XCKU095-1FFVA1156C 520-I/O Kintex UltraScale FPGA | AMD
MPN: XCKU095-1FFVA1156C ✓ NakahandaXCKU095-1FFVA1156C Ulas
An FPGA is a semiconductor device whose digital logic can be configured after manufacture. It belongs to the programmable-logic hierarchy alongside CPLDs and ASICs, but combines field-programmability, parallel processing resources, high-speed serial I/O, and deterministic hardware acceleration in one device. This makes it useful when firmware-based control, adaptable hardware, or high-throughput data paths are more practical than a fixed ASIC.
The Kintex UltraScale architecture provides 1,176,000 logic cells organized into 67,200 configurable logic blocks. Its 2,760 DSP slices support parallel arithmetic, filtering, fixed-point, and floating-point accelerator implementations. The device also offers 520 user I/Os and high-speed GTH and GTY transceiver resources, allowing designers to combine control logic, serial links, memory interfaces, and signal-processing pipelines within one programmable platform.
The XCKU095 device family includes -3, -2, -1, and -1L speed grades, with -3 providing the highest stated performance. The XCKU095-1FFVA1156C uses the -1 grade and an FFVA1156 package. AMD package guidance specifically addresses pin placement for two 72-bit DDR4 memory interfaces, including routing-channel and clock-region considerations that are important for systems requiring high aggregate memory bandwidth.
Typical implementations include high-throughput signal processing, industrial control and automation, networking infrastructure, test and measurement systems, communications equipment, and embedded accelerator platforms. The large logic-cell count supports parallel datapaths, while the DSP-slice population allows computation-heavy blocks to operate concurrently rather than relying entirely on a processor core.
PCB implementation requires careful attention to power delivery, high-speed routing, decoupling, thermal management, and the complex BGA escape-routing process. Use the AMD FFVA1156 package pinout files and UG575 guidance when assigning balls and planning the board stack-up. Validate every power rail, voltage level, decoupling network, transceiver path, and memory interface against the relevant device documentation before fabrication.
This page combines the exact ordering information, verified family characteristics, package-specific engineering guidance, drop-in speed-grade alternatives, and practical design considerations needed to evaluate the XCKU095-1FFVA1156C beyond a basic distributor listing.
Mga alternatibo na pwedeng ilagay na XCKU095-1FFVA1156C — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok XCKU095-1FFVA1156C (parehas na form factor at footprint) — pagkakaiba sa Package Type, Device Type, Speed Grade, Logic Cells, Package.
XCKU095-1FFVA1156I
✅ Drop-In ⚠️ Mga Talaan Hindi NaiwerikmoMagkontak para sa presyo
Tingnan ang Datasheet →XCKU095-2FFVA1156C
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
XCKU095-2FFVA1156I
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →XCKU095-3FFVA1156C
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
XCKU095-3FFVA1156I
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
XCKU095-1FFVA1156C Mga Pinakamataas na Rating at Electrical Characteristics
| Device Type | Kintex UltraScale FPGA |
| Logic Cells | 1,176,000 |
| Configurable Logic Blocks | 67,200 CLBs |
| User I/Os | 520 I/Os |
| DSP Slices | 2,760 slices |
| Speed Grade | -1 |
| Packhaging | 1156-BBGA FCBGA |
| Package Type | FCBGA |
| Terminal Count | 1156 terminals |
| Package Shape | Square |
| Transceiver Resources | GTH and GTY high-speed transceivers |
| DDR4 Interface Support | Package guidance covers two 72-bit DDR4 interfaces |
| Supported Family Speed Grades | -3, -2, -1, and -1L |
| Tindminan RoHS | Compliant |
Gabay sa Pin Configuration ng XCKU095-1FFVA1156C square
Pin configuration para sa XCKU095-1FFVA1156C (square package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.
Wala ng detalyadong pinout data na magagamit para sa XCKU095-1FFVA1156C.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
XCKU095-1FFVA1156C ay nararapat para sa 6 aplikasyons: Industrial Automation and Control, High-Speed Network Infrastructure, DDR4-Connected Data Acquisition, Communications and RF Processing, Test and Measurement Instruments, Embedded Hardware Acceleration.
Industrial Automation and Control
The XCKU095-1FFVA1156C fits industrial control systems that combine deterministic logic, extensive I/O, communications, and real-time signal processing. Its 1,176,000 logic cells can implement multiple control tasks, while 2,760 DSP slices can accelerate filtering, transforms, and motion-control calculations without offloading every operation to a processor. The 520 user I/Os support machine interfaces and peripheral connectivity, and the FFVA1156 package provides the routing capacity needed for dense interconnections. Engineers should separate timing-critical logic into registered pipelines, use the AMD memory-interface guidance for DDR4 systems, and validate industrial temperature requirements against the exact ordering suffix.
Inirekomenda
High-Speed Network Infrastructure
The XCKU095-1FFVA1156C is appropriate for networking equipment requiring parallel packet processing, protocol handling, and high-speed serial connectivity in a single programmable device. The XCKU095 architecture combines 520 user I/Os with GTH and GTY transceiver resources, allowing designers to implement multiple data paths around a common control plane. Its 2,760 DSP slices can support traffic classification, filtering, and signal-processing workloads. Board implementation should preserve controlled impedance, provide clean transceiver reference-clock distribution, and use the official UltraScale package files to assign balls and plan high-speed layer transitions.
Inirekomenda
DDR4-Connected Data Acquisition
The XCKU095-1FFVA1156C suits data-acquisition and test systems that must move samples rapidly between external memory and parallel processing logic. Its 67,200 CLBs and 2,760 DSP slices support acquisition pipelines, digital filtering, decimation, and real-time analysis, while AMD's FFVA1156 guidance specifically addresses placement for two 72-bit DDR4 interfaces. Engineers should use the suggested routing channel and clock-region arrangement to avoid constraining memory-interface routing. Power planning must include the transceiver, memory, logic, and I/O loads under the expected worst-case utilization rather than relying only on an idle-device estimate.
Inirekomenda
Communications and RF Processing
The XCKU095-1FFVA1156C can support communications equipment that combines baseband processing, packet logic, control functions, and high-speed serial links. The large DSP-slice count supports parallel filtering, modulation, demodulation, correlation, and spectral-processing functions, while programmable logic can manage framing and protocol state machines. GTH and GTY resources make the device a candidate for systems requiring high-speed serial connectivity. Designers should define lane assignments from the official pinout files, control reference-clock jitter, provide suitable transceiver power sequencing, and verify signal integrity across the complete stack-up before release.
Inirekomenda
Test and Measurement Instruments
The XCKU095-1FFVA1156C fits modular test and measurement instruments requiring reconfigurable acquisition, modulation, analysis, and interface logic. Its 1,176,000 logic cells allow multiple instrument channels and control paths to coexist, while 2,760 DSP slices support real-time numerical operations. The 520-I/O capability is valuable for external trigger, capture, and peripheral interfaces, and the FFVA1156 package supports dense high-speed connections. For production test equipment, synchronize acquisition and trigger paths carefully, keep sensitive analog sections outside the FPGA, and validate timing margin across all supported clock and temperature conditions.
Inirekomenda
Embedded Hardware Acceleration
The XCKU095-1FFVA1156C is suitable for embedded systems that need hardware acceleration alongside conventional programmable logic. Tasks such as image filtering, fixed-point arithmetic, cryptographic datapaths, and high-volume data transformations can run concurrently across the device's 2,760 DSP slices, reducing pressure on an external processor. The 520 user I/Os support accelerator data exchange, memory access, and peripheral integration. Designers should partition clock domains deliberately, use vendor constraints and timing analysis for every implemented path, and verify accelerator throughput at the intended clock and I/O rates rather than relying only on theoretical DSP-slice counts.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for XCKU095-1FFVA1156C — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | XCKU095-1FFVA1156I | XCKU095-2FFVA1156C | XCKU095-2FFVA1156I | XCKU095-3FFVA1156C | XCKU095-3FFVA1156I |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 1156-BBGA FCBGA | 1156-BBGA FCBGA | 1156-BBGA FCBGA | 1156-BBGA FCBGA | 1156-BBGA FCBGA | 1156-BBGA FCBGA |
| Device Family | Kintex UltraScale | Kintex UltraScale | Kintex UltraScale | Kintex UltraScale | Kintex UltraScale | Kintex UltraScale |
| Speed Grade | -1 | -1 | -2 | -2 | -3 | -3 |
| Temperature Grade Suffix | C | I | C | I | C | I |
| Logic Cells | 1,176,000 | 1,176,000 | 1,176,000 | 1,176,000 | 1,176,000 | 1,176,000 |
| DSP Slices | 2,760 | 2,760 | 2,760 | 2,760 | 2,760 | 2,760 |
| User I/Os | 520 | 520 | 520 | 520 | 520 | 520 |
| Configurable Logic Blocks | 67,200 CLBs | 67,200 CLBs | 67,200 CLBs | 67,200 CLBs | 67,200 CLBs | 67,200 CLBs |
Pangunahing mga Pagkakaiba
- Maintains the complete XCKU095 resource configuration across the compared speed grades (kumpara saXCKU095-3FFVA1156C)
- Offers direct C-to-I temperature-grade sourcing flexibility (kumpara saXCKU095-1FFVA1156I)
- Uses a package explicitly supported by AMD memory-interface placement guidance (kumpara saXCKU095-2FFVA1156I)
Talaan ng Disenyo
Begin PCB layout from the AMD XCKU095 FFVA1156 package documentation and official UltraScale package pinout files. The package guidance demonstrates placement for two 72-bit DDR4 interfaces and emphasizes the routing channel created when adjacent interface banks are offset across clock regions. Reproduce that arrangement when the design uses two interfaces, and verify that BGA escape routing, power distribution, and high-speed topology remain feasible within the selected layer count and stack-up.
Design the supply network around the complete XCKU095 power architecture rather than treating the FPGA as a single load. Separate the core, auxiliary, I/O, and transceiver supplies as required by the device documentation, verify sequencing limits, and provide local high-frequency decoupling at the appropriate package balls. Validate the complete design under maximum clock activity, transceiver utilization, and I/O switching because processor and memory loads can materially change the total current demand.
Establish a thermal budget for the FCBGA before committing to the mechanical enclosure. Estimate junction temperature from total device dissipation, the package thermal model, board copper area, airflow, and the maximum ambient temperature. The 1,176,000 logic cells and 2,760 DSP slices can produce materially different power than an idle configuration, so conduct thermal analysis using the expected worst-case design utilization and verify the board under sustained processing load.
Treat each high-speed interface as an electrical and placement problem as well as a logical connection. Use the official package files to select ball assignments, preserve the documented clock-region and memory-interface relationships, maintain continuous reference planes, and control impedance through the complete stack-up. Transceiver reference clocks and high-speed memory signals require particular attention because return-path discontinuities or package-routing congestion can degrade timing and signal integrity.
Do not treat a family-level XCKU095 listing as an interchangeable substitute without checking the full ordering suffix. The -1, -2, and -3 identifiers denote different speed grades, while C and I denote different commercial temperature options. Also distinguish the FFVA1156 package from other XCKU095 package variants. Confirm device identity, package, speed grade, temperature grade, documented limits, and bitstream compatibility before approving any substitution.
Impormasyon ng Pagsunod sa Kautusan
RoHS compliance is stated for the production-grade XCKU095-1FFVA1156C. No additional compliance claims are made for REACH, automotive qualification, halogen-free status, or conflict-minerals status.