LFE2-6SE-6F256I - 6K LUT ECP2 FPGA, 256-BGA | Lattice
MPN: LFE2-6SE-6F256I ✓ AktifLFE2-6SE-6F256I Genel Bakış
An FPGA is a reconfigurable digital semiconductor used to implement logic, state machines, interfaces, and parallel processing functions after hardware manufacture. The ECP2 family occupies the FPGA hierarchy below application-specific programmable logic and combines programmable logic blocks, embedded block RAM, programmable I/O, and dedicated serial capabilities in one highly integrated device. This makes the LFE2-6SE-6F256I suitable for embedded control, communications, industrial automation, and signal-processing systems.
The principal resources include 6,000 logic elements, 56,320 RAM bits, and 190 user I/O, while the device is identified as a 6K LUT ECP2 FPGA with S-Ser DSP support. Its -6 ordering code denotes the speed grade shown in the product listing. The 256-BGA package provides a dense board footprint for designs requiring extensive connectivity, although ball assignments, differential I/O support, and exposed-pad requirements must be confirmed against the manufacturer pinout and package documentation before layout release.
The ECP2 architecture supports parallel programmable logic, embedded memory, and high-speed serial communication resources in a single device. Designers can use the 190 available user I/O for control signals, external memory interfaces, sensor acquisition, or industrial bus connectivity where the relevant bank voltage and interface limits permit. Logic utilization depends on the selected clocking, memory, I/O standards, and routing architecture, so a design should be fitted with the Lattice implementation tools rather than estimated solely from LUT count.
Typical applications include industrial control systems, network interface modules, video and image-processing pipelines, test equipment, industrial networking, and embedded serial bridges. The device is particularly relevant when moderate logic density and a large I/O count are more important than very high FPGA capacity. It also suits designs requiring an S-Ser DSP path for serialization, clocking, or data movement.
PCB implementation should preserve the manufacturer's ball map, power architecture, decoupling requirements, and high-speed routing rules. Validate every supply rail, I/O voltage, configuration connection, and thermal condition against the exact -6F256I ordering code. When planning a migration, distinguish speed-grade, temperature-grade, package, and density changes because a shared package name alone does not establish pin-to-pin interchangeability.
This product page combines the verified ECP2 resource and package data with same-package alternatives, comparison parameters, and design guidance. It supports early architecture selection while leaving final pin assignment, timing closure, power budgeting, and board-layout approval to the manufacturer documentation and Lattice design flow.
Drop-in alternatifler için LFE2-6SE-6F256I — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
Bu Serideki Variantlar
Yedek parça uyumlu olan aynı serideki modeller LFE2-6SE-6F256I (aynı form faktörü ve ayağa oturma) — farklı olan Device Type, Package, Speed Grade.
LFE2-6SE-6FN256I
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
LFE2-6E-6F256C
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →LFE2-6SE-7FN256C
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
LFE2-12SE-6F256
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
LFE2-6SE-6F256C
✅ Yerleştirme ⚠️ Onaylanmamış ÖzelliklerFiyat için iletişime geçin
Veri Şablonunu Görüntüle →LFE2-6SE-6F256I Maksimum Değerlendirmeler & Elektriksel Özellikler
| Device Type | ECP2 field-programmable gate array (FPGA) |
| Logic Elements | 6,000 logic elements |
| Lookup Tables | 6K LUTs |
| Embedded RAM | 56,320 RAM bits |
| User I/O Pins | 190 user I/O pins |
| Core Supply Voltage | 1.2 V |
| Speed Grade | -6 speed grade |
| Temperature Grade | Industrial grade |
| Paket | 256-BGA |
| Montaj Türü | Surface mount |
| Serial Capability | S-Ser DSP |
| Programmable Logic | 6,000 logic elements |
LFE2-6SE-6F256I 256-bga Pin Yapısı Kılavuzu
LFE2-6SE-6F256I (256-bga paket) için pin yapısı. Bu dijital IC, GPIO, iletişim arayüzleri (UART, SPI, I2C) ve güç pinleri içerir. Alternatif pin işlevleri ve yapılandırma seçenekleri için üretici veri kitapçığını referans alın. Tünel sistem tasarımı ve PCB yerleşimi için temel bir bileşendir.
Ayrıntılı pin çıkış verisi mevcut değil: LFE2-6SE-6F256I.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
LFE2-6SE-6F256I için uygundur 6 uygulamas: Industrial Control and Automation, Serial Network Interface Bridge, Test and Measurement Instrumentation, Video and Image Processing, Industrial Sensor Hub, Embedded Communication Equipment.
Industrial Control and Automation
The LFE2-6SE-6F256I fits industrial controllers that combine parallel machine logic with high-speed serial data handling. Its 6,000 logic elements can implement sequencing, state-machine, timing, and protocol-control logic, while 56,320 RAM bits provide storage for buffers, counters, and sampled data. The 190 user I/O supports discrete sensors, actuators, encoders, and external interfaces when the selected bank voltage and I/O standards permit. The industrial-grade ordering option suits equipment requiring extended environmental capability. Designers should partition real-time control and serial functions carefully, apply clock constraints early, and verify timing against the -6 speed grade in the Lattice implementation flow.
Önerilen
Serial Network Interface Bridge
The LFE2-6SE-6F256I is appropriate for protocol-conversion and network-interface modules where parallel user logic must be combined with S-Ser DSP links. The S-Ser capability can reduce the number of physical serial links needed to move data between FPGA logic, converters, and external devices. Its 6,000 logic elements accommodate framing, error detection, flow control, and state management, while the 56,320 RAM bits support packet buffering. Pin assignment must account for the correct I/O bank and voltage for every high-speed lane. Signal-integrity validation, source-synchronous timing, and the -6 speed-grade timing report are essential before hardware release.
Önerilen
Test and Measurement Instrumentation
The LFE2-6SE-6F256I can implement programmable logic, acquisition control, pattern generation, and communication functions in modular test equipment. Its 6,000 logic elements support control state machines and digital algorithms, while the 190 user I/O offer broad connectivity to stimulus, response, and instrument-bus circuits. The 1.2 V core supply suits modern low-voltage digital implementations, and the industrial ordering code addresses equipment operating outside consumer-only temperature expectations. For high-accuracy analog measurements, keep sensitive front-end circuitry separate from the FPGA and use S-Ser DSP only after its clocking and interface timing have been characterized.
Önerilen
Video and Image Processing
The LFE2-6SE-6F256I can support compact image-acquisition and processing blocks when a design fits within 6,000 logic elements and 56,320 RAM bits. Programmable logic can implement pixel formatting, thresholding, color conversion, counters, and control sequencing, while S-Ser DSP provides a path for transferring data from cameras or converters. The 190 user I/O can connect parallel sensors, memories, and control signals. Designers should avoid treating the raw RAM total as unlimited frame storage and instead minimize line buffers where possible. Validate horizontal and vertical timing, lane mapping, clock-domain crossings, and video output timing in the final implementation.
Önerilen
Industrial Sensor Hub
The LFE2-6SE-6F256I fits sensor-hub designs that gather parallel digital inputs, perform local filtering or classification, and communicate results through serial links. Its 190 user I/O permits direct connection to multiple digital sensors, switches, and counters, while 6,000 logic elements can implement acquisition control and local decision logic. The 56,320 RAM bits are useful for sample buffering and transfer staging. A practical design should group compatible voltage standards into the appropriate I/O banks and preserve isolation between noisy industrial inputs and precision processing. Configuration, watchdog, and error-reporting behavior also need verification for unattended operation.
Önerilen
Embedded Communication Equipment
The LFE2-6SE-6F256I is suitable for compact communication modules that need protocol framing, buffering, routing, and control functions in one device. Its 6,000 logic elements and 56,320 RAM bits support moderate-throughput packet handling, while 190 user I/O allow connection to multiple PHY, memory, and management interfaces. S-Ser DSP can accelerate data serialization or deserialization when the relevant clocks and lane constraints are implemented correctly. For production equipment, check the exact supported I/O standards, maximum interface rates, and configuration method. Use the implementation tools for timing-driven placement, and reserve separate logic for monitoring, boot, and recovery paths.
Önerilen
Önerilen Ürünler Özeti
Mühendislik referans verileri: LFE2-6SE-6F256I — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün | LFE2-6SE-6FN256I | LFE2-6E-6F256C | LFE2-6SE-7FN256C | LFE2-12SE-6F256 | LFE2-6SE-6F256C |
|---|---|---|---|---|---|---|
| Brand | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor |
| Package | 256-BGA | 256-FBGA | 256-FBGA | 256-FBGA | 256-FBGA | 256-FBGA |
| FPGA Family | ECP2 | ECP2 | ECP2 | ECP2 | ECP2 | ECP2 |
| Speed Ordering | -6 | -6 | -6 | -7 | -6 | -6 |
Ana Farklılayıcılar
- Maintains the target ECP2 resource profile while offering a documented related ordering option (karşılaştırma:LFE2-6SE-6FN256I)
- Provides a larger same-family option when 6K LUT capacity becomes restrictive (karşılaştırma:LFE2-6E-6F256C)
- Targets the -6 speed grade with 190 user I/O for control-heavy designs (karşılaştırma:LFE2-6SE-7FN256C)
Tasarım Notları
Assign every BGA ball from the exact LFE2-6SE-6F256I package drawing rather than from a generic ECP2 diagram. Reserve all power, ground, configuration, and clock balls specified by the manufacturer, including any exposed thermal-pad connection. Place decoupling capacitance at the associated supply balls and preserve the recommended current paths. The 256-BGA footprint is too dense for last-minute pin reassignment without a complete layout and signal-integrity review.
Use manufacturer-defined constraints for every S-Ser and high-speed user I/O connection. Apply input and output timing constraints, package-delay information, and board-level loss assumptions consistently in the project. Treat the -6 ordering code as the timing target for the design. After placement and routing, inspect timing reports for unconstrained paths, high fanout nets, and clock-domain crossings before programming hardware.
Build the 1.2 V core budget from post-implementation utilization rather than a generic package-current maximum. Include core, memory, I/O, configuration, and auxiliary-supply loads, then add design margin for temperature and component tolerances. Use separate decoupling and power-distribution strategies for the core and I/O banks, and follow the manufacturer regulator-selection guidance. Verify startup current and configuration behavior as well as steady-state consumption.
Do not equate a shared 256-FBGA outline with guaranteed interchangeability. Check the ECP2 ordering table for density, speed, temperature, package, and configuration differences, and compare the complete ball map. A migration can also alter resource availability, pin-function restrictions, timing limits, and supported I/O standards. Run an unmodified synthesis and place-and-route comparison and test configuration before production approval.
Uyumluluk Bilgisi
The LFE2-6SE-6F256I is identified as industrial grade, but the verified product information does not state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status.