Ürünler (44.000+)

MAX3243EEAI+G1Z - 250kbps RS-232 Transceiver | Maxim
MAX3243EEAI+G1Z

MAX3243EEAI+G1Z - 250kbps RS-232 Transceiver | Maxim

The Maxim Integrated MAX3243EEAI+G1Z is a 3-transmitter, 5-receiver RS-232 interface transceiver operating from 3.0 V to 5.5 V, with a maximum data rate of 250 kbps in a 28-pin SSOP package. It provides automatic shutdown and wake-up, low 1 µA supply current, and enhanced electrostatic-discharge protection. An RS-232 transceiver is an interface IC that converts logic-level signals into RS-232 voltage levels and converts incoming RS-232 signals back into digital logic levels. It belongs to the serial-interface hierarchy: transceiver > RS-232 interface > communications interface > interface IC. This bidirectional signal-conditioning function allows equipment operating at different logic levels to communicate through the EIA/TIA-232 physical interface. The MAX3243EEAI+G1Z combines three driver outputs with five receiver inputs, supporting applications that need multiple receive channels and a smaller number of transmit channels. Its 3.0 V to 5.5 V supply range accommodates modern 3.3 V and 5 V digital systems. The 250 kbps maximum data rate is suitable for moderate-speed serial links, including embedded control, instrumentation, and industrial communications equipment. Automatic shutdown is a defining feature of the MAX3243E family. When no valid receiver signal is detected, the on-board power supply and drivers can shut down to reduce supply current to as little as 1 µA. Automatic wake-up reactivates the interface when valid data returns, reducing system power consumption without requiring host intervention. Enhanced ESD protection strengthens the interface against electrostatic discharge encountered during cable installation or industrial environments. According to the MAX3243EEAI data-sheet description, transmitter outputs and receiver inputs support ±15 kV air-gap discharge and ±8 kV contact-discharge protection. These ratings are relevant to external cable-facing pins and should be considered alongside normal board-layout and grounding practices. Typical uses include RS-232 links in industrial controllers, test equipment, data-acquisition systems, point-of-sale hardware, and embedded serial-port systems. The 28-pin SSOP package is compact, but its lead pitch and thermal behavior require careful PCB planning. Use the manufacturer pin-description table when assigning tracks and confirming the exposed-package or thermal details for the selected ordering code. This page combines the family-level electrical characteristics, exact package identification, sourcing guidance, application fit, and practical design considerations. It also identifies genuine same-family alternatives while making the differences between ordering variants explicit for engineering review.

RFQ İletişim
MAX3243EEAI+T - 3/5 RS-232 Transceiver, 3-5.5V | Analog Devices
MAX3243EEAI+T

MAX3243EEAI+T - 3/5 RS-232 Transceiver, 3-5.5V | Analog Devices

The Analog Devices MAX3243EEAI+T is a 3-driver, 5-receiver full-duplex RS-232 transceiver operating from 3 V to 5.5 V in a 28-pin SSOP package. It supports data rates up to 250 kbps, includes ±15 kV ESD protection, and draws approximately 1 µA when the AutoShutdown feature has disabled the on-board supply and drivers. An RS-232 transceiver is an interface integrated circuit that converts between single-ended RS-232 line signals and complementary TTL/CMOS logic levels. It belongs to the RS-232 interface transceiver class, within interface ICs and broader semiconductor communication devices. The MAX3243EEAI+T combines three RS-232 drivers and five receivers, including two always-active noninverting receiver outputs for monitoring external signals without waking the main supply section. Principal features include a single 3 V to 5.5 V supply operation, 250 kbps data-rate capability, enhanced electrostatic discharge protection on all transmitter outputs and receiver inputs, and automatic shutdown with automatic wakeup. These characteristics support portable equipment, industrial controllers, data-acquisition systems, and legacy peripheral interfaces that require a direct RS-232 connection. The MAX3243 family uses Maxim Integrated's AutoShutdown architecture to reduce supply consumption when no valid receiver activity is detected. Supply current falls to approximately 1 µA in the shutdown condition, while activity on a receiver input can reactivate the internal supply and drivers. This behavior is useful in battery-powered and intermittently connected systems where an idle RS-232 port should not continue consuming significant power. Typical uses include configuring an embedded controller for legacy printers, industrial instruments, point-of-sale equipment, and service-console connections. The three-driver arrangement supports multiple outbound RS-232 channels, while the five-receiver arrangement provides additional input and monitoring paths. Its 28-pin SSOP package also suits compact boards where connector protection and ESD resilience are important. Design with the MAX3243EEAI+T by following the manufacturer datasheet for charge-pump capacitor selection, receiver-input handling, and supply bypassing. Confirm that every connected driver output meets the intended RS-232 voltage swing and that unused inputs remain in a defined state. Protect externally accessible connectors with the device's ESD capability and route return paths away from sensitive analog or high-speed digital circuitry. This page combines manufacturer specifications, distributor availability references, family-level drop-in alternatives, and application-focused design guidance to support faster component evaluation. It also identifies the temperature-grade and package differences that must be reviewed before assigning an alternative part to an existing PCB.

RFQ İletişim
MAX3243EETI+ - 250kbps RS-232 IC | Texas Instruments
MAX3243EETI+

MAX3243EETI+ - 250kbps RS-232 IC | Texas Instruments

The Texas Instruments MAX3243EETI+ is a 3 V to 5.5 V multichannel RS-232 line driver and receiver rated for 250 kbps data rates, with ±15 kV ESD protection on its communication pins. The device is offered in a 28-terminal, no-lead square QCCN package and operates in the industrial temperature grade. A low 1 µA supply specification supports power-conscious serial-interface designs. An RS-232 transceiver is an interface IC that combines a line driver, line receiver, and charge-pump voltage conversion in one package. It translates logic-level signals from a host or embedded controller into RS-232 levels and converts received RS-232 signals back to logic levels. Within the broader hierarchy of interface ICs, a multichannel RS-232 transceiver reduces component count, board area, and external voltage-doubling circuitry in multi-port serial systems. The MAX3243EETI+ supports supply voltages from 3 V to 5.5 V, enabling operation in both 3.3 V and 5 V systems. Its 250 kbps maximum data rate suits industrial equipment, data-acquisition equipment, point-of-sale terminals, and instrument-control links. Integrated ±15 kV ESD protection helps protect the external serial interface from electrostatic discharge encountered during installation or connection to cables. The MAX3243 family provides multiple drivers and receivers for RS-232 communication. When using the charge-pump section, the required capacitor arrangement and bypass components should follow the manufacturer datasheet's recommended application circuit. The integrated converter is intended to generate the positive and negative voltages required by RS-232, while the driver and receiver sections perform level conversion and signal conditioning. Typical uses include industrial serial controllers, test equipment, security systems, medical-instrument interfaces, and point-of-sale hardware. The 250 kbps capability is suitable for links that are faster than legacy 9600-bit-per-second ports but do not require the throughput of a modern high-speed differential serial standard. Cable length and signal-integrity requirements should still be checked against the RS-232 electrical limits for the intended operating environment. Place the MAX3243EETI+ close to the connector-side transceiver circuitry, keep the charge-pump capacitor loops compact, and provide a low-impedance ground return for each interface. Confirm logic levels, timing, shutdown behavior, and unused-channel connections in the manufacturer datasheet before releasing the PCB layout. Industrial temperature-grade qualification should also be checked against the complete assembly's environmental requirements. This page consolidates the manufacturer's operating limits, package characteristics, comparison criteria, replacement guidance, and application-oriented design guidance into one engineering reference. It focuses on practical selection and integration decisions rather than repeating only the basic distributor catalog description.

RFQ İletişim
MAX3243EETI+T - 250kbps RS-232 Transceiver | Analog Devices
MAX3243EETI+T

MAX3243EETI+T - 250kbps RS-232 Transceiver | Analog Devices

Analog Devices MAX3243EETI+T is a 3-channel RS-232 line driver and receiver operating from a 3V to 5.5V supply at data rates up to 250kbps. The device provides ±15kV electrostatic-discharge protection and uses AutoShutdown to reduce supply current to 1µA when no valid receiver signal is present. It is packaged in a 28-terminal, no-lead square QFN package designated QCCN. A multi-channel RS-232 transceiver combines push-pull line drivers and receivers for bidirectional data transfer between a host and an external serial device. In the broader hierarchy, MAX3243EETI+T is an interface transceiver, an interface IC, and a semiconductor for establishing the physical signal layer required by RS-232 equipment. The AutoShutdown function is particularly useful in battery-powered instruments, portable test equipment, and systems where an inactive serial port must not continue consuming power. The 3V to 5.5V operating range permits operation from both 3.3V and 5V system rails. Its 250kbps maximum signaling rate supports data rates above the traditional 20kbps RS-232 limit while remaining suitable for instrument control, point-of-sale equipment, industrial controllers, and embedded peripheral links. ±15kV ESD protection improves tolerance of connector-borne transients, although it does not eliminate the need for correct board layout and external protection strategy. The MAX3243 family combines low-power supply design with multiple driver and receiver channels. AutoShutdown detects whether valid signal levels appear on receiver inputs and disables the internal supply and drivers when the port is idle. This behavior allows a direct interface to operate from modern low-voltage digital rails without requiring a separate power-control transistor. The exact charge-pump, driver-slew, and receiver-threshold details should be confirmed against the manufacturer datasheet before finalizing a new design. Typical uses include multichannel instrument-control links, data acquisition, barcode and point-of-sale terminals, industrial serial adapters, and embedded systems that exchange RS-232 data with legacy peripherals. The 28-terminal QFN footprint also requires careful PCB planning because its compact leadless geometry leaves less visible inspection area and demands accurate land patterns, solder-paste control, and thermal-via placement. For a robust implementation, keep the MAX3243EETI+T close to the RS-232 connector, route driver and receiver traces away from sensitive analog circuitry, and place charge-pump and interface capacitors at the pins specified by the reference design. Confirm signal polarity, receiver thresholds, shutdown behavior, and grounding with the system-level RS-232 requirements rather than assuming that every ±15V RS-232-compatible product is electrically interchangeable. This page combines manufacturer specifications, package information, practical RS-232 design guidance, and carefully qualified same-family replacement options. It is intended to help engineers determine whether the MAX3243EETI+T fits the required voltage, data rate, channel count, package, and protection level before committing the part to a PCB or production BOM.

RFQ İletişim
MAX3243EETJ+ - 250kbps RS-232 Transceiver | Analog Devices
MAX3243EETJ+

MAX3243EETJ+ - 250kbps RS-232 Transceiver | Analog Devices

The Analog Devices MAX3243EETJ+ is a 3.0V to 5.5V RS-232 transceiver with three drivers and five receivers, automatic shutdown and wakeup, enhanced electrostatic-discharge protection, and a maximum data rate of 250kbps in a 32-pin TQFN package. The interface operates across -40°C to +85°C and provides ±15kV ESD protection. An RS-232 transceiver is an interface IC that converts logic-level signals into RS-232 differential voltage levels and converts received RS-232 signals back into logic levels. The MAX3243E belongs to the broader hierarchy of interface ICs, serial transceivers, line drivers and receivers, and semiconductor communication components. Its multiple drivers and receivers allow several unidirectional or bidirectional serial links to share one compact device. Key features include three transmit outputs, five receive inputs, a 3.0V to 5.5V supply range, 1µA shutdown behavior, and automatic wakeup. The 250kbps maximum signaling rate supports data acquisition, industrial control, point-of-sale equipment, and embedded serial systems. A ±15kV ESD-rated interface helps protect equipment when connected cables are exposed to electrostatic discharge during installation or maintenance. The MAX3243E is designed for 3V-powered systems and uses automatic shutdown to reduce supply current when no valid signal is present. Automatic wakeup can return the transceiver to an operating state when incoming data resumes, reducing repeated manual enable control. Its three-driver and five-receiver arrangement provides more receive channels than the MAX3221E and MAX3223E family members, making it useful where several status or control signals must be monitored. Typical uses include industrial serial controllers, instrumentation, test and measurement equipment, security systems, and computer peripherals. In a point-of-sale terminal, the three transmitters can drive status indicators or service interfaces while the five receivers monitor keypad, sensor, and handshake signals. In an industrial controller, the device can bridge low-voltage logic and long RS-232 connections while its ESD protection reduces vulnerability to cable-borne transients. Design the circuit with the voltage ratings and external-charge-pump requirements specified in the manufacturer datasheet. Place bypass capacitors close to the supply and charge-pump nodes, route protected RS-232 lines away from sensitive clocks and data traces, and confirm that the connector and cable interface provide the intended ESD and common-mode protection. Verify signal polarity and handshake behavior in software because automatic shutdown and wakeup can affect receiver state at startup. This product page combines the manufacturer’s device specifications with practical RS-232 design guidance, compatible same-family alternatives, and a parameter-by-parameter comparison. It is intended to accelerate component selection while keeping the final engineering decision grounded in the official MAX3243E datasheet.

RFQ İletişim
MAX3243EETJ+T - 3/5 RS-232 Transceiver, 250kbps | Analog Devices
MAX3243EETJ+T

MAX3243EETJ+T - 3/5 RS-232 Transceiver, 250kbps | Analog Devices

The Analog Devices MAX3243EETJ+T is a 3.0V to 5.5V powered RS-232 interface transceiver with three transmit channels and five receive channels, supporting data rates up to 250kbps. It is packaged in a 32-pin TQFN with a 7 mm by 7 mm body and an exposed thermal pad for improved heat dissipation. The device includes automatic shutdown and wakeup functions, making it suitable for systems where the interface must remain available without continuously consuming power. An RS-232 transceiver is a signal-interface integrated circuit that converts between single-ended, bipolar RS-232 logic levels and CMOS/TTL logic levels used by microcontrollers, computers, and industrial controllers. The MAX3243E family belongs to the interface IC hierarchy: RS-232 transceiver, communications interface, and interface integrated circuit. It provides level translation, noise immunity, and electrical protection in one compact package. The MAX3243EETJ+T is specified for a 3.0V to 5.5V supply range, 15kV ESD protection on the RS-232 lines, and operation at rates up to 250kbps. Its three transmitters support point-to-point serial links, while its five receivers can monitor multiple incoming signals. Automatic shutdown reduces supply current when no active transmission is present, and the wakeup circuitry allows the interface to react to incoming serial activity. Typical uses include industrial control equipment, data acquisition systems, test and measurement instruments, service interfaces, and embedded products that communicate through legacy RS-232 ports. The exposed pad improves heat flow from the package to the PCB, but a proper thermal via and copper-pour layout remain necessary for reliable operation in elevated-temperature environments. When designing a board around this transceiver, route each RS-232 connector pin directly to the corresponding protection-capable interface pin and keep the ground return path close to the signal traces. Decoupling capacitors should be placed at the supply pins, and the exposed pad should be connected to the ground plane using multiple thermal vias. Review the manufacturer datasheet for the complete pin-description table and application circuit before assigning PCB tracks. This page combines manufacturer specifications, distributor package information, replacement analysis, and practical PCB guidance to help engineers evaluate the MAX3243EETJ+T for new RS-232 designs and for retrofit work where the original interface device is no longer readily available.

RFQ İletişim
MAX3243EEUI+ - 3/5 RS-232 Transceiver | Analog Devices
MAX3243EEUI+

MAX3243EEUI+ - 3/5 RS-232 Transceiver | Analog Devices

The Analog Devices MAX3243EEUI+ is a 3.0 V to 5.5 V RS-232 transceiver with three drivers, five receivers, 250 kbps data rate, ±15 kV ESD protection, and automatic shutdown/wakeup in a 28-pin TSSOP package. An RS-232 transceiver is an interface IC that converts logic-level digital signals into RS-232 line levels and converts incoming RS-232 signals back into CMOS-compatible logic. The MAX3243E belongs to the EIA/TIA-232 communications-interface family supporting V.28 and V.24 signaling. Its three-driver, five-receiver arrangement is particularly useful for DE-9 data-terminal-equipment connections, industrial control links, configuration ports, and service interfaces. Key features include operation from a 3.0 V to 5.5 V supply, a maximum data rate of 250 kbps, ±15 kV human-body-model ESD protection on serial-port pins, and low-power shutdown with automatic wakeup. The shutdown current is specified at 1 µA, while the always-enabled ROUT2B and INVALID outputs provide remote-ring and input-validity monitoring functions. The MAX3243E architecture supports both 3 V-powered and 5 V-powered systems. Automatic shutdown reduces supply consumption when the associated serial port is inactive, and automatic wakeup allows the interface to resume operation when valid serial activity is detected. This behavior is useful in distributed equipment where multiple RS-232 ports may remain present but unused for extended periods. Typical applications include industrial serial controllers, test and measurement instruments, point-of-sale terminals, security equipment, embedded service consoles, and legacy computer peripherals. The five receivers also provide extra input channels beyond the three transmit channels, enabling ring-indicator, remote-control, or status-signal monitoring alongside the primary serial connection. PCB design should preserve the manufacturer-recommended driver and receiver pin assignments, place the charge-pump and interface capacitors at their specified pins, and route exposed connector pins with direct ESD-current paths to ground. Check signal polarity, connector pin assignment, and logic levels before replacing an RS-232 controller with this transceiver. This page provides a focused selection guide, practical interface-layout notes, and a parameter comparison covering the MAX3243EEUI+ and its identified same-package option. Engineers can use the manufacturer datasheet and product page to confirm final pin routing, timing limits, and operating conditions before releasing a PCB.

RFQ İletişim
MAX3243EIDW - 3/5 RS-232 Transceiver | Texas Instruments
MAX3243EIDW

MAX3243EIDW - 3/5 RS-232 Transceiver | Texas Instruments

The Texas Instruments MAX3243EIDW is a 3/5 multichannel RS-232 line driver and receiver operating from a 3 V to 5.5 V supply, with data rates up to 500 kbps. It is housed in a 28-pin SOIC package and provides enhanced electrostatic-discharge protection of ±15 kV for IEC air-gap discharge and ±8 kV for contact discharge on serial-port connection pins. The device is intended for industrial, instrumentation, data-acquisition, and equipment-control interfaces requiring RS-232 compatibility with improved transient immunity. An RS-232 transceiver combines line drivers and line receivers in one interface circuit. The driver converts logic-level inputs into RS-232 bipolar levels, while the receiver converts differential, bipolar serial signals back into logic-compatible outputs. This MAX3243E device is positioned as a 3/5 transceiver for multichannel designs, allowing several RS-232 ports to share one package while reducing the number of external interface components. Key characteristics include a 500 kbps maximum signaling rate, operation across a 3 V to 5.5 V supply range, and industrial-temperature identification in the MAX3243EIDW ordering code. The E suffix denotes the enhanced ESD-protection family, making the device preferable to standard MAX3243 variants when exposed cables, connector contacts, or industrial wiring can introduce electrostatic discharge transients. The 28-pin SOIC footprint supports conventional through-hole or surface-mount assembly and is convenient for designs migrating from discrete RS-232 driver and receiver pairs. The MAX3243E is designed to meet the electrical requirements of the RS-232 standard while offering low-power operation from a single supply. The wide supply range permits use in systems with 3.3 V or 5 V logic rails, provided the interface is configured for the selected operating voltage. The transceiver architecture also allows designers to place receive and transmit functions close to a connector, reducing susceptibility to noise on long interconnects. Typical applications include industrial control consoles, serial test equipment, barcode and scanning systems, laboratory instrumentation, data-logging equipment, and RS-232 ports in embedded systems. The device is particularly useful where a cable-mounted connector can be exposed to electrostatic discharge during maintenance, plugging, or operation in electrically noisy environments. When laying out a board using the MAX3243EIDW, route each RS-232 driver and receiver connection directly to its connector and keep sensitive logic traces away from those protected connector pins. Confirm supply decoupling, grounding, and connector-return continuity in the manufacturer datasheet reference circuit. For systems requiring a different channel count or package, use the pin-configuration table and ordering information from the MAX3243E datasheet before selecting a substitute.

RFQ İletişim
MAX3243EIDWR - 3/5 RS-232 Transceiver, 500kbps | Texas Instruments
MAX3243EIDWR

MAX3243EIDWR - 3/5 RS-232 Transceiver, 500kbps | Texas Instruments

The Texas Instruments MAX3243EIDWR is a 3/5-channel RS-232 transceiver with three line drivers, five line receivers, and integrated charge-pump circuitry. It operates from a 3 V to 5.5 V supply, supports data rates up to 500 kbps, and is specified for industrial temperatures from -40 °C to +85 °C. The device is packaged in a 28-pin SOIC (DW) package. An RS-232 transceiver is the interface class that converts between digital logic levels and the differential voltage levels used by RS-232 serial links. The MAX3243EIDWR combines transmit and receive functions in one package, allowing a compact asynchronous serial-port interface. Its integrated dual charge pump generates the positive and negative voltage levels required by RS-232 drivers without requiring external negative-supply components. The principal protection feature is ±15 kV IEC ESD protection on the serial-port connection pins. The manufacturer specifies protection for HBM and IEC 61000-4-2 air-gap discharge, with ±8 kV contact-discharge protection. This makes the interface suitable for equipment exposed to electrostatic discharge at connector entry points. The device is designed to meet TIA/EIA-232-F requirements. The MAX3243EIDWR is appropriate for industrial control equipment, data acquisition systems, service interfaces, and embedded serial-port designs. Its 500 kbps capability supports communication with legacy peripherals and higher-speed control equipment while the 3 V to 5.5 V supply range allows use in both 3.3 V and 5 V systems. The three drivers and five receivers provide flexibility for multi-channel serial links. Designers should follow the manufacturer pin-description table and typical application circuit when assigning connector signals. Place charge-pump capacitors and supply bypass capacitors close to their specified pins, keep the protected serial traces away from sensitive analog circuitry, and provide adequate ESD-return paths through the connector and chassis. The 28-pin SOIC footprint allows straightforward use in conventional surface-mount PCB layouts. This page consolidates the manufacturer specifications, package information, interface guidance, and practical replacement considerations for engineers evaluating the MAX3243EIDWR in a 3 V to 5.5 V RS-232 design.

RFQ İletişim
MAX3243EIPW - 500kbps 3/5 RS-232 Transceiver | Texas Instruments
MAX3243EIPW

MAX3243EIPW - 500kbps 3/5 RS-232 Transceiver | Texas Instruments

The Texas Instruments MAX3243EIPW is a 3-to-5.5 V multichannel RS-232 line driver and receiver supporting a maximum data rate of 500 kbps. It integrates three drivers and five receivers in a 28-pin TSSOP (PW) package, and its transceiver outputs provide plus or minus 15 kV IEC electrostatic-discharge protection. An RS-232 transceiver is an interface IC that converts logic-level signals into RS-232 line levels and converts received line-level signals back into CMOS-compatible logic. In the broader electronics hierarchy, the MAX3243EIPW belongs to the interface-controller family, supports the EIA/TIA-232 communications standard, and provides the physical-layer signaling required between computers, industrial controllers, instrumentation, and other serial equipment. The device combines three driver channels and five receiver channels in one package. Its 3-to-5.5 V supply range allows operation from both 3.3 V and 5 V systems, while the 500 kbps maximum data rate supports moderate-speed point-to-point serial links. Automatic shutdown and wake-up functions can reduce supply demand when the associated receiver is inactive, and plus or minus 15 kV IEC ESD protection improves robustness on cables exposed to electrostatic discharge. The MAX3243EIPW is a pin-compatible member of the MAX3243E interface family, and the TRS3243E designation provides a second-source ordering path for the same device. Its 28-pin TSSOP package is substantially smaller than the older 28-pin DIP representation and supports compact PCB construction. The industrial temperature grade covers minus 40°C to plus 85°C operation, making the device suitable for factory equipment, data acquisition systems, service interfaces, and embedded serial ports. Typical applications include industrial control consoles, laboratory test equipment, point-of-sale terminals, security systems, external data-loggers, and embedded UART links. The three transmitters allow multiple outputs, while the five receivers support several incoming serial ports or multiple receive-connected inputs. The 500 kbps rate is appropriate for configuration transfers, status polling, command exchange, and short-distance industrial communication rather than continuous high-volume file transfers. For layout, keep the IC close to the protected connector and route each RS-232 trace as a short, direct channel. Follow the manufacturer datasheet for charge-pump capacitors, driver output connections, receiver inputs, and the exact supply-bypass arrangement. Confirm signal polarity and receiver input states before enabling a channel, especially when replacing a legacy MAX3243 implementation. This page combines the manufacturer specifications with practical transceiver application guidance, channel-count comparisons, package compatibility analysis, and design notes. These resources help engineers evaluate the MAX3243EIPW for both new RS-232 designs and existing 28-pin TSSOP board revisions.

RFQ İletişim
MAX3243EIPWG4 - RS-232 Transceiver | Texas Instruments
MAX3243EIPWG4

MAX3243EIPWG4 - RS-232 Transceiver | Texas Instruments

Texas Instruments MAX3243EIPWG4 is a four-channel RS-232 line driver and receiver with 3 V to 5.5 V supply operation, 250 kbps data signaling, and ±15 kV IEC ESD protection. The device is packaged in a 28-pin TSSOP and operates from -40°C to +85°C. An RS-232 transceiver is an interface IC that combines a line driver, which converts logic-level signals into RS-232 voltage levels, with a receiver, which converts incoming RS-232 signals back into logic-compatible levels. It belongs to the communication-interface hierarchy: transceiver → RS-232 interface IC → interface IC → integrated circuit. This integration reduces the component count and board area required for multiport serial connections. The MAX3243EIPWG4 provides four driver and four receiver channels, allowing two complete bidirectional RS-232 ports to be implemented with one package. Its 3 V to 5.5 V operating range supports both 3.3 V and 5 V system rails. The 250 kbps maximum data rate is suitable for legacy serial ports, industrial equipment, data-acquisition systems, and embedded control links. The MAX3243E designation adds enhanced electrostatic-discharge protection to the serial connections. The manufacturer describes ±15 kV IEC ESD protection, while component data also identifies ±15 kV HBM and air-gap discharge protection and ±8 kV IEC61000-4-2 contact-discharge protection. These ratings strengthen the external serial interface against electrostatic events encountered during connection, servicing, and industrial operation. Typical uses include industrial serial controllers, test and measurement equipment, point-of-sale terminals, security equipment, and embedded systems that retain an RS-232 port. The device is also useful when legacy peripherals must coexist with modern low-voltage logic because its receive and transmit functions operate from the same 3 V to 5.5 V supply range. Designers should preserve the recommended charge-pump capacitor and interface-decoupling networks, route protected connector pins directly to the device, and maintain an unobstructed return path for RS-232 signals. Because the exact MPN is listed as obsolete, new production designs should first confirm lifecycle requirements and compare the current MAX3243 family ordering options. This product page combines the manufacturer specifications, interface-protection ratings, package information, lifecycle status, and verified replacement context into a design-focused reference. It also highlights where a same-package substitute may require review of ESD ratings, temperature coverage, or ordering qualification.

RFQ İletişim
MAX3243EIPWR - 500kbps 3/5 RS-232 Transceiver | Texas Instruments (Tape & Reel)
MAX3243EIPWR

MAX3243EIPWR - 500kbps 3/5 RS-232 Transceiver | Texas Instruments (Tape & Reel)

The Texas Instruments MAX3243EIPWR is a 3-to-5.5 V multichannel RS-232 line driver and receiver supporting a maximum data rate of 500 kbps. It integrates three drivers and five receivers in a 28-pin TSSOP (PW) package, and its transceiver outputs provide plus or minus 15 kV IEC electrostatic-discharge protection. An RS-232 transceiver is an interface IC that converts logic-level signals into RS-232 line levels and converts received line-level signals back into CMOS-compatible logic. In the broader electronics hierarchy, the MAX3243EIPWR belongs to the interface-controller family, supports the EIA/TIA-232 communications standard, and provides the physical-layer signaling required between computers, industrial controllers, instrumentation, and other serial equipment. The device combines three driver channels and five receiver channels in one package. Its 3-to-5.5 V supply range allows operation from both 3.3 V and 5 V systems, while the 500 kbps maximum data rate supports moderate-speed point-to-point serial links. Automatic shutdown and wake-up functions can reduce supply demand when the associated receiver is inactive, and plus or minus 15 kV IEC ESD protection improves robustness on cables exposed to electrostatic discharge. The MAX3243EIPWR is a pin-compatible member of the MAX3243E interface family, and the TRS3243E designation provides a second-source ordering path for the same device. Its 28-pin TSSOP package is substantially smaller than the older 28-pin DIP representation and supports compact PCB construction. The industrial temperature grade covers minus 40°C to plus 85°C operation, making the device suitable for factory equipment, data acquisition systems, service interfaces, and embedded serial ports. Typical applications include industrial control consoles, laboratory test equipment, point-of-sale terminals, security systems, external data-loggers, and embedded UART links. The three transmitters allow multiple outputs, while the five receivers support several incoming serial ports or multiple receive-connected inputs. The 500 kbps rate is appropriate for configuration transfers, status polling, command exchange, and short-distance industrial communication rather than continuous high-volume file transfers. For layout, keep the IC close to the protected connector and route each RS-232 trace as a short, direct channel. Follow the manufacturer datasheet for charge-pump capacitors, driver output connections, receiver inputs, and the exact supply-bypass arrangement. Confirm signal polarity and receiver input states before enabling a channel, especially when replacing a legacy MAX3243 implementation. This page combines the manufacturer specifications with practical transceiver application guidance, channel-count comparisons, package compatibility analysis, and design notes. These resources help engineers evaluate the MAX3243EIPWR for both new RS-232 designs and existing 28-pin TSSOP board revisions.

RFQ İletişim
MAX3243EIPWRE4 - 500kbps RS-232 Transceiver | Texas Instruments
MAX3243EIPWRE4

MAX3243EIPWRE4 - 500kbps RS-232 Transceiver | Texas Instruments

The Texas Instruments MAX3243EIPWRE4 is a 3 V to 5.5 V multichannel RS-232 line driver and receiver with 500 kbps signaling and plus-or-minus 15 kV IEC ESD protection, housed in a 28-pin TSSOP package. The device is designed for systems that require multiple serial data channels and reliable protection for exposed RS-232 connections. An RS-232 transceiver combines a line driver, which converts logic-level signals into RS-232 voltage levels, with a receiver, which converts incoming RS-232 signals back into logic-level voltages. The MAX3243EIPWRE4 provides three transmitters and five receivers, allowing five inbound channels and three outbound channels in one interface circuit. This integration reduces the number of separate interface ICs required in multi-channel equipment. The MAX3243E family operates from a 3 V to 5.5 V supply, supporting both 3.3 V and 5 V system rails. Its maximum data rate is 500 kbps, making it appropriate for instrumentation, industrial control, data acquisition, point-of-sale equipment, and other serial interfaces operating well below that limit. The E designation corresponds to the enhanced ESD-protection version identified by the manufacturer. The integrated protection is specified as plus-or-minus 15 kV IEC ESD protection. This feature is important when a board connects through an external connector or long cable because electrostatic discharge can otherwise damage the interface IC. Protection capability does not eliminate the need for sound board layout, controlled ground return paths, chassis grounding, and appropriate surge protection in severe environments. The MAX3243EIPWRE4 is specified from minus 40 degrees Celsius to 85 degrees Celsius, covering industrial-temperature commercial equipment. Its 28-TSSOP package is suitable for compact, surface-mounted PCB layouts, but engineers should preserve adequate clearance around the package and route interface signals away from sensitive analog and clock paths. When designing around this transceiver, verify that the host UART, cable connector, logic levels, and line termination match the intended RS-232 application. Software should also handle RS-232 control signals and the behavioral differences between DTE and DCE equipment. The manufacturer product page and datasheet are the authoritative references for electrical limits, pin assignments, truth tables, and recommended application circuits.

RFQ İletişim
MAX3243EIRHBR - 500kbps RS-232 Transceiver | Texas Instruments
MAX3243EIRHBR

MAX3243EIRHBR - 500kbps RS-232 Transceiver | Texas Instruments

The Texas Instruments MAX3243EIRHBR is a multichannel RS-232 line driver and receiver operating from 3V to 5.5V at up to 500kbps, packaged in a 32-VQFN 5x5mm package. It integrates three line drivers, five line receivers, and a dual charge-pump circuit for RS-232 signal-level conversion. An RS-232 transceiver is an interface IC that translates logic-level signals from a host, controller, or embedded processor into RS-232-compatible levels and converts returning RS-232 signals back into logic levels. It belongs to the interface IC hierarchy, where transceiver products connect digital systems to communication ports requiring greater signal range, noise immunity, and electrical protection than ordinary logic I/O provides. The MAX3243EIRHBR provides three transmit channels and five receive channels, allowing several RS-232 links to be consolidated in one device. Its dual charge-pump circuit supports single-supply operation, while the integrated charge-pump capacitors reduce external component count. The device is designed for asynchronous serial communication and meets TIA/EIA-232-F interface requirements. ESD protection is a defining feature of the MAX3243E family. According to the manufacturer product documentation, the serial-port connection pins withstand plus or minus 15kV using the HBM and IEC61000-4-2 air-gap discharge methods, plus or minus 8kV using the IEC61000-4-2 contact-discharge method. These ratings help protect connector-facing circuitry from electrostatic discharge events. Typical applications include industrial serial-port adapters, test and measurement equipment, point-of-sale terminals, data-acquisition modules, and embedded systems that connect legacy RS-232 peripherals. The combination of multiple drivers, multiple receivers, a 3V to 5.5V supply range, and protected connector pins supports compact multi-port designs where board area and component count are important. PCB layout should keep the charge-pump capacitor connections and connector-side signal paths compact and appropriately separated. Pay particular attention to exposed-pad soldering, grounding, and the relationship between external cable transients and the protected RS-232 pins. Verify the complete pin configuration in the manufacturer pin-description table before assigning signals because the orderable RHB package includes power, ground, driver, receiver, and exposed-pad connections. This page combines the manufacturer's electrical and protection ratings with package information, same-footprint alternatives, application guidance, and design-oriented comparisons. These engineering details help distinguish the MAX3243EIRHBR from lower-channel-count transceivers, alternative data-rate versions, and other 32-pin RS-232 interface families.

RFQ İletişim
MAX3243EIRHBRG4 - 500kbps RS-232 Transceiver | Texas Instruments
MAX3243EIRHBRG4

MAX3243EIRHBRG4 - 500kbps RS-232 Transceiver | Texas Instruments

Texas Instruments MAX3243EIRHBRG4 is a 3 V to 5.5 V multichannel RS-232 line driver/receiver featuring three drivers, five receivers, a dual charge-pump circuit, and a 500kbps data rate. The device is packaged in a 32-pin VQFN (HVQCCN) package measuring 5 mm by 5 mm and is specified for an industrial temperature range of -40 °C to 85 °C. An RS-232 transceiver is an interface integrated circuit that converts logic-level signals into RS-232 line levels and converts received RS-232 signals back into logic levels. Within the interface hierarchy, the MAX3243E combines a line driver, line receiver, and charge-pump voltage converter to support the bipolar voltage swings required by TIA/EIA-232-F on systems powered from a single 3 V to 5.5 V supply. The MAX3243E family includes 3-to-5.5 V operation, a 500kbps maximum data rate, and enhanced electrostatic-discharge protection. According to the manufacturer product information, serial-port pins provide plus-or-minus 15kV HBM and IEC61000-4-2 air-gap discharge protection, plus plus-or-minus 8kV IEC61000-4-2 contact-discharge protection. These ratings are important when the interface connects to externally accessible equipment through an unprotected cable. Internally, the dual charge-pump circuit generates the positive and negative voltages used by the line drivers, allowing the device to operate from a single low-voltage supply without an external negative supply. Three line drivers and five line receivers support common RS-232 serial-port arrangements where more receive channels are useful for handshake, status, or control signals. The receiver architecture is intended for asynchronous communication-controller interfaces operating at rates up to 500kbps. Typical applications include industrial serial links, data-acquisition equipment, barcode and point-of-sale systems, test instrumentation, and embedded control systems. It is also suitable for equipment implementing RS-232 over cable runs where surge and electrostatic-discharge exposure is likely. System designers should still retain appropriate board-level grounding, cable routing, and chassis-protection practices because the IC ratings address specified ESD test conditions rather than every possible surge event. The primary design consideration is decoupling. Place the charge-pump capacitors and supply capacitors close to their designated pins, keep the exposed-pad thermal and electrical connection correctly implemented, and follow the manufacturer layout guidance. Confirm that the selected connector, cable, and system grounding strategy produce compatible RS-232 levels before releasing a production design. This page combines manufacturer specifications, package details, replacement guidance, comparison data, and practical implementation notes for faster engineering evaluation.

RFQ İletişim
MAX3243EUI+ - 3.3V/5V RS-232 Transceiver | Analog Devices
MAX3243EUI+

MAX3243EUI+ - 3.3V/5V RS-232 Transceiver | Analog Devices

Analog Devices MAX3243EUI+ is a +3V to +5.5V RS-232 transceiver with three drivers and three receivers, automatic shutdown and wake-up, full-duplex operation, and enhanced electrostatic-discharge protection in a 28-pin TSSOP package. According to the manufacturer product page, the MAX3243 family is in production and supports both 3V and 5V supply operation. An RS-232 transceiver is a serial-interface integrated circuit that converts between TTL/CMOS logic levels and the voltage-defined RS-232 signal levels used by computer serial ports and industrial equipment. The MAX3243EUI+ belongs to the interface-IC hierarchy: RS-232 transceiver → multi-channel serial-interface transceiver → communications interface IC → semiconductor. Automatic shutdown provides a practical power-management advantage when no valid receiver activity is detected. Key features include a 3V to 5.5V supply range, three transmit channels, three receive channels, AutoShutdown operation, enhanced ESD protection, and a 28-pin TSSOP package. The MAX3243E family description identifies EIA/TIA-232 and V.28/V.24 support, automatic shutdown and wake-up behavior, high data-rate capability, and enhanced electrostatic-discharge protection. These characteristics suit systems that must translate between modern digital logic and legacy RS-232 ports. The MAX3243EUI+ integrates both interface directions on one device, reducing the component count required for a multi-channel serial port. Its automatic shutdown function can reduce power consumption when the remote system is disconnected or inactive. The 28-pin TSSOP is a surface-mount package that supports conventional PCB assembly, although exact pin assignments, capacitor values, and electrical limits must be confirmed from the manufacturer datasheet before layout or replacement qualification. Typical uses include industrial control equipment, data-acquisition systems, configuration ports, service interfaces, and embedded systems that need to communicate with RS-232 peripherals. It is also appropriate for battery-powered or portable equipment where automatic shutdown can conserve energy during idle periods. In those applications, logic-level compatibility, ESD protection, and cable-receiver behavior are as important as the nominal data rate. When designing around the MAX3243EUI+, verify the complete supply range, operating temperature, absolute maximum ratings, driver slew rate, receiver thresholds, and required external charge-pump capacitors against the manufacturer datasheet. Place the interface IC close to the connector, route driver outputs toward the protected connector side, and provide a low-impedance ground return so common-mode noise does not corrupt receiver inputs. This page consolidates verified manufacturer and distributor information with practical selection guidance, parameter comparisons, and engineering-oriented interface design notes. It also distinguishes verified drop-in candidates from unresolved alternatives, helping engineers reduce sourcing risk while retaining the required 28-pin TSSOP footprint.

RFQ İletişim
MAX3243EUI+T - 3/5 RS-232 Transceiver, 250kbps | Maxim
MAX3243EUI+T

MAX3243EUI+T - 3/5 RS-232 Transceiver, 250kbps | Maxim

The Maxim Integrated MAX3243EUI+T is a 3-driver/5-receiver, full-duplex RS-232 transceiver designed for 3 V to 5.5 V operation. It supports data rates up to 250 kbps and provides ±15 kV ESD protection in a 28-pin TSSOP package. The MAX3243EUI+T also includes Maxim's AutoShutdown feature, which disables the internal charge pump and driver circuitry when the receiver inputs do not detect a valid signal level. An RS-232 transceiver is an interface IC that translates between logic-level signals and the bipolar voltage levels used by RS-232 links. The MAX3243 belongs to the RS-232 transceiver class within interface ICs, where it combines drivers, receivers, an on-board charge pump, and low-power shutdown control. This integration reduces the number of external components required for portable equipment, industrial controllers, and computer peripherals. Key features include three RS-232 drivers, five RS-232 receivers, full-duplex operation, a 3 V to 5.5 V supply range, operation at up to 250 kbps, and ±15 kV ESD protection. AutoShutdown is particularly useful in battery-powered equipment because the device can reduce supply consumption when no valid receiver signal is present. A complementary always-active receiver supports continuous monitoring in designs that cannot tolerate shutdown of every receiver path. The MAX3243 family combines an on-board power supply with RS-232 line-driver and receiver functions. Maxim's AutoShutdown circuitry detects whether a valid signal is present on the receiver inputs and shuts down the onboard supply and drivers when appropriate. The MAX3243EUI+T therefore supports both energy-efficient intermittent communication and always-active monitoring within one interface device. Typical uses include battery-powered instruments, point-of-sale equipment, industrial data-acquisition systems, printers, portable computers, and external communications equipment. Its 28-pin TSSOP package is appropriate for compact industrial and embedded assemblies where three RS-232 outputs and five inputs are required. The interface is especially useful when a system must monitor several incoming lines while retaining the option to place unused drivers into a low-power state. When designing around the MAX3243EUI+T, place the charge-pump capacitor and receiver and driver interface components according to the manufacturer's recommended layout. Confirm that every connected RS-232 line is protected against electrostatic discharge and that the selected cable does not exceed the voltage and grounding requirements of the RS-232 interface. Firmware should also account for AutoShutdown behavior when a remote system may disconnect without first sending a valid signal. This product record combines the manufacturer specifications with package, application, comparison, and design guidance. It also separates exact catalog facts from electrical details that still require confirmation in the current Analog Devices or Maxim Integrated datasheet, helping engineers evaluate the MAX3243EUI+T for new RS-232 designs without confusing it with the faster MAX3243E or lower-speed MAX3243C variants.

RFQ İletişim
MAX3243EUU - 3V to 5.5V RS-232 Transceiver | Analog Devices
MAX3243EUU

MAX3243EUU - 3V to 5.5V RS-232 Transceiver | Analog Devices

The Analog Devices MAX3243EUU is a multichannel RS-232 line driver and receiver operating from a 3V to 5.5V supply, with data rates up to 250 kbps and integrated protection for RS-232 transceiver applications. The MAX3243 family is designed for portable equipment, data acquisition systems, industrial controls, and battery-powered instruments where low supply voltage, automatic shutdown, and compact serial-interface integration are important. An RS-232 transceiver is a bidirectional interface IC that converts logic-level UART signals into RS-232 line levels and converts received line-level signals back into CMOS-compatible digital signals. The MAX3243 combines multiple drivers and receivers with charge-pump circuitry for ±RS-232 voltage generation, reducing the external component count compared with discrete implementations. In the MAX3243EUU, this integration supports a low-voltage system architecture without requiring a separate 5V-only transceiver. Key electrical features include a 3V to 5.5V operating supply range, multichannel driver and receiver support, and operation up to 250 kbps. The Analog Devices product page identifies the MAX3243 as a production device with AutoShutdown capability, while the TI product listing describes the family as a 3V to 5.5V multichannel 250 kbps RS-232 line driver and receiver with plus-or-minus 15 kV ESD protection. The MAX3243EUU is supplied in a 28-pin small-outline package identified by distributor listings as TSSOP-28. It is appropriate for UART bridges, USB-to-serial adapters, embedded control boards, test equipment, and industrial serial controllers. Its low-voltage operation allows direct use with 3.3V microcontrollers, provided the logic levels and supply arrangement are verified against the device data sheet. Designers should confirm the exact package pinout, exposed-pad requirements, charge-pump capacitor values, and RS-232 line-driver loading limits before layout release. Decoupling capacitors should be placed close to the supply and ground pins, while the auto-shutdown and enable functions should be checked for compatibility with the host system's power-management sequence. This page combines the verified manufacturer and distributor references, pricing information available as of 2026-10-30, package information, and practical design guidance for engineers evaluating the MAX3243EUU in low-voltage serial-interface designs.

RFQ İletişim
MAX3243IDB - 3/5 RS-232 Transceiver | Texas Instruments
MAX3243IDB

MAX3243IDB - 3/5 RS-232 Transceiver | Texas Instruments

The Texas Instruments MAX3243IDB is a 3-driver, 5-receiver RS-232 transceiver operating from 3 V to 5.5 V at up to 250 kbps, with ±15 kV HBM ESD protection in a 28-pin SSOP (DB) package. The industrial-temperature grade supports operation from -40°C to +85°C. An RS-232 transceiver is an interface IC that combines differential line drivers and receivers for point-to-point serial data links. The MAX3243 belongs to the RS-232 interface transceiver family within interface ICs and broader semiconductor signal-processing devices. It translates logic-level signals between a host or controller and external RS-232 equipment, while its driver channels strengthen signals for reliable cable transmission. Key features include three driver channels, five receiver channels, operation across a 3 V to 5.5 V supply range, and 250 kbps data-rate capability. The ±15 kV human-body-model ESD protection helps improve connector and cable-interface ruggedness. The AutoShutdown feature can reduce supply current to 1 µA when the circuit does not detect a valid signal level, making the device useful in power-conscious embedded systems. The MAX3243 uses CMOS-compatible logic interfacing to manage three RS-232 transmit channels and five receive channels. A 28-pin SSOP provides a compact surface-mount footprint, while the -40°C to +85°C rating supports industrial equipment. Its combination of multiple channels, low-voltage operation, and automatic shutdown makes it suitable for systems that require more than a single RS-232 port. Typical applications include industrial serial-port adapters, USB-to-RS-232 interface equipment, data-acquisition controllers, point-of-sale terminals, instrumentation, and embedded systems that exchange command or telemetry data over RS-232 cables. Multiple drivers and receivers also allow one controller to connect to several peripherals when the cable lengths and data rates suit RS-232 operation. PCB implementation requires careful treatment of RS-232 as a differential, bipolar interface rather than a logic-level net. Place the transceiver close to the connector, maintain the intended ground path, and apply the protection and bypass components recommended by the manufacturer. The AutoShutdown circuit may also require correct external capacitor selection for the intended startup behavior. This product record consolidates the key electrical ratings, package details, lifecycle information, cross-reference candidates, and practical design guidance needed to evaluate the MAX3243IDB and plan a replacement before committing to a new PCB layout.

RFQ İletişim
MAX3243IDBG4 - 3/5 RS-232 Transceiver | Texas Instruments
MAX3243IDBG4

MAX3243IDBG4 - 3/5 RS-232 Transceiver | Texas Instruments

The Texas Instruments MAX3243IDBG4 is a 3-driver and 5-receiver RS-232 transceiver designed for 3 V to 5.5 V operation. It supports RS-232 and CMOS interfacing, provides ±15 kV human-body-model ESD protection, and is packaged in a 28-pin SSOP with a 5.30 mm body width. The device is intended for industrial-temperature RS-232 links operating from 0°C to 70°C. An RS-232 transceiver is an interface IC that converts between CMOS logic levels and balanced, single-ended RS-232 signals. It combines line drivers, receivers, and charge-pump support circuitry into one package. Within the interface hierarchy, the MAX3243IDBG4 belongs to the RS-232 transceiver class, connecting low-voltage digital controllers to external serial ports through the EIA RS-232 electrical standard. Key features include three RS-232 drivers, five RS-232 receivers, a 3 V to 5.5 V supply range, and ±15 kV HBM ESD protection. The MAX3243 family also includes AutoShutdown functionality, allowing very low supply current when no valid signal is detected. These characteristics suit equipment requiring multiple serial channels, such as industrial controllers, test systems, point-of-sale equipment, and legacy peripheral interfaces. The device uses Maxim's low-power RS-232 interface approach and operates from both 3.3 V and 5 V system rails. The MAX3243IDBG4 industrial suffix identifies the specified temperature range, while the DBG package code identifies the 28-pin SSOP configuration. Its multi-channel arrangement allows one logic device to connect multiple external RS-232 ports while limiting the number of separate transceiver packages required on the PCB. Typical applications include industrial serial-port expansion, programmable logic controller communications, laboratory data-acquisition equipment, point-of-sale systems, and embedded systems that need to communicate with legacy RS-232 peripherals. The three-driver arrangement is useful when several external devices must receive commands, while the five receivers allow multiple incoming serial signals to be monitored simultaneously. PCB design should preserve the capacitance limits and connection details required by the RS-232 interface while providing suitable decoupling close to the supply pins. Cable-side protection must also account for electrostatic discharge; the IC's ±15 kV HBM rating protects the device pins when used in the application configuration described by the manufacturer, but it does not replace correct grounding, shielding, or cable design. This product page combines the exact ordering information, electrical characteristics, package details, interface role, application guidance, and verified substitution constraints for the MAX3243IDBG4. It also distinguishes genuine same-footprint drop-in choices from cross-package or merely functional equivalents, helping engineers avoid a PCB redesign when replacing the device.

RFQ İletişim
MAX3243IDBR - 3.3V 5V 250kbps RS-232 Transceiver | Texas Instruments
MAX3243IDBR

MAX3243IDBR - 3.3V 5V 250kbps RS-232 Transceiver | Texas Instruments

The Texas Instruments MAX3243IDBR is a 3. to 5.5-V multichannel RS-232 line driver and receiver with 250 kbps data rate and ±15-kV ESD protection, housed in a 28-pin SSOP (DB) package. The device integrates three RS-232 drivers and five receivers, providing a compact interface for low-speed serial data, industrial-control links, and equipment communication. An RS-232 transceiver is an interface IC that combines voltage-line drivers and receivers for serial communication using the RS-232 standard. It belongs to the broader categories of communication interface ICs, interface transceivers, and data-conversion semiconductors. The MAX3243IDBR is intended for systems that need multiple serial channels without allocating a separate driver or receiver for every line. The 3.0-V to 5.5-V supply range supports both 3.3-V and 5-V system rails, while the 250-kbps signaling rate covers common control, configuration, and point-to-point communication links. The integrated ±15-kV human-body-model ESD protection improves tolerance to electrostatic discharge at externally accessible connector pins. The industrial temperature option is specified for operation from -40°C to +85°C. The 28-pin SSOP package is useful for compact board layouts where a higher pin-count RS-232 interface is needed. Its pin arrangement must be matched against the manufacturer datasheet when assigning driver outputs, receiver inputs, supply, ground, and enable-related functions. The MAX3243 family also includes related product variants, so designers should verify the exact ordering code when using a substitute. Typical applications include industrial serial adapters, programmable logic controllers, test equipment, barcode scanners, and embedded control boards. In a PLC or embedded controller, the three drivers can send commands to external modules while five receivers monitor incoming status lines. The 250-kbps rate is more appropriate for control and instrumentation traffic than for high-speed storage transfers. For a new layout, place protection and bypass components close to the device and route exposed RS-232 traces away from sensitive analog and clock nodes. Confirm that the selected connector, cable, and ground strategy are appropriate for the intended RS-232 environment. This page combines the manufacturer specifications, package information, sourcing workflow, replacement guidance, and practical design considerations for faster component selection.

RFQ İletişim
MAX3243IDW - 250kbps 3/5 RS-232 Transceiver | Texas Instruments
MAX3243IDW

MAX3243IDW - 250kbps 3/5 RS-232 Transceiver | Texas Instruments

Texas Instruments MAX3243IDW is a 3- to 5.5-V multichannel RS-232 line driver and receiver capable of operation up to 250 kbps, with ±15 kV Human Body Model ESD protection on bus pins. The device integrates three drivers and five receivers in a 28-pin DW SOIC package, making it suitable for multichannel serial-interface equipment. An RS-232 transceiver is an interface IC that converts between single-ended logic-level signals and the bipolar voltage levels used by RS-232 equipment. It combines drivers, receivers, and often charge-pump voltage-generation circuitry into one package. This integrated approach reduces external component count and helps designers implement PC serial ports, industrial controls, data-collection equipment, and other systems that require reliable serial communication over longer cable runs. The MAX3243IDW operates from a 3 V to 5.5 V supply, allowing use in both 3.3 V and 5 V systems. Its 250 kbps signaling rate supports legacy serial-port data rates and other multichannel RS-232 links. Individual channel enable and shutdown functions provide control over transmitter and receiver activity, while AutoShutdown operation reduces supply current when no valid signal is present. The integrated charge pump supports standard RS-232 voltage generation without an external DC-DC converter. Electrical protection is a significant feature for connector-facing circuits. The MAX3243 provides ±15 kV ESD protection using the Human Body Model on RS-232 bus pins. Protection does not replace proper connector design, external surge protection, or controlled cable routing, but it adds a useful barrier against electrostatic discharge encountered during handling and field installation. Typical applications include DE-9 serial-port interfaces, industrial data acquisition, point-of-sale equipment, test and measurement systems, and embedded control systems that exchange commands or diagnostic data with RS-232 peripherals. The three-driver and five-receiver arrangement is especially useful when one controller must communicate with multiple external devices while maintaining independent transmit control. Design should account for charge-pump capacitor selection, local bypassing, unused-channel configuration, and the voltage-versus-current behavior of RS-232 drivers. Keep ground and signal routing consistent with the referenced design, place bypass and charge-pump components close to the device, and validate cable length and data rate together because both influence signal integrity and receiver margin. This product page combines the manufacturer's electrical and package information with practical interface guidance, application scenarios, parameter-level comparisons, and replacement criteria. It is intended to help engineers determine whether the MAX3243IDW meets voltage, channel-count, data-rate, ESD, package, and lifecycle requirements before committing it to an RS-232 design.

RFQ İletişim
MAX3243IDWRG4 - 3.3V/5V RS-232 IC | Texas Instruments
MAX3243IDWRG4

MAX3243IDWRG4 - 3.3V/5V RS-232 IC | Texas Instruments

The Texas Instruments MAX3243IDWRG4 is a multichannel RS-232 line driver and receiver with a 3 V to 5.5 V supply range, three driver channels, five receiver channels, and ±15 kV ESD protection in a 28-pin SOIC package. It combines bidirectional RS-232 interface capability with CMOS-compatible logic and low-power shutdown behavior for industrial equipment, data acquisition systems, and service-port designs. An RS-232 transceiver is an interface IC that converts logic-level signals between a host or controller and equipment using the RS-232 standard. A line driver translates host-side digital signals into RS-232 levels, while a receiver converts the bipolar serial signal back into a digital level. Within the interface hierarchy, the MAX3243IDWRG4 belongs to the RS-232 transceiver class of multi-channel interface ICs used to bridge TTL, CMOS, and serial equipment. The device operates from 3 V to 5.5 V, allowing use with both 3.3 V and 5 V systems. It provides three RS-232 drivers and five receivers, making it useful for designs with several communication ports or more receive inputs than transmit outputs. Its ±15 kV human-body-model ESD protection improves robustness at externally accessible connector pins, while its 1 µA shutdown supply current supports power-conscious systems that disable the interface when it is not needed. The MAX3243 family combines charge-pump voltage generation and CMOS driver and receiver circuitry in one device. Charge-pump circuitry develops the RS-232 level-shift voltage required when the supply cannot directly generate the required output swing. This integrated approach reduces the number of external components compared with discrete RS-232 interface networks and simplifies connections among logic-level controllers and remote serial equipment. Typical uses include industrial control equipment, instrumentation, data loggers, POS terminals, and computer peripheral connections. The five receiver channels can monitor multiple incoming lines, while the three drivers support outbound RS-232 channels. Systems using the shutdown function can reduce supply consumption when the interface is inactive, although power-management timing must be coordinated with the host controller. PCB layout should follow the capacitor and charge-pump recommendations in the manufacturer datasheet, particularly regarding input and output bypassing capacitors and placement near the device. Keep the RS-232 connector side physically separated from sensitive logic or analog circuitry where practical, and route high-energy external lines away from low-level signal traces to reduce ESD and surge-related coupling. This product page combines electrical characteristics, interface-use guidance, package details, and design considerations to support faster component selection. It also distinguishes verified pin-compatible replacement options from alternatives that require a different footprint, helping engineers evaluate a MAX3243IDWRG4 redesign before committing to a PCB change.

RFQ İletişim
MAX3243IPW - 250kbps RS-232 Transceiver | Texas Instruments
MAX3243IPW

MAX3243IPW - 250kbps RS-232 Transceiver | Texas Instruments

The Texas Instruments MAX3243IPW is a 3- to 5.5-V multichannel RS-232 line driver and receiver rated for data rates up to 250 kbps, with three drivers and five receivers in a 28-pin TSSOP package. The device is designed for serial-port and other point-to-point RS-232 interfaces where several channels must share one low-voltage supply. An RS-232 transceiver is an interface IC that combines the electrical functions required to communicate between TTL or CMOS logic and RS-232 logic levels. Within the interface hierarchy, the MAX3243IPW is a multichannel RS-232 transceiver, also described as a line driver and receiver. Its driver channels convert logic-level inputs into RS-232-compatible signals, while its receiver channels convert incoming RS-232 signals into logic-level outputs. The MAX3243IPW operates from 3 V to 5.5 V, supports signaling up to 250 kbps, and includes ±15-kV ESD protection using the HBM test method on the serial-port connection pins. Three drivers and five receivers provide an asymmetric channel count suited to applications such as DE-9 serial connections. The manufacturer also describes AutoShutdown functionality and always-enabled ROUT2B and INVALID outputs for monitoring ring and valid-input status. The wider supply range allows the interface to operate from 3.3-V or 5-V system rails without a separate RS-232 transceiver supply. Multiple integrated drivers and receivers reduce the number of external interface ICs required in multi-channel equipment. Always-enabled status outputs can simplify supervision of modem or communications equipment, although their fixed operation should be checked against the system power-management architecture. Typical uses include legacy RS-232 serial ports, industrial control interfaces, data-acquisition equipment, point-of-sale terminals, and embedded systems requiring legacy peripheral connectivity. The MAX3243IPW can also complement a modern microcontroller or transceiver module when an existing enclosure or cable standard still exposes RS-232 signals. Careful signal-level, grounding, and ESD layout practices remain necessary in electrically noisy environments. For PCB design, place the device near the connector or protected interface entry point and route protected RS-232 traces away from sensitive analog and clock circuitry. Confirm that the exposed connector pins have appropriate surge and ESD protection because the integrated ±15-kV HBM rating does not eliminate the need for an engineered external protection strategy. Follow the manufacturer pin-description and layout guidance for decoupling, grounding, and protection-network placement. This product reference combines the MAX3243IPW electrical identity, verified package information, channel configuration, interface capabilities, and application-oriented engineering guidance. It also provides a framework for checking pin-compatible alternatives, understanding the limits of interface protection, and selecting between integrated transceivers, system transceivers, and newer communication architectures.

RFQ İletişim