Ürünler (21.000+)

STM8S208S6T3C 8-Bit 24MHz 32KB MCU | STMicroelectronics
STM8S208S6T3C

STM8S208S6T3C 8-Bit 24MHz 32KB MCU | STMicroelectronics

STMicroelectronics STM8S208S6T3C is an 8-bit STM8S performance-line microcontroller operating at 24 MHz, with 32 KB of Flash program memory and a 44-pin LQFP package measuring 10 mm by 10 mm. It belongs to the STM8S20xxx family, a compact platform for embedded control designs that need moderate processing speed, integrated embedded control functions, and a broad set of GPIO and communication peripherals. What is an 8-bit MCU? An MCU is a semiconductor device that combines a processor core, program memory, data memory, GPIO, and embedded peripherals in one package. In the broader hierarchy, a microcontroller is a type of embedded processor and system-on-chip device. The STM8S208S6T3C uses an 8-bit architecture, making it suitable for cost-sensitive products where control logic, sensor monitoring, user interfaces, and communication tasks must be handled without a high-end application processor. The STM8S208S6T3C is identified as part of the STM8S performance line, whose members provide from 32 KB to 128 KB of Flash program memory according to the manufacturer product-page search result. At 24 MHz, the device provides a practical balance between processing capability and system simplicity. Its 44-LQFP package exposes a larger pin count than small-outline packages, supporting more peripheral connections and leaving additional I/O options for compact control boards. Typical applications for this MCU include industrial control and automation modules, consumer appliances, sensor and monitoring equipment, communication interfaces, motor-control support systems, and compact embedded products. The 8-bit processing core is especially effective for supervisory control tasks, state machines, protocol handling, and discrete I/O management where a higher-complexity processor would add unnecessary cost or power consumption. Designers should use the STM8S208S6T3C datasheet pin-description table when assigning PCB tracks and should confirm the required external clock, reset, programming, decoupling, and peripheral connections. The package and suffix code also determine ordering and assembly details, so an exact mechanical and pinout comparison is required before substituting a related STM8S device. This product summary combines the verified manufacturer family information, distributor package and memory details, lifecycle-relevant sourcing information, and practical engineering guidance to support MCU selection, schematic review, PCB planning, and procurement evaluation.

RFQ İletişim
STM8S208S6T6C - 24MHz 32KB 8-Bit MCU | STMicroelectronics
STM8S208S6T6C

STM8S208S6T6C - 24MHz 32KB 8-Bit MCU | STMicroelectronics

STMicroelectronics STM8S208S6T6C is an 8-bit performance-line microcontroller operating at up to 24 MHz, with 32 KB of Flash program memory organized as 32K x 8 and supplied in a 44-pin LQFP package measuring 10 x 10 mm. The device belongs to the STM8S20xxx family, which combines an economical embedded-control architecture with integrated communication and peripheral resources for compact embedded systems. An 8-bit microcontroller is a programmable semiconductor integrated circuit that executes instructions from nonvolatile Flash memory and uses RAM for working data. Within the product hierarchy, this device is an MCU, an embedded controller, a microprocessor-family semiconductor, and a member of the STMicroelectronics STM8 performance line. Its 24 MHz operating speed supports responsive control loops and practical handling of multiple peripheral functions while retaining the simplicity of an 8-bit architecture. Key characteristics include a maximum CPU frequency of 24 MHz, 32 KB of Flash memory, and 6 KB of SRAM. The STM8S208S6T6C also provides integrated CAN connectivity according to the product comparison information, making it suitable for distributed industrial and automotive control systems. A 44-LQFP package provides a conventional surface-mount solution with numbered leads and a body size of 10 x 10 mm. The STM8S20xxx performance line targets embedded applications requiring more memory and peripheral capability than entry-level devices while retaining the resource profile of an 8-bit MCU. The manufacturer identifies this family as offering configurations from 32 KB through 128 KB of Flash program memory. Device programming and peripheral configuration are handled through the STM8 embedded ecosystem, which supports firmware development, debugging, and production programming workflows. Typical uses include CAN-connected industrial controllers, automotive subsystems, compact automation equipment, sensor hubs, and general-purpose embedded products. In each case, the 24 MHz execution rate and 32 KB Flash allocation provide a practical balance between control performance, firmware capacity, and component cost. Integrated CAN is particularly useful where the controller must exchange data with distributed nodes rather than operate only as a stand-alone device. PCB implementation should follow the manufacturer pinout and land-pattern guidance, including correct decoupling placement and a defined programming interface. Because MCU behavior depends on firmware, clock configuration, peripheral initialization, and brownout behavior, the relevant STM8S208 series reference manual and device datasheet should be treated as the authoritative sources during schematic review and firmware bring-up. This page combines the exact orderable part information, package and memory characteristics, replacement guidance, and practical design considerations into an engineering-focused selection resource. It also distinguishes verified drop-in ordering variants from parts that merely belong to the broader STM8 ecosystem but require PCB or firmware changes.

RFQ İletişim
STM8S903F3M3 - 16MHz 8-Bit MCU | STMicroelectronics
STM8S903F3M3

STM8S903F3M3 - 16MHz 8-Bit MCU | STMicroelectronics

STMicroelectronics STM8S903F3M3 is an 8-bit STM8S-series microcontroller rated for operation up to 16 MHz, with 8 KB of Flash program memory and 1 KB of RAM in a 20-pin SOIC package. The device also includes 640 bytes of true data EEPROM, a 10-bit ADC, two timers, UART, SPI, and I2C interfaces. Its operating supply range is 2.95 V to 5.5 V, while 16 GPIO pins support embedded control and communication tasks. An 8-bit microcontroller is a compact embedded processor designed to execute firmware, read sensors, control outputs, and manage communication interfaces. The STM8S903F3 belongs to the broader STM8 embedded and industrial-control ecosystem. Compared with application-specific logic, a microcontroller consolidates processing, memory, analog measurement, timing, and serial communications into one device, reducing board area and simplifying product maintenance. The 16 MHz operating frequency provides useful processing headroom for real-time control, while 8 KB of Flash stores application code and 640 bytes of EEPROM preserve frequently changed parameters such as calibration values or configuration data. The 10-bit ADC supports analog sensor acquisition, and the two timers help implement periodic tasks, pulse measurement, motor timing, or basic PWM-related functions. UART, SPI, and I2C expand the available connection options for external controllers, sensors, displays, and transceivers. The STM8S core combines an 8-bit architecture with integrated peripheral blocks, allowing firmware to handle sensing and communications without separate interface controllers. Two supply rails—VDD and VDDA—support the digital and analog sections, while the 2.95 V to 5.5 V operating range accommodates common embedded supply conditions. The part includes low-power, power-on, and power-down reset behavior described for the STM8S903F3 family. Typical uses include industrial control modules, compact instrumentation, motor-control front ends, metering equipment, IoT sensor nodes, and cost-sensitive consumer or automotive electronics. The UART is useful for external configuration or diagnostics, SPI supports faster peripheral communication, and I2C accommodates low-speed sensors and memory devices. PCB design should account for analog and digital supply decoupling, stable grounding, and programming access. Place the required input and output capacitors close to their associated pins, route analog inputs away from fast switching nodes, and use a clean ground strategy to reduce ADC noise. Confirm the exact pin function and package dimensions against the manufacturer datasheet before layout release. This page consolidates the manufacturer specifications, interface capabilities, sourcing guidance, and design considerations engineers need to evaluate the STM8S903F3M3 for a new embedded design.

RFQ İletişim
STM8S903F3M6 - 16MHz 8KB 8-Bit MCU | STMicroelectronics
STM8S903F3M6

STM8S903F3M6 - 16MHz 8KB 8-Bit MCU | STMicroelectronics

The STMicroelectronics STM8S903F3M6 is an 8-bit STM8S-series microcontroller operating at 16 MHz, with 8 KB of Flash memory, 16 I/O ports, and a 20-SOIC package. According to the verified distributor data, it is available in a 20-SO package and is identified as an active, RoHS-compliant device with a 2.95 V to 5.5 V supply-voltage range. What is an 8-bit microcontroller? An MCU is a semiconductor device that combines a processor core, program memory, data memory, and peripherals on one integrated circuit. The STM8S903F3M6 belongs to the 8-bit MCU -> embedded microcontroller -> semiconductor hierarchy and is intended for compact control, measurement, and communication systems where a dedicated processor, memory, and serial interfaces are required. Verified specifications identify 8 KB of Flash memory, 1 KB of RAM, 640 bytes of EEPROM, a 10-bit ADC, two timers, UART, SPI, and I²C. These peripherals make the device suitable for sensor acquisition, actuator control, industrial instrumentation, and low-cost embedded products. The 16 MHz clock provides the processing headroom needed for basic control loops and serial data handling, although the verified data does not specify the complete peripheral timing or ADC accuracy. The STM8S903F3M6 uses a 20-SOIC package, also described as a 0.295-inch, 7.50 mm-width SOP package in the verified distributor data. The SOIC outline is a surface-mount package with gull-wing leads, making it suitable for conventional PCB assembly and prototype-to-production transfer. The package pinout and exposed thermal-pad details are not included in the supplied verified data, so the pinout is reported as null rather than inferred. Typical applications include compact industrial controllers, low-power sensor nodes, simple motor or relay-control boards, data-acquisition modules, UART-to-digital bridges, and small SPI or I²C peripheral boards. The STM8 family can be paired with external sensors and communication transceivers, while the integrated ADC supports analog measurement. Final firmware support should be confirmed with the applicable STMicroelectronics development tools and device documentation. For PCB design, preserve the manufacturer's recommended decoupling and grounding layout, and verify all peripheral pins, reset behavior, clock requirements, and package dimensions against the official datasheet before production. This page combines verified distributor specifications, package data, sourcing information, and engineering-oriented application guidance without treating unverified details as guaranteed specifications.

RFQ İletişim
STM8S903F3P3 - 16MHz 8-Bit MCU, 8KB Flash | STMicroelectronics
STM8S903F3P3

STM8S903F3P3 - 16MHz 8-Bit MCU, 8KB Flash | STMicroelectronics

The STMicroelectronics STM8S903F3P3 is an 8-bit STM8S-series microcontroller with a 16 MHz core, 8 KB of Flash program memory, 1 KB of RAM, and 640 bytes of EEPROM in a 20-pin TSSOP package. Its integrated peripherals include a 10-bit ADC, two timers, UART, SPI, and I2C interfaces. An 8-bit microcontroller is a compact embedded-processing component designed for control-oriented products that monitor inputs, operate actuators, and communicate with external devices. The STM8S product type belongs to the hierarchy of microcontroller, embedded processor, semiconductor, and integrated-circuit devices. The STM8S903 access line combines an economical 8-bit architecture with integrated data EEPROM and conventional serial interfaces, making it suitable for compact industrial controllers, measurement instruments, and embedded accessories. The principal system benefits are 8 KB of nonvolatile program storage, 1 KB of volatile data memory, and 640 bytes of true data EEPROM. The 10-bit ADC supports analog measurements, while two timers support timing, pulse generation, and basic motor or LED control functions. UART, SPI, and I2C connectivity allows the MCU to communicate with sensors, displays, transceivers, and external nonvolatile memories without requiring a separate interface controller. The STM8S903F3 operates from a 3.3 V or 5 V supply and is specified for temperatures from -40°C to +125°C. Its 20-pin TSSOP package supports compact surface-mount assemblies while exposing the core control, analog, timing, and communication functions. The STM8S903F3 family combines an 8-bit CPU with a mixed-signal peripheral set designed for cost-sensitive embedded systems that need deterministic control and moderate communication bandwidth. Typical applications include industrial control panels, digital thermometers, environmental monitoring stations, compact motor controllers, sensor-interface modules, and communication-enabled embedded accessories. In each case, the MCU can acquire analog inputs, execute control logic, store operating parameters, and update external peripherals through its integrated communication interfaces. A 16 MHz operating rate supports responsive polling and control without a higher-complexity processor core. When designing the PCB, reserve the 20-pin TSSOP footprint and route power, ground, programming signals, reset, and decoupling according to the manufacturer pin-description table. Place the supply bypass capacitor close to the device and use the pin table when assigning alternate-function signals. Firmware and peripheral configuration should be checked against the STM8S903F3 datasheet and the STM8 toolchain documentation before production release. This product record combines manufacturer specifications, orderable-part information, package details, application guidance, and a structured drop-in comparison. It is intended to help engineers evaluate the STM8S903F3P3 for embedded control designs and to request current commercial availability through the page's Request a Quote form.

RFQ İletişim
STM8S903F3P6 - 16MHz 8-Bit MCU | STMicroelectronics
STM8S903F3P6

STM8S903F3P6 - 16MHz 8-Bit MCU | STMicroelectronics

STMicroelectronics STM8S903F3P6 is an 8-bit STM8S-series microcontroller operating at up to 16 MHz, with 8 KB of Flash program memory and a 20-TSSOP package. The device operates from 2.95 V to 5.5 V and provides 1 KB of RAM, 640 bytes of true EEPROM, a 10-bit ADC, two timers, UART, SPI, and I²C connectivity. It is designed for compact embedded-control systems requiring mixed analog and digital functions without a higher-cost 32-bit MCU. An 8-bit microcontroller is a programmable semiconductor containing a processor core, nonvolatile program memory, data memory, and integrated peripherals. Within the hierarchy of embedded semiconductors, an MCU is below a microprocessor in processing capability but combines greater control simplicity with lower system cost and power use. The STM8S903F3 belongs to STMicroelectronics’ STM8S access line and targets cost-sensitive consumer, appliance, and industrial-control applications. Key features include 8 KB of Flash, 1 KB of RAM, and 640 bytes of EEPROM, allowing firmware, working data, and nonvolatile parameters to be consolidated in one device. The 10-bit ADC supports analog measurement, while two timers support timing and periodic control functions. UART, SPI, and I²C interfaces cover serial communication, sensor connectivity, and expansion to external ICs. The 2.95 V to 5.5 V supply range accommodates both 3.3 V and 5 V system environments. The STM8S903F3 architecture combines an 8-bit STM8 core with dedicated peripheral resources and true data EEPROM. Its 16 MHz maximum clock rate provides sufficient processing bandwidth for control loops, user-interface scanning, communications, and low-complexity signal processing. At the same time, the 20-TSSOP package limits board footprint, making it practical for compact embedded products. Detailed pin-level functions and electrical limits should be confirmed against the manufacturer datasheet before layout release. Typical uses include appliance control, small industrial controllers, digital input and output modules, sensor interfaces, compact timers, and embedded communication nodes. The STM8S903F3P6 is particularly suitable when a design requires several serial interfaces alongside analog sensing but does not justify the software complexity or cost of a 32-bit MCU. Its integrated EEPROM is useful for retaining configuration data, calibration values, or counters without an external memory component. Designers should confirm the exact 20-TSSOP land pattern, pin multiplexing, oscillator connections, reset implementation, and peripheral pin assignments using the official datasheet. Decoupling and signal-integrity layout should follow the manufacturer recommendations, while software validation should include startup, clock configuration, ADC accuracy, timer behavior, and communications under expected bus loading. The broad 2.95 V to 5.5 V range does not remove the need to verify every peripheral and I/O condition at the minimum and maximum system voltages.

RFQ İletişim
STM8S903F3P6TR - 16MHz 8-Bit MCU | STMicroelectronics (Tape & Reel)
STM8S903F3P6TR

STM8S903F3P6TR - 16MHz 8-Bit MCU | STMicroelectronics (Tape & Reel)

STMicroelectronics STM8S903F3P6TR is an 8-bit STM8S-series microcontroller operating at up to 16 MHz, with 8 KB of Flash program memory and a 20-TSSOP package. The device operates from 2.95 V to 5.5 V and provides 1 KB of RAM, 640 bytes of true EEPROM, a 10-bit ADC, two timers, UART, SPI, and I²C connectivity. It is designed for compact embedded-control systems requiring mixed analog and digital functions without a higher-cost 32-bit MCU. An 8-bit microcontroller is a programmable semiconductor containing a processor core, nonvolatile program memory, data memory, and integrated peripherals. Within the hierarchy of embedded semiconductors, an MCU is below a microprocessor in processing capability but combines greater control simplicity with lower system cost and power use. The STM8S903F3 belongs to STMicroelectronics’ STM8S access line and targets cost-sensitive consumer, appliance, and industrial-control applications. Key features include 8 KB of Flash, 1 KB of RAM, and 640 bytes of EEPROM, allowing firmware, working data, and nonvolatile parameters to be consolidated in one device. The 10-bit ADC supports analog measurement, while two timers support timing and periodic control functions. UART, SPI, and I²C interfaces cover serial communication, sensor connectivity, and expansion to external ICs. The 2.95 V to 5.5 V supply range accommodates both 3.3 V and 5 V system environments. The STM8S903F3 architecture combines an 8-bit STM8 core with dedicated peripheral resources and true data EEPROM. Its 16 MHz maximum clock rate provides sufficient processing bandwidth for control loops, user-interface scanning, communications, and low-complexity signal processing. At the same time, the 20-TSSOP package limits board footprint, making it practical for compact embedded products. Detailed pin-level functions and electrical limits should be confirmed against the manufacturer datasheet before layout release. Typical uses include appliance control, small industrial controllers, digital input and output modules, sensor interfaces, compact timers, and embedded communication nodes. The STM8S903F3P6TR is particularly suitable when a design requires several serial interfaces alongside analog sensing but does not justify the software complexity or cost of a 32-bit MCU. Its integrated EEPROM is useful for retaining configuration data, calibration values, or counters without an external memory component. Designers should confirm the exact 20-TSSOP land pattern, pin multiplexing, oscillator connections, reset implementation, and peripheral pin assignments using the official datasheet. Decoupling and signal-integrity layout should follow the manufacturer recommendations, while software validation should include startup, clock configuration, ADC accuracy, timer behavior, and communications under expected bus loading. The broad 2.95 V to 5.5 V range does not remove the need to verify every peripheral and I/O condition at the minimum and maximum system voltages.

RFQ İletişim
STM8S903F3U3TR - 8-Bit 16MHz MCU, 8KB Flash | STMicroelectronics
STM8S903F3U3TR

STM8S903F3U3TR - 8-Bit 16MHz MCU, 8KB Flash | STMicroelectronics

The STMicroelectronics STM8S903F3U3TR is an 8-bit STM8S-series microcontroller with a 16 MHz clock, 8 KB of Flash program memory, 1 KB of RAM, and 640 bytes of EEPROM. It operates from 2.95 V to 5.5 V and provides 16 I/O ports in a 20-pin UFQFPN package with an exposed pad. The device also integrates a 10-bit ADC, two timers, UART, SPI, and I²C interfaces. An 8-bit microcontroller is a compact embedded-control component used to execute firmware, monitor inputs, and control outputs. The STM8S family belongs to the broader microcontroller and embedded-processing hierarchy, combining a CPU core, nonvolatile program memory, data memory, communications peripherals, and analog conversion functions in one package. The STM8S903 access line is aimed at small controllers that need useful connectivity and analog features without a higher-cost 32-bit architecture. The principal advantages of the STM8S903F3U3TR include its 16 MHz operating clock, 8 KB Flash capacity, 1 KB RAM, 640-byte EEPROM, 16 available I/O positions, and 2.95 V to 5.5 V supply range. These characteristics support compact control products that must combine serial communications, timed outputs, and analog measurement. Its RoHS-compliant construction also makes it suitable for designs managed under modern environmental material requirements. The device integrates separate communication and timing resources rather than relying entirely on external components. Two timers support periodic and timing-intensive control functions, while UART, SPI, and I²C interfaces allow connection to sensors, displays, memory devices, transceivers, and other embedded peripherals. The 10-bit ADC provides a practical interface for analog sensor inputs. Because this is an 8-bit architecture, firmware, interrupt handling, and signal-processing requirements should be evaluated against the limited arithmetic width of the STM8 core. Typical uses include compact motor controllers, appliance control panels, small sensor nodes, communications modules, industrial accessories, and low-cost embedded instruments. Its 20-pin UFQFPN format supports dense PCB layouts, while the exposed thermal pad provides a direct connection path for heat dissipation. Applications that require extensive protocol handling, large data storage, high-resolution conversion, or complex graphics should consider a more capable microcontroller family. PCB implementation requires careful decoupling and exposed-pad layout. Place the supply bypass capacitor close to the device power pins, route sensitive analog inputs away from fast-switching nodes, and use continuous ground-plane construction. Connect the exposed pad to the appropriate ground and thermal copper area using the manufacturer’s footprint and land-pattern guidance. Confirm all peripheral pin assignments against the pin-description table before final routing. This product page combines the verified device characteristics with package-level implementation guidance, lifecycle information, sourcing instructions, and a conservative evaluation of drop-in replacement options. It is intended to help engineers confirm electrical fit, interface availability, PCB compatibility, and application suitability before committing the STM8S903F3U3TR to a new design.

RFQ İletişim
STM8S903F3U6TR - 16MHz 8-Bit 8KB MCU | STMicroelectronics
STM8S903F3U6TR

STM8S903F3U6TR - 16MHz 8-Bit 8KB MCU | STMicroelectronics

The STMicroelectronics STM8S903F3U6TR is an 8-bit STM8S microcontroller rated for operation up to 16 MHz, with 8 KB of Flash program memory, 1 KB of RAM, and 640 bytes of integrated EEPROM. The device is supplied in a 20-pin UFQFPN package measuring 3 mm by 3 mm and operates from 2.95 V to 5.5 V. An 8-bit microcontroller is a compact embedded-processing component that combines a processor core, nonvolatile program memory, data memory, and peripherals on one integrated circuit. The STM8S family belongs to the broader hierarchy of microcontrollers, embedded processors, and semiconductor devices. It is intended for cost-sensitive control applications in which deterministic peripheral access, low power consumption, and simple tool-driven firmware development are more important than high computational throughput. The STM8S903F3U6TR includes a 10-bit ADC, 16 I/O ports, two timers, UART, SPI, and I²C interfaces. Its 8 KB Flash supports application firmware, while 1 KB of RAM provides working memory for control logic and data buffering. Integrated true data EEPROM of 640 bytes allows calibration values, configuration parameters, and other frequently changed data to be retained without an external memory component. The 3 mm by 3 mm UFQFPN package supports space-constrained board layouts. The device family combines an 8-bit STM8 architecture with a maximum 16 MHz clock and a 2.95 V to 5.5 V supply range. This operating range accommodates regulated 3.3 V and 5 V industrial or consumer systems. Its mixed-signal and serial-interface resources allow the MCU to acquire analog measurements and communicate with sensors, displays, converters, and external controllers without requiring several discrete interface components. Typical uses include compact industrial controllers, sensor-interface modules, motor and actuator controllers, communication equipment, consumer accessories, and low-cost embedded control panels. The 10-bit ADC is useful for monitoring analog inputs such as potentiometers, dividers, and sensors, while UART, SPI, and I²C support different levels of external connectivity. The small package also makes the MCU suitable for USB dongles, compact instruments, and densely populated control boards. PCB design should account for the exposed-pad thermal connection and place input and output decoupling capacitors close to the relevant supply pins. Firmware development requires an STM8-compatible toolchain and programming interface, while application code must be checked against the STM8S903F3 datasheet pin descriptions and electrical limits. The 16 MHz clock and 2.95 V to 5.5 V range should be used consistently when selecting oscillators, regulators, and communication peripherals. This page consolidates the key electrical, memory, package, interface, replacement, comparison, and design information for engineers evaluating the STM8S903F3U6TR. It also identifies where pin-level details, thermal design data, pricing, and lifecycle details require direct confirmation before production release.

RFQ İletişim
STM8S903K3B6 - 16MHz 8-Bit MCU with 8KB Flash | STMicroelectronics
STM8S903K3B6

STM8S903K3B6 - 16MHz 8-Bit MCU with 8KB Flash | STMicroelectronics

STMicroelectronics STM8S903K3B6 is an 8-bit STM8S-series microcontroller with a 16 MHz maximum clock, 8 KB Flash program memory, 1 KB RAM, 640 bytes EEPROM, and a 10-bit ADC in a 32-pin SDIP package. The device also provides 16 I/O ports, two timers, UART, SPI, and I²C interfaces for compact embedded control systems. Its operating supply range is 2.95 V to 5.5 V. A microcontroller is a programmable integrated circuit containing a CPU core, memory, and peripherals that execute firmware and interact with external hardware. The STM8S903K3 belongs to the STM8 access-line family, which combines an 8-bit core, integrated nonvolatile data EEPROM, and mixed-signal peripherals in a relatively small package. It is intended for cost-sensitive embedded products that need more capability than a basic logic controller without adopting a higher-performance 32-bit MCU. The STM8S903K3B6 provides 8 KB of Flash for program storage, 1 KB of RAM for working data, and 640 bytes of true EEPROM for parameter retention. Its 10-bit ADC supports analog measurements, while two timers support timing and periodic control functions. UART, SPI, and I²C provide three distinct communication paths for external sensors, actuators, displays, and serial peripherals. The 16 MHz clock enables predictable execution of control loops and interrupt-driven firmware. STMicroelectronics describes the STM8S903K3/F3 access line as an 8-bit MCU family offering 8 Kbyte Flash program memory and integrated true data EEPROM. The target device is identified by the STM8S903K3 ordering code and B6 package/temperature suffix. The verified product information specifies a 2.95 V to 5.5 V supply range, a 16 MHz clock, and an operating lifecycle status of ACTIVE. Typical uses include compact industrial controllers, sensor-interface modules, appliance controls, communication transceivers, low-cost instrumentation, and general-purpose embedded products. The combination of ADC, timers, EEPROM, and serial interfaces permits a single controller to acquire analog data, execute deterministic timing functions, preserve calibration values, and communicate with a host or peripheral device. Designers should budget PCB area for the 32-pin SDIP footprint and confirm that the selected schematic uses only functions and pin assignments supported by the exact STM8S903K3 variant. Power-supply decoupling, programming access, reset behavior, and analog-input conditioning should be validated against the manufacturer datasheet before layout release. Because the search excerpts do not provide the complete pin map, a new design must not infer pin assignments from a similarly named STM8 device. This page consolidates verified manufacturer and distributor specifications, lifecycle information, interface capabilities, and package details with selection guidance and practical design cautions. It also distinguishes confirmed same-package alternatives from candidates that require additional engineering verification, helping engineers avoid treating broadly similar MCUs as automatic drop-in replacements.

RFQ İletişim
STM8S903K3T6 - 8-bit MCU, 8KB Flash, 16MHz | STMicroelectronics
STM8S903K3T6

STM8S903K3T6 - 8-bit MCU, 8KB Flash, 16MHz | STMicroelectronics

The STM8S903K3T6 is an 8-bit microcontroller from STMicroelectronics' STM8S access line, featuring 8 Kbytes of Flash program memory, 1 Kbyte of RAM, and 640 bytes of true data EEPROM. It operates at a clock speed of 16 MHz and is supplied in a 32-pin LQFP package, offering a compact solution for a wide range of embedded control applications. An 8-bit microcontroller (MCU) is a single-chip computer with an 8-bit central processing unit (CPU), memory, and programmable input/output peripherals. It is the foundational building block in the hierarchy of embedded systems, sitting below 16-bit and 32-bit MCUs in processing power but offering lower cost, lower power consumption, and simpler programming. The STM8S903K3T6 belongs to the STM8S family, which is designed for general-purpose industrial and consumer applications, bridging the gap between simple 8-bit controllers and more complex 32-bit processors. Key features of the STM8S903K3T6 include a 10-bit analog-to-digital converter (ADC) with up to 7 multiplexed channels, two 16-bit timers, a UART for serial communication, an SPI interface, and an I2C interface. The device also integrates a true data EEPROM with read-while-write capability, enabling non-volatile data storage without external components. The supply voltage range of 2.95V to 5.5V allows operation from standard 3.3V and 5V power rails, making it versatile for mixed-voltage systems. The STM8S903K3T6 is built on ST's advanced 8-bit core architecture, which delivers up to 16 MIPS at 16 MHz, providing efficient execution of control algorithms. The integrated EEPROM and robust clock management, including an internal RC oscillator and optional external crystal, simplify system design by reducing external component count. The device also features low-power modes, including Active-Halt and Halt modes, to minimize energy consumption in battery-powered applications. Typical applications include industrial control systems, home automation, consumer electronics, and automotive body electronics. The combination of analog and digital peripherals, along with the wide operating voltage range, makes it suitable for sensor interfacing, motor control, and communication bridging tasks. The 32-pin LQFP package provides a good balance between I/O count and board space, supporting compact PCB layouts. When designing with the STM8S903K3T6, ensure proper decoupling of the VDD and VDDA pins with 100nF capacitors placed close to the device. The internal RC oscillator is accurate to ±1% over temperature, but for applications requiring precise timing, an external crystal can be connected to the OSC_IN and OSC_OUT pins. The device's EEPROM endurance is rated for 100,000 write/erase cycles, making it suitable for frequent data logging applications.

RFQ İletişim
STM8S903K3T6C - 16MHz 8-Bit MCU, 8KB Flash | STMicroelectronics
STM8S903K3T6C

STM8S903K3T6C - 16MHz 8-Bit MCU, 8KB Flash | STMicroelectronics

STMicroelectronics STM8S903K3T6C is a 16 MHz 8-bit microcontroller with up to 8 KB of Flash program memory, 1 KB of RAM, and 640 bytes of true data EEPROM in a 32-pin LQFP package. It integrates a 10-bit ADC, two timers, UART, SPI, and I²C interfaces for compact embedded control applications. An 8-bit microcontroller is a programmable semiconductor that executes instructions from embedded Flash memory and controls peripherals through dedicated input/output ports. The STM8S family uses an advanced Harvard-architecture core with an extended instruction set and a three-stage pipeline. This places the STM8S903K3 in the broader hierarchy of microcontroller, embedded processor, semiconductor, and electronic-control systems. Principal features include 16 MHz maximum clock frequency, a 10-bit analog-to-digital converter, two timers, and serial connectivity covering UART, SPI, and I²C. The device also provides true EEPROM for parameters that must survive power removal. Its 2.95 V to 5.5 V operating range supports both conventional 3.3 V and 5 V embedded systems, while 16 I/O ports provide flexible connections to sensors, displays, actuators, and interface transceivers. The STM8S903K3/F3 access-line architecture combines a compact control core with integrated communication peripherals. A three-stage pipeline supports efficient instruction execution, while the Harvard architecture separates program-memory access from data-memory access. Integrated EEPROM also avoids requiring an external nonvolatile memory device for small quantities of calibration, configuration, or serial-number data. Typical applications include small industrial controllers, sensor nodes, appliance interfaces, compact instrumentation, communication modules, and low-cost embedded products. The 10-bit ADC supports analog measurement, the timers support timing and periodic-output tasks, and UART, SPI, and I²C permit connection to displays, sensors, memory devices, transceivers, and other digital peripherals without excessive external glue logic. Designers should verify the exact peripheral mapping, alternate-function selection, clock configuration, and pin multiplexing in the manufacturer pin-description table before finalizing a PCB. Component values associated with the ADC, oscillator, reset, and power rails must follow the datasheet reference circuit, and unused pins should be configured to prevent unwanted inputs from increasing current consumption. This product guide combines the manufacturer’s device description with application-oriented engineering guidance, a parameter comparison, and practical design notes. It also provides sourcing information for requesting a quotation through the XAIPART Request a Quote form, including current lead-time and availability confirmation.

RFQ İletişim
STM8S903K3U3 - 16MHz 8-Bit MCU with 8KB Flash | STMicroelectronics
STM8S903K3U3

STM8S903K3U3 - 16MHz 8-Bit MCU with 8KB Flash | STMicroelectronics

The STMicroelectronics STM8S903K3U3 is an 8-bit STM8S access-line microcontroller with a 16 MHz clock, 8 Kbyte Flash program memory, 1 Kbyte RAM, and 640 bytes of true data EEPROM. It also provides a 10-bit ADC, two timers, UART, SPI, and I2C interfaces in a 32-pin UFQFPN package measuring 5 x 5 mm. An 8-bit microcontroller is a compact embedded-computing device that executes programmed instructions, reads inputs, controls outputs, and manages communication interfaces. Within the semiconductor hierarchy, the STM8S903K3U3 belongs to the STM8S family, the STM8 access line, the broader 8-bit microcontroller class, and the wider embedded-processing and power-management ecosystem. Its combination of mixed signal and serial connectivity makes it suitable for compact control systems rather than high-compute applications. The device provides 8 Kbyte of Flash for program storage, 1 Kbyte of RAM for working memory, and 640 bytes of true data EEPROM for parameters that must retain their values. The 10-bit ADC supports analog-to-digital measurements, while two timers support timing, periodic events, and basic input-capture or output-compare functions. UART, SPI, and I2C interfaces enable connection to sensors, displays, transceivers, memory devices, and other embedded peripherals. The operating supply range is 2.95 V to 5.5 V, supporting both 3.3 V and 5 V system architectures. Its 16 MHz maximum clock provides adequate execution bandwidth for control loops, protocol handling, and sequential logic. The device exposes 16 I/O ports and is offered in a compact 32-pin no-lead package with a 0.65 mm pitch, reducing board area while retaining a substantial pin count for mixed-signal and serial-interface designs. Typical applications include industrial sensor nodes, compact motor controllers, digital control panels, appliance interfaces, LED-control boards, and low-cost serial bridges. The STM8S903K3U3 is particularly useful where a design needs local analog measurement, nonvolatile configuration storage, and multiple serial buses without adopting a higher-pin-count or higher-cost microcontroller. PCB design should place the decoupling capacitor adjacent to the supply pins and route analog, digital, and clock signals with appropriate separation. Confirm the exact exposed-pad, ground, reset, clock, and I/O assignments from the manufacturer pinout and layout guidance before fabrication. This product page combines the manufacturer’s device information with a practical feature summary, application guidance, verified specifications, sourcing information, and a conservative replacement assessment that distinguishes true pin-compatible choices from merely similar devices.

RFQ İletişim
STM8S903K3U3TR - 16MHz 8-Bit MCU with 8KB Flash | STMicroelectronics (Tape & Reel)
STM8S903K3U3TR

STM8S903K3U3TR - 16MHz 8-Bit MCU with 8KB Flash | STMicroelectronics (Tape & Reel)

The STMicroelectronics STM8S903K3U3TR is an 8-bit STM8S access-line microcontroller with a 16 MHz clock, 8 Kbyte Flash program memory, 1 Kbyte RAM, and 640 bytes of true data EEPROM. It also provides a 10-bit ADC, two timers, UART, SPI, and I2C interfaces in a 32-pin UFQFPN package measuring 5 x 5 mm. An 8-bit microcontroller is a compact embedded-computing device that executes programmed instructions, reads inputs, controls outputs, and manages communication interfaces. Within the semiconductor hierarchy, the STM8S903K3U3TR belongs to the STM8S family, the STM8 access line, the broader 8-bit microcontroller class, and the wider embedded-processing and power-management ecosystem. Its combination of mixed signal and serial connectivity makes it suitable for compact control systems rather than high-compute applications. The device provides 8 Kbyte of Flash for program storage, 1 Kbyte of RAM for working memory, and 640 bytes of true data EEPROM for parameters that must retain their values. The 10-bit ADC supports analog-to-digital measurements, while two timers support timing, periodic events, and basic input-capture or output-compare functions. UART, SPI, and I2C interfaces enable connection to sensors, displays, transceivers, memory devices, and other embedded peripherals. The operating supply range is 2.95 V to 5.5 V, supporting both 3.3 V and 5 V system architectures. Its 16 MHz maximum clock provides adequate execution bandwidth for control loops, protocol handling, and sequential logic. The device exposes 16 I/O ports and is offered in a compact 32-pin no-lead package with a 0.65 mm pitch, reducing board area while retaining a substantial pin count for mixed-signal and serial-interface designs. Typical applications include industrial sensor nodes, compact motor controllers, digital control panels, appliance interfaces, LED-control boards, and low-cost serial bridges. The STM8S903K3U3TR is particularly useful where a design needs local analog measurement, nonvolatile configuration storage, and multiple serial buses without adopting a higher-pin-count or higher-cost microcontroller. PCB design should place the decoupling capacitor adjacent to the supply pins and route analog, digital, and clock signals with appropriate separation. Confirm the exact exposed-pad, ground, reset, clock, and I/O assignments from the manufacturer pinout and layout guidance before fabrication. This product page combines the manufacturer’s device information with a practical feature summary, application guidance, verified specifications, sourcing information, and a conservative replacement assessment that distinguishes true pin-compatible choices from merely similar devices.

RFQ İletişim
STM8S903K3U6 - 16MHz 8-Bit MCU with 8KB Flash | ST
STM8S903K3U6

STM8S903K3U6 - 16MHz 8-Bit MCU with 8KB Flash | ST

The STMicroelectronics STM8S903K3U6 is an 8-bit STM8S microcontroller with a 16 MHz clock, 8 KB of Flash program memory, 1 KB of RAM, 640 bytes of true EEPROM, and a 10-bit ADC in a 32-pin UFQFPN package measuring 5 x 5 mm. It operates from 2.95 V to 5.5 V and provides 16 I/O ports, two timers, UART, SPI, and I2C interfaces for compact embedded-control designs. An 8-bit microcontroller is a compact embedded-processing component designed around a simple central processing unit, program memory, working memory, and integrated peripherals. The STM8S family belongs to the broader hierarchy of microcontrollers, embedded processors, and semiconductors. Its combination of integrated Flash, true EEPROM, analog conversion, and serial interfaces makes it useful for cost-sensitive appliance control, industrial sensing, compact instrumentation, and low-to-moderate-speed communication equipment. Key features include 8 KB of Flash program memory, 1 KB of RAM, and 640 bytes of integrated true data EEPROM. The device supports a 16 MHz maximum clock and includes a 10-bit analog-to-digital converter, two timers, one UART, SPI, and I2C. Its operating voltage of 2.95 V to 5.5 V supports both 3.3 V and 5 V systems, while a temperature range of -40°C to +85°C covers common industrial and commercial environments. The STM8S903K3/F3 access-line architecture emphasizes performance, robustness, and reduced system cost. Flash permits in-system program storage, true EEPROM retains calibration or configuration data without external memory, and the ADC provides an economical path for analog measurement. The 32-pin UFQFPN package also offers fine-pitch external connectivity for sensors, actuators, displays, and communication transceivers, although its 0.5 mm pitch requires careful PCB assembly and inspection. Typical applications include sensor nodes, appliance controllers, compact industrial interfaces, low-speed data loggers, and embedded modules requiring UART, SPI, or I2C connectivity. Designers can connect analog inputs to the 10-bit ADC, use the timers for periodic measurement or output generation, and retain operating parameters in EEPROM. A UART bridge or level translator can extend the device into RS-232 or RS-485 systems. The primary design consideration is PCB implementation. A 32-pin UFQFPN package requires a land pattern capable of 0.5 mm pitch routing, adequate solder paste coverage, and careful control of thermal and electrical conditions. Firmware should also verify the device-specific reset behavior, clock configuration, peripheral mapping, and ADC calibration sequence against the manufacturer documentation before production. This page consolidates verified manufacturer specifications, distributor availability, procurement information, interface guidance, and same-footprint replacement analysis. It is intended to provide engineering context beyond a basic distributor listing while clearly identifying data that requires confirmation from the manufacturer datasheet.

RFQ İletişim
STM8S903K3U6TR - 16MHz 8-Bit MCU with 8KB Flash | ST (Tape & Reel)
STM8S903K3U6TR

STM8S903K3U6TR - 16MHz 8-Bit MCU with 8KB Flash | ST (Tape & Reel)

The STMicroelectronics STM8S903K3U6TR is an 8-bit STM8S microcontroller with a 16 MHz clock, 8 KB of Flash program memory, 1 KB of RAM, 640 bytes of true EEPROM, and a 10-bit ADC in a 32-pin UFQFPN package measuring 5 x 5 mm. It operates from 2.95 V to 5.5 V and provides 16 I/O ports, two timers, UART, SPI, and I2C interfaces for compact embedded-control designs. An 8-bit microcontroller is a compact embedded-processing component designed around a simple central processing unit, program memory, working memory, and integrated peripherals. The STM8S family belongs to the broader hierarchy of microcontrollers, embedded processors, and semiconductors. Its combination of integrated Flash, true EEPROM, analog conversion, and serial interfaces makes it useful for cost-sensitive appliance control, industrial sensing, compact instrumentation, and low-to-moderate-speed communication equipment. Key features include 8 KB of Flash program memory, 1 KB of RAM, and 640 bytes of integrated true data EEPROM. The device supports a 16 MHz maximum clock and includes a 10-bit analog-to-digital converter, two timers, one UART, SPI, and I2C. Its operating voltage of 2.95 V to 5.5 V supports both 3.3 V and 5 V systems, while a temperature range of -40°C to +85°C covers common industrial and commercial environments. The STM8S903K3/F3 access-line architecture emphasizes performance, robustness, and reduced system cost. Flash permits in-system program storage, true EEPROM retains calibration or configuration data without external memory, and the ADC provides an economical path for analog measurement. The 32-pin UFQFPN package also offers fine-pitch external connectivity for sensors, actuators, displays, and communication transceivers, although its 0.5 mm pitch requires careful PCB assembly and inspection. Typical applications include sensor nodes, appliance controllers, compact industrial interfaces, low-speed data loggers, and embedded modules requiring UART, SPI, or I2C connectivity. Designers can connect analog inputs to the 10-bit ADC, use the timers for periodic measurement or output generation, and retain operating parameters in EEPROM. A UART bridge or level translator can extend the device into RS-232 or RS-485 systems. The primary design consideration is PCB implementation. A 32-pin UFQFPN package requires a land pattern capable of 0.5 mm pitch routing, adequate solder paste coverage, and careful control of thermal and electrical conditions. Firmware should also verify the device-specific reset behavior, clock configuration, peripheral mapping, and ADC calibration sequence against the manufacturer documentation before production. This page consolidates verified manufacturer specifications, distributor availability, procurement information, interface guidance, and same-footprint replacement analysis. It is intended to provide engineering context beyond a basic distributor listing while clearly identifying data that requires confirmation from the manufacturer datasheet.

RFQ İletişim
STM8SPLNB1M6 - 16MHz DiSEqC Slave MCU | STMicroelectronics
STM8SPLNB1M6

STM8SPLNB1M6 - 16MHz DiSEqC Slave MCU | STMicroelectronics

The STMicroelectronics STM8SPLNB1M6 is an application-specific 8-bit STM8S microcontroller optimized for DiSEqC slave control in SaTCR-based LNB and switcher systems. It operates at up to 16 MHz and is packaged in a 20-pin SOIC measuring 0.295 inch, or 7.50 mm, in width. Its dedicated role is to manage satellite-bus control rather than general-purpose application processing. A DiSEqC slave controller is a microcontroller that responds to commands from a master receiver over the standardized DiSEqC bus. The STM8SPLNB1M6 integrates this application-specific control function with clock, reset, supply management, reduced-power operation, and safe power-on and power-off handling. It is therefore positioned between a conventional microcontroller and a fixed-function bus controller. Key characteristics include a maximum CPU frequency of 16 MHz, 3.3 V and 5 V operation as identified in product comparisons, and a 20-pin SOIC package. The device belongs to the STM8S family, uses the STM8 core and a CISC architecture, and is listed as ROMless for this application-specific configuration. The 20-pin package also allows a compact layout without requiring a high-pin-count package. The controller's value comes from its application-specific integration. Instead of assigning a general-purpose MCU to manage the bidirectional DiSEqC handshake, power control, and switcher support functions, a SaTCR receiver design can use a device optimized for that interface. Its 16 MHz processing headroom allows protocol handling and supervisory logic to coexist without a larger application processor. Typical uses include DiSEqC-controlled satellite LNB assemblies, multi-output switchers, and integrated receiver front ends that coordinate tuner, LNB, and switcher power sequencing. The part can also appear in receiver designs that require the master and slave ends of the DiSEqC interface to be implemented by dedicated microcontrollers rather than a single general-purpose controller. When laying out a design, treat the STM8SPLNB1M6 as a single-purpose satellite-bus controller rather than a conventional STM8 application MCU. Verify the exact pin assignments, oscillator requirements, programming interface, and supply sequencing against the manufacturer datasheet before routing the board, because those implementation details are not interchangeable with a general-purpose STM8S device merely because the package is identical. This page organizes the confirmed device identity, package information, application focus, and sourcing references for the STM8SPLNB1M6. It also distinguishes application-specific STM8S controllers from general-purpose STM8S devices so engineers can assess replacement risk, firmware dependencies, and the consequences of changing MCU families before committing a layout to production.

RFQ İletişim
STM8SPLNB1P6 - 16MHz 8-Bit DiSEqC MCU | STMicroelectronics
STM8SPLNB1P6

STM8SPLNB1P6 - 16MHz 8-Bit DiSEqC MCU | STMicroelectronics

The STMicroelectronics STM8SPLNB1P6 is an application-specific 8-bit STM8S-series microcontroller optimized for DiSEqC satellite LNB and switcher control, operating at up to 16 MHz in a 20-pin TSSOP package. The device includes 8 KB of Flash program memory, 640 bytes of EEPROM, and 1 KB of RAM for protocol handling, control logic, and satellite-set peripheral functions. A microcontroller is a programmable integrated circuit that combines a CPU core, memory, peripherals, and communication interfaces on one semiconductor die. The STM8S family belongs to the broader embedded-controller hierarchy: 8-bit microcontroller, embedded controller, semiconductor, and electronic component. Unlike a general-purpose microcontroller, the STM8SPLNB1P6 is application-specific and tailored to the low-speed, command-oriented interfaces used by DiSEqC satellite equipment. The headline features are a maximum clock frequency of 16 MHz, 8 KB of Flash memory, and a compact 20-pin TSSOP package. Its 1 KB RAM supports protocol state, timing, and control variables, while 640 bytes of EEPROM provide nonvolatile storage for configuration or calibration data. The specified operating-temperature range of -40°C to +85°C supports industrial and consumer satellite-access equipment. STMicroelectronics positions this device for DiSEqC slave applications in LNB and switcher systems. In this architecture, the MCU handles command recognition, timing, state management, and communication rather than performing high-bandwidth signal processing. The dedicated application focus can simplify firmware and board design compared with a general-purpose MCU whose unused peripherals add cost and design effort. Typical uses include DiSEqC-compatible LNB controllers, satellite switch controllers, dish positioning interfaces, and set-top receiver control boards. Designers should preserve the exact pin arrangement and peripheral mapping of the 20-pin TSSOP footprint, provide the required clock and decoupling arrangements, and confirm signal levels at the DiSEqC interface before production release. The main design trade-off is specialization. This MCU is appropriate when the board is centered on DiSEqC control and benefits from an integrated application profile, but it is less flexible than a larger general-purpose STM8 or STM32 device. Confirm memory requirements, interface voltage levels, timing, and firmware-toolchain support against the current STMicroelectronics datasheet. This page combines the exact device identity, package, memory, timing, and application information with practical selection guidance, engineering design notes, and verified sourcing links. It helps engineers determine whether the STM8SPLNB1P6 is appropriate for a DiSEqC slave design before requesting a quote and reviewing the manufacturer documentation.

RFQ İletişim
STMP3770XXBJEA2N - i.MX233/235 Audio/Video Decoder SoC | NXP
STMP3770XXBJEA2N

STMP3770XXBJEA2N - i.MX233/235 Audio/Video Decoder SoC | NXP

The NXP (formerly Freescale Semiconductor) STMP3770XXBJEA2N is a fifth-generation audio/video decoder SoC from the STMP3700 series, designed for portable media players, digital photo frames, and consumer multimedia appliances. It integrates an ARM926EJ-S CPU core with vector floating-point unit (VFP), hardware video decoding for H.264/MPEG-4/H.263/WMV9/VC-1 at D1 (720x480) resolution, and dedicated audio processing for MP3, WMA, AAC, Ogg Vorbis, and FLAC. The device is offered in a compact BGA package and is qualified for consumer-grade temperature operation. This particular MPN (XXBJEA2N) is a customer-specific suffix variant; full datasheets are available only to qualified customers under NXP NDA due to the device's use in commercial media-player products. What is an audio/video decoder SoC? An SoC (System-on-Chip) decoder is a highly integrated IC that combines a CPU, hardware video decoder, audio DSP, memory controller, peripheral interfaces, and power management in one package. SoC decoders occupy the third tier of the consumer multimedia hierarchy: general-purpose SoCs -> application-specific media SoCs -> STMP3700-family decoders. By consolidating decoding, processing, and I/O functions, these devices replace a discrete 4-6 chip set that would otherwise be required to build a portable player, reducing BOM cost and PCB area by 60-70%. Key features of the STMP3770XXBJEA2N include a hardware video pipeline supporting 720x480 D1 resolution at 30fps, a 32-bit LPDDR/DDR memory interface, integrated USB 2.0 HS OTG, NAND flash controller with ECC, I2S/PCM audio interfaces, and a 12-bit ADC for touch-screen/keypad support. The STMP3770 family also features an integrated Li-Ion battery charger and power-path management block. Architecturally, the device pairs the ARM926EJ-S host CPU (which runs the system kernel, file system, and user interface) with a dedicated media accelerator that offloads codec work. This heterogeneous compute approach yields long battery life in portable applications while delivering full-D1 video decode at low MHz - critical for thermal-limited, fanless enclosures. Typical applications include portable media players (PMP), digital photo frames, portable DVD players, GPS devices with video playback, e-book readers with audio, and connected home audio docks. Each application benefits from the integrated codec support and low-power operation. The STMP3700 series was a dominant SoC for low-cost media players from approximately 2009-2014. When designing with this part, note that source code, board support packages (BSP), and full datasheets are gated under NXP NDA; third-party BSPs (such as the Rockbox port) exist for hobbyist use. Designers should verify lead-time and minimum order quantities before committing to a new design because the part is in mature/end-of-life status. This page synthesizes distributor stock from DigiKey, Octopart, and JAK Electronics, cross-references available substitute listings, and consolidates practical design notes not found in a single manufacturer datasheet to help engineers and sourcing specialists make an informed decision.

RFQ İletişim
STPCC5HEBC - 133MHz x86 Set-Top Box SoC | STMicroelectronics
STPCC5HEBC

STPCC5HEBC - 133MHz x86 Set-Top Box SoC | STMicroelectronics

The STMicroelectronics STPCC5HEBC is an application-specific x86 system-on-chip for set-top boxes and television equipment, operating at 133 MHz and supplied in a 388-ball BGA package. Verified listings also identify external program memory, EBI/EMI, I2C, and IDE connectivity, while describing the device as a PC-compatible information-appliance SoC. These specifications position the component within the embedded processor and application-specific microcontroller hierarchy rather than the general-purpose microcontroller category. An application-specific system-on-chip integrates processor logic and application-oriented interfaces into one high-density device. Unlike a discrete CPU implementation, an SoC can reduce the number of supporting components and consolidate functions needed by set-top and information-appliance products. The STPCC5HEBC combines an x86-compatible processing core with interfaces associated with television and embedded storage systems, making it primarily relevant to legacy and specialized equipment designs. The most significant verified attributes are the 133 MHz operating frequency, x86 instruction-compatible core, 388-BGA package, external program-memory architecture, and support for EBI/EMI, I2C, and IDE. The external-memory arrangement permits program storage to be implemented outside the SoC, while the listed I2C and IDE interfaces support peripheral expansion and storage-controller connectivity. The 388-BGA format provides a high pin count for this mixed embedded platform. Technical interpretation should focus on architecture and board-level integration. Because the STPCC5HEBC is presented as an x86 set-top-box processor, software compatibility depends on the target operating environment and available external memory. Its 133 MHz clock is characteristic of an embedded information-appliance processor rather than a modern desktop CPU. Published source material available in the verified data does not provide complete electrical tables, memory dimensions, voltage ratings, or thermal limits, so those values must be confirmed from the original manufacturer documentation before design release. Typical uses include digital set-top boxes, television controllers, information appliances, and embedded systems that require an x86-compatible execution environment. I2C is useful for low-speed configuration and control peripherals, while IDE-style connectivity can support compatible storage or expansion hardware. External program memory allows system designers to separate executable storage from the processor package, though board routing and memory-controller compatibility remain critical. The principal design consideration is not to substitute the STPCC5HEBC for a modern MCU based only on its BGA package. Pin assignment, ball functions, supply rails, boot behavior, external-memory requirements, and interface voltage levels must be matched exactly to the original system design. Because no verified drop-in substitute was identified, replacement decisions should rely on complete manufacturer documentation rather than generic cross-reference results. This page consolidates the verified distributor and manufacturer-linked data for STPCC5HEBC and clearly separates confirmed facts from unavailable technical details. It also records sourcing, package uncertainty, commercial-data limitations, and the absence of a verified pin-to-pin replacement, providing engineers with a safer basis for legacy set-top-box and television system assessment.

RFQ İletişim
STPCI2GDYI - 120MHz x86 Graphics SoC | STMicroelectronics
STPCI2GDYI

STPCI2GDYI - 120MHz x86 Graphics SoC | STMicroelectronics

STMicroelectronics STPCI2GDYI is a 120 MHz x86-compatible graphics controller system-on-chip designed for embedded terminal and display systems, supplied in a 516-pin plastic BGA package. The device combines an x86 processor core with a 64-bit SDRAM unified-memory architecture, enhanced 2D graphics, VGA/SVGA CRT controller capability, a 135 MHz RAMDAC, video input processing, an up-scaler, video color-space conversion, and chroma color-key support. These features allow legacy display, video, and computer-oriented functions to be consolidated into one highly integrated terminal SoC. An x86-compatible system-on-chip is an application-specific semiconductor that combines a processor architecture with tightly coupled memory, graphics, and peripheral controllers. In the product hierarchy, STPCI2GDYI is an x86 graphics controller, microprocessor/MPU, system-on-chip, embedded processor, and integrated circuit. Its unified-memory design is significant because the CPU, graphics engine, and video subsystem can operate within a shared memory architecture rather than requiring a conventional separate display-memory interface. The verified product information identifies a 120 MHz x86 core, external program memory support, enhanced 2D graphics, VGA and SVGA output, a 135 MHz RAMDAC, and an integrated video pipeline. The 135 MHz RAMDAC value belongs to the graphics subsystem, while 120 MHz identifies the x86 processor operating frequency; these values describe different internal blocks and should not be interpreted as interchangeable clock specifications. The exact memory organization, I/O standards, electrical limits, operating-temperature range, and power ratings are not included in the supplied source data. STPCI2GDYI is positioned for embedded terminals, thin clients, point-of-sale systems, industrial operator interfaces, and other systems that require PC-compatible instruction-set support with integrated graphics and video capture. Its unified-memory architecture can simplify system design where display, capture, and processing tasks share data. Compared with a discrete CPU-plus-graphics implementation, consolidation can reduce board complexity, although the very large 516-pin BGA requires careful escape routing and a correspondingly complex PCB and assembly process. The most important design constraint is package complexity. A 516-pin BGA is not a hobbyist-scale footprint and normally demands multilayer PCB construction, fine-pitch escape routing, via-in-pad or microvia techniques where appropriate, and controlled reflow profiles. Designers must follow the manufacturer’s pinout, reference layout, power-supply, clock, memory, and graphics-interface requirements exactly; the supplied data does not expose the individual 516 pin assignments. This product page consolidates verified distributor and datasheet-index information, separates the 120 MHz processor clock from the 135 MHz RAMDAC clock, and distinguishes confirmed capabilities from parameters that still require datasheet verification. It also provides selection guidance, application analysis, procurement checks, and a structured view of the unusually large BGA package without inventing electrical specifications, lifecycle details, or drop-in replacements.

RFQ İletişim
STPCI2HEYC - 133 MHz x86 Terminal SoC | STMicroelectronics
STPCI2HEYC

STPCI2HEYC - 133 MHz x86 Terminal SoC | STMicroelectronics

STMicroelectronics STPCI2HEYC is a 133 MHz x86-compatible PC system-on-chip designed for terminals, graphics controllers, and embedded display systems, supplied in a 516-pin plastic BGA package. It combines a 64-bit bus architecture, a 64-bit DRAM controller, an integrated SVGA graphics controller, a 135 MHz RAMDAC, a video scaler, a digital PAL/NTSC encoder, a video input port, a CRT controller, and a PCI master interface. The part is also identified as the STPC Atlas x86 system-on-chip and is categorized as an application-specific microcontroller with external program memory. An x86-compatible system-on-chip is an integrated processor platform that consolidates a PC-compatible computing core and common peripheral controllers into one device. In the hierarchy of semiconductor solutions, STPCI2HEYC belongs to the x86 microprocessor family, within the broader embedded microprocessor and system-on-chip categories. Unlike a discrete industrial PC, a terminal-oriented SoC can consolidate graphics, video, memory control, and PCI host functionality into one high-pin-count package. This integration supports compact designs intended to drive displays, decode video, and communicate through a PCI-based system architecture. The primary electrical and functional highlights include a stated operating frequency of 133 MHz, a 64-bit internal bus architecture, external program-memory support, and integrated legacy display and video functions. The SVGA controller, 135 MHz RAMDAC, scan converter, and three-line flicker filter are particularly relevant to CRT-based terminal designs. The digital PAL/NTSC encoder expands support for composite video, while the video input and scaler support multimedia signal routing. The PCI master interface allows the SoC to operate as a bus master in a wider embedded platform. Technical selection is tightly coupled to legacy display architecture. The 516-BBGA package is large relative to modern mixed-signal and embedded processors, but it supports the extensive mixed-signal, memory, graphics, PCI, power, and ground connections expected from a PC-compatible terminal SoC. Designers must follow the manufacturer's pinout, reference design, power-supply requirements, memory configuration, and PCB layout guidance exactly. Because this package is not represented in the available SVG library and a complete verified 516-pin assignment is not supplied in the source data, no pin names or electrical limits have been inferred here. Typical uses include industrial terminal controllers, point-of-sale terminals, digital signage controllers, set-top-style appliances, and embedded systems requiring an x86 software environment with integrated graphics and PCI host capability. Its 133 MHz clock reflects a legacy PC-compatible architecture rather than a modern high-performance embedded processor. The integrated graphics and video blocks can reduce the need for separate display adapters in purpose-built equipment, although the complete board still requires carefully designed memory, video output, synchronization, and bus interfaces. The principal design consideration is that STPCI2HEYC is a highly application-specific legacy SoC rather than a general-purpose microcontroller. Board developers should preserve the reference platform's memory topology and signal timing, use supported external devices, and validate display compatibility before production. Procurement should also confirm availability, revision identity, and manufacturing status with the authorized distributor because the verified datasheet listing describes the component as obsolete. This page distinguishes documented capabilities from unavailable details and does not infer electrical characteristics or replacement parts that are not established by the supplied sources. This page consolidates the verified distributor, manufacturer-datasheet-index, and cross-reference search information for STPCI2HEYC, including its documented x86, graphics, video, memory, PCI, package, frequency, and pricing facts. It also identifies the critical engineering data that remains unavailable, preventing unsupported assumptions about pin assignments, power rails, operating temperature, compliance, lifecycle, and direct drop-in replacements.

RFQ İletişim
STR731FV2T6 - ARM7TDMI 32-bit MCU 256KB Flash | STMicroelectronics
STR731FV2T6

STR731FV2T6 - ARM7TDMI 32-bit MCU 256KB Flash | STMicroelectronics

The STMicroelectronics STR731FV2T6 is a 32-bit ARM7TDMI RISC microcontroller from the STR7 family operating at 36 MHz with 256 KB of embedded Flash program memory, housed in a 100-pin LQFP package (14x14 mm). It integrates a rich communications peripheral set including 3 CAN 2.0B interfaces, 4 UARTs, 2 SPIs, 2 I2C buses, USB full-speed, and a 12-channel 10-bit ADC. According to STMicroelectronics datasheet, the device delivers 32 MIPS at 36 MHz from a 5 V supply and offers 16 KB SRAM, 72 MHz maximum internal clock, and industrial-grade -40 C to +85 C operation. A microcontroller (MCU) is an integrated circuit that combines a processor core, program and data memory, timers, communication peripherals, and analog/digital interfaces on a single die. The STR731FV2T6 sits within the broader taxonomy of MCU -> 32-bit MCU -> ARM Cortex-M-class device (ARM7TDMI pre-dates Cortex-M) -> industrial communications MCU. It is designed for networked embedded systems where multiple fieldbuses and on-chip Flash simplify firmware updates in production. Key features include 256 KB single-bank Flash with 10,000-cycle endurance, 20-year data retention, 16 KB SRAM, 20 timers (16-bit and watchdog), real-time clock, JTAG and embedded ICE debug, and a 5 V-tolerant I/O ring. The 10-bit ADC offers 12 input channels and conversion speeds up to 1 us. The 100-pin LQFP package provides a 0.5 mm pitch and 14x14 mm footprint, suitable for industrial control and automotive gateway boards. Technically, the ARM7TDMI core uses a three-stage pipeline with a 32-bit ARM instruction set plus 16-bit Thumb instructions for code-density optimization. The triple-CAN controller operates independently with 11-bit and 29-bit identifier filtering, and the USB full-speed slave controller supports 12 Mbps with on-chip PHY. Industrial-grade EMC, ESD protection, and wide supply tolerance (4.5 V to 5.5 V) suit harsh environments requiring extended reliability. Typical applications include industrial fieldbus gateways (CANopen, DeviceNet), automotive body and gateway ECUs, building automation controllers, point-of-sale terminals, and USB-connected data acquisition devices. The combination of 3 CAN + USB + 4 UARTs makes it a true multi-protocol networking node. Design consideration: connect AGND and VSS pins separately at one point near the regulator to avoid ADC reference noise. The 100-pin LQFP requires a 4-layer PCB stack-up for clean CAN and USB signaling; keep 50 ohm controlled-impedance traces for the USB DP/DM pair. For boot from Flash, leave BOOT0/BOOT1 configured per the STR731 reference manual to avoid lockouts. This page synthesizes distributor pricing, drop-in pin-compatible alternatives, and practical design notes not found in the manufacturer datasheet.

RFQ İletişim
STR912FAW44X6 - ARM966E-S MCU 96MHz 512KB Flash LQFP-128
STR912FAW44X6

STR912FAW44X6 - ARM966E-S MCU 96MHz 512KB Flash LQFP-128

The STMicroelectronics STR912FAW44X6 is a 16/32-bit ARM966E-S RISC microcontroller operating up to 96 MHz, integrating 512 KB of dual-bank Flash and 96 KB SRAM, and packaged in a 128-pin LQFP. It is designed for embedded applications requiring on-chip Ethernet MAC, USB 2.0 Full-Speed, CAN, and AC motor control peripherals in a single ARM9-class device. An ARM9-based microcontroller is a 32-bit RISC processor with a Harvard architecture, vectored interrupts, and a rich peripheral set, suitable for real-time control and connected embedded systems. In the broader taxonomy, this device is a microcontroller (MCU) -> embedded MPU/MCU family -> ARM microcontroller -> ARM9 class, and it integrates tightly with power management ICs, sensors, and communication transceivers in a complete embedded node. Key features include 512 KB dual-bank Flash for in-field firmware updates, 96 KB SRAM, on-chip 10/100 Ethernet MAC, USB 2.0 Full-Speed with on-chip PHY, two CAN 2.0B controllers, four 16-bit timers, and a motor-control PWM unit. Industrial-grade peripherals include a 10-bit ADC, hardware crypto accelerator, and external memory bus. The LQFP-128 (14 x 14 mm) footprint supports surface-mount assembly with hand-solder-friendly leads. The device is built around the ARM966E-S core with a five-stage pipeline, single-cycle MAC, and tightly-coupled memory (TCM) interface, enabling deterministic interrupt response for real-time motor-control loops. Dual-bank Flash and a built-in bootloader support field firmware upgrades without external programmer. Typical applications include industrial automation controllers, point-of-sale terminals, security and surveillance systems, vending machines, communication gateways, and AC motor drives for appliance and HVAC equipment. The integrated Ethernet, USB, and CAN make it a single-chip node for connected industrial systems. When designing with this part, allocate proper decoupling near each VDD/VSS pair and observe the 1.8 V core / 3.3 V I/O supply sequencing. Plan for obsolete-status sourcing: ST has declared the STR91x family end-of-life, so new designs should evaluate the recommendation to migrate to STM32-class parts. This page synthesizes distributor pricing, drop-in alternative MPNs, and practical design notes not found in a single datasheet or distributor page.

RFQ İletişim