Zilog

Z86E3116VSC - 16MHz 8-Bit Z8 OTP MCU | ZiLOG

부품 번호: Z86E3116VSC ✗ 단종
3.5 V to 5.5 V Vdss 28-pin QCCJ square ceramic-chip carrier with J-leads Package 16 MHz Speed 2 KB (2K x 8) OTP Memory
MOQ: 1 |

Z86E3116VSC 개요

The ZiLOG Z86E3116VSC is an 8-bit Z8-family microcontroller operating at 16 MHz, with 2 KB of one-time-programmable program memory, 24 I/O lines, and operation from 3.5 V to 5.5 V. The device is packaged in a 28-pin square ceramic-chip carrier with J-leads, identified by package code QCCJ. Its combination of OTP memory, moderate I/O capacity, and compact surface-mount package makes it suitable for compact embedded-control products that require deterministic firmware storage and modest digital I/O.

An 8-bit microcontroller is a complete embedded-processing component that executes firmware from internal program memory and uses digital inputs and outputs to control a product. Within the semiconductor hierarchy, the Z86E3116VSC belongs to the microcontroller class, integrates a CPU core, memory, timers, and I/O circuitry, and serves as the central controller in an embedded system. The Z8 name identifies ZiLOG's 8-bit architecture, while OTP memory permits a device to be programmed during manufacturing rather than repeatedly rewritten in the field.

The principal device characteristics include a 16 MHz operating speed, 2 KB of OTP program memory, 125 bytes of RAM as reported in the component specification listing, and 24 I/O pins. One product listing describes a 4 KB OTP configuration, while the distributor listing identifies the Z86E3116VSC specifically as the 2 KB version. Designers should therefore use the manufacturer pin and memory tables for the exact ordering code and should not infer the target's program-memory capacity from the conflicting 4 KB description.

The Z86E3116VSC is designed for compact control tasks such as appliance control, small industrial modules, instrumentation interfaces, and embedded products with modest processing requirements. Its 24 I/O lines can support digital sensing, actuation, indicators, and communication interfaces when the required peripheral functions and pin multiplexing allow. The 3.5 V to 5.5 V supply range accommodates both lower-voltage and conventional 5 V system rails, although external interface levels and timing must be checked against the device limits.

The 28-pin QCCJ package is a legacy-style square ceramic-chip carrier with J-shaped terminals. Unlike a conventional leaded DIP package, it is intended for surface mounting and offers a compact footprint. Because the exact pin assignments are not published in the retrieved material, the complete pin map should be taken directly from the Zilog datasheet before schematic capture, footprint creation, or PCB routing.

Designers should pay particular attention to OTP programming, supply decoupling, oscillator implementation, and unused-pin handling. OTP memory is suitable for permanent firmware but cannot accept field upgrades, so the programming process must occur during manufacturing. Power rails require local high-frequency bypass capacitance, while oscillator and I/O routing should minimize capacitive loading and switching noise.

This product record combines the exact Z86E3116VSC ordering information with package, memory, voltage, timing, and I/O details, a quantified comparison against the nearest identified substitute family member, and practical guidance for programming and layout. It supports faster engineering triage while directing design-critical decisions to the manufacturer datasheet.

드롭인 대체품: Z86E3116VSC — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.

Z86E6116VSC

✅ 드롭인
📦 28-pin QCCJ square ceramic-chip carrier with J-leads
OTP program memory increases from 2 KB to 4 KB, a 100% increase, while clock speed remains 16 MHz and I/O remains 24 lines

📋 참조 대체품 (카탈로그에 없음)

Z86E3116VSC 최대 정격 & 전기적 특성

Product Type 8-bit Z8 OTP microcontroller
최대 클록 주파수 16 MHz
Program Memory 2 KB (2K x 8) OTP
RAM 125 bytes
I/O Pin Count 24 I/O
Operating Voltage Range 3.5 V to 5.5 V
Architecture Z8 8-bit
Timer Count 2 8-bit timers
패키지 28-pin QCCJ square ceramic-chip carrier with J-leads
Terminal Count 28
Terminal Form J-bend
Package Shape Square
Temperature Grade Commercial
실장 유형 Surface mount
Programming Memory Type One-time programmable

Z86E3116VSC square 핀 구성 가이드

Z86E3116VSC(square 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.

Z86E3116VSC의 square 패키지 핀아웃 다이어그램

다음에 대한 상세 핀아웃 데이터 없음: Z86E3116VSC.

다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.

일반적인 애플리케이션

Z86E3116VSC 적합 용도: 6 애플리케이션s: Appliance Control Module, Industrial Status and Relay Controller, Digital Instrumentation Panel, Battery-Powered Sensing Node, Security and Access Controller, Fixed Function Data Acquisition Unit.

🔧

Appliance Control Module

The Z86E3116VSC fits compact appliance-control boards that require permanent control firmware, a 16 MHz clock, and direct digital control of motors, buttons, indicators, or relays. Its 2 KB OTP program area is appropriate for small state machines and fixed sequences, while 24 I/O lines provide useful peripheral reach without adding a larger microcontroller package. The 3.5 V to 5.5 V operating range supports both 3.3 V-oriented and 5 V product architectures. Because program memory is one-time programmable, the firmware should be fully validated before production programming. A small appliance controller also benefits from the device’s simple embedded architecture: timers can support repetitive switching tasks while the CPU handles interlocks and user-panel logic. The QCCJ package requires careful footprint and soldering-process qualification.

🏭

Industrial Status and Relay Controller

The Z86E3116VSC is suitable for a small industrial status controller when the system needs a limited number of digital inputs, relay-control outputs, and embedded sequencing at 16 MHz. Its 24 I/O lines allow the controller to connect switches, alarm inputs, indicator drivers, and discrete outputs while two 8-bit timers support timing or debouncing functions. The 3.5 V to 5.5 V range simplifies integration with mixed-voltage peripheral boards when appropriate level translation is included. The commercial-grade classification requires verification against the intended ambient temperature and industrial certification requirements. Designers should also include watchdog or supervisory behavior in system architecture, provide local supply bypassing, and confirm that every connected load remains within the applicable pin limits from the manufacturer datasheet.

📺

Digital Instrumentation Panel

The Z86E3116VSC can manage a compact digital instrument panel that combines button input, LED indication, alarm handling, and a simple display or communications interface. At 16 MHz, the 8-bit processor provides enough sequential control for menu states and debouncing, while 24 I/O lines reduce the need for external logic. The device’s 2 KB OTP memory is appropriate for firmware that does not require frequent field updates. For panel designs, the key engineering considerations are signal conditioning, display-interface timing, and protection from switching noise. The 3.5 V minimum operating voltage supports direct integration with suitable 3.3 V peripherals, but logic compatibility must be checked for every signal. Production programming should occur only after functional and timing validation because the program memory cannot be rewritten.

🧩

Battery-Powered Sensing Node

The Z86E3116VSC can serve as the embedded controller in a low-duty-cycle sensing node when the design is dominated by digital sensors and simple threshold logic. Its 3.5 V to 5.5 V operating range accommodates several common low-voltage rails, and its 24 I/O lines are sufficient for digital sensor inputs, wake-control signals, and status indicators. The one-time-programmable architecture favors products whose firmware is fixed at manufacture, reducing concerns about external update mechanisms. Energy efficiency still depends on the complete application: sleep behavior, oscillator choice, pull networks, and peripheral leakage determine battery life. Engineers should consult the manufacturer documentation for timer, oscillator, input, and output characteristics, and should verify that startup and brownout behavior remain compatible with the battery system.

🔒

Security and Access Controller

The Z86E3116VSC fits a simple access-control module that coordinates keypad inputs, lock-state feedback, alarm outputs, and request-to-exit timing. The 16 MHz Z8 processor supports the sequential logic required by these functions, and two 8-bit timers can help implement timing and debounce behavior. With 24 I/O lines, the controller can connect a compact set of switches, indicators, and relay drivers without requiring extensive external logic. OTP storage prevents casual firmware alteration after manufacture, although it does not by itself provide cryptographic authentication or secure update mechanisms. A security-focused design should add suitable physical and logical protections, validate input timing, and assess fail-safe behavior during power loss. The commercial-grade classification and lifecycle status must be checked before use in access systems with long field lives.

📡

Fixed Function Data Acquisition Unit

The Z86E3116VSC is appropriate for a compact, fixed-function data-acquisition unit that gathers discrete sensor states and coordinates a limited set of outputs. The 24 available I/O lines can accommodate digital sensors, threshold flags, capture controls, and status signaling, while the 16 MHz clock supports deterministic sampling control and filtering tasks. The 2 KB OTP program area favors a narrowly defined measurement sequence that is finalized before manufacturing. For analog measurement channels, external converters or analog front ends remain necessary because the listed 24 lines are digital I/O. The design must separate sensitive measurement paths from relay and switching circuitry, follow the manufacturer grounding recommendations, and specify bypass capacitance near the supply pins. Verify acquisition timing and output latency against the production firmware rather than relying only on clock rate.

What is the Z86E3116VSC microcontroller?
The Z86E3116VSC is a ZiLOG Z8-family, 8-bit OTP microcontroller rated for 16 MHz operation in a 28-pin QCCJ package. According to the Mouser component listing, the exact ordering code provides 2 KB of one-time-programmable program memory and 24 I/O lines. The device is positioned for compact embedded-control designs requiring modest processing capacity and permanent firmware storage.
What are the key specifications of Z86E3116VSC that engineers should know?
The Z86E3116VSC combines a 16 MHz maximum operating frequency, 2 KB of OTP program memory, 125 bytes of RAM, and 24 I/O lines in a 28-pin QCCJ surface-mount package. Its listed operating-voltage range is 3.5 V to 5.5 V. The distributor and specification listings describe an 8-bit Z8 architecture with two 8-bit timers, making it suitable for compact control, measurement, and appliance applications.
Where can I download the Z86E3116VSC datasheet PDF?
The Z86E3116VSC datasheet is accessible through the Octopart datasheet page for this exact ordering code. The Zilog manufacturer datasheet is the controlling document for the pin assignment, electrical characteristics, OTP programming procedure, clocking, and package dimensions. Use the manufacturer document rather than a generic cross-reference result when creating the PCB footprint or programming production fixtures.
Where is the Z86E3116VSC pinout?
The authoritative Z86E3116VSC pinout is in the pin-description table of the Zilog manufacturer datasheet for the 28-pin QCCJ package. The package listing identifies 28 J-lead terminals, but the retrieved material does not provide a complete numbered pin table. Use the datasheet pin table to assign power, ground, oscillator, I/O, and programming signals in the schematic and PCB layout.
How much program memory and RAM does Z86E3116VSC have?
The Z86E3116VSC is listed with 2 KB of one-time-programmable program memory and 125 bytes of RAM. A separate component listing describes a 4 KB OTP configuration without proving that capacity applies to this ordering code. For design work, use the 2 KB figure associated with Z86E3116VSC and confirm the memory map and addressing limits against the manufacturer datasheet.
What is the Z86E3116VSC operating voltage range?
The Z86E3116VSC operates across a 3.5 V to 5.5 V supply range according to the Zilog component specification listing. This permits use in lower-voltage systems as well as conventional 5 V equipment. Confirm operating conditions, input thresholds, and output-current limits for every connected peripheral using the electrical-characteristics table in the manufacturer datasheet.
Can Z86E3116VSC be used in industrial control applications?
Yes, the Z86E3116VSC can serve as the controller in a small industrial module when its 16 MHz processing rate, 24 I/O lines, and 3.5 V to 5.5 V supply range satisfy the system requirements. The device is listed as commercial grade, so its temperature limits, ESD performance, isolation requirements, and long-term availability must be checked before deployment in harsh or safety-related equipment.
What can replace Z86E3116VSC?
Z86E6116VSC is the closest identified Zilog substitute because it belongs to the same Z8 OTP microcontroller family and is available in the same 28-lead package family. Its program memory is 4 KB rather than the target's 2 KB, while operating speed and I/O count remain comparable. The candidate requires pin-level and peripheral-equivalence review before it can be treated as a drop-in replacement.
Is Z86E6116VSC pin-compatible with Z86E3116VSC?
Z86E6116VSC is a candidate for PCB reuse because it is a Z8-family OTP MCU in a comparable 28-pin package and offers 4 KB of program memory instead of 2 KB. The retrieved cross-reference material does not publish a complete pin-equivalence matrix, so it should be treated as a qualified candidate rather than an unconditional substitution. Compare power pins, oscillator pins, I/O functions, interrupts, and programming signals before release.
Z86E3116VSC vs Z86E6116VSC — which is better for firmware expansion?
The Z86E6116VSC is the better choice when firmware size is the deciding constraint because it provides 4 KB of OTP program memory compared with 2 KB on the Z86E3116VSC. Both are identified as 16 MHz, 8-bit Z8-class devices with 24 I/O lines. Z86E6116VSC is preferable for larger code images, while Z86E3116VSC may suffice for smaller control routines.
When should I choose Z86E3116VSC over a larger 8-bit MCU?
Choose Z86E3116VSC when a design needs only modest code storage, up to 24 digital I/O lines, and a compact controller operating at 16 MHz. It is a reasonable choice for simple appliance controls, status panels, and small peripheral-control modules. Select a larger MCU when the application requires more memory, more peripherals, newer communication interfaces, wider temperature qualification, or a longer active lifecycle.
Is Z86E3116VSC suitable for OTP production programming?
Yes, Z86E3116VSC is specifically identified as a one-time-programmable microcontroller and is suitable for manufacturing processes that program each device once before field use. OTP provides permanent firmware storage but does not support subsequent firmware replacement. Production fixtures, programming voltage, timing, and blank-device handling must follow the Zilog programming instructions exactly.
Where to buy Z86E3116VSC online?
Use the Request a Quote form on this page to request Z86E3116VSC availability, minimum order quantity, and delivery terms. The part is an exact-match Zilog ordering code with a 28-pin QCCJ package and 2 KB OTP configuration. Quote requests are preferable for confirming current lifecycle status and exact package or packing-code availability before committing a production build.
What is the price of Z86E3116VSC?
The current commercial price for Z86E3116VSC is not stated in the retrieved listings, so use the Request a Quote form on this page for the current unit price and quantity breaks. When requesting a quote, identify the exact Z86E3116VSC ordering code, required quantity, date code, and acceptable packing method. This avoids confusion with related Z8 microcontrollers or related 28-pin devices.
What is the lead time and stock status for Z86E3116VSC?
Current stock and lead time should be confirmed through the Request a Quote form on this page rather than inferred from an archived product listing. Request the Z86E3116VSC quantity, target date, and acceptable date-code window. Lifecycle status is not conclusively stated in the retrieved material, so a supply commitment should be obtained before treating the device as suitable for a long-running production program.

엔지니어링 참조 데이터: Z86E3116VSC — 비교, 설계 지침 및 규정 준수 정보.

선택 가이드

Choose Z86E3116VSC when a compact embedded product needs an 8-bit controller running at 16 MHz with 24 I/O lines, a 3.5 V to 5.5 V supply range, and no more than 2 KB of permanently programmed firmware. It is particularly suitable for appliance logic, fixed sequence control, simple status panels, and digital I/O modules. Choose Z86E6116VSC instead when the same general Z8 and 28-pin platform is needed but the firmware requires up to 4 KB of OTP memory; confirm every pin function and peripheral mapping before treating it as a drop-in substitute. For designs requiring modern communications, larger RAM, extensive peripherals, field-updatable nonvolatile memory, or broader lifecycle assurance, move to a current general-purpose MCU rather than constraining the design to this legacy OTP device. OTP programming also means the complete firmware must be validated before production quantities are programmed.

대체품과의 비교

파라미터 이 제품 Z86E6116VSC
Brand ZiLOG ZiLOG
Package 28-pin QCCJ square ceramic-chip carrier with J-leads 28-pin QCCJ square ceramic-chip carrier with J-leads
Architecture Z8 8-bit Z8 8-bit
Maximum Clock Frequency 16 MHz 16 MHz
Program Memory 2 KB (2K x 8) OTP 4 KB OTP
I/O Count 24 I/O 24 I/O
Operating Voltage Range 3.5 V to 5.5 V 3.5 V to 5.5 V
Timer Count 2 8-bit timers 2 8-bit timers
Programming Memory Type One-time programmable One-time programmable

주요 차별점

  • Smaller 2 KB OTP memory configuration (vs Z86E6116VSC)
  • Matches the principal operating specifications of the identified Z8 substitute (vs Z86E6116VSC)
  • Commercial-grade positioning (vs Z86E6116VSC)

설계 노트

Treat the Z86E3116VSC program memory as one-time programmable and complete code review, hardware validation, and boundary testing before any production fixture is connected. A device with incorrect OTP contents cannot be corrected by simply rewriting the firmware. Preserve the factory programming file and device-unique traceability, and verify the manufacturer’s programming voltage, clock requirements, and programming sequence on a small prototype batch first.

Create the PCB land pattern from the QCCJ mechanical drawing and pin table rather than from a generic 28-pin square-package drawing. J-lead devices have different lead geometry and soldering requirements from gull-wing or no-lead packages. Confirm courtyard clearance, lead coplanarity, paste or wave-solder suitability, and the component’s orientation marking. Because the exact retrieved pinout is unavailable, do not release artwork until every numbered pin has been cross-checked against the manufacturer datasheet.

Place the required supply-bypass capacitor immediately between the device power and ground pins, and keep the return path short and low-impedance. Route oscillator and sensitive input traces away from relay drivers, inductive loads, and switching nodes. Although the operating range is 3.5 V to 5.5 V, system transients can exceed that range; validate brownout, startup, and load-step behavior with the final power source and external load arrangement.

Use short, direct traces for oscillator, reset, programming, and high-frequency I/O signals. Avoid long parallel routes between the oscillator and sensitive inputs, and provide a quiet ground reference around analog-adjacent digital circuitry. Assign unused pins according to the manufacturer recommendations instead of leaving them floating. If the design uses the Z86E6116VSC candidate, repeat the pin-function review because the larger program-memory size does not guarantee identical peripheral multiplexing.

규정 준수 정보

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
무연
Unknown
무할로겐
Unknown
분쟁 광물
Unknown

The component listing identifies a commercial temperature grade but does not provide RoHS, REACH, lead-free, halogen-free, or conflict-minerals declarations. AEC-Q100 qualification is not stated; because this is an MCU rather than an automotive-qualified ordering code, the field is recorded as not_applicable.

관련 검색

Z86E3116VSC datasheet Z86E3116VSC pinout Z86E3116VSC datasheet pdf Z86E3116VSC replacement Z86E3116VSC equivalent Z86E3116VSC cross reference Z86E3116VSC vs Z86E6116VSC ZiLOG Z86E3116VSC Z86E3116VSC QCCJ footprint Z86E3116VSC price Z86E3116VSC stock Z86E3116VSC 16MHz microcontroller

관련 부품 & 용어

ZiLOG Z86E3116VSC Z86E6116VSC Z8 architecture 8-bit microcontroller Z8 microcontroller one-time programmable memory OTP 2 KB program memory 125 bytes RAM 16 MHz clock 24 I/O lines 3.5 V to 5.5 V QCCJ package 28-pin ceramic-chip carrier J-lead surface-mount package embedded control appliance control industrial controller digital instrumentation battery-powered sensing access control data acquisition timer semiconductor
빠른 견적 RFQ
상세 정보를 모두 입력하십시오 — 영업팀이 24시간 이내에 답변드립니다
부품 번호 제조사 패키지 QTY 목표 가격 합계
✓
견적이 제출되었습니다!

24시간 이내에 이메일로 답변드리겠습니다

1
RFQ 제출됨
2
견적 접수됨
3
주문 완료
4
결제
5
배송됨
6
배송 완료
RFQ 상세 보기