Analog Devices

MAX3243EETI+T - 250kbps RS-232 Transceiver | Analog Devices

MPN: MAX3243EETI+T ✓ Aktif
3V to 5.5V Vdss 1µA Id QCCN Package
MOQ: 1 |

MAX3243EETI+T Genel Bakış

Analog Devices MAX3243EETI+T is a 3-channel RS-232 line driver and receiver operating from a 3V to 5.5V supply at data rates up to 250kbps. The device provides ±15kV electrostatic-discharge protection and uses AutoShutdown to reduce supply current to 1µA when no valid receiver signal is present. It is packaged in a 28-terminal, no-lead square QFN package designated QCCN.

A multi-channel RS-232 transceiver combines push-pull line drivers and receivers for bidirectional data transfer between a host and an external serial device. In the broader hierarchy, MAX3243EETI+T is an interface transceiver, an interface IC, and a semiconductor for establishing the physical signal layer required by RS-232 equipment. The AutoShutdown function is particularly useful in battery-powered instruments, portable test equipment, and systems where an inactive serial port must not continue consuming power.

The 3V to 5.5V operating range permits operation from both 3.3V and 5V system rails. Its 250kbps maximum signaling rate supports data rates above the traditional 20kbps RS-232 limit while remaining suitable for instrument control, point-of-sale equipment, industrial controllers, and embedded peripheral links. ±15kV ESD protection improves tolerance of connector-borne transients, although it does not eliminate the need for correct board layout and external protection strategy.

The MAX3243 family combines low-power supply design with multiple driver and receiver channels. AutoShutdown detects whether valid signal levels appear on receiver inputs and disables the internal supply and drivers when the port is idle. This behavior allows a direct interface to operate from modern low-voltage digital rails without requiring a separate power-control transistor. The exact charge-pump, driver-slew, and receiver-threshold details should be confirmed against the manufacturer datasheet before finalizing a new design.

Typical uses include multichannel instrument-control links, data acquisition, barcode and point-of-sale terminals, industrial serial adapters, and embedded systems that exchange RS-232 data with legacy peripherals. The 28-terminal QFN footprint also requires careful PCB planning because its compact leadless geometry leaves less visible inspection area and demands accurate land patterns, solder-paste control, and thermal-via placement.

For a robust implementation, keep the MAX3243EETI+T close to the RS-232 connector, route driver and receiver traces away from sensitive analog circuitry, and place charge-pump and interface capacitors at the pins specified by the reference design. Confirm signal polarity, receiver thresholds, shutdown behavior, and grounding with the system-level RS-232 requirements rather than assuming that every ±15V RS-232-compatible product is electrically interchangeable.

This page combines manufacturer specifications, package information, practical RS-232 design guidance, and carefully qualified same-family replacement options. It is intended to help engineers determine whether the MAX3243EETI+T fits the required voltage, data rate, channel count, package, and protection level before committing the part to a PCB or production BOM.

Drop-in alternatifler için MAX3243EETI+T — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

Bu Serideki Variantlar

Yedek parça uyumlu olan aynı serideki modeller MAX3243EETI+T (aynı form faktörü ve ayağa oturma) — farklı olan Package, Supply Voltage Range, Maximum Data Rate, ESD Protection, Product Type.

Analog Devices
Package: 32-pin TQFN, 7 mm x 7 mm
Supply Voltage Range: 3.0 V to 5.5 V
Maximum Data Rate: 250 kbps
İle Karşılaştır MAX3243EETI+T →
Analog Devices
Package: 28-pin TSSOP
Supply Voltage Range: 3.0V to 5.5V
Product Type: RS-232 transceiver
İle Karşılaştır MAX3243EETI+T →
Analog Devices
Package: 28-pin SOIC
Maximum Data Rate: 250 kbps
Product Type: RS-232 transceiver
İle Karşılaştır MAX3243EETI+T →

MAX3243EEUI+T

✅ Yerleştirme
Analog Devices
📦 QCCN-28
RS-232 transceiver · 3.0V to 5.5V · 250kbps · 3 drivers · 5 receivers · Full duplex · ±15kV · 1µA

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

MAX3243EETJ+T

✅ Yerleştirme ⚠️ Onaylanmamış Özellikler
Analog Devices
📦 QCCN-28
RS-232 transceiver · 3 · 5 · 3.0 V to 5.5 V · 250 kbps · 15 kV · 1 A maximum · Yes

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

MAX3243EWI+T

✅ Yerleştirme ⚠️ Onaylanmamış Özellikler
Analog Devices
📦 QCCN-28
RS-232 transceiver · 3 channels · 5 channels · 3 V to 5.5 V · 250 kbps · ±15 kV · 1 µA · Full duplex

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

MAX3243EETI+T Özellikler

Product Type RS-232 line driver and receiver
Number of Driver/Receiver Channels 3 channels
Supply Voltage Range 3V to 5.5V
Maximum Data Rate 250kbps
ESD Protection ±15kV
AutoShutdown Supply Current 1µA
Power-Saving Feature AutoShutdown
Temperature Grade Industrial
Number of Terminals 28 terminals
Package Code QCCN
Package Shape Square
Terminal Form No lead
Montaj Türü Surface mount
Product Type Hierarchy RS-232 transceiver > interface transceiver > interface IC > semiconductor
Interface Standard RS-232

MAX3243EETI+T square Pin Yapısı Kılavuzu

MAX3243EETI+T (square paket) için pin yapısı. Pin numaralandırma, işlevleri ve bağlantı şemaları üretici veri kitapçığında tanımlanmıştır. Doğru ayak ve soldurma kılavuzları için onu referans alın.

square paket pin çizelgesi için MAX3243EETI+T

Ayrıntılı pin çıkış verisi mevcut değil: MAX3243EETI+T.

Aşağıdaki veri sayfası tam pin konfigürasyonu için.

Tipik Uygulamalar

MAX3243EETI+T için uygundur 6 uygulamas: Industrial instrument control, Portable data acquisition, Point-of-sale terminal interface, Embedded serial adapter, Barcode and scanner interface, Legacy peripheral connectivity.

🏭

Industrial instrument control

The MAX3243EETI+T fits industrial instrument controllers that exchange commands and measurements over RS-232. Its three-channel arrangement supports multiple serial links without requiring a separate transceiver for each connection, while the 250kbps rate exceeds the throughput of a conventional 20kbps RS-232 port. The 3V-to-5.5V supply range permits use with 3.3V and 5V control electronics. The ±15kV ESD rating is useful at accessible instrument connectors, although enclosure and cable practices remain important. AutoShutdown can reduce idle consumption to 1µA when valid receiver activity is absent, helping conserve power in supervisory or intermittently connected test systems.

📟

Portable data acquisition

Portable data-acquisition units can use the MAX3243EETI+T to connect a controller to external sensors, fixtures, or laboratory computers through RS-232. The 250kbps maximum data rate supports compact command and measurement traffic, and the 3V-to-5.5V operating range accommodates both 3.3V and 5V platforms. AutoShutdown is valuable when acquisition occurs intermittently because the transceiver can reduce supply current to 1µA when no valid receiver signal is detected. Its 28-terminal QCCN package also conserves board area, but designers must allocate the exact land pattern and confirm connector-side grounding and signal polarity.

🖥️

Point-of-sale terminal interface

The MAX3243EETI+T is appropriate for point-of-sale equipment that connects a peripheral, printer, scanner, or service terminal through RS-232. Three driver and receiver channels can organize separate data, control, and status paths, while operation from 3.3V or 5V rails supports embedded terminal designs. The 250kbps rate provides margin for transaction and diagnostic traffic. AutoShutdown lowers standby consumption when the port is inactive, while ±15kV ESD protection adds useful defense at a physically accessible connector. Firmware should avoid false valid-signal detection from idle-line biasing, and the selected cables must preserve the intended RS-232 signal polarity.

🧩

Embedded serial adapter

A compact embedded adapter can use the MAX3243EETI+T to bridge a modern controller to an RS-232 device. The low-voltage 3V-to-5.5V supply range avoids requiring a dedicated 5V-only interface rail, and three channels reduce the component count when multiple legacy ports are present. At rates up to 250kbps, the transceiver can handle configuration exchanges, diagnostic logs, and short data packets. Its 28-terminal QCCN package reduces PCB area but requires careful escape routing and assembly control. AutoShutdown can further reduce standby power in battery-operated adapters when the linked equipment leaves the receive lines idle.

📷

Barcode and scanner interface

The MAX3243EETI+T can serve barcode scanners, identification terminals, and local service equipment that communicate with a host through RS-232. The 250kbps capability is substantially faster than a traditional 20kbps interface and comfortably accommodates short scanner packets and command traffic. Operating from 3V to 5.5V makes it practical in mixed-voltage embedded systems, while three channels allow dedicated paths for data, control, and handshake signals. The 1µA AutoShutdown current reduces standby demand when the scanner is disconnected, and ±15kV ESD protection strengthens the interface against electrostatic discharge encountered during service and handling.

🔧

Legacy peripheral connectivity

The MAX3243EETI+T is useful when a modern processor must communicate with a legacy printer, controller, or service peripheral that exposes only RS-232. Its three driver/receiver channels support a flexible allocation of transmit, receive, and control signals, while the 250kbps rate improves responsiveness compared with a conventional 20kbps port. The 3V-to-5.5V supply range allows direct operation from common embedded rails without a separate level-shifting supply. AutoShutdown reduces idle power, but the system must account for valid-signal detection on idle lines. The QCCN-28 footprint should be compared carefully with any board-reuse plan.

What is the operating voltage of MAX3243EETI+T?
The MAX3243EETI+T operates from a 3V to 5.5V supply. According to the Analog Devices MAX3243 product information and the TI MAX3243 product page, this range supports both 3.3V and 5V system rails. The manufacturer identifies the device as a multichannel RS-232 line driver and receiver with a maximum signaling rate of 250kbps. Check the external charge-pump capacitor and interface component requirements in the manufacturer datasheet before finalizing the supply rails and decoupling arrangement.
How fast can MAX3243EETI+T transmit RS-232 data?
The MAX3243EETI+T supports RS-232 data rates up to 250kbps. The TI MAX3243 product page identifies the part as a 3V-to-5.5V multichannel, 250kbps RS-232 line driver and receiver. This is above the traditional 20kbps ceiling associated with many older RS-232 implementations, making the device suitable for instrument control, embedded peripherals, and data-acquisition systems that need more throughput than a legacy port can provide.
What does AutoShutdown do in the MAX3243EETI+T?
AutoShutdown reduces MAX3243EETI+T supply current to 1µA when the receiver inputs do not detect a valid signal level. According to the Analog Devices MAX3243 product information, the on-board supply and drivers shut down when no valid activity is present. This can conserve power in portable instruments and intermittently connected serial equipment. Designers should still confirm how local bus biasing and external circuitry affect valid-signal detection in the finished system.
How much ESD protection does MAX3243EETI+T provide?
The MAX3243EETI+T provides ±15kV electrostatic-discharge protection. Both the TI MAX3243 product page and the distributor product descriptions identify the MAX3243 family with ±15kV ESD protection. This rating helps the interface withstand electrostatic discharge at a connector or exposed interface point. It does not replace good enclosure design, controlled grounding, cable treatment, and protection appropriate to the installation environment.
What is the MAX3243EETI+T package and pin count?
The MAX3243EETI+T is packaged in a 28-terminal, no-lead, square surface-mount package with package code QCCN. Product records for the exact ordering code identify 28 terminals and industrial temperature grade. The manufacturer datasheet should be used for the land pattern, exposed-pad treatment, pin names, and PCB dimensions because a compact leadless QFN package requires close adherence to the recommended footprint and assembly process.
Where can I download the MAX3243EETI+T datasheet PDF?
The MAX3243EETI+T datasheet and technical documentation can be accessed through the Analog Devices MAX3243 product page at https://www.analog.com/en/products/max3243.html. The manufacturer page provides the authoritative electrical characteristics, truth tables, pin descriptions, typical application circuits, and ordering information. Use the MAX3243 family documentation because MAX3243EETI+T is a specific package and temperature-grade ordering variant within that family.
Where can I find the MAX3243EETI+T pinout?
The MAX3243EETI+T pinout is documented in the pin-description section of the manufacturer MAX3243 datasheet. The exact ordering code uses a 28-terminal QCCN package, so engineers should match the package drawing and pin-description table before assigning PCB nets. Do not infer every pin function from a generic RS-232 transceiver diagram because enable, shutdown, ground, charge-pump, and driver/receiver assignments must follow the specific family documentation.
What is the best drop-in replacement for MAX3243EETI+T?
A drop-in replacement must match the 28-terminal QCCN footprint, pin arrangement, electrical ratings, temperature grade, and ordering requirements. MAX3243EEUI+T, MAX3243EETJ+T, and MAX3243EWI+T are same-family options identified for review, but each should be checked for its exact package and temperature-range differences before substitution. The qualified replacement candidates listed here are not interchangeable solely because they share the MAX3243 family name.
Can MAX3243EEUI+T replace MAX3243EETI+T?
MAX3243EEUI+T can be evaluated as a same-family drop-in candidate because it is identified in the family cross-reference results, but substitution requires verification of its package dimensions, pinout, temperature range, and exact ordering suffix. The manufacturer datasheet and package drawings should be compared line by line. If any package, lead, exposed-pad, or environmental qualification differs, the existing PCB may require modification and the part should not be treated as a true drop-in replacement.
MAX3243EETI+T vs MAX3243EEUI+T — which is better for an industrial controller?
Choose the MAX3243EETI+T when the exact industrial-grade QCCN ordering option is required by the system specification; evaluate MAX3243EEUI+T when its documented temperature range and qualification better match the installation. Both belong to the MAX3243 interface family, but suffix differences can encode package, temperature, or qualification changes. The decisive comparison is the manufacturer ordering table: confirm the 28-terminal footprint, operating-temperature range, and environmental qualification before choosing.
When should I choose MAX3243EETI+T over another MAX3243 variant?
Choose MAX3243EETI+T when the design specifically needs a 3V-to-5.5V, three-channel RS-232 transceiver supporting 250kbps in a 28-terminal QCCN package and the industrial temperature grade shown for this ordering code. Select another family member only when a documented package, temperature range, channel count, or qualification change is acceptable. The MAX3243EETI+T is especially suitable when low-power AutoShutdown and connector-side ESD protection are important.
Is MAX3243EETI+T suitable for portable test equipment?
The MAX3243EETI+T is suitable for portable test equipment that uses RS-232 and benefits from low idle power. Its 1µA AutoShutdown supply current, 3V-to-5.5V supply range, 250kbps data rate, and ±15kV ESD protection align with compact instruments that spend substantial time idle or intermittently connected. Use a low-leakage connector design and confirm that shutdown detection behaves as required when the remote RS-232 line is idle or biased.
Where can I buy MAX3243EETI+T and check its lead time?
Use the Request a Quote form on this page to request MAX3243EETI+T availability, current lead time, minimum order quantity, and shipment requirements. The manufacturer product page confirms the family and ordering identity, while distributor listings can assist with sourcing decisions. Because inventory and lead time change frequently, request the current commitment for the exact MAX3243EETI+T ordering code rather than relying on an archived stock statement.
What is the price of MAX3243EETI+T?
The current commercial terms for MAX3243EETI+T should be obtained through the Request a Quote form on this page. Quote requests should specify the required quantity, package format, shipment destination, and target date so the supply team can confirm current product availability and delivery. The exact ordering code must be quoted as MAX3243EETI+T because closely related MAX3243 variants can differ in package, temperature grade, or qualification.
Is MAX3243EETI+T in stock?
Current stock for MAX3243EETI+T should be confirmed through the Request a Quote form on this page. Supply status can vary by package format, order quantity, and manufacturing allocation, so a family-level inventory statement is not sufficient for the exact 28-terminal QCCN ordering code. Provide your required quantity and delivery schedule with the request to obtain a current supply commitment for MAX3243EETI+T.
What are the key specifications of MAX3243EETI+T that engineers should know?
The key specifications are a 3V-to-5.5V supply, three RS-232 channels, a 250kbps maximum data rate, 1µA AutoShutdown supply current, ±15kV ESD protection, and a 28-terminal QCCN package. The manufacturer product information also identifies the device as an industrial-grade line driver and receiver. These specifications make it relevant to compact industrial controllers, portable instruments, data-acquisition equipment, and embedded systems using a legacy RS-232 physical interface.

Mühendislik referans verileri: MAX3243EETI+T — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Choose MAX3243EETI+T when the design requires three RS-232 channels, operation from a 3V-to-5.5V rail, data rates up to 250kbps, ±15kV ESD protection, and a 28-terminal QCCN footprint. It is particularly attractive for portable and industrial equipment because AutoShutdown can reduce idle supply current to 1µA. Evaluate MAX3243EEUI+T, MAX3243EETJ+T, or MAX3243EWI+T when a documented suffix-specific temperature range or qualification better matches the deployment, but verify the package drawing and ordering table before calling any of them a drop-in replacement. Do not select a smaller-outline MAX3243 variant solely for PCB simplification if that changes the footprint. If the system does not need RS-232, consider the interface standard and signal levels first rather than choosing a transceiver solely by channel count. For production releases, confirm exact operating-temperature limits, exposed-pad construction, lifecycle commitment, and all capacitor values against the manufacturer datasheet.

Alternatiflerle Karşılaştırma

Parametre Bu Ürün MAX3243EEUI+T MAX3243EETJ+T MAX3243EWI+T
Brand Analog Devices Analog Devices Analog Devices Analog Devices
Package QCCN-28 QCCN-28 QCCN-28 QCCN-28
Product Type RS-232 line driver and receiver RS-232 line driver and receiver RS-232 line driver and receiver RS-232 line driver and receiver
Terminal Count 28 terminals 28 terminals 28 terminals 28 terminals
Power-Saving Feature AutoShutdown AutoShutdown AutoShutdown AutoShutdown

Ana Farklılayıcılar

  • Three-channel RS-232 integration in a compact QCCN package (karşılaştırma:MAX3243EETJ+T)
  • Low-power idle operation for embedded and portable systems (karşılaştırma:MAX3243EEUI+T)
  • Connector-side ESD protection at a higher data rate (karşılaştırma:MAX3243EWI+T)

Tasarım Notları

Use the manufacturer QCCN-28 land pattern and place the required bypass and charge-pump capacitors directly at their designated pins. A leadless QCCN package has short electrical escapes and limited solder-joint inspection area, so small placement deviations can create assembly defects. Keep the transceiver close to the RS-232 connector, preserve adequate return-path continuity, and avoid routing driver outputs beneath sensitive analog or clock traces. Use thermal vias beneath the exposed pad only as directed by the package drawing and assembly guidelines.

Decouple the 3V-to-5.5V supply at the MAX3243EETI+T and follow the manufacturer capacitor values and tolerances. The internal charge-pump circuitry depends on stable supply and external charge-pump components; incorrect capacitance or excessive trace resistance can increase ripple or impair startup. Verify the supply remains within 3V to 5.5V under transient conditions. AutoShutdown reduces the specified idle supply current to 1µA, but it does not remove the requirement for local decoupling during active communication.

Keep RS-232 driver traces away from receiver and low-level analog inputs. Route the connector-side signal and return conductors together where practical to reduce loop area and improve noise immunity. Do not treat the ±15kV ESD rating as a substitute for enclosure grounding or an appropriate external surge-protection strategy. Also verify that no external pull-up, pull-down, or transceiver keeps the receiver inputs at a level that prevents the MAX3243 from detecting a valid signal and entering its intended shutdown state.

Do not substitute MAX3243 family members solely because their headline specifications and package names appear similar. Confirm the exact pin names, exposed-pad connection, temperature range, package dimensions, ordering suffix, and qualification status against the manufacturer documentation. In particular, the MAX3243EEUI+T, MAX3243EETJ+T, and MAX3243EWI+T candidates require suffix-specific review before they are treated as production drop-ins for MAX3243EETI+T.

Uyumluluk Bilgisi

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Kadmiyumdan Arınmış
Unknown
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

No definitive RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals statement was available for the exact MAX3243EETI+T ordering code. Industrial temperature grade is identified, but that designation alone does not establish AEC-Q100 qualification.

Veri doğrulanma tarihi: 2026-11-17 — XAIPART bileşen mühendislik ekibi tarafından doğrulanmış ve derlenmiş veri

İlgili Aramalar

MAX3243EETI+T datasheet MAX3243EETI+T pinout MAX3243EETI+T datasheet pdf MAX3243EETI+T QCCN-28 MAX3243EETI+T RS-232 transceiver MAX3243EETI+T 250kbps MAX3243EETI+T 3V 5.5V MAX3243EETI+T equivalent MAX3243EETI+T replacement MAX3243EETI+T price MAX3243EETI+T stock Analog Devices MAX3243EETI+T

İlgili Bileşenler ve Terimler

Analog Devices MAX3243EETI+T MAX3243EEUI+T MAX3243EETJ+T MAX3243EWI+T RS-232 RS-232 transceiver line driver line receiver interface IC semiconductor AutoShutdown ESD protection 250kbps data rate 3V to 5.5V supply voltage 1µA supply current QCCN-28 QFN package family surface-mount package industrial temperature grade industrial control data acquisition portable test equipment charge-pump capacitor
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle