XC7K480T-2FFG901C - 477K-Cell Kintex-7 FPGA | AMD
MPN: XC7K480T-2FFG901C ✓ NakahandaXC7K480T-2FFG901C Ulas
A field-programmable gate array is a semiconductor whose digital logic, memory, and signal-processing resources can be configured after manufacture. The XC7K480T belongs to the Kintex-7 FPGA hierarchy, combining programmable logic blocks, block RAM, DSP48E1 processing resources, programmable I/O, clock-management circuitry, and high-speed serial transceivers. This combination supports parallel processing, data acquisition, protocol bridging, digital filtering, and embedded accelerator functions within one device.
The Kintex-7 architecture provides 37,325 CLBs or logic-cell groups, together with 34,380 Kb of block RAM and 1,920 DSP slices. Its 28 nm fabrication technology and 1 V core voltage support high logic density while keeping board-level power management practical. A 380-I/O package also gives hardware designers access to substantial parallel connectivity for control buses, data capture, external memory interfaces, and general-purpose digital I/O.
The -2 designation identifies the device performance grade within the Kintex-7 family, which is offered in -3, -2, -1, -1L, and -2L grades according to the manufacturer documentation. The FFG901 designation identifies the 901-ball FCBGA package, while the trailing C identifies the commercial-temperature option. The manufacturer documentation also identifies the device as a 901-FCBGA package measuring 31 x 31 mm.
Typical uses include industrial control, test and measurement, communications infrastructure, high-speed data acquisition, video and image processing, and embedded signal-processing systems. The large logic fabric can implement parallel algorithms, the DSP resources can accelerate filtering and fixed-point arithmetic, and the block RAM can support buffering, packet storage, and lookup functions without relying entirely on external memory.
PCB implementation must follow the AMD package pinout and high-speed layout guidance. A 901-ball FCBGA requires dense escape routing, careful power-plane segmentation, and thermal analysis. Differential and high-speed interfaces should use controlled-impedance routing, while power and ground distribution should provide low-impedance paths from supplies to the package balls.
This page combines the device architecture, package and resource data with application guidance, practical design notes, and same-package replacement analysis. It is intended to help engineers evaluate whether the XC7K480T-2FFG901C provides the required Kintex-7 logic, memory, DSP, I/O, speed-grade, and temperature-range capability for a specific FPGA design.
Mga alternatibo na pwedeng ilagay na XC7K480T-2FFG901C — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok XC7K480T-2FFG901C (parehas na form factor at footprint) — pagkakaiba sa Block RAM, Logic Cells, Package, Speed Grade, Core Voltage.
XC7K480T-2FF901C
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
XC7K480T-2FFG901I
✅ Drop-In ⚠️ Mga Talaan Hindi NaiwerikmoMagkontak para sa presyo
Tingnan ang Datasheet →XC7K480T-1FFG901C
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
XC7K480T-3FFG901C
✅ Drop-In ⚠️ Mga Talaan Hindi Naiwerikmo📋 Alternatibo na Reference (hindi sa katalogo)
XC7K480T-1FFG901I
✅ Drop-In ⚠️ Mga Talaan Hindi NaiwerikmoMagkontak para sa presyo
Tingnan ang Datasheet →XC7K480T-2FFG901C Mga Pinakamataas na Rating at Electrical Characteristics
| Device Type | Kintex-7 Field-Programmable Gate Array |
| Logic Cells | 477,760 cells |
| CLBs / Logic-Element Groups | 37,325 CLBs |
| Block RAM | 34,380 Kb |
| Total RAM Bits | 35,205,120 bits |
| DSP Slices | 1,920 slices |
| User I/O | 380 I/O |
| Process Technology | 28 nm |
| Core Voltage | 1 V |
| Speed Grade | -2 |
| Temperature Range | 0 °C to 85 °C |
| Packhaging | 901-FCBGA, 31 x 31 mm |
| Package Pin Count | 901 balls |
| Uri ng Pagpapasok | Surface Mount |
| Packaging | Tray |
Gabay sa Pin Configuration ng XC7K480T-2FFG901C 901 balls
Pin configuration para sa XC7K480T-2FFG901C (901 balls package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.
Wala ng detalyadong pinout data na magagamit para sa XC7K480T-2FFG901C.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
XC7K480T-2FFG901C ay nararapat para sa 6 aplikasyons: Industrial Control and Automation, High-Speed Data Acquisition, Communications and Protocol Bridging, Test and Measurement Equipment, Video and Image Processing, Embedded Signal Processing.
Industrial Control and Automation
The XC7K480T-2FFG901C fits high-end industrial controllers that coordinate motion, sequencing, diagnostics, communications, and safety-adjacent logic in one programmable device. Its 477,760 logic cells provide substantial capacity for parallel control paths, while 380 user I/O support encoder inputs, sensor interfaces, actuators, and field-bus connections. The 35,205,120 block-RAM bits can hold operating data, diagnostics, and communication buffers. For a -2 commercial-grade system, the 0 °C to 85 °C operating range suits controlled indoor equipment. Implementation should use AMD constraints for the 901-FCBGA footprint, validate clock-domain crossings, and verify timing after synthesis against the -2 device target.
Inirekomenda
High-Speed Data Acquisition
XC7K480T-2FFG901C is appropriate for parallel data-acquisition systems that must capture wide buses, buffer bursts, and process samples in real time. Its 380 user I/O provide substantial parallel connectivity, while 35,205,120 RAM bits can accommodate high-depth capture and buffering requirements. The 1,920 DSP slices can perform filtering, correlation, scaling, or fixed-point transformations alongside acquisition control logic. Engineers should establish the target sample rate against the selected I/O standard and clocking scheme, then use post-route timing reports to confirm timing closure. PCB implementation must preserve controlled-impedance routing and provide low-impedance power and ground distribution across the dense 901-FCBGA land pattern.
Inirekomenda
Communications and Protocol Bridging
The XC7K480T-2FFG901C can consolidate multiple communication interfaces, packet-processing paths, and protocol-conversion engines in a single Kintex-7 device. The large programmable logic fabric supports parallel packet parsing, framing, routing, and error checking, while block RAM provides configurable FIFO depths and buffering. The 1,920 DSP slices can accelerate filtering, correlation, and other fixed-point operations associated with signal processing. A practical design should partition clock domains carefully, reserve resources for protocol timing, and verify board-level signal integrity for high-speed interfaces. Pin assignment and bitstream compatibility must be checked against the exact 901-ball package rather than inferred from another FPGA order code.
Inirekomenda
Test and Measurement Equipment
XC7K480T-2FFG901C is well suited to modular test and measurement platforms that combine pattern generation, acquisition, analysis, and instrument control. Its 477,760 logic cells allow concurrent test sequences and interface control, while the 35,205,120 block-RAM bits support deep sample and trace buffers. The 1,920 DSP slices can implement filters, transforms, and calibration routines without offloading every operation to external processors. The -2 speed grade is appropriate for demanding timing paths, and the commercial temperature range covers typical laboratory and factory environments. Designers should use device utilization reporting to reserve headroom and verify that the selected I/O standards, external memory interface, and clocking architecture meet the instrument specification.
Inirekomenda
Video and Image Processing
The XC7K480T-2FFG901C can support parallel image pipelines, sensor aggregation, pixel transformation, and real-time video processing. Its large logic fabric is useful for line buffers, pixel-format conversion, control logic, and multi-stage processing pipelines, while 35,205,120 block-RAM bits can store multiple frame or line buffers. The 1,920 DSP slices allow multiply-accumulate filtering and arithmetic kernels to be implemented in hardware. For a production board, constrain clocks and high-speed interfaces according to the selected I/O standard, reserve memory for frame-rate changes, and perform thermal analysis for sustained processing workloads. The 901-FCBGA footprint also requires careful via-in-pad or escape-routing strategy to preserve signal integrity.
Inirekomenda
Embedded Signal Processing
XC7K480T-2FFG901C supports embedded signal-processing systems that require deterministic parallel throughput and programmable hardware acceleration. The 1,920 DSP slices can execute FIR filters, correlation, modulation, demodulation, or fixed-point transforms, while the large logic fabric manages control flow, buffering, and external interfaces. Block RAM provides dedicated storage for coefficients, sample histories, and intermediate results, reducing pressure on external memory during predictable workloads. Engineering teams should map arithmetic precision and DSP48E1 resource requirements before architecture freeze, then confirm timing with implementation reports for the -2 grade. Power delivery and thermal design must accommodate sustained utilization across a dense 901-FCBGA package without creating excessive voltage-drop or junction-temperature risk.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for XC7K480T-2FFG901C — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | XC7K480T-2FF901C | XC7K480T-2FFG901I | XC7K480T-1FFG901C | XC7K480T-3FFG901C | XC7K480T-1FFG901I |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 901-FCBGA, 31 x 31 mm | 901-FCBGA, 31 x 31 mm | 901-FCBGA, 31 x 31 mm | 901-FCBGA, 31 x 31 mm | 901-FCBGA, 31 x 31 mm | 901-FCBGA, 31 x 31 mm |
| Logic Cells | 477,760 cells | 477,760 cells | 477,760 cells | 477,760 cells | 477,760 cells | 477,760 cells |
| Block RAM | 34,380 Kb | 34,380 Kb | 34,380 Kb | 34,380 Kb | 34,380 Kb | 34,380 Kb |
| DSP Slices | 1,920 slices | 1,920 slices | 1,920 slices | 1,920 slices | 1,920 slices | 1,920 slices |
| User I/O | 380 I/O | 380 I/O | 380 I/O | 380 I/O | 380 I/O | 380 I/O |
| Speed Grade | -2 | -2 | -2 | -1 | -3 | -1 |
| Temperature Grade | Commercial, 0 °C to 85 °C | Commercial, 0 °C to 85 °C | Industrial | Commercial, 0 °C to 85 °C | Commercial, 0 °C to 85 °C | Industrial |
| Process Technology | 28 nm | 28 nm | 28 nm | 28 nm | 28 nm | 28 nm |
Pangunahing mga Pagkakaiba
- High-density Kintex-7 implementation with extensive DSP and memory (kumpara saXC7A100T-1FGG484C)
- Commercial -2 speed grade supports a higher timing target than -1 (kumpara saXC7K480T-1FFG901C)
- Industrial temperature option retains the same package footprint (kumpara saXC7K480T-1FFG901I)
- Documented terminal-compatible ordering form (kumpara saXC7K480T-2FF901C)
Talaan ng Disenyo
Treat the 901-FCBGA footprint as a high-density routing problem rather than a conventional perimeter-lead package. Follow the AMD package pinout and board-design guidance for ball assignment, power and ground connectivity, thermal-via placement, and escape routing. Preserve continuous return paths beneath high-speed nets, use the documented reference escape geometry, and avoid placing sensitive routing across power-plane splits. Validate the completed stack-up with field solver results and maintain adequate spacing between aggressors and clocks, serial links, and sensitive configuration signals.
Create a complete power plan before assigning all 380 user I/O and DSP resources. Decouple each supply domain with the capacitance and placement required by the AMD guidance, provide low-impedance layer transitions from the regulators to the package balls, and account for simultaneous switching current when estimating voltage droop. Confirm whether the selected board uses the conventional Kintex-7 supply arrangement or a power-management configuration. Validate rail sequencing, monitored rails, and startup behavior in hardware because successful bitstream loading does not prove correct power integrity.
Use the package thermal data and the device's actual speed grade and temperature suffix to estimate junction temperature. The -2 grade may consume more power than -1 in timing-critical designs, while sustained use of all 1,920 DSP slices can raise activity-dependent dissipation. Provide thermal vias and copper spreading structures under the package where the footprint permits, avoid enclosing the device in a poorly ventilated enclosure, and monitor junction temperature during worst-case vector activity. Validate thermal assumptions in hardware rather than relying only on nominal FPGA utilization estimates.
Do not assume that an FPGA with the same land pattern is interchangeable merely because its logic resources match. Verify the exact ball map, voltage requirements, configuration pins, MRCC and SRCC pairing, clock-capable pins, memory interfaces, and serial transceiver assignments. Different speed grades can change timing closure and power consumption, while different temperature suffixes change environmental limits. After selecting an alternate order code, recreate the Vivado target, rerun synthesis and implementation, generate fresh bitstream and constraint files, and perform board-level validation.
Impormasyon ng Pagsunod sa Kautusan
The device documentation does not provide explicit RoHS, REACH, lead-free, halogen-free, conflict-minerals, or AEC-Q100 statements. AEC-Q100 is not applicable to this commercial Kintex-7 FPGA ordering option.