assume that -L1, -1, and -2 are interchangeable from a performance standpoint. They share the selected 1156-ball footprint, but speed, power, timing margin, and thermal behavior can differ. Confirm the exact suffix in purchasing documentation and complete tool-based timing and power checks after any substitution.
コンプライアンス情報
The ordering code identifies a lead-free component configuration, but detailed RoHS, REACH, halogen-free, and conflict-minerals declarations were not stated in the available product records.