Ürünler (44.000+)

TLV2761ID - 500kHz RRIO Micro-Power Op Amp | Texas Instruments
TLV2761ID

TLV2761ID - 500kHz RRIO Micro-Power Op Amp | Texas Instruments

The Texas Instruments TLV2761ID is a single-circuit, rail-to-rail input/output operational amplifier designed for low-voltage, low-power signal conditioning. It operates from a 1.8 V supply, supports supply voltages up to the recommended 3.6 V maximum, and provides a 500 kHz gain-bandwidth product while drawing only 20 µA of operating current. The device is offered in an 8-pin SOIC package for the industrial temperature range from -40°C to +85°C. An operational amplifier is an analog integrated circuit that amplifies the voltage difference between its differential inputs while using feedback to set the closed-loop gain. The TLV2761 belongs to the rail-to-rail-input/output, or RRIO, family of voltage-feedback amplifiers. Rail-to-rail input operation improves dynamic range in low-voltage systems because the input common-mode range can extend toward both supply rails, while rail-to-rail output operation provides useful output swing near the available supply limits. The TLV2761ID combines 500 kHz bandwidth with approximately 20 µA operating current, making it suitable for portable and low-energy systems where converter size, signal bandwidth, and current consumption are all important. Its single-supply architecture supports operation from 1.8 V, a useful voltage range for coin cells, two alkaline cells, and low-voltage sensor systems. The single amplifier configuration also avoids unnecessary circuit area when only one gain stage is required. The TLV2761 family provides rail-to-rail input and output capability in a compact low-power implementation. Its 500 kHz bandwidth is sufficient for low- and moderate-frequency precision signal paths, including sensor interfaces, current measurements, and buffered analog signals. The 20 µA operating current supports energy-efficient acquisition systems, although a design requiring high closed-loop gain must confirm that the resulting settling behavior and noise meet its bandwidth requirements. Because the maximum recommended supply voltage is 3.6 V, the TLV2761ID should not be treated as a conventional 5 V or higher-voltage amplifier. Designators commonly use single, positive supply operation for battery-powered instrumentation. The device is available in an 8-pin SOIC package, simplifying assembly on both prototype boards and production PCBs using standard surface-mount processes. When connecting external circuitry, keep feedback resistors close to the amplifier pins and route input and output traces away from switching nodes and high-current paths. Decoupling capacitors should connect to a low-impedance ground plane with short traces. Because RRIO amplifiers can operate close to their supply rails, input and output signals must remain within the device's absolute maximum and operating limits, including during power-up and shutdown transitions. This page combines the Texas Instruments product specifications with practical selection, replacement, layout, and sourcing guidance. It also identifies the distinction between electrically similar TLV2761 ordering codes and explains why package, temperature grade, and shutdown capability must be checked before treating any replacement as a true drop-in choice.

RFQ İletişim
TLV2761IP - 500kHz Micropower RRIO Op Amp | Texas Instruments
TLV2761IP

TLV2761IP - 500kHz Micropower RRIO Op Amp | Texas Instruments

The Texas Instruments TLV2761IP is a single 3.6 V, 500 kHz, rail-to-rail input and output operational amplifier in an 8-pin PDIP package. It combines a low 20 µA supply current with rail-to-rail signal handling and is intended for portable, low-power, and general-purpose analog signal-conditioning systems. The device is identified as the I-grade, PDIP-package member of the TLV2761 family. An operational amplifier, or op amp, is a high-gain analog building block used to amplify, buffer, compare, and filter signals. The TLV2761 belongs to the operational amplifier hierarchy, where its rail-to-rail input and output stages allow signals close to the positive and negative supply rails to be processed more effectively than with a conventional input stage. This makes it useful in sensor interfaces, low-voltage signal chains, and portable instrumentation. The TLV2761IP operates from a single supply of up to 3.6 V and provides 500 kHz gain-bandwidth performance. Its typical supply current is 20 µA, supporting battery-powered and energy-conscious designs. Rail-to-rail input and output operation extends usable signal range within the supply limits, while the general-purpose amplifier configuration provides a practical solution for low-frequency amplification, buffering, and thresholding functions. The 8-pin PDIP format supports through-hole construction and is useful for prototypes, educational platforms, manually wired test equipment, and designs that benefit from socketed or easily inspected assemblies. Unlike a surface-mount package, the PDIP outline provides generous spacing between leads, making it easier to access with conventional bench instruments. Care is still required to maintain clean supply grounding and stable feedback networks when the amplifier is installed on a prototyping board. Typical uses include low-voltage sensor interfaces, current or voltage sensing, portable measurement systems, threshold comparators, audio-level conditioning, and general analog signal buffering. In a battery-powered design, its 20 µA typical supply current is the principal power-budget benefit, although actual system consumption also depends on the operating mode, load, and external network. The 500 kHz bandwidth supports moderate-frequency closed-loop operation rather than high-speed signal processing. Designers should confirm the minimum and maximum supply voltage, input common-mode limits, output swing, shutdown behavior, and stability requirements from the manufacturer datasheet before finalizing the circuit. Decoupling capacitors should be placed close to the supply pins, and feedback components should be selected with the amplifier's recommended operating region in mind. The PDIP package also requires adequate clearance from nearby conductive parts during soldering and inspection. This page consolidates the manufacturer product identity, verified package and performance information, pin-document location, purchasing workflow, and engineering considerations into a focused guide. It is designed to help engineers confirm fit, assess application suitability, and plan a replacement review without reducing the TLV2761IP to a distributor listing summary.

RFQ İletişim
TLV2762CD - 3.6V 500kHz Dual RRIO Op Amp | Texas Instruments
TLV2762CD

TLV2762CD - 3.6V 500kHz Dual RRIO Op Amp | Texas Instruments

Texas Instruments TLV2762CD is a dual, micropower, rail-to-rail input/output operational amplifier designed for low-voltage signal conditioning. It operates from a single 1.8 V to 3.6 V supply, provides 500 kHz unity-gain bandwidth, and is packaged in an 8-pin SOIC. Each channel combines rail-to-rail inputs and outputs with 95 nV/√Hz input-voltage noise, making it suitable for battery-powered instrumentation, sensor interfaces, and precision analog signal paths. An operational amplifier is an active analog circuit that amplifies the voltage difference between two inputs while using negative feedback to control gain and bandwidth. A rail-to-rail input stage accepts signals close to the supply rails, while a rail-to-rail output stage can produce output voltages near either rail. This capability improves dynamic range in systems whose signal range approaches the available supply voltage. The TLV2762 belongs to the operational-amplifier hierarchy, specifically the low-voltage, low-power, rail-to-rail amplifier class. The two independent amplifier channels can perform filtering, buffering, level shifting, transimpedance conversion, and differential sensing. Key characteristics include 500 kHz bandwidth, 230 V/ms slew rate, 550 µV typical offset voltage, 6 µV/°C typical offset drift, 15 pA typical input-bias current, and 20 µA typical amplifier supply current. Rail-to-rail input and output operation allow signals to use nearly the complete 1.8 V to 3.6 V supply range. The 500 kHz bandwidth gives useful closed-loop performance for moderate-frequency signals while keeping quiescent current low at 20 µA per amplifier. This bandwidth-to-power balance is appropriate for portable sensor nodes, where a higher-speed amplifier may add unnecessary supply demand. The 230 V/ms slew rate preserves large-signal response, while the 95 nV/√Hz noise density supports low-noise measurement of slow analog signals. Typical uses include battery-powered sensor conditioning, portable medical monitoring, industrial current measurement, low-voltage data acquisition, and general-purpose analog filtering. In each case, the device can operate directly from a 1.8 V rail and provide input or output headroom that is difficult to obtain with a conventional non-rail-to-rail amplifier. Designers should verify input and output common-mode limits, output swing, capacitive-load stability, and noise performance under the intended supply and load conditions. Place bypass capacitors close to the supply pins, keep feedback routing compact, and avoid excessive loading on the output. Although the SOIC-8 outline supports conventional board assembly, the low package thermal limit still requires consideration of power dissipation during sustained high-output-current operation. This page organizes the TLV2762CD electrical characteristics, package information, verified drop-in candidates, application guidance, and design considerations into a compact engineering reference for low-voltage analog design.

RFQ İletişim
TLV2762ID - Dual 1.8V 500kHz RRIO Op Amp | Texas Instruments
TLV2762ID

TLV2762ID - Dual 1.8V 500kHz RRIO Op Amp | Texas Instruments

The Texas Instruments TLV2762ID is a dual, micropower, rail-to-rail input and output operational amplifier designed for single-supply systems operating from 1.8 V to 3.6 V. It combines 500 kHz gain-bandwidth product, approximately 20 microampere quiescent current, and rail-to-rail operation in an 8-pin SOIC package. These characteristics make the TLV2762ID suitable for portable instrumentation, battery-powered sensing, low-power signal conditioning, and mixed-voltage interfaces. An operational amplifier is a voltage-amplifying building block that uses high open-loop gain to control an output over a wide input range. Rail-to-rail input amplifiers accept signals close to the positive and negative supply rails, while rail-to-rail outputs can swing close to those limits under typical load conditions. Within the amplifier hierarchy, the TLV2762 belongs to the micropower operational-amplifier family and provides two amplifiers in one package for space-constrained designs. Key features include a 1.8 V minimum operating supply, 500 kHz bandwidth, approximately 20 microampere quiescent current, and rail-to-rail input and output capability. The low quiescent current limits the supply current drawn when both amplifiers operate continuously, making the device appropriate for portable equipment that spends significant time monitoring low-frequency sensor signals rather than processing high-bandwidth waveforms. The TLV2762ID combines a speed-versus-power balance that is useful in general-purpose signal chains. A 500 kHz gain-bandwidth product supports moderate closed-loop gains while retaining a compact, low-power implementation. Because the device operates from a single positive supply down to 1.8 V, it can be powered directly from low-energy systems without a negative rail. Designers should still check input and output common-mode limits, capacitive-load stability, output-current capability, and the exact operating limits in the manufacturer datasheet before fixing the circuit. Typical uses include low-voltage sensor amplifiers, portable measurement systems, current-sense signal conditioning, audio preamplification, and interface buffering. The 8-pin SOIC outline also supports standard surface-mount assembly and hand-soldering workflows. In designs where output noise or channel matching is more important than bandwidth, an application-specific dual amplifier with integrated filtering may provide a better system fit. A practical design rule is to keep input, feedback, and decoupling connections short, then verify stability with the actual source impedance and load capacitance. Place the supply-bypass capacitor close to the positive rail pin and route the ground return directly to the device ground pin. If the amplifier drives a long cable, ADC input, or capacitive load, add an isolation resistor close to the output and confirm settling behavior with oscilloscope measurements. This page combines the manufacturer product information, distributor listings, pin-level guidance, drop-in alternatives, and application-focused design notes to support faster component selection and PCB planning.

RFQ İletişim
TLV2762IP - Dual 1.8V Micropower RRIO Op Amp | Texas Instruments
TLV2762IP

TLV2762IP - Dual 1.8V Micropower RRIO Op Amp | Texas Instruments

Texas Instruments TLV2762IP is a dual micropower rail-to-rail input/output operational amplifier with shutdown, optimized for low-voltage, low-power signal-conditioning systems. The device operates from a 1.8 V minimum supply and uses only 20 uA per channel in the stated low-power operating condition, with shutdown current listed as 10 nA per channel. Its rail-to-rail input and output behavior supports operation across the available supply range, while a 500 kHz gain-bandwidth product provides useful bandwidth for general-purpose signal processing. The TLV2762IP is packaged in an 8-pin PDIP package. The TLV2762 belongs to the operational-amplifier hierarchy, where an operational amplifier is a voltage-feedback analog IC used to amplify, buffer, filter, or condition low-level signals. A rail-to-rail input/output amplifier is designed to accept and produce signals close to the positive and negative supply rails, making it useful in battery-powered sensors, portable instrumentation, and low-voltage industrial control systems. The micropower operating current helps reduce the energy required by continuously powered measurement equipment. The principal electrical characteristics include 1.8 V operation, a maximum recommended supply voltage of 3.6 V, 500 kHz bandwidth, 20 uA per channel supply current, and 10 nA per channel shutdown current. The TLV2762 family is identified as providing rail-to-rail input/output operation and CMOS-compatible shutdown behavior. These characteristics make the part suitable for portable sensor interfaces, low-energy monitoring modules, battery-powered test equipment, and embedded analog signal-conditioning circuits. The device is intended for single-supply operation, with the signal path operating from one supply rail and ground. Design should include input and output capacitance appropriate to the application, stable feedback-network design, and careful routing to minimize parasitic effects. The TLV2762IP package is an 8-pin PDIP, which supports through-hole prototyping and insertion into conventional DIP footprints. This page combines manufacturer-family electrical characteristics, package information, sourcing guidance, and application-oriented design notes to support component selection and PCB implementation.

RFQ İletişim
TLV2763IN - Dual 1.8V Micropower RRIO Op Amp | TI
TLV2763IN

TLV2763IN - Dual 1.8V Micropower RRIO Op Amp | TI

Texas Instruments TLV2763IN is a dual, 1.8 V micropower rail-to-rail input/output operational amplifier with shutdown, packaged in a 14-pin PDIP. The two amplifier channels operate from a single supply, provide a typical gain-bandwidth product of 500 kHz, and are suitable for low-voltage, low-power signal-conditioning systems. The TLV2763IN combines rail-to-rail inputs and outputs with a typical supply current of 20 µA per channel. A rail-to-rail-input and rail-to-rail-output operational amplifier, commonly described as a RRIO amplifier, can accept input signals near the positive and negative supply rails while driving loads toward those limits. This makes the TLV2763IN useful when the usable input range must extend beyond conventional common-mode limits. As a dual amplifier in a 14-pin PDIP, it can implement two independent gain or buffer stages while simplifying through-hole prototype construction. Key characteristics include 1.8 V single-supply operation, dual-channel operation, 500 kHz typical gain-bandwidth product, 20 µA typical supply current per channel, and 10.2 mA typical output current. Shutdown support is particularly useful for battery-powered instrumentation because the amplifiers can be disabled when signal-chain activity is not required, reducing system power consumption. The TLV2763IN belongs to the operational-amplifier hierarchy, where it combines low input and output swing limits, low quiescent current, and moderate bandwidth. Its rail-to-rail behavior makes it appropriate for sensor interfaces, portable measurement systems, battery monitoring, and low-voltage analog signal chains. The shutdown function also supports duty-cycled acquisition circuits where preserving standby power is important. Typical applications include portable sensor conditioning, low-voltage data acquisition, current-loop signal processing, audio preamplification, and general-purpose dual-stage amplification. Its 500 kHz bandwidth is appropriate for low-frequency and moderate-bandwidth instrumentation rather than high-speed video or RF signal paths. The 10.2 mA typical output-current capability is sufficient for buffer and low-load drive applications. When designing around the TLV2763IN, account for the dropout region, output-capacitance stability requirements, input bias-current effects, and the shutdown logic level. Place input and output compensation components close to the relevant pins and avoid excessive capacitive loading at the output. Use the manufacturer datasheet pin-description table and typical application circuits to confirm external component values and logic thresholds before production release. This page combines the manufacturer operating characteristics, package information, application guidance, and engineering-focused replacement analysis for the TLV2763IN. It also identifies the critical distinctions between genuine same-footprint alternatives and devices that are only functionally similar, helping engineers make a board-level decision without relying on incomplete catalog descriptions.

RFQ İletişim
TLV2764ID - Quad 500kHz RRIO Op Amp | Texas Instruments
TLV2764ID

TLV2764ID - Quad 500kHz RRIO Op Amp | Texas Instruments

The Texas Instruments TLV2764ID is a quad, rail-to-rail input and output operational amplifier optimized for low-voltage, low-power signal conditioning. It operates from 1.8 V to 3.6 V, provides a 500 kHz gain-bandwidth product, and is packaged in a 14-pin SOIC. The four amplifiers share a common supply range and provide a practical combination of low quiescent current and useful closed-loop bandwidth for portable and industrial systems. An operational amplifier is a high-gain, differential-input analog building block used to amplify, buffer, filter, compare, or reshape signals. The TLV2764 belongs to the rail-to-rail input/output amplifier family within the broader operational amplifier, analog IC, and semiconductor hierarchies. Rail-to-rail input operation increases the usable input range near either supply rail, while rail-to-rail output operation improves output swing on low-voltage systems where conventional amplifier headroom is limited. The TLV2764ID integrates four amplifiers in one package, reducing board area and simplifying multi-channel designs. Key characteristics include a 500 kHz bandwidth, approximately 20 uA supply current per amplifier, and operation down to 1.8 V. These features make the device suitable for sensor conditioning, current-voltage conversion, low-voltage filtering, and general-purpose embedded analog signal paths where power consumption and integration are important. The device is built for general-purpose analog applications operating across an industrial temperature range of -40 °C to 85 °C. Its 14-pin SOIC package supports conventional surface-mount assembly and is suitable for prototypes as well as production boards. The quad organization is especially useful when four related channels are needed, such as sensing multiple inputs, driving balanced circuitry, or implementing active filtering in compact instrumentation. Typical uses include battery-powered sensor interfaces, portable measurement systems, industrial control modules, low-voltage data-acquisition nodes, and embedded analog signal conditioning. A 500 kHz bandwidth supports signals well beyond slow sensor outputs while retaining the low supply current required by compact embedded systems. Its rail-to-rail behavior also makes it useful when signal levels occupy much of the available supply range. Designers should verify input and output common-mode limits, output-current capability, noise, offset, and stability requirements against the manufacturer datasheet. Decoupling capacitors should be placed close to the supply pins, and unused amplifier channels should be configured according to the recommended stable-input network. PCB grounding and signal routing should minimize parasitic feedback around high-gain stages. This page combines device specifications, practical application guidance, pin-package information, and a strict same-footprint replacement analysis. It also distinguishes functionally similar amplifier families from genuine pin-to-pin options so engineers can assess PCB reuse without mistaking general-purpose similarity for drop-in compatibility.

RFQ İletişim
TLV2764IN - Quad 500 kHz RRIO Op Amp | Texas Instruments
TLV2764IN

TLV2764IN - Quad 500 kHz RRIO Op Amp | Texas Instruments

Texas Instruments TLV2764IN is a quad, rail-to-rail input and output operational amplifier designed for low-voltage, low-power signal conditioning. Each amplifier supports supply voltages down to 1.8 V, operates from a maximum recommended supply of 3.6 V, and provides 500 kHz gain-bandwidth product while drawing only 20 µA per amplifier. The device is packaged in a 14-pin plastic dual in-line package (14-PDIP). An operational amplifier is a high-gain analog signal-conditioning IC used to amplify voltage differences, buffer sensors, drive analog-to-digital converter inputs, and implement filters or feedback-control loops. The TLV2764IN belongs to the operational-amplifier hierarchy, where rail-to-rail input and output operation extends signal range and output swing toward the supply rails, making the device useful in compact battery-powered and low-voltage embedded systems. The four amplifiers provide rail-to-rail inputs and outputs, 500 kHz bandwidth, and operation from 1.8 V to 3.6 V. These characteristics suit low-energy sensor interfaces, portable measurement equipment, audio signal conditioning, and general-purpose analog control. The 20 µA per-amplifier operating current helps reduce the power burden in systems where four active analog channels are required, while the small bandwidth avoids introducing unnecessary high-frequency gain in precision measurement paths. Each channel includes an input common-mode range that extends to both supply rails, and the output stage is designed for rail-to-rail swing. These features simplify signal conditioning when the source can approach either supply rail. The quad organization also reduces the number of packages and board connections needed for systems implementing four independent amplifier functions or several instrumentation stages. Typical uses include low-voltage sensor front ends, battery-powered monitoring, analog-to-digital converter signal conditioning, active filters, and general-purpose buffering. The 14-PDIP package is suitable for through-hole prototypes, educational platforms, and industrial or instrumentation assemblies where the larger package simplifies hand insertion and inspection. Designers should verify input and output common-mode limits, capacitive-load stability, output-current capability, and noise performance against the application operating conditions. Place bypass capacitors close to the supply pins and maintain a clean return path to minimize supply noise and ground-offset errors. This page consolidates the key electrical specifications, package information, functional alternatives, and design considerations needed for initial component selection. For a new design, compare the complete TLV2764 family and package options in the manufacturer datasheet, especially when shutdown control, temperature grade, or package footprint differs from the TLV2764IN requirements. Validate the final amplifier configuration with the intended source impedance, load, supply tolerance, and environmental conditions before production release.

RFQ İletişim
TLV2765CD - 1.8V Micro-Power Quad Op Amp | Texas Instruments
TLV2765CD

TLV2765CD - 1.8V Micro-Power Quad Op Amp | Texas Instruments

The Texas Instruments TLV2765CD is a quad, 1.8 V micro-power rail-to-rail input/output operational amplifier with shutdown, packaged in a 16-pin SOIC. It supports supply voltages up to 3.6 V, consumes approximately 20 uA per channel, and offers a 500 kHz gain-bandwidth product. The TLV2765CD also provides a shutdown current of approximately 10 nA per channel, making it suitable for portable and low-power signal-processing systems. A rail-to-rail input/output operational amplifier is a general-purpose amplifier whose input and output stages operate close to the supply rails. This topology allows the TLV2765CD to process low-voltage signals without requiring a midpoint-bias reference near mid-supply. As a quad amplifier, it combines four amplifier channels, shutdown control, and CMOS input characteristics in one 16-pin SOIC package, reducing board area when several low-voltage signals must be conditioned. The principal features include a low 1.8 V operating supply, a maximum supply voltage of 3.6 V, rail-to-rail input and output operation, and approximately 20 uA of supply current per channel. Shutdown reduces the supply current to approximately 10 nA per channel. The family datasheet identifies a 500 kHz bandwidth for the TLV2765 device and an input offset voltage of 3500 uV for the CD grade. These characteristics make the amplifier appropriate for battery-powered instrumentation, sensor interfaces, and low-voltage analog signal chains. The TLV2765 belongs to the TLV2764 and TLV2765 family of CMOS operational amplifiers with shutdown. Its rail-to-rail input stage supports operation near the lower and upper limits of the supply, while the rail-to-rail output stage provides useful output swing on low-voltage rails. Because the device is intended for micropower systems, total quiescent current and shutdown behavior are central to its system-level power budget. Typical uses include portable sensor conditioning, low-voltage transimpedance stages, battery-powered monitor circuits, general-purpose analog filtering, and embedded data-acquisition interfaces. Designers can use the four channels for gain, buffering, level shifting, active filtering, or comparator-style functions where open-loop operation is appropriate. The shutdown function is useful when one subsystem must be disconnected while the rest of a low-power instrument remains active. PCB design should keep input and feedback paths short and place input-referenced bypass capacitance close to the supply pins. Check output swing against the selected input and output voltages, because rail-to-rail operation does not guarantee a full rail-to-rail output under every load. For stable operation in amplifier configurations, follow the capacitance limits and recommended feedback values in the family datasheet. This product page combines the TLV2765CD operating characteristics with package guidance, application analysis, comparison criteria, and practical design notes. It is intended to help engineers evaluate the TLV2765CD for low-voltage, micro-power signal-processing designs before finalizing a PCB or production BOM.

RFQ İletişim
TLV2770CD - 5.1MHz RRO Op Amp | Texas Instruments
TLV2770CD

TLV2770CD - 5.1MHz RRO Op Amp | Texas Instruments

The Texas Instruments TLV2770CD is a single, rail-to-rail-output CMOS operational amplifier with a 2.7 V minimum supply, 5.5 V maximum supply, 5.1 MHz gain-bandwidth product, and 10.5 V/µs slew rate. The device also includes shutdown capability and is packaged in an 8-pin SOIC. These characteristics place it between the TLV2770 family’s precision-focused CMOS architecture and the requirements of high-speed signal-conditioning systems. A CMOS operational amplifier is a voltage-controlled, differential-input amplifier used to buffer, amplify, filter, or compare analog signals. Its place in the signal-chain hierarchy is signal conditioning within a larger analog or mixed-signal system. Rail-to-rail output capability allows the output to approach the supply rails more closely than a conventional fixed-output amplifier, improving dynamic range in low-voltage systems where every millivolt of signal headroom matters. The TLV2770CD’s principal features include its 5.1 MHz gain-bandwidth product, 10.5 V/µs slew rate, and rail-to-rail output operation. The 5.1 MHz bandwidth supports higher-frequency closed-loop designs than low-frequency precision amplifiers, while the 10.5 V/µs slew rate improves response to large, fast input steps. Its single-amplifier configuration reduces board area in designs that need one independent high-speed channel. A shutdown function can also reduce power use when the signal path is not required continuously. The TLV277x family combines CMOS power characteristics with rail-to-rail output swing, high output drive, and strong DC precision. The TLV2770 differs from related family members by retaining shutdown functionality, making power management an important distinction during replacement. Because the amplifier operates from a maximum 5.5 V supply, it is primarily intended for low-voltage systems and should not be treated as a direct replacement for an op amp rated for substantially higher supply voltages. Typical uses include active filtering, sensor signal conditioning, low-voltage data acquisition, audio and communication interfaces, and general-purpose analog amplification. The combination of 5.1 MHz bandwidth and 10.5 V/µs slew rate is useful when the signal must be amplified without adding excessive delay. The shutdown feature also makes the device suitable for portable equipment and partitioned analog systems that can disable an inactive channel. For layout, place the amplifier near the source and load to minimize trace capacitance and interference, and provide a solid ground reference. Decoupling capacitors should be connected close to the supply pins. Before using shutdown in a new design, consult the manufacturer pin description and truth table to confirm the required control level and operating state. This page combines the TLV2770CD’s principal technical characteristics, verified sourcing information, drop-in replacement analysis, application guidance, and design notes. It is intended to help engineers assess bandwidth, supply voltage, shutdown behavior, package compatibility, and PCB integration before committing the amplifier to a production design.

RFQ İletişim
TLV2770ID - 5.1 MHz High-Slew-Rate Op Amp | TI
TLV2770ID

TLV2770ID - 5.1 MHz High-Slew-Rate Op Amp | TI

The Texas Instruments TLV2770ID is a single CMOS operational amplifier with a 5.5 V maximum supply, 5.1 MHz gain-bandwidth product, and 10.5 V/μs high slew rate, housed in an 8-pin SOIC package. The device provides rail-to-rail output swing, high output drive, excellent DC precision, and a shutdown function for controlled low-power operation. Its supply current is approximately 1 mA per channel, making it suitable for portable, industrial, and instrumentation signal-conditioning systems. A CMOS operational amplifier is an analog integrated circuit that amplifies voltage differences while operating from a positive supply, a negative supply, or a single supply configuration. Operational amplifiers form the foundation of analog signal chains, where they perform functions such as buffering, amplification, filtering, level shifting, current-to-voltage conversion, and active feedback control. The TLV2770 combines a wide bandwidth with high slew rate to support signals that require both fast response and accurate output voltage control. The headline specifications provide a clear balance between speed and efficiency. A 5.1 MHz gain-bandwidth product supports moderate-frequency signal amplification, while the 10.5 V/μs slew rate allows the output to change rapidly without the severe distortion associated with slower amplifiers. Rail-to-rail output operation improves usable output range in low-voltage systems, and the approximately 1 mA supply current helps limit power consumption when the shutdown function is not being used. The TLV2770ID combines high-speed AC performance with the DC precision expected of the TLV277x CMOS family. Its single-amplifier configuration avoids the additional channels and package area associated with a dual or quad device. An integrated shutdown path supports designs that periodically disable the amplifier, reducing activity during inactive intervals. Designers should still confirm shutdown-control polarity, timing, output behavior, and input-state requirements against the manufacturer datasheet before finalizing a power-sequencing scheme. Typical uses include sensor-signal conditioning, low-level analog amplification, active filtering, data-acquisition front ends, industrial control loops, and portable instrumentation. The 8-pin SOIC format supports conventional PCB assembly and rework, while the 2.7 V to 5.5 V operating range accommodates both 3.3 V and 5 V systems. In battery-powered equipment, low supply current and shutdown capability can help reduce average energy use when the amplifier operates intermittently. The main design consideration is the tradeoff between speed, output swing, noise, and power. The 10.5 V/μs slew rate makes the amplifier appropriate for fast signal transitions, but it may require additional attention to output-load drive, feedback stability, input common-mode range, and decoupling when driving long PCB traces or capacitive loads. Place the bypass capacitor close to the supply pins and use the pin-description table in the manufacturer datasheet when assigning PCB tracks. This product page consolidates the manufacturer specifications, verified package information, sourcing guidance, comparison limits, and practical application considerations into a focused engineering reference. It also distinguishes true pin-compatible alternatives from related amplifiers that require different shutdown connections, preventing a superficially similar device from being treated as a drop-in replacement.

RFQ İletişim
TLV2770IP - 5.1MHz Rail-to-Rail Op Amp | Texas Instruments
TLV2770IP

TLV2770IP - 5.1MHz Rail-to-Rail Op Amp | Texas Instruments

Texas Instruments TLV2770IP is a single operational amplifier with rail-to-rail output, a 5.5 V maximum supply, 5.1 MHz gain-bandwidth product, and a 10.5 V/µs slew rate in an 8-PDIP package. It includes shutdown support and operates from a 2.7 V minimum supply, making it suitable for low-voltage analog signal conditioning where fast response and rail-to-rail output drive are important. An operational amplifier, commonly called an op amp, is a voltage-gain element used to amplify small signals, buffer high-impedance sources, compare voltages, or drive analog stages. The TLV2770 belongs to the single-amplifier family within the broader hierarchy of analog integrated circuits, analog signal-chain ICs, and power-management-aware semiconductor designs. Its rail-to-rail output stage is intended to produce useful output voltage closer to the supply rails than a conventional output stage. The headline characteristics are a 5.1 MHz gain-bandwidth product, a 10.5 V/µs slew rate, and operation from 2.7 V to 5.5 V. These specifications suit applications such as sensor-signal conditioning, active filtering, audio preamplification, and general-purpose analog buffers. The shutdown function provides a way to reduce power use when the amplifier is not needed, which can be useful in portable and intermittently powered systems. Technically, gain-bandwidth product describes the relationship between closed-loop gain and bandwidth, while slew rate limits how quickly the output can move through large voltage changes. The TLV2770's combination favors relatively fast small-signal operation and reasonably clean large-signal transitions. Designers should still verify noise, input-offset voltage, output-current capability, stability, and load behavior against their exact operating conditions before releasing a production design. Typical applications include low-voltage sensor interfaces, precision current-feedback signal paths, active low-pass filters, audio input stages, battery-powered instrumentation, and general analog signal conditioning. The 8-PDIP through-hole package is useful for prototypes, educational platforms, repair assemblies, and designs where a socketed DIP footprint is preferred over a compact surface-mount package. A key design consideration is bypassing the supply pins with short, low-inductance connections and placing stable input and feedback networks close to the amplifier. Confirm the shutdown-pin logic and timing in the manufacturer datasheet before using the device for power sequencing. Because this is an analog IC rather than a power semiconductor, a safe operating area chart is not applicable. This product record combines manufacturer and distributor information with application guidance, comparison parameters, and practical design notes. It highlights the TLV2770IP's 2.7 V minimum supply, 5.5 V maximum supply, 5.1 MHz bandwidth, 10.5 V/µs slew rate, rail-to-rail output, shutdown capability, and 8-PDIP packaging in one engineering-focused reference.

RFQ İletişim
TLV2771CD - 5.1MHz High-Slew-Rate Op Amp | Texas Instruments
TLV2771CD

TLV2771CD - 5.1MHz High-Slew-Rate Op Amp | Texas Instruments

The Texas Instruments TLV2771CD is a single operational amplifier with a 5.5 V maximum supply voltage, 5.1 MHz gain-bandwidth product, and 10.5 V/µs high slew rate, housed in an 8-pin SOIC package. It combines rail-to-rail output operation with the bandwidth and slew rate needed for responsive signal conditioning. The TLV2771CD is intended for instrumentation, buffering, filtering, and general-purpose analog signal-chain applications where a compact, high-speed amplifier is required. An operational amplifier is an analog integrated circuit that amplifies the difference between two input voltages. As a voltage-feedback amplifier, it belongs to the broader hierarchy of amplifier ICs, instrumentation amplifiers, analog signal-processing ICs, and semiconductors. Its high gain and negative-feedback operation make it useful for sensor interfaces, waveform conditioning, active filters, and low-level signal amplification where signal integrity and response speed are important. The principal performance features are the 5.1 MHz gain-bandwidth product, 10.5 V/µs slew rate, and rail-to-rail output. These characteristics allow the amplifier to reproduce fast-moving waveforms with less distortion than lower-bandwidth general-purpose amplifiers. A 5.5 V maximum supply voltage also supports compact systems operating below 6 V, while the single-amplifier configuration avoids the space and power requirements of a dual or quad device when only one signal path is needed. Technologically, the TLV2771CD combines CMOS-compatible low-power operation with high-speed, high-output-drive characteristics. The 10.5 V/µs slew rate is particularly useful when driving finite-capacitance loads or following sensor and comparator outputs. Rail-to-rail output maximizes usable signal range at the load, although input common-mode range, output-current behavior, input-bias current, noise, and offset specifications should be checked against the exact circuit requirements before finalizing a precision design. Typical uses include sensor-signal conditioning, buffered data acquisition, active analog filtering, communications-interface support, and industrial control or test equipment. It is particularly suitable when a design needs more bandwidth than a general-purpose micropower amplifier but does not require the very low noise or precision offset of a specialized instrumentation amplifier. One amplifier per package also supports designs with isolated signal paths or low channel counts. For PCB implementation, use the manufacturer’s recommended SOIC-8 land pattern, place decoupling close to the supply pins, and avoid long return paths beneath sensitive input nodes. Check output swing, load capacitance, and stability requirements against the operating voltage. Because the SOIC package has exposed lead geometry and limited heat-dissipation area, use appropriate copper spreading and temperature-rise analysis when driving sustained heavy loads. This page combines the TLV2771CD’s core electrical characteristics with focused application guidance, package considerations, drop-in alternatives, and a parameter-by-parameter comparison. These engineering-oriented details help determine whether the amplifier’s 5.1 MHz bandwidth, 10.5 V/µs slew rate, and 5.5 V supply limit align with the target analog signal chain before layout and prototype work begin.

RFQ İletişim
TLV2771ID - 5.1 MHz, 10.5 V/us Rail-to-Rail Op Amp | TI
TLV2771ID

TLV2771ID - 5.1 MHz, 10.5 V/us Rail-to-Rail Op Amp | TI

The Texas Instruments TLV2771ID is a single, 5.5 V, 5.1 MHz operational amplifier with a 10.5 V/us slew rate and rail-to-rail output, housed in an 8-pin SOIC package. The low-voltage CMOS device combines a 2.7 V minimum supply, approximately 1 mA supply current per channel, and rail-to-rail output capability for compact, high-speed analog signal-conditioning systems. An operational amplifier is an analog integrated circuit that amplifies the voltage difference between its inverting and non-inverting inputs. The TLV2771 belongs to the CMOS operational-amplifier hierarchy, where low supply voltage, low power consumption, and moderate-to-high bandwidth support portable, industrial, communications, and sensor-interface applications. Its rail-to-rail output lets the output approach the supply rails more closely than a conventional fixed-output amplifier. Three defining performance characteristics are the 5.1 MHz gain-bandwidth product, 10.5 V/us slew rate, and approximately 1 mA supply current per channel. The bandwidth supports higher-frequency closed-loop designs, while the slew rate determines how quickly the output can move through signal transitions. The single-amplifier configuration also reduces board area and power consumption compared with using a dual or quad package when only one amplifier is required. The TLV2771 family combines high slew rate and bandwidth with rail-to-rail output swing and high output drive. These characteristics make the device useful in active filters, signal buffers, level translators, transducers, and low-voltage analog front ends. Its CMOS implementation is particularly appropriate when low quiescent power and operation from a compact supply are more important than the very lowest input offset voltage available from precision bipolar amplifiers. Typical uses include sensor signal conditioning, communications-channel interfaces, audio and control-signal paths, industrial acquisition modules, and portable instrumentation. The 5.1 MHz bandwidth provides useful margin for moderate-frequency active filtering, while the 10.5 V/us slew rate improves large-signal response compared with slower general-purpose CMOS amplifiers. The 8-SOIC package supports conventional surface-mount assembly and thermal copper patterns. When designing around the TLV2771ID, account for output-swing limits under load, input common-mode range, capacitive-load stability, and shutdown-pin logic. Place bypass capacitance close to the supply pins, preserve the manufacturer-recommended feedback topology, and verify settling time at the intended closed-loop gain. These checks are especially important when driving ADC front ends, long interconnects, or capacitive sensor outputs. This product record combines the device's principal electrical characteristics, package and thermal details, pin-location guidance, application-specific design guidance, and same-footprint alternatives. It also highlights practical selection trade-offs involving shutdown operation, bandwidth, slew rate, supply current, and input precision so engineers can determine whether the TLV2771ID matches both the electrical and mechanical requirements of a new design.

RFQ İletişim
TLV2772CD - Dual 5.1MHz RRIO Amplifier | Texas Instruments
TLV2772CD

TLV2772CD - Dual 5.1MHz RRIO Amplifier | Texas Instruments

Texas Instruments TLV2772CD is a dual CMOS operational amplifier with two independent channels, 5.5 V maximum supply voltage, 5.1 MHz gain-bandwidth product, 10.5 V/µs slew rate, and rail-to-rail output operation in an 8-pin SOIC package. Each channel combines high AC performance with low supply current of 1 mA, making the device suitable for portable instrumentation, signal conditioning, and low-voltage analog systems. An operational amplifier is a voltage-gain building block used to amplify small sensor and control signals, buffer imperfect sources, implement active filters, and drive analog-to-digital converter inputs. The TLV2772 belongs to the CMOS operational amplifier hierarchy, combining low power consumption with the bandwidth and slew rate needed for higher-speed signal chains. Its rail-to-rail output allows the output voltage to approach the supply rails more closely than a conventional fixed-output amplifier. Key features include a 5.1 MHz unity-gain bandwidth, 10.5 V/µs slew rate, and 1 mA supply current per channel. The dual configuration provides two amplifiers in one package, reducing board area for paired signal paths. Shutdown support can reduce supply demand when the amplifiers are not needed, although operating behavior during shutdown requires verification against the manufacturer datasheet. The 8-pin SOIC package is also compatible with conventional surface-mount assembly methods. The TLV2772 family combines high bandwidth, high output drive, rail-to-rail output swing, and good DC precision. Its 10.5 V/µs slew rate gives it substantially more dynamic range than slower general-purpose CMOS amplifiers, making it useful for pulse, waveform, and feedback-control applications. The 5.1 MHz bandwidth supports closed-loop operation at frequencies suitable for audio, communications, industrial measurement, and embedded analog interfaces. Typical uses include portable sensor conditioning, low-voltage data-acquisition channels, active audio filters, motor and actuator feedback networks, and general-purpose buffering. The device is especially relevant where a designer needs faster edge rates than conventional low-power amplifiers while retaining roughly 1 mA of supply current per active channel. Rail-to-rail output operation also expands usable output range in systems operated close to the positive supply limit. Designers should verify input common-mode limits, output-current capability, noise, offset voltage, and shutdown timing before finalizing a circuit. Keep feedback-loop compensation appropriate for the selected closed-loop gain, provide stable reference and feedback paths, and use short, low-impedance routing where high-frequency behavior matters. Decoupling capacitors should be placed close to the supply pins to minimize supply noise and local impedance. This product page combines manufacturer specifications, practical application guidance, lifecycle information, and pin-level design references. It also identifies the technical distinctions that matter when evaluating this amplifier against same-package alternatives, including bandwidth, supply current, shutdown behavior, precision, and qualification requirements.

RFQ İletişim
TLV2772ID - Dual 5.1MHz High-Slew-Rate Op Amp | Texas Instruments
TLV2772ID

TLV2772ID - Dual 5.1MHz High-Slew-Rate Op Amp | Texas Instruments

Texas Instruments TLV2772ID is a dual CMOS operational amplifier with rail-to-rail output, a 5.5 V maximum supply, 5.1 MHz gain-bandwidth product, and a 10.5 V/us slew rate. The device is offered in an 8-pin SOIC package and includes shutdown capability within the TLV277x family. An operational amplifier is a voltage-gain amplifier that uses external feedback to control gain and signal behavior. Operational amplifiers form the basic building blocks of analog signal chains, where they perform functions such as buffering, amplification, level shifting, filtering, active gain control, and impedance conversion. In a precision instrumentation system, they help condition small sensor signals before conversion or further processing. The TLV2772ID combines a 5.1 MHz gain-bandwidth product with a relatively high 10.5 V/us slew rate. These characteristics allow the amplifier to respond to rapidly changing input signals while operating from a supply of up to 5.5 V. Rail-to-rail output operation supports signal swings near the upper and lower limits of the available output range, although the usable swing still depends on output current, load, and supply voltage. Each TLV2772ID package contains two amplifier channels. The family is designed for low-voltage analog systems where rail-to-rail output, bandwidth, and slew-rate performance are important. A CMOS implementation and a shutdown function make the device applicable to portable instrumentation, battery-powered measurement systems, and designs that require controlled amplifier turn-off. The manufacturer classifies the TLV2772 as a high-slew-rate, rail-to-rail-output operational amplifier. Typical applications include low-level sensor signal conditioning, portable data-acquisition front ends, audio and communication interface circuits, buffer stages, and general-purpose analog amplification. In these systems, the 5.1 MHz bandwidth and 10.5 V/us slew rate help preserve signal fidelity when operating at higher signal frequencies or driving moderate capacitive loads. When designing around the TLV2772ID, verify the input common-mode range, output swing, noise, offset, and capacitive-load stability in the Texas Instruments datasheet Rev. G for the exact channel and supply conditions. Place input and feedback components close to the amplifier pins, and use short, low-impedance routing to avoid parasitic capacitance and feedback-loop instability. This page combines the manufacturer’s identified electrical characteristics with application guidance, drop-in-family alternatives, package information, and engineering-focused selection considerations. It is designed to help designers determine whether the TLV2772ID’s dual-channel architecture, supply rating, bandwidth, slew rate, and SOIC footprint fit a low-voltage analog design.

RFQ İletişim
TLV2773CD - Dual 5.1MHz R-R Op Amp | Texas Instruments
TLV2773CD

TLV2773CD - Dual 5.1MHz R-R Op Amp | Texas Instruments

The Texas Instruments TLV2773CD is a dual, rail-to-rail output operational amplifier with shutdown, a 5.5 V maximum supply, 5.1 MHz gain-bandwidth product, and a 10.5 V/µs slew rate in a 14-pin SOIC package. It combines two amplifier channels, shutdown control, and low-power operation in one circuit for compact signal-conditioning designs. An operational amplifier, or op amp, is a voltage amplifier whose closed-loop behavior is determined mainly by external feedback components. The TLV2773 belongs to the linear amplifier hierarchy, combining rail-to-rail output capability, wide bandwidth, and shutdown control in a dual amplifier. These characteristics place it between general-purpose precision amplifiers and high-speed buffer-oriented devices. The TLV2773's 5.1 MHz gain-bandwidth product supports signal amplification over a broad range of frequencies. Its 10.5 V/µs slew rate allows the output to move rapidly between voltage levels, which is useful when driving moderate capacitive loads or processing rapidly changing waveforms. Rail-to-rail output operation provides usable output-voltage range close to the supply rails, while shutdown support can reduce system power when the amplifier is not needed. The 14-pin SOIC package contains two amplifier channels and the associated shutdown and supply connections. Because the part operates from a low-voltage 5.5 V maximum supply, it is particularly suitable for compact battery-powered equipment, portable instrumentation, low-voltage sensor interfaces, and consumer systems. Rail-to-rail output behavior helps preserve signal swing in applications where the usable output range is restricted by the available supply voltage. Typical uses include sensor signal conditioning, low-voltage audio paths, portable measurement systems, control-loop amplifiers, and general-purpose buffering around sensors and mixed-signal systems. The shutdown function is especially useful in multi-function portable equipment where the amplifier may operate only during a measurement interval. Its bandwidth makes it preferable to slower precision-oriented amplifiers when waveform edges must be preserved. When designing a circuit, account for the output-current capability, capacitive-load stability, input-common-mode range, and output-voltage swing before using the amplifier with large capacitive loads or unusual bias conditions. Keep sensitive input and feedback paths short, maintain stable reference and feedback components, and follow the manufacturer's recommended decoupling arrangement to minimize noise and instability. This product data combines the manufacturer's device characteristics with application guidance, package-focused selection criteria, and a clear review of same-family replacement options. It is intended to help engineers confirm rail-to-rail operation, bandwidth, slew rate, shutdown behavior, and footprint compatibility before committing a 14-SOIC design to production.

RFQ İletişim
TLV2773CN - Dual 5.1 MHz Rail-to-Rail Op Amp | Texas Instruments
TLV2773CN

TLV2773CN - Dual 5.1 MHz Rail-to-Rail Op Amp | Texas Instruments

Texas Instruments TLV2773CN is a dual CMOS operational amplifier with shutdown, designed for low-voltage systems operating from 2.7 V to 5.5 V. Each channel delivers 5.1 MHz of gain-bandwidth product and a 10.5 V/µs slew rate, while the rail-to-rail output stage supports operation close to the positive and negative supply rails. The device is offered in a 14-PDIP package measuring 0.300 inch, or 7.62 mm, across the package body. An operational amplifier is an analog integrated circuit that amplifies the difference between its inverting and non-inverting inputs. A dual device contains two independent amplifiers in one package, reducing board area when a signal path needs two gain stages. The TLV2773 belongs to the amplifier hierarchy: operational amplifier, analog amplifier, analog signal-conditioning IC, and integrated circuit. Its rail-to-rail output capability is useful when the usable signal range must extend toward either supply rail. The main performance features are the 5.1 MHz gain-bandwidth product, the 10.5 V/µs slew rate, and the shutdown function. The bandwidth permits moderate-frequency signal amplification, while the slew rate helps the outputs track larger input steps with less distortion. The shutdown control supports systems that need to reduce activity when a circuit is idle, although power-consumption figures should be taken from the manufacturer datasheet for the exact operating state. The TLV2773 family uses a CMOS process and is specified for rail-to-rail output operation. Input common-mode range, output-voltage swing, offset voltage, input bias current, noise density, and supply-current characteristics should be confirmed in the manufacturer datasheet before precision amplifier calculations or ac-versus-dc sensitivity analysis. Typical uses include low-voltage sensor conditioning, buffered analog measurement chains, audio preamplification, active filtering, and general-purpose dual-amplifier signal processing. The 14-PDIP package also makes the device suitable for prototypes, educational laboratories, through-hole prototypes, and industrial or instrumentation assemblies where a socketed or manually assembled dual amplifier is preferred. Designers should verify shutdown pin polarity, input and output voltage limits, unity-gain stability, and decoupling requirements in the pin-description table and recommended operating conditions. Place the supply bypass capacitor close to the device and route sensitive input and feedback traces away from switching nodes. This page consolidates the manufacturer product information, package details, sourcing guidance, and design considerations needed for an initial engineering evaluation.

RFQ İletişim
TLV2774CD - Quad 5.1MHz Rail-to-Rail Op Amp | Texas Instruments
TLV2774CD

TLV2774CD - Quad 5.1MHz Rail-to-Rail Op Amp | Texas Instruments

Texas Instruments TLV2774CD is a quad CMOS operational amplifier rated for a 5.5 V maximum supply voltage, 5.1 MHz gain-bandwidth product, and 10.5 V/μs slew rate. The device is packaged in a 14-pin SOIC (D) and combines four amplifiers with rail-to-rail output capability. These characteristics place it in the operational-amplifier IC hierarchy, where it bridges precision signal conditioning and higher-speed analog signal processing. An operational amplifier is a voltage-gain building block that compares an input signal with a feedback network. The TLV2774CD provides four channels in one package, allowing designers to implement filters, amplifiers, level conversions, sensing paths, and signal-conditioning stages while reducing board area. Its rail-to-rail output swing supports operation near the supply rails, while the 10.5 V/μs slew rate improves responsiveness for moderate-frequency waveforms and load-step recovery. The 5.1 MHz gain-bandwidth product and 10.5 V/μs slew rate are the primary dynamic performance indicators. A wider bandwidth supports higher closed-loop operating frequencies, while slew rate governs how quickly the output can change for larger voltage transitions. The four-channel architecture is particularly useful when several nodes require similar amplification or filtering, but common signal-ground and power-distribution quality remain essential for predictable behavior. Typical uses include low-frequency sensor conditioning, audio signal paths, instrumentation, current-feedback or voltage-feedback filtering, and general-purpose analog amplification. The 5.5 V maximum supply rating makes the device appropriate for systems operating below that limit. Circuit designers should still verify input and output common-mode limits, output-current capability, capacitive-load behavior, and shutdown-control logic against the manufacturer datasheet before finalizing a design. The principal design consideration is rail-to-rail behavior at the output. Designers should account for the output swing remaining inside the usable supply range, ensure feedback components preserve intended noise and stability behavior, and place bypassing capacitance close to the power pins. Decoupling helps isolate the amplifier from supply ripple and high-frequency coupling, while keeping sensitive input nodes away from switching-current paths reduces signal-integrity risk. This page organizes the TLV2774CD’s key specifications, pin-compatible family options, application guidance, and design trade-offs into one engineering-focused reference. It also distinguishes the standard CD ordering code from other TLV2774 qualification and package codes so engineers can select a replacement without changing the 14-pin SOIC board footprint.

RFQ İletişim
TLV2774ID - Quad 5.1MHz High-Slew-Rate Op Amp | Texas Instruments
TLV2774ID

TLV2774ID - Quad 5.1MHz High-Slew-Rate Op Amp | Texas Instruments

The Texas Instruments TLV2774ID is a four-channel CMOS operational amplifier with a 5.5 V maximum supply voltage, 5.1 MHz gain-bandwidth product, and 10.5 V/us slew rate in a 14-pin SOIC package. It combines rail-to-rail output swing, high output-drive capability, low supply current of 1 mA per channel, and excellent DC precision for compact analog signal-processing systems. An operational amplifier is a voltage-feedback amplifier used to amplify, buffer, filter, compare, or drive analog signals. The TLV2774 belongs to the broader hierarchy of operational amplifier, analog amplifier, analog signal-conditioning IC, and semiconductor. Its combination of moderate bandwidth, high slew rate, low quiescent current, and rail-to-rail output makes it useful where fast settling and compact power consumption are more important than very low offset or extremely high precision. The quad configuration provides four amplifiers in one 14-pin SOIC, reducing board area and simplifying multi-channel designs. Key electrical characteristics include operation from a 2.7 V minimum supply, a 5.5 V maximum supply, 5.1 MHz gain-bandwidth product, 10.5 V/us slew rate, rail-to-rail output swing, and approximately 1 mA supply current per channel. The family also includes a shutdown function, which can reduce system power when the analog section is not active. The 10.5 V/us slew rate allows the amplifier to produce large voltage transitions quickly, while the 5.1 MHz closed-loop bandwidth supports moderate-frequency signal paths. Rail-to-rail output operation improves usable output range on low-voltage supplies, although designers should still verify output-current and output-voltage limits under the intended load. The CMOS implementation supports low-power portable and industrial equipment where each active channel draws about 1 mA. Typical uses include sensor-signal conditioning, low-voltage data acquisition, active filtering, audio and communication signal paths, and general-purpose analog front ends. Quad instrumentation in the same package can be used for instrumentation amplifiers, differential stages, buffer chains, and mixed-signal conditioning. Shutdown-capable channels are particularly helpful in battery-powered systems that periodically disable their analog front end. For PCB implementation, place input and output components close to the relevant amplifier pins and maintain a quiet return path for every channel. Check whether the selected board footprint and pin mapping match the manufacturer pin-description table before final routing. Account for the shutdown-control state during power sequencing because an asserted shutdown level changes the channel operating state rather than simply disconnecting the output. This page combines manufacturer product information, practical design guidance, package details, comparison information, and sourcing questions for engineers evaluating the TLV2774ID. It is intended to support footprint review, signal-chain planning, power-budget checks, and replacement assessment without overlooking the distinction between electrical equivalence and true pin-to-pin drop-in compatibility.

RFQ İletişim
TLV2774IN - 5.1 MHz Quad Rail-to-Rail Op Amp | Texas Instruments
TLV2774IN

TLV2774IN - 5.1 MHz Quad Rail-to-Rail Op Amp | Texas Instruments

Texas Instruments TLV2774IN is a quad CMOS operational amplifier with a 5.1 MHz gain-bandwidth product, 10.5 V/µs slew rate, and rail-to-rail output operation. It operates from 2.7 V to 5.5 V and is packaged in a 14-pin PDIP, identified by the IN ordering suffix. The four amplifiers are designed for low-voltage analog systems requiring fast signal transitions and rail-to-rail output drive. An operational amplifier is a voltage-gain amplifier that compares its input voltage with a feedback-determined reference. When used in a closed-loop configuration, negative feedback causes the output to approach the ideal target voltage. The quad format integrates four amplifiers in one package, reducing board area in designs that require multiple gain, buffering, filtering, or signal-conditioning channels. The TLV2774IN combines a 5.1 MHz gain-bandwidth product with 10.5 V/µs slew rate. These characteristics make it appropriate for higher-bandwidth signal paths than general-purpose low-power amplifiers. Its rail-to-rail output allows the output voltage to approach the positive and negative supply limits, improving usable signal range in low-voltage systems. Each channel consumes 1 mA of supply current according to the family documentation. The CMOS implementation supports low-voltage operation from 2.7 V to 5.5 V while providing high slew rate and output drive. Good DC precision is particularly useful in instrumentation, sensor-conditioning, and feedback-control circuits where offset and bias-related errors can affect system accuracy. The family also includes shutdown functionality, which can reduce supply demand when an analog subsystem is not needed. Typical applications include low-voltage sensor interfaces, current-to-voltage conversion, active filtering, audio and communication signal conditioning, industrial control loops, and portable instrumentation. Multiple amplifiers can implement complete analog front ends without requiring four separate packages. Designers should also consider output loading, stability, noise, and the effect of the chosen feedback network when operating at higher frequencies. For new layouts, place bypass capacitors close to the supply pins and keep feedback paths compact to reduce parasitic feedback. Keep high-speed or high-current output loops physically separate from sensitive amplifier inputs. Verify the input common-mode range, output swing, load capability, and shutdown behavior against the manufacturer datasheet before applying the device outside its intended operating conditions. This page combines the manufacturer’s amplifier specifications with package information, application guidance, drop-in alternatives, and practical design notes. It is intended to help engineers identify whether the TLV2774IN’s combination of quad integration, 5.1 MHz bandwidth, 10.5 V/µs slew rate, and low-voltage CMOS operation fits a particular analog signal chain.

RFQ İletişim
TLV2780ID - 8MHz RRIO Op Amp | TI Signal Conditioning
TLV2780ID

TLV2780ID - 8MHz RRIO Op Amp | TI Signal Conditioning

The Texas Instruments TLV2780ID is a single operational amplifier with rail-to-rail input and output capability, an 8 MHz gain-bandwidth product, operation from a 1.8 V minimum supply, and a shutdown function. The device is packaged in an 8-pin SOIC and is identified by the manufacturer as a single 3.6 V, 8 MHz RRIO amplifier. Its rail-to-rail input allows signals to approach either supply rail, while rail-to-rail output improves dynamic range when the available output voltage is limited. An operational amplifier is an analog signal-conditioning semiconductor that amplifies the voltage difference between its inverting and non-inverting inputs. It belongs to the voltage-feedback operational-amplifier family and the broader linear and mixed-signal IC hierarchy. Common functions include signal buffering, gain amplification, active filtering, level shifting, current-to-voltage conversion, and feedback control. Rail-to-rail input and output operation, abbreviated RRIO, broadens the usable input and output range in low-voltage systems. The TLV2780ID combines an 8 MHz gain-bandwidth product with low-bias-current characteristics and shutdown support. These characteristics make it useful for instrumentation, general-purpose amplification, and buffering circuits operating from low-voltage supplies. Shutdown provides a way to control circuit operating state when conserving power is more important than continuous amplification. The manufacturer classifies the TLV2780ID as a general-purpose amplifier, supporting a broad range of analog signal-path requirements. The device operates down to a 1.8 V supply voltage, while the official product page highlights a 3.6 V operating point and an 8 MHz bandwidth. The TLV278x family provides rail-to-rail input and output capability across the extended industrial temperature range of -40 °C to 125 °C. These figures define the operating envelope for precision control, industrial acquisition, portable instrumentation, and low-voltage embedded analog interfaces where headroom and thermal range are important design constraints. Typical uses include conditioning outputs from sensors, buffering high-impedance analog stages, amplifying low-level differential signals, and implementing active filters. The low-bias-current characteristic is particularly relevant when the amplifier follows a source with high output impedance, because input bias current can create an offset error across the source impedance. The 8 MHz bandwidth also permits useful closed-loop bandwidth in moderate-gain applications rather than restricting the device to very slow precision-only functions. Designers should verify the exact input common-mode limits, output swing, shutdown behavior, stability requirements, input bias current, offset voltage, noise, and supply-current limits against the manufacturer datasheet before finalizing a design. Decoupling, output-load stability, grounding, and shutdown-control sequencing should also be reviewed against the recommended application circuit. Those checks are especially important when the amplifier operates near a supply rail, drives a capacitive load, or sources and sinks signals at the limits of its output swing. This page combines the manufacturer's product information with packaging details, practical application guidance, engineering design notes, and a package-compatible comparison. It is intended to help engineers identify whether the TLV2780ID's low-voltage RRIO performance, 8 MHz bandwidth, low bias current, shutdown function, and 8-pin SOIC implementation fit a particular analog signal-conditioning design.

RFQ İletişim
TLV2781ID - 3.6V, 8MHz RRIO Op Amp | Texas Instruments
TLV2781ID

TLV2781ID - 3.6V, 8MHz RRIO Op Amp | Texas Instruments

The Texas Instruments TLV2781ID is a single-rail operational amplifier designed for low-voltage, high-speed signal conditioning, featuring a 3.6 V supply rating, 8 MHz gain-bandwidth product, and rail-to-rail input/output operation. The device is offered in an 8-pin SOIC package and operates across the extended industrial temperature range from -40°C to 125°C. An operational amplifier is an analog integrated circuit that amplifies the voltage difference between its inverting and non-inverting inputs. The TLV2781 belongs to the voltage-feedback operational-amplifier hierarchy, where rail-to-rail input and output capability allows the amplifier to operate close to the supply rails. This is particularly useful in low-voltage systems because conventional input and output stages may not cover the full available signal range. The TLV2781ID's principal characteristics include one amplifier circuit per package, an 8 MHz gain-bandwidth product, and a 3.6 V maximum specified supply voltage. Its rail-to-rail input capability is useful when sensor outputs or low-level signals move close to ground. Rail-to-rail output improves usable output swing in compact 1.8 V-class systems, although the exact input offset, output-current, noise, and stability limits should be taken from the manufacturer datasheet for the intended operating conditions. Texas Instruments describes the TLV2781 family as high-speed, 1.8 V-capable rail-to-rail input/output operational amplifiers. The 8 MHz bandwidth makes the device suitable for signal paths that require more response than a general-purpose low-speed amplifier but do not require the bandwidth of a high-speed video amplifier. Its extended-temperature rating supports industrial equipment, instrumentation, portable measurement systems, and control loops operating across broad ambient conditions. Typical uses include low-voltage sensor conditioning, current-loop receivers, ADC input drivers, transducers, battery-powered instruments, and general analog signal-processing blocks. The 8-pin SOIC package is also practical for prototypes and through-hole industrial boards where a small surface-mount footprint is desirable. Designers should preserve output-current margin, account for capacitive loading, and select external compensation or isolation when driving unusual loads. The principal design consideration is power-rail compatibility. The device supports low-voltage operation, but its 3.6 V rating is a maximum, not a recommendation to operate at that voltage without checking every datasheet limit. Decoupling, grounding, input common-mode range, output swing, and stability requirements must all be evaluated for the actual circuit. This page consolidates the manufacturer specifications, ordering information, package details, pricing evidence, and engineering guidance for the TLV2781ID. It also identifies where replacement decisions require additional qualification, particularly for shutdown behavior, supply tolerance, bandwidth, rail-to-rail performance, and exact pin compatibility.

RFQ İletişim
TLV2783CD - Dual 3.6V 8MHz RRIO Op Amp | Texas Instruments
TLV2783CD

TLV2783CD - Dual 3.6V 8MHz RRIO Op Amp | Texas Instruments

The Texas Instruments TLV2783CD is a dual, general-purpose operational amplifier built around the TLV2783 family, with a 3.6 V nominal supply, 8 MHz gain-bandwidth product, rail-to-rail input and output operation, shutdown capability, and a 14-pin SOIC package. The 250 uV offset-voltage specification supports precision signal conditioning when paired with suitable external calibration and feedback components. An operational amplifier is an active analog building block that amplifies the voltage difference between its inverting and non-inverting inputs. Within the broader semiconductor hierarchy, the TLV2783CD belongs to the operational-amplifier class, then to analog ICs and signal-chain semiconductors. Rail-to-rail input and output operation allows the amplifier to approach both supply rails, which is useful in compact systems where signal range and board area are constrained. The 8 MHz gain-bandwidth product provides useful bandwidth for low-frequency signal conditioning, feedback control, active filtering, and general instrumentation. Its rail-to-rail input capability supports sensing near the positive or negative supply rail, while rail-to-rail output improves dynamic range in low-voltage systems. The shutdown feature can reduce power consumption when signal-chain activity is not required, although a dedicated shutdown pin exists in this package configuration. The TLV2783 family combines two amplifiers with a common supply in a 14-pin SOIC outline. A 250 uV input offset-voltage specification and low-noise general-purpose architecture make it suitable for sensors, buffered analog channels, and signal-conditioning stages. Its dual-channel configuration reduces the number of packages needed when a design requires two related analog functions, such as filtering plus buffering. Typical applications include portable sensor interfaces, industrial instrumentation, low-voltage data-acquisition channels, audio preamplification, motor or actuator signal conditioning, and embedded control systems. The 3.6 V operating point suits compact equipment operating from low-voltage rails, while the 8 MHz bandwidth is appropriate for signals that do not require high-definition audio or wideband communications performance. When laying out the circuit, keep feedback components and sensitive input nodes compact, provide normal bypassing at the supply pins, and account for output drive when driving capacitive loads. The shutdown state should be checked against downstream power-sequencing requirements, because forcing the output into a high-impedance state can influence the behavior of the surrounding circuit. This page combines the TLV2783CD's core electrical characteristics with same-family drop-in options, package-aware comparisons, and practical guidance for low-voltage analog design. It is intended to accelerate component selection while keeping the distinction between confirmed device ratings and application-specific design assumptions clear.

RFQ İletişim