TLV2771ID - 5.1 MHz, 10.5 V/us Rail-to-Rail Op Amp | TI
MPN: TLV2771ID ✓ AktifTLV2771ID Genel Bakış
An operational amplifier is an analog integrated circuit that amplifies the voltage difference between its inverting and non-inverting inputs. The TLV2771 belongs to the CMOS operational-amplifier hierarchy, where low supply voltage, low power consumption, and moderate-to-high bandwidth support portable, industrial, communications, and sensor-interface applications. Its rail-to-rail output lets the output approach the supply rails more closely than a conventional fixed-output amplifier.
Three defining performance characteristics are the 5.1 MHz gain-bandwidth product, 10.5 V/us slew rate, and approximately 1 mA supply current per channel. The bandwidth supports higher-frequency closed-loop designs, while the slew rate determines how quickly the output can move through signal transitions. The single-amplifier configuration also reduces board area and power consumption compared with using a dual or quad package when only one amplifier is required.
The TLV2771 family combines high slew rate and bandwidth with rail-to-rail output swing and high output drive. These characteristics make the device useful in active filters, signal buffers, level translators, transducers, and low-voltage analog front ends. Its CMOS implementation is particularly appropriate when low quiescent power and operation from a compact supply are more important than the very lowest input offset voltage available from precision bipolar amplifiers.
Typical uses include sensor signal conditioning, communications-channel interfaces, audio and control-signal paths, industrial acquisition modules, and portable instrumentation. The 5.1 MHz bandwidth provides useful margin for moderate-frequency active filtering, while the 10.5 V/us slew rate improves large-signal response compared with slower general-purpose CMOS amplifiers. The 8-SOIC package supports conventional surface-mount assembly and thermal copper patterns.
When designing around the TLV2771ID, account for output-swing limits under load, input common-mode range, capacitive-load stability, and shutdown-pin logic. Place bypass capacitance close to the supply pins, preserve the manufacturer-recommended feedback topology, and verify settling time at the intended closed-loop gain. These checks are especially important when driving ADC front ends, long interconnects, or capacitive sensor outputs.
This product record combines the device's principal electrical characteristics, package and thermal details, pin-location guidance, application-specific design guidance, and same-footprint alternatives. It also highlights practical selection trade-offs involving shutdown operation, bandwidth, slew rate, supply current, and input precision so engineers can determine whether the TLV2771ID matches both the electrical and mechanical requirements of a new design.
Drop-in alternatifler için TLV2771ID — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
Bu Serideki Variantlar
Yedek parça uyumlu olan aynı serideki modeller TLV2771ID (aynı form faktörü ve ayağa oturma) — farklı olan Package, Slew Rate, Gain-Bandwidth Product, Maximum Supply Voltage, Product Type.
TLV2771CD
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →TLV272IDR
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
TLV271IDR
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →TLV2771ID Maksimum Değerlendirmeler & Elektriksel Özellikler
| Amplifier Type | Single operational amplifier |
| Number of Channels | 1 circuit |
| Technology | CMOS operational amplifier |
| Maximum Supply Voltage | 5.5 V |
| Minimum Supply Voltage | 2.7 V |
| Gain-Bandwidth Product | 5.1 MHz |
| Slew Rate | 10.5 V/us |
| Supply Current Per Channel | 1 mA |
| Çıkış Türü | Rail-to-rail output |
| Shutdown Function | Present |
| İşletim Sıcaklığı Aralığı | -40 C to +125 C |
| Paket | 8-SOIC |
| Montaj Türü | Surface mount |
| Product Status | Active |
TLV2771ID 8-soic Pin Yapısı Kılavuzu
TLV2771ID (8-soic paket) için pin yapısı. Bu analog bileşen, giriş, çıkış ve güç besleme pinleri içerir. Ofset null, telafi ve etkinleştirme pin yapılandırmaları için üretici veri kitapçığını referans alın. Sinyal işleme ve güç amplifikasyon devreleri için mükemmel bir bileşendir.
Ayrıntılı pin çıkış verisi mevcut değil: TLV2771ID.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
TLV2771ID için uygundur 6 uygulamas: Low-Voltage Sensor Signal Conditioning, Communications Signal Interface, Active Filtering and Control Loops, Portable Measurement and Monitoring, Audio and Low-Level Analog Paths, ADC and Digital Interface Buffering.
Low-Voltage Sensor Signal Conditioning
The TLV2771ID fits low-voltage sensor front ends that require a compact amplifier with more bandwidth than a slow precision-oriented device. Its 5.1 MHz gain-bandwidth product supports moderate-frequency closed-loop operation, while the 10.5 V/us slew rate allows the output to follow faster input transitions. With approximately 1 mA supply current per channel and operation from 2.7 V, it can buffer resistive, current-output, or low-level sensing elements without creating a large supply-demand burden. Place the amplifier in a conventional noninverting or inverting configuration, and verify that the sensor output remains inside the input common-mode range. The complete signal path should also be checked for sensor noise, offset drift, filter stability, and settling before conversion by an ADC.
Önerilen
Communications Signal Interface
The TLV2771ID is appropriate for communications and industrial interface stages that need higher slew rate than a general-purpose low-power amplifier. Its 10.5 V/us slew rate helps preserve large-signal transitions, and the 5.1 MHz gain-bandwidth product provides margin for modest filtering and buffering functions. The approximately 1 mA operating current per channel is useful in distributed or portable interface equipment. Use the amplifier to condition logic-level signals, bridge sensor outputs, or buffer a communications transceiver where the signal remains within the common-mode range. Validate attenuation, logic-level thresholds, channel bandwidth, crosstalk, output loading, and shutdown timing for the actual communication protocol. A powered-down input state must also meet the receiver’s requirement for a valid inactive level.
Önerilen
Active Filtering and Control Loops
The TLV2771ID can implement active filters and servo-style control loops that benefit from its 5.1 MHz gain-bandwidth product and 10.5 V/us slew rate. These characteristics provide useful speed margin in second-order filters, error amplifiers, and waveform-shaping stages while keeping operating current near 1 mA per channel. The amplifier should be compensated according to the selected noise gain and load, particularly when driving ADC inputs, long cables, or capacitive loads. Evaluate phase margin, closed-loop gain, output swing, and expected component tolerances before production. For filters with stringent amplitude or phase accuracy, include amplifier offset, bias-current effects, and temperature drift in the error budget rather than relying only on nominal bandwidth and slew-rate figures.
Önerilen
Portable Measurement and Monitoring
The TLV2771ID suits portable measurement modules where a 2.7 V minimum supply and approximately 1 mA supply current are valuable, but the signal path still needs faster dynamics than an ultra-low-power amplifier provides. Its 5.1 MHz gain-bandwidth product can support precision-input buffering, threshold detection, and active gain stages, while the 10.5 V/us slew rate improves response to transients. Use suitable input protection and filtering because sensor leads can introduce ESD, motor noise, and capacitive loading. Confirm the amplifier’s common-mode range, output swing, and shutdown behavior across the full battery-voltage range. Low supply current alone does not establish total system power, so include quiescent current, load current, and shutdown leakage in the portable power budget.
Önerilen
Audio and Low-Level Analog Paths
The TLV2771ID can serve as a general-purpose amplifier in low-level audio or control paths where rail-to-rail output and fast transient response are important. The 10.5 V/us slew rate helps reduce slew-related distortion on changing waveforms, and the 5.1 MHz gain-bandwidth product provides more bandwidth than typical low-power audio stages. Its approximately 1 mA operating current supports compact analog sections, although the circuit must remain inside the amplifier’s specified input and output ranges. Establish the required gain, minimum signal level, output loading, and total harmonic distortion before selecting the device. In battery-powered audio equipment, shutdown control can reduce consumption during inactive intervals, but the shutdown input state and timing must be checked to prevent clicks or unwanted signal transients.
Önerilen
ADC and Digital Interface Buffering
The TLV2771ID is useful as an ADC input buffer or digital-interface conditioning stage when the required bandwidth is moderate and operating current must remain low. Its 5.1 MHz gain-bandwidth product supports unity-gain or low-gain buffering, and the 10.5 V/us slew rate permits larger input transitions than a slow comparator-style amplifier. The rail-to-rail output helps preserve logic levels near the supply limits, subject to the actual output-swing specification and load current. Place the device close to the ADC or source to minimize trace pickup and add suitable bypass capacitance near the supply pins. Verify settling against the converter’s acquisition window, capacitive loading, kickback from the ADC, and shutdown timing so the output does not move unpredictably while the converter is sampling.
Önerilen
Önerilen Ürünler Özeti
Mühendislik referans verileri: TLV2771ID — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün | TLV2771CD | TLV272IDR | TLV271IDR |
|---|---|---|---|---|
| Package | 8-SOIC | 8-SOIC - same | 8-SOIC - same | 8-SOIC - same |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Amplifier Configuration | Single amplifier | Single amplifier | Single amplifier | Single amplifier |
Ana Farklılayıcılar
- Combines high dynamic performance with low operating current (karşılaştırma:TLV272IDR)
- Single-amplifier 8-SOIC implementation reduces board space (karşılaştırma:TLV2771CD)
- Supports low-voltage operation with rail-to-rail output (karşılaştırma:TLV271IDR)
Tasarım Notları
Use the 5.1 MHz gain-bandwidth product to select a closed-loop gain that leaves adequate bandwidth margin for the signal of interest. The 10.5 V/us slew rate is the maximum large-signal transition capability, so confirm that the required output amplitude, frequency, and load do not create slew-rate distortion. For an ADC interface, include amplifier settling time and the converter’s acquisition window in the overall timing budget, then include an isolation resistor if capacitive kickback or capacitive loading could affect stability.
Place the supply bypass capacitor close to the positive supply and ground pins, and return its ground end through the shortest practical path on the PCB. The normal operating current is approximately 1 mA per channel, but total system demand also includes output current and leakage while shut down. Confirm that the shutdown logic is compatible with the external circuit and that the powered-down output cannot create an invalid level at the load. Do not infer input behavior during shutdown without checking the manufacturer guidance.
Do not assume that rail-to-rail output means the output can reach exactly the supply rails under every load. Check output-swing conditions, load current, input common-mode range, and supply headroom at the intended operating point. Also verify that an alternative amplifier uses the same 8-SOIC pin functions and shutdown polarity; a shared footprint does not by itself make biasing, logic levels, offset, bias current, or dynamic performance interchangeable.
Uyumluluk Bilgisi
Compliance status must be confirmed from the Texas Instruments product documentation for the exact orderable MPN and manufacturing origin. No definitive compliance claim is made for TLV2771ID.