Microchip Technology

LAN9500AI-ABZJ-TR USB 2.0 Ethernet Controller | Microchip

MPN: LAN9500AI-ABZJ-TR ✓ Aktif
3.3 V Vdss 56-pin QFN with exposed pad Package
MOQ: 1 |

LAN9500AI-ABZJ-TR Genel Bakış

The Microchip Technology LAN9500AI-ABZJ-TR is a single-chip Hi-Speed USB 2.0 to 10/100 Ethernet controller with an integrated USB interface, Ethernet MAC, and 10/100 Base-T/TX PHY in a 56-pin QFN package measuring 8 mm by 8 mm. It supports USB 2.0 data rates up to 480 Mbps and 10 Mbps or 100 Mbps Ethernet operation, with Auto-MDIX and auto-negotiation support for flexible network connections.

A USB-to-Ethernet controller is an interface IC that bridges a USB host connection and an Ethernet network. It combines protocol conversion, media-access control, and physical-layer signaling in one device, reducing the component count required for USB-to-10/100-Ethernet equipment. Within the interface-controller hierarchy, the LAN9500AI belongs to the USB interface and Ethernet controller family and operates as a bridge between a USB 2.0 host and an IEEE 802.3 network.

The device provides Control, Interrupt, Bulk-in, and Bulk-out USB endpoints through its internal USB 2.0 device controller and PHY. Its Ethernet side supports auto-negotiation, auto-polarity correction, and HP Auto-MDIX. These features allow the controller to connect through straight-through or crossover cabling while negotiating 10 Mbps or 100 Mbps operation without fixed DIP-switch configuration.

The LAN9500A family is positioned as a cost-competitive connectivity solution for USB-to-Ethernet products. Because the controller integrates both the Ethernet MAC and PHY, a compact design still requires external magnetics, passives, clocking or crystal components, and carefully arranged high-speed signal paths. The 56-lead QFN form factor is intended for surface-mount assembly and demands a controlled land pattern and thermal-pad layout.

Typical uses include industrial USB gateways, test equipment, set-top and media systems, USB-to-Ethernet adapters, printer interfaces, embedded data acquisition systems, and portable communication equipment. In these systems, the LAN9500AI-ABZJ-TR provides a direct digital interface between a USB host and a 10/100 Ethernet network while adding automatic speed and cable handling.

PCB implementation should follow Microchip's LAN950x layout guidance. Keep the USB differential pair and Ethernet magnetic-device interface paths short, match the differential pair geometry, place decoupling close to the supply pins, and provide clean grounding around the PHY. Review the required EXRES resistor and supporting component values against the specific LAN9500A or LAN9500Ai variant before production release.

This product page consolidates the manufacturer family information, package details, interface characteristics, qualified replacement discussion, and application guidance into a practical engineering reference for USB-to-Ethernet product design.

Drop-in alternatifler için LAN9500AI-ABZJ-TR — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

Bu Serideki Variantlar

Yedek parça uyumlu olan aynı serideki modeller LAN9500AI-ABZJ-TR (aynı form faktörü ve ayağa oturma) — farklı olan RoHS Status, Package, USB Interface, Ethernet Speed, Ethernet Standards.

Microchip Technology
RoHS Status: Compliant (lead-free)
Package: 56-pin QFN (8x8 mm) with EP, lead-free RoHS
Ethernet Speed: 10/100 Mbps (auto-negotiation)
İle Karşılaştır LAN9500AI-ABZJ-TR →
Microchip Technology
RoHS Status: RoHS compliant
USB Interface: Hi-Speed USB 2.0
İle Karşılaştır LAN9500AI-ABZJ-TR →
Microchip Technology
Package: 56-pin QFN exposed pad, 8 mm x 8 mm
USB Interface: USB 2.0
Ethernet Speed: 10 Mbps and 100 Mbps
İle Karşılaştır LAN9500AI-ABZJ-TR →

LAN9500I-ABZJ-TR

✅ Yerleştirme
Microchip Technology
📦 56-pin QFN (8 mm x 8 mm)
USB 2.0 to 10/100 Ethernet controller · Hi-Speed USB 2.0 · 10/100 Mb/s · Integrated 10/100 Base-T/TX PHY · USB device controller, 10/100 Ethernet MAC, and Ethernet PHY · 56-pin QFN, 8 x 8 mm · Surface mount · -40°C to +85°C

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

LAN9500A-ABZJ-TR

✅ Yerleştirme
Microchip Technology
📦 56-pin QFN (8 mm x 8 mm)
USB 2.0 to 10/100 Ethernet Bridge Controller · USB 2.0 Hi-Speed (480 Mbps) · IEEE 802.3 / IEEE 802.3u (10Base-T / 100Base-TX) · 10/100 Mbps (auto-negotiation) · Yes (HP Auto-MDIX) · Control, Interrupt, Bulk-in, Bulk-out · MII (for external PHY) · 1.2 V, 2.5 V, 3.3 V (multiple rails)

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

LAN9730-ABZJ-TR

✅ Yerleştirme
Microchip Technology
📦 56-pin QFN
USB 2.0 to 10/100 Ethernet controller · USB 2.0 · High-Speed Inter-Chip (HSIC) · 10 Mbps and 100 Mbps · IEEE 802.3 and IEEE 802.3u · Integrated 10BASE-T and 100BASE-TX PHY · 1.2 V and 3.3 V · 3.63 V

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

LAN9730I-ABZJ

✅ Yerleştirme
📦 56-pin QFN
Provides the same 56-QFN USB-to-10/100 controller class with a single 3.3 V supply approach, requiring comparison of external components and board conditions against LAN9500Ai.

📋 Katalogda Olmayan Referans Alternatifi

LAN9500AI-ABZJ-TR Özellikler

Product Type USB 2.0 to 10/100 Ethernet controller
USB Interface USB 2.0 Hi-Speed
Maximum USB Data Rate 480 Mbps
Ethernet Data Rates 10 Mbps and 100 Mbps
Ethernet Physical Layer Integrated 10/100 Base-T/TX PHY
Ethernet Interface IEEE 802.3 and IEEE 802.3u compliant
Cable Handling HP Auto-MDIX
Negotiation Auto-negotiation
Polarity Handling Auto-polarity correction
USB Endpoints Control, Interrupt, Bulk-in, and Bulk-out
External MII Support Available
Besleme Gerilimi 3.3 V
Paket 56-pin QFN with exposed pad
Package Dimensions 8 mm x 8 mm
Montaj Türü Surface mount
Packaging Tape and reel
Lead-Free Status Lead-free
RoHS Durumu Compliant

LAN9500AI-ABZJ-TR 8 mm x 8 mm Pin Yapısı Kılavuzu

LAN9500AI-ABZJ-TR (8 mm x 8 mm paket) için pin yapısı. Pin numaralandırma, işlevleri ve bağlantı şemaları üretici veri kitapçığında tanımlanmıştır. Doğru ayak ve soldurma kılavuzları için onu referans alın.

8 mm x 8 mm paket pin çizelgesi için LAN9500AI-ABZJ-TR

Ayrıntılı pin çıkış verisi mevcut değil: LAN9500AI-ABZJ-TR.

Aşağıdaki veri sayfası tam pin konfigürasyonu için.

Tipik Uygulamalar

LAN9500AI-ABZJ-TR için uygundur 6 uygulamas: Industrial USB-to-Ethernet Gateways, USB Network Test Equipment, Printers and Media Peripherals, Embedded Data Acquisition Systems, Portable Communication Equipment, Set-Top and Media Systems.

🏭

Industrial USB-to-Ethernet Gateways

The LAN9500AI-ABZJ-TR fits industrial gateway designs that must expose an Ethernet interface through a USB host connection. Its integrated USB 2.0 controller, Ethernet MAC, and 10/100 PHY provide a 480 Mbps USB path and 10 Mbps or 100 Mbps network operation without requiring separate MAC and PHY devices. Auto-negotiation, auto-polarity correction, and HP Auto-MDIX simplify connection to industrial equipment with varying network speeds and cable arrangements. The 56-QFN 8 mm by 8 mm package also supports compact controller sections, although the exposed-pad land pattern, magnetic-device isolation, and low-noise layout remain essential.

🔧

USB Network Test Equipment

The LAN9500AI-ABZJ-TR is appropriate for USB-based test and measurement equipment that needs a standard 10/100 Ethernet connection to a host. The integrated MAC and PHY reduce the interface complexity of the instrument while allowing USB 2.0 operation at rates up to 480 Mbps. HP Auto-MDIX removes the need for users to distinguish crossover and straight-through leads, while auto-negotiation allows the equipment to connect to either 10 Mbps or 100 Mbps network ports. For reliable measurements, place the PHY and magnetics section away from high-current switching nodes and follow Microchip's LAN950x differential-pair and grounding guidance.

📺

Printers and Media Peripherals

The LAN9500AI-ABZJ-TR can connect a USB-enabled printer, media appliance, or set-top accessory to a 10/100 Ethernet network. Its single-chip integration of USB, Ethernet MAC, and PHY minimizes board area around the network interface, and HP Auto-MDIX improves compatibility with varied installation cabling. Auto-negotiation supports both 10 Mbps and 100 Mbps network environments, which is useful for legacy equipment. The controller's 56-QFN package requires a thermal-pad-aware footprint, and the Ethernet magnetics must be placed close to the network connector according to the manufacturer layout guidelines.

🖥️

Embedded Data Acquisition Systems

The LAN9500AI-ABZJ-TR is well suited to embedded acquisition systems that collect data on a USB-connected host and transfer it through Ethernet. The USB controller supports Control, Interrupt, Bulk-in, and Bulk-out endpoints, while the integrated 10/100 PHY provides a direct network interface with automatic speed selection. This combination allows a compact instrument to bridge local USB connectivity and an external Ethernet segment without a separate network controller. System designers should isolate the Ethernet magnetics, preserve differential-impedance control on USB and Ethernet routes, and verify the external component values required by the selected LAN9500Ai ordering code.

📱

Portable Communication Equipment

The LAN9500AI-ABZJ-TR can add wired Ethernet connectivity to portable or networked accessories built around a USB host interface. Its 480 Mbps Hi-Speed USB interface and 10/100 Ethernet support cover common control, monitoring, and data-transfer workloads while automatic cable and speed handling reduce configuration effort. The compact 56-QFN package helps preserve board area in portable equipment, but enclosure heat, connector grounding, and cable transient exposure must be considered. A robust implementation should follow the manufacturer layout guidance for the USB differential pair, PHY supply filtering, Ethernet magnetic device, and exposed thermal pad.

🎥

Set-Top and Media Systems

The LAN9500AI-ABZJ-TR supports set-top boxes, media players, and conferencing endpoints that require Ethernet networking without allocating a large controller area. Integrating USB 2.0, the Ethernet MAC, and the 10/100 PHY provides a concise connectivity solution, while 10 Mbps and 100 Mbps auto-negotiation accommodates different home and enterprise network ports. HP Auto-MDIX improves installation flexibility, especially when users may connect through different cable arrangements. The design must still provide the manufacturer's required Ethernet magnetics, decoupling, clock components, and EXRES implementation while maintaining controlled spacing between the network interface and noisy system circuitry.

What is the LAN9500AI-ABZJ-TR?
The LAN9500AI-ABZJ-TR is a Microchip Technology single-chip USB 2.0 to 10/100 Ethernet controller with an integrated Ethernet MAC and 10/100 Base-T/TX PHY. According to the Microchip LAN950x databook, it supports USB data rates up to 480 Mbps, Ethernet rates of 10 Mbps and 100 Mbps, and a 56-pin 8 mm by 8 mm QFN package.
What are the key specifications of LAN9500AI-ABZJ-TR that engineers should know?
The LAN9500AI-ABZJ-TR combines a Hi-Speed USB 2.0 device controller, Ethernet MAC, and 10/100 PHY in one 56-QFN package. The Microchip LAN950x databook identifies support for 480 Mbps USB, 10 Mbps and 100 Mbps Ethernet, auto-negotiation, auto-polarity correction, HP Auto-MDIX, and Control, Interrupt, Bulk-in, and Bulk-out USB endpoints.
Is LAN9500AI-ABZJ-TR suitable for USB-to-Ethernet adapters?
Yes, the LAN9500AI-ABZJ-TR is suitable for compact USB-to-Ethernet adapters because it integrates the USB 2.0 interface, Ethernet MAC, and 10/100 PHY. The Microchip LAN950x databook confirms 480 Mbps USB operation, 10/100 Ethernet support, and HP Auto-MDIX, which allows automatic connection to either straight-through or crossover cabling.
Where can I download the LAN9500AI-ABZJ-TR datasheet PDF?
The LAN9500AI-ABZJ-TR datasheet PDF is available from Microchip Technology through the official LAN950x databook at the 9500db.pdf link on microchip.com. That document contains the USB 2.0 interface, Ethernet MAC and PHY characteristics, electrical specifications, package details, and pin descriptions for the LAN9500 and LAN9500A families.
Where can I find the LAN9500AI-ABZJ-TR pinout?
The LAN9500AI-ABZJ-TR pinout is documented in the pin-configuration section of the Microchip LAN950x databook. The component uses a 56-pin QFN package with an exposed pad, so PCB designers should use the package drawing and land pattern together with the electrical requirements when assigning nets.
What can replace the LAN9500AI-ABZJ-TR?
The closest documented drop-in candidates are the LAN9500I-ABZJ-TR, LAN9500A-ABZJ-TR, LAN9730-ABZJ-TR, and LAN9730I-ABZJ family devices, all associated with 56-pin USB-to-Ethernet controller implementations. Microchip notes that LAN9500 and LAN9500A-family variants are pin compatible, but required EXRES resistor and other system-component values can differ, so the exact variant must be checked against its datasheet.
Is the LAN9500AI-ABZJ-TR the same as the LAN9500A-ABZJ-TR?
The LAN9500AI-ABZJ-TR and LAN9500A-ABZJ-TR belong to the same Microchip LAN9500A controller family and use the same 56-pin QFN format. Microchip's family databook states that LAN9500 and LAN9500A devices are pin compatible, although required EXRES resistor and other external component values differ; the ordering suffix must therefore be checked before substitution.
LAN9500AI-ABZJ-TR vs LAN9500I-ABZJ-TR — which should be selected?
The LAN9500AI-ABZJ-TR is the better-defined choice when the system is designed specifically for the LAN9500Ai family and its documented external circuitry. The LAN9500I-ABZJ-TR is also associated with a 56-pin 10/100 Ethernet controller, but Microchip's family documentation identifies differing EXRES and other component requirements, making a direct substitution dependent on schematic and bill-of-materials review.
When should I choose LAN9500AI-ABZJ-TR over LAN9730-ABZJ-TR?
Choose the LAN9500AI-ABZJ-TR when the design has been qualified around the LAN9500Ai external-component and layout requirements and requires its integrated 10/100 MAC/PHY architecture. The LAN9730-ABZJ-TR is documented as a 56-QFN USB-to-10/100 controller alternative, but its single 3.3 V supply arrangement differs from the multi-supply LAN9500A family discussion, so it is not a drop-in choice without schematic verification.
Where to buy LAN9500AI-ABZJ-TR online?
Use the Request a Quote form on this page to request LAN9500AI-ABZJ-TR sourcing, current commercial terms, and traceability requirements. The exact MPN is a 56-QFN, tape-and-reel USB 2.0 to 10/100 Ethernet controller, so buyers should specify the complete ordering code and verify any requested temperature, packing, and quality requirements before placing an order.
What is the price of LAN9500AI-ABZJ-TR?
Current commercial pricing for the LAN9500AI-ABZJ-TR is handled through the Request a Quote form on this page. The request should identify the exact 56-QFN tape-and-reel MPN and any required quantity, delivery schedule, traceability, or authorized sourcing conditions so the quotation reflects the intended procurement package.
What is the lead time for LAN9500AI-ABZJ-TR?
The current lead time for the LAN9500AI-ABZJ-TR should be confirmed through the Request a Quote form on this page. Lead time can depend on the requested quantity, manufacturing status, packaging format, quality documentation, and shipment destination, so engineers should obtain a schedule for the complete ordering code before committing the production schedule.
Is LAN9500AI-ABZJ-TR in stock?
Use the Request a Quote form on this page for current LAN9500AI-ABZJ-TR stock and allocation status. The exact device is a 56-QFN tape-and-reel component, and the response should state the available quantity, earliest delivery date, and any minimum-order or traceability conditions.
How much power does the LAN9500AI-ABZJ-TR dissipate?
The LAN9500AI-ABZJ-TR dissipation depends on the selected supply rails, USB activity, Ethernet traffic, and ambient temperature, so a single fixed dissipation value is not appropriate without the operating profile. Use the supply-current limits and thermal information in the Microchip LAN950x databook, then calculate worst-case junction temperature with the PCB thermal resistance of the actual layout.
Is the LAN9500AI-ABZJ-TR RoHS compliant?
The LAN9500AI-ABZJ-TR is identified as RoHS-compliant and lead-free in the Microchip LAN950x databook ordering information. The 56-pin QFN construction therefore conforms to the documented lead-free RoHS package designation, while other environmental declarations such as REACH, halogen-free status, and conflict-minerals policy should be confirmed for the specific procurement lot.

Mühendislik referans verileri: LAN9500AI-ABZJ-TR — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Choose the LAN9500AI-ABZJ-TR when the product architecture is built around the LAN9500Ai family and its 480 Mbps USB 2.0, integrated 10/100 MAC and PHY, HP Auto-MDIX, and documented external circuitry. Consider the LAN9500I-ABZJ-TR or LAN9500A-ABZJ-TR when an existing 56-QFN design can be reconciled with their different EXRES resistor and supporting component requirements. The LAN9730-ABZJ-TR and LAN9730I-ABZJ are relevant same-package controller alternatives, but their documented single 3.3 V supply approach differs from the multi-supply LAN9500A family arrangement. For every candidate, verify the pin names, power architecture, clock components, magnetic-device circuit, firmware expectations, and exposed-pad layout rather than relying on package identity alone.

Alternatiflerle Karşılaştırma

Parametre Bu Ürün LAN9500I-ABZJ-TR LAN9500A-ABZJ-TR LAN9730-ABZJ-TR LAN9730I-ABZJ
Package 56-pin QFN (8 mm x 8 mm) 56-pin QFN 56-pin QFN 56-pin QFN 56-pin QFN
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Function USB 2.0 to 10/100 Ethernet controller USB 2.0 to 10/100 Ethernet controller USB 2.0 to 10/100 Ethernet controller USB 2.0 to 10/100 Ethernet controller USB 2.0 to 10/100 Ethernet controller
USB Interface USB 2.0 Hi-Speed USB 2.0 Hi-Speed USB 2.0 Hi-Speed USB 2.0 Hi-Speed USB 2.0 Hi-Speed
Ethernet Data Rates 10 Mbps and 100 Mbps 10 Mbps and 100 Mbps 10 Mbps and 100 Mbps 10 Mbps and 100 Mbps 10 Mbps and 100 Mbps
Supply Configuration Multi-supply LAN9500A-family implementation 3.3 V operating range identified for LAN9500I Multiple supply voltages identified for LAN9500A family Single 3.3 V supply Single 3.3 V supply
External Component Configuration LAN9500Ai-specific EXRES and supporting component values Different EXRES and supporting component values Different EXRES and supporting component values LAN9730-family-specific implementation LAN9730-family-specific implementation

Ana Farklılayıcılar

  • Single-chip USB and 10/100 Ethernet integration (karşılaştırma:KSZ8041TLI-TR)
  • Automatic cable and speed handling (karşılaştırma:LAN9730I-ABZJ)
  • USB Hi-Speed host connectivity (karşılaştırma:LAN9730-ABZJ-TR)

Tasarım Notları

Follow Microchip's LAN950x layout guidelines for the USB differential pair, Ethernet magnetic-device interface, supply connections, and exposed pad. Place input and bulk decoupling capacitors close to their associated supply pins, connect the exposed pad to the ground plane through a full package footprint, and keep the Ethernet magnetics close to the network connector. These placement decisions reduce trace inductance, ground-plane disruption, and signal-integrity degradation.

Do not treat every LAN9500-family ordering code as an automatic drop-in substitution. Microchip states that LAN9500 and LAN9500A devices are pin compatible but that the required EXRES resistor and other system components differ. Compare the exact schematic, BOM, clock requirements, supply network, and exposed-pad connection before approving LAN9500I-ABZJ-TR, LAN9500A-ABZJ-TR, or a LAN9730-family alternative.

Maintain continuous reference planes beneath USB and Ethernet differential routes and avoid placing those routes over split power or ground planes. Respect the USB differential impedance target defined by the board design, minimize stub branches, and avoid routing Ethernet and USB pairs beneath or between switching-regulator power loops. Keep noisy clocks and switching nodes away from the PHY and magnetics section to reduce radiated emissions and susceptibility to timing errors.

Use the exposed pad as both an electrical ground connection and a heat-spreading structure. The maximum acceptable dissipation depends on the local board thermal resistance, ambient temperature, and the USB and Ethernet activity profile. Estimate junction temperature from worst-case supply power, total package dissipation, and the PCB-specific thermal path, then increase copper area or board venting if the calculated margin is insufficient.

Uyumluluk Bilgisi

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
Kadmiyumdan Arınmış
Yes
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

Microchip's LAN950x databook identifies the 56-pin QFN LAN9500 family package as lead-free and RoHS compliant. No specific REACH, halogen-free, or conflict-minerals declaration was established for the exact ordering code.

İlgili Aramalar

lan9500ai abzj tr lan9500ai abzj lan9500ai datasheet lan9500ai abzj datasheet lan9500ai schematic microchip lan9500ai smsc lan9500ai LAN9500AI-ABZJ-TR datasheet pdf LAN9500AI-ABZJ-TR pinout LAN9500AI-ABZJ-TR equivalent LAN9500AI-ABZJ-TR replacement LAN9500AI-ABZJ-TR price LAN9500AI-ABZJ-TR vs LAN9500A-ABZJ-TR LAN9500AI-ABZJ-TR USB 2.0 10/100

İlgili Bileşenler ve Terimler

Microchip Technology SMSC LAN9500AI-ABZJ-TR LAN9500AI-ABZJ LAN9500I-ABZJ-TR LAN9500A-ABZJ-TR LAN9730-ABZJ-TR LAN9730I-ABZJ USB 2.0 Hi-Speed USB Ethernet MAC 10/100 Base-T/TX PHY Ethernet controller USB interface IC HP Auto-MDIX Auto-negotiation Auto-polarity correction IEEE 802.3 IEEE 802.3u Control endpoint Interrupt endpoint Bulk-in endpoint Bulk-out endpoint QFN surface mount
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle