Z86E3116VSC - 16MHz 8-Bit Z8 OTP MCU | ZiLOG
MPN: Z86E3116VSC ✗ Tapus ng BuhayZ86E3116VSC Ulas
An 8-bit microcontroller is a complete embedded-processing component that executes firmware from internal program memory and uses digital inputs and outputs to control a product. Within the semiconductor hierarchy, the Z86E3116VSC belongs to the microcontroller class, integrates a CPU core, memory, timers, and I/O circuitry, and serves as the central controller in an embedded system. The Z8 name identifies ZiLOG's 8-bit architecture, while OTP memory permits a device to be programmed during manufacturing rather than repeatedly rewritten in the field.
The principal device characteristics include a 16 MHz operating speed, 2 KB of OTP program memory, 125 bytes of RAM as reported in the component specification listing, and 24 I/O pins. One product listing describes a 4 KB OTP configuration, while the distributor listing identifies the Z86E3116VSC specifically as the 2 KB version. Designers should therefore use the manufacturer pin and memory tables for the exact ordering code and should not infer the target's program-memory capacity from the conflicting 4 KB description.
The Z86E3116VSC is designed for compact control tasks such as appliance control, small industrial modules, instrumentation interfaces, and embedded products with modest processing requirements. Its 24 I/O lines can support digital sensing, actuation, indicators, and communication interfaces when the required peripheral functions and pin multiplexing allow. The 3.5 V to 5.5 V supply range accommodates both lower-voltage and conventional 5 V system rails, although external interface levels and timing must be checked against the device limits.
The 28-pin QCCJ package is a legacy-style square ceramic-chip carrier with J-shaped terminals. Unlike a conventional leaded DIP package, it is intended for surface mounting and offers a compact footprint. Because the exact pin assignments are not published in the retrieved material, the complete pin map should be taken directly from the Zilog datasheet before schematic capture, footprint creation, or PCB routing.
Designers should pay particular attention to OTP programming, supply decoupling, oscillator implementation, and unused-pin handling. OTP memory is suitable for permanent firmware but cannot accept field upgrades, so the programming process must occur during manufacturing. Power rails require local high-frequency bypass capacitance, while oscillator and I/O routing should minimize capacitive loading and switching noise.
This product record combines the exact Z86E3116VSC ordering information with package, memory, voltage, timing, and I/O details, a quantified comparison against the nearest identified substitute family member, and practical guidance for programming and layout. It supports faster engineering triage while directing design-critical decisions to the manufacturer datasheet.
Mga alternatibo na pwedeng ilagay na Z86E3116VSC — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Z86E6116VSC
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
Z86E3116VSC Mga Pinakamataas na Rating at Electrical Characteristics
| Product Type | 8-bit Z8 OTP microcontroller |
| Maksimum na Taktiko ng Oras | 16 MHz |
| Program Memory | 2 KB (2K x 8) OTP |
| RAM | 125 bytes |
| I/O Pin Count | 24 I/O |
| Operating Voltage Range | 3.5 V to 5.5 V |
| Architecture | Z8 8-bit |
| Timer Count | 2 8-bit timers |
| Packhaging | 28-pin QCCJ square ceramic-chip carrier with J-leads |
| Terminal Count | 28 |
| Terminal Form | J-bend |
| Package Shape | Square |
| Temperature Grade | Commercial |
| Uri ng Pagpapasok | Surface mount |
| Programming Memory Type | One-time programmable |
Gabay sa Pin Configuration ng Z86E3116VSC square
Pin configuration para sa Z86E3116VSC (square package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.
Wala ng detalyadong pinout data na magagamit para sa Z86E3116VSC.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
Z86E3116VSC ay nararapat para sa 6 aplikasyons: Appliance Control Module, Industrial Status and Relay Controller, Digital Instrumentation Panel, Battery-Powered Sensing Node, Security and Access Controller, Fixed Function Data Acquisition Unit.
Appliance Control Module
The Z86E3116VSC fits compact appliance-control boards that require permanent control firmware, a 16 MHz clock, and direct digital control of motors, buttons, indicators, or relays. Its 2 KB OTP program area is appropriate for small state machines and fixed sequences, while 24 I/O lines provide useful peripheral reach without adding a larger microcontroller package. The 3.5 V to 5.5 V operating range supports both 3.3 V-oriented and 5 V product architectures. Because program memory is one-time programmable, the firmware should be fully validated before production programming. A small appliance controller also benefits from the device’s simple embedded architecture: timers can support repetitive switching tasks while the CPU handles interlocks and user-panel logic. The QCCJ package requires careful footprint and soldering-process qualification.
Inirekomenda
Industrial Status and Relay Controller
The Z86E3116VSC is suitable for a small industrial status controller when the system needs a limited number of digital inputs, relay-control outputs, and embedded sequencing at 16 MHz. Its 24 I/O lines allow the controller to connect switches, alarm inputs, indicator drivers, and discrete outputs while two 8-bit timers support timing or debouncing functions. The 3.5 V to 5.5 V range simplifies integration with mixed-voltage peripheral boards when appropriate level translation is included. The commercial-grade classification requires verification against the intended ambient temperature and industrial certification requirements. Designers should also include watchdog or supervisory behavior in system architecture, provide local supply bypassing, and confirm that every connected load remains within the applicable pin limits from the manufacturer datasheet.
Inirekomenda
Digital Instrumentation Panel
The Z86E3116VSC can manage a compact digital instrument panel that combines button input, LED indication, alarm handling, and a simple display or communications interface. At 16 MHz, the 8-bit processor provides enough sequential control for menu states and debouncing, while 24 I/O lines reduce the need for external logic. The device’s 2 KB OTP memory is appropriate for firmware that does not require frequent field updates. For panel designs, the key engineering considerations are signal conditioning, display-interface timing, and protection from switching noise. The 3.5 V minimum operating voltage supports direct integration with suitable 3.3 V peripherals, but logic compatibility must be checked for every signal. Production programming should occur only after functional and timing validation because the program memory cannot be rewritten.
Inirekomenda
Battery-Powered Sensing Node
The Z86E3116VSC can serve as the embedded controller in a low-duty-cycle sensing node when the design is dominated by digital sensors and simple threshold logic. Its 3.5 V to 5.5 V operating range accommodates several common low-voltage rails, and its 24 I/O lines are sufficient for digital sensor inputs, wake-control signals, and status indicators. The one-time-programmable architecture favors products whose firmware is fixed at manufacture, reducing concerns about external update mechanisms. Energy efficiency still depends on the complete application: sleep behavior, oscillator choice, pull networks, and peripheral leakage determine battery life. Engineers should consult the manufacturer documentation for timer, oscillator, input, and output characteristics, and should verify that startup and brownout behavior remain compatible with the battery system.
Inirekomenda
Security and Access Controller
The Z86E3116VSC fits a simple access-control module that coordinates keypad inputs, lock-state feedback, alarm outputs, and request-to-exit timing. The 16 MHz Z8 processor supports the sequential logic required by these functions, and two 8-bit timers can help implement timing and debounce behavior. With 24 I/O lines, the controller can connect a compact set of switches, indicators, and relay drivers without requiring extensive external logic. OTP storage prevents casual firmware alteration after manufacture, although it does not by itself provide cryptographic authentication or secure update mechanisms. A security-focused design should add suitable physical and logical protections, validate input timing, and assess fail-safe behavior during power loss. The commercial-grade classification and lifecycle status must be checked before use in access systems with long field lives.
Inirekomenda
Fixed Function Data Acquisition Unit
The Z86E3116VSC is appropriate for a compact, fixed-function data-acquisition unit that gathers discrete sensor states and coordinates a limited set of outputs. The 24 available I/O lines can accommodate digital sensors, threshold flags, capture controls, and status signaling, while the 16 MHz clock supports deterministic sampling control and filtering tasks. The 2 KB OTP program area favors a narrowly defined measurement sequence that is finalized before manufacturing. For analog measurement channels, external converters or analog front ends remain necessary because the listed 24 lines are digital I/O. The design must separate sensitive measurement paths from relay and switching circuitry, follow the manufacturer grounding recommendations, and specify bypass capacitance near the supply pins. Verify acquisition timing and output latency against the production firmware rather than relying only on clock rate.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for Z86E3116VSC — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | Z86E6116VSC |
|---|---|---|
| Brand | ZiLOG | ZiLOG |
| Package | 28-pin QCCJ square ceramic-chip carrier with J-leads | 28-pin QCCJ square ceramic-chip carrier with J-leads |
| Architecture | Z8 8-bit | Z8 8-bit |
| Maximum Clock Frequency | 16 MHz | 16 MHz |
| Program Memory | 2 KB (2K x 8) OTP | 4 KB OTP |
| I/O Count | 24 I/O | 24 I/O |
| Operating Voltage Range | 3.5 V to 5.5 V | 3.5 V to 5.5 V |
| Timer Count | 2 8-bit timers | 2 8-bit timers |
| Programming Memory Type | One-time programmable | One-time programmable |
Pangunahing mga Pagkakaiba
- Smaller 2 KB OTP memory configuration (kumpara saZ86E6116VSC)
- Matches the principal operating specifications of the identified Z8 substitute (kumpara saZ86E6116VSC)
- Commercial-grade positioning (kumpara saZ86E6116VSC)
Talaan ng Disenyo
Treat the Z86E3116VSC program memory as one-time programmable and complete code review, hardware validation, and boundary testing before any production fixture is connected. A device with incorrect OTP contents cannot be corrected by simply rewriting the firmware. Preserve the factory programming file and device-unique traceability, and verify the manufacturer’s programming voltage, clock requirements, and programming sequence on a small prototype batch first.
Create the PCB land pattern from the QCCJ mechanical drawing and pin table rather than from a generic 28-pin square-package drawing. J-lead devices have different lead geometry and soldering requirements from gull-wing or no-lead packages. Confirm courtyard clearance, lead coplanarity, paste or wave-solder suitability, and the component’s orientation marking. Because the exact retrieved pinout is unavailable, do not release artwork until every numbered pin has been cross-checked against the manufacturer datasheet.
Place the required supply-bypass capacitor immediately between the device power and ground pins, and keep the return path short and low-impedance. Route oscillator and sensitive input traces away from relay drivers, inductive loads, and switching nodes. Although the operating range is 3.5 V to 5.5 V, system transients can exceed that range; validate brownout, startup, and load-step behavior with the final power source and external load arrangement.
Use short, direct traces for oscillator, reset, programming, and high-frequency I/O signals. Avoid long parallel routes between the oscillator and sensitive inputs, and provide a quiet ground reference around analog-adjacent digital circuitry. Assign unused pins according to the manufacturer recommendations instead of leaving them floating. If the design uses the Z86E6116VSC candidate, repeat the pin-function review because the larger program-memory size does not guarantee identical peripheral multiplexing.
Impormasyon ng Pagsunod sa Kautusan
The component listing identifies a commercial temperature grade but does not provide RoHS, REACH, lead-free, halogen-free, or conflict-minerals declarations. AEC-Q100 qualification is not stated; because this is an MCU rather than an automotive-qualified ordering code, the field is recorded as not_applicable.