Ürünler (21.000+)

XMC4402F100F256BAXQMA1 - 120MHz Cortex-M4 256KB Flash LQFP-100 | Infineon
XMC4402F100F256BAXQMA1

XMC4402F100F256BAXQMA1 - 120MHz Cortex-M4 256KB Flash LQFP-100 | Infineon

The Infineon XMC4402F100F256BAXQMA1 is a 32-bit ARM Cortex-M4 microcontroller operating at 120 MHz, with 256 KB of flash memory and an Ethernet MAC in a 100-pin PG-LQFP package. It combines a single-cycle DSP multiply-accumulate and floating-point unit with 8-channel DMA and dedicated USB and Ethernet DMA resources for data-intensive industrial embedded systems. The XMC4000 family belongs to the industrial microcontroller segment, combining an Arm Cortex-M4 processor with Infineon peripherals designed for real-time control and connected automation. The operating voltage range is 3.13 V to 3.63 V, and the device supports USB 2.0 full-speed on-the-go. Its 120 MHz Cortex-M4 core is suitable for motor-control, industrial communication, measurement, and embedded networking applications. Key features include a high-resolution PWM unit with 150 ps resolution, a 120 MHz CPU frequency, 256 KB of flash, and dedicated DMA channels for USB and Ethernet. These resources reduce CPU intervention in data-transfer-intensive designs and support deterministic control loops where predictable timing is more important than maximum general-purpose performance. The Ethernet MAC enables connected industrial equipment using standard network infrastructure. The XMC4402F100F256BAXQMA1 is supplied in a 100-pin LQFP package with an exposed-pad variant indicated by the manufacturer ordering information. The package provides a conventional leaded footprint for industrial control boards and simplifies assembly where fine-pitch BGA packages are undesirable. The device is specified for industrial applications and is identified as part of Infineon's XMC4000 microcontroller portfolio. Typical applications include industrial Ethernet controllers, servo and motor-control systems, PLC peripherals, factory automation nodes, sensor gateways, and USB-connected measurement equipment. Designers should confirm startup, clock, and memory configuration against the XMC4400 family documentation and use the manufacturer's pin-description tables when assigning PCB nets. This page consolidates the manufacturer product listing, distributor technical summaries, family-level alternatives, and practical design guidance. It also highlights where different XMC4000 derivatives differ in flash capacity, temperature-grade ordering codes, or package-related ordering details so engineers can shortlist the correct device before schematic capture.

RFQ İletişim
XMC4402F100K256ABXQSA1 - 120MHz Cortex-M4 MCU | Infineon
XMC4402F100K256ABXQSA1

XMC4402F100K256ABXQSA1 - 120MHz Cortex-M4 MCU | Infineon

Infineon Technologies XMC4402F100K256ABXQSA1 is a 32-bit Arm Cortex-M4 microcontroller in the XMC4000 industrial series, operating at up to 120 MHz with 256 KB of Flash memory and 80 KB of SRAM. The device is packaged in a 100-pin LQFP with exposed pad, identified as PG-LQFP-100-11, and is supplied in tray packaging according to the ordering information. It is designed for embedded control systems that combine real-time processing, Ethernet connectivity, and a broad set of industrial peripherals. An Arm Cortex-M4 microcontroller is a 32-bit reduced-instruction-set processor core widely used in embedded control, industrial automation, communications, and connected equipment. The XMC4000 family combines the Cortex-M4 core with memory, timing, serial, digital, analog, and Ethernet-related resources on one integrated circuit. This integration allows an industrial controller to handle control loops, communication tasks, and supervisory logic without requiring several discrete processors. The XMC4402F100K256ABXQSA1 provides 256 KB of Flash for program storage, 80 KB of SRAM for working memory, a maximum clock frequency of 120 MHz, and Ethernet support according to the Infineon product page. Its 32-bit architecture supports efficient handling of multiple I/O tasks, while the 100-pin LQFP exposed-pad package provides a high pin count for external interfaces and a thermal path for improved heat dissipation. The 3.3 V operating voltage is stated in the product listing. The device is suitable for industrial automation controllers, networked sensors, motor-control supervisory systems, building automation equipment, and industrial communications equipment. Ethernet is particularly useful when the controller must exchange real-time status, configuration, or process data with supervisory systems. The 256 KB Flash capacity is appropriate for firmware, protocol stacks, and application code, while 80 KB of SRAM supports buffering and time-critical execution. Designers should treat the exposed pad as a thermal and electrical land-pattern feature and follow the manufacturer land-pattern guidance when placing the device on a multilayer PCB. Decoupling should be placed directly at the supply pins, and the 120 MHz operating mode requires careful clock, reset, and signal-routing discipline. Firmware must also account for the exact peripheral assignments, clock configuration, startup behavior, and peripheral limits defined by the Infineon documentation for this ordering code. This page summarizes the principal orderable-device characteristics and distinguishes the exact XMC4402F100K256ABXQSA1 configuration from related XMC family members. Engineers should compare peripheral mix, memory size, qualification, package, and software compatibility before approving any substitution. Use the Infineon product page and datasheet for the definitive pin description, electrical limits, exposed-pad layout, and configuration details.

RFQ İletişim
XMC4402F100K256BAXQMA1 - 120MHz Cortex-M4 | Infineon
XMC4402F100K256BAXQMA1

XMC4402F100K256BAXQMA1 - 120MHz Cortex-M4 | Infineon

Infineon Technologies XMC4402F100K256BAXQMA1 is a 32-bit Arm Cortex-M4 industrial microcontroller operating at 120 MHz, with 256 KB of flash memory, 80 KB of SRAM, and Ethernet connectivity in a 100-pin PG-LQFP exposed-pad package. The device combines deterministic timer performance with a high-resolution PWM unit offering 150 ps resolution, making it suitable for precise motor, power conversion, and industrial control systems. An MCU is a semiconductor that integrates a processor core, memory, peripherals, and interfaces into one device used to control equipment. The XMC4400 family belongs to the hierarchy of embedded processor, microcontroller, 32-bit microcontroller, and industrial microcontroller. Infineon positions the XMC4402 for mixed-signal and timer-driven applications where deterministic control, networking, and real-time peripheral performance are important. Key features include a 120 MHz Arm Cortex-M4 processor, 256 KB of program flash, and 80 KB of SRAM. Its Ethernet MAC supports connected industrial equipment, while the high-resolution PWM capability supports precision actuator and power-control tasks. The PG-LQFP-100 package exposes 100 terminals and includes an exposed pad for board-level thermal management. Operating voltage is identified as 3.3 V in distributor product information. The XMC4400 architecture integrates the Cortex-M4 processing core with Infineon peripherals intended for industrial real-time control. Its timer and PWM resources can generate high-resolution edge timing, improving resolution in motor drive, digital power conversion, and mixed-signal feedback loops. The 256 KB flash allocation provides space for application code and configuration data, while 80 KB of SRAM supports working memory, diagnostics, and control-loop calculations. Typical applications include industrial motor controllers, servo drives, programmable power supplies, PLC communication modules, industrial Ethernet equipment, and precision sensor-control platforms. In these systems, the MCU can execute control algorithms while using its Ethernet MAC for supervisory communication and its PWM peripherals for accurate actuator or converter timing. PCB implementation should follow the manufacturer package footprint, land pattern, and pin-assignment tables. Decoupling, analog and digital supply routing, clock stability, exposed-pad thermal design, and high-speed signal layout require careful review. Because the LQFP package has 100 fine-pitch leads, assembly quality and solder-joint inspection are especially important. This product record combines the manufacturer family positioning, verified distributor specifications, same-footprint alternatives, and practical selection guidance for engineers evaluating the XMC4402F100K256BAXQMA1 for industrial embedded-control designs.

RFQ İletişim
XMC4402F100K256BAXUMA1 - 120MHz Cortex-M4 MCU | Infineon
XMC4402F100K256BAXUMA1

XMC4402F100K256BAXUMA1 - 120MHz Cortex-M4 MCU | Infineon

Infineon Technologies XMC4402F100K256BAXUMA1 is a 32-bit Arm Cortex-M4 microcontroller in the XMC4000 family, operating at 120 MHz with 256 kByte of embedded flash and 80 kByte of SRAM. The device includes Ethernet connectivity and is packaged in a PG-LQFP-100-25 surface-mount package. Its industrial designation identifies the XMC4402-F100K256-BA device variant, while the XAIPART ordering code denotes the qualified supplier packing configuration. A microcontroller is a semiconductor integrated circuit that combines a processor core, embedded memory, peripherals, and communication interfaces on one device. The Arm Cortex-M4 core places this XMC4000 part in the 32-bit embedded-controller hierarchy, where it supports real-time control, communications, and industrial automation. Compared with a general-purpose microprocessor, the MCU integrates dedicated peripherals and deterministic control resources close to the CPU, reducing system complexity and allowing firmware to execute directly from embedded flash. The principal features of this MCU include a 120 MHz Cortex-M4 processor, 256 kByte of flash memory, and 80 kByte of SRAM. Its Ethernet interface expands the device beyond a basic real-time controller, enabling connected industrial equipment, network gateways, and embedded control nodes. The 100-pin LQFP package provides a high pin count suitable for mixed-signal, communication, and industrial peripheral requirements while retaining a familiar leaded surface-mount assembly format. Architecturally, the Cortex-M4 processor supports efficient 32-bit computation and the exception-based control model used by embedded Arm Cortex-M devices. Integrating flash and SRAM allows substantial control code and working data to remain on-chip. The Ethernet capability creates a bridge between real-time control functions and network communication, allowing status information, commands, and diagnostic data to be exchanged without requiring a separate network controller in designs where appropriate. Typical uses include industrial Ethernet controllers, factory automation equipment, networked sensor hubs, motor and motion-control systems, communications equipment, and embedded gateways. The combination of 120 MHz processing performance and Ethernet is particularly useful when control tasks must coexist with network protocol handling. In such systems, the MCU can sample process inputs, execute deterministic control logic, and exchange operational data through the integrated Ethernet interface. PCB design should follow the Infineon pin-description and package information, paying particular attention to power-supply pins, ground distribution, high-speed Ethernet routing, and external-component placement. Keep the Ethernet differential pair geometry consistent, provide the required decoupling close to the device, and confirm unused-pin treatment directly against the manufacturer pin table before fabrication. Firmware development also requires the correct XMC4400-family device configuration, startup files, and peripheral library support for the selected silicon revision. This product page consolidates the verified manufacturer identity, exact MPN ordering information, core memory capacity, processor speed, Ethernet capability, package details, drop-in candidates, application guidance, and engineering comparison points. It supports faster component selection while directing design validation back to the manufacturer documentation for final pin assignments, timing, electrical limits, and lifecycle decisions.

RFQ İletişim
XMC4402F64F256ABXQMA1 - 120MHz Cortex-M4 256KB Flash MCU
XMC4402F64F256ABXQMA1

XMC4402F64F256ABXQMA1 - 120MHz Cortex-M4 256KB Flash MCU

The Infineon XMC4402F64F256ABXQMA1 is a 32-bit single-core ARM Cortex-M4 microcontroller operating at 120 MHz, with 256 kByte of flash memory, 80 kByte of SRAM, and 10/100 Ethernet connectivity in a 64-pin PG-LQFP-64-19 package with an exposed pad. It belongs to the Infineon XMC4000 series for industrial applications and combines real-time microcontroller control with an integrated Ethernet interface. A microcontroller is a programmable system-on-chip containing a CPU core, memory, peripherals, and communication interfaces. Within the product hierarchy, this device is an ARM Cortex-M4 microcontroller, an embedded processor, an integrated circuit, and ultimately a semiconductor. The XMC4000 family is designed for industrial control systems where deterministic execution, Ethernet connectivity, and a relatively large embedded memory footprint are more important than the power density of a small sensor node. Three headline characteristics define this part. The 120 MHz Cortex-M4 core provides 32-bit processing with integrated floating-point instruction support. The 256 kByte program flash supplies room for a bootloader, application firmware, and network configuration, while 80 kByte of SRAM supports working buffers, protocol stacks, and control data. The integrated 10/100 Ethernet interface allows the controller to participate directly in industrial Ethernet networks without a separate interface controller. The XMC4402F64F256ABXQMA1 is identified as an industrial-grade XMC4000-series member. Its PG-LQFP-64-19 mechanical format provides 64 leads plus a thermal exposed pad, offering a larger pin count than small-outline packages and practical access to mixed-signal, communications, and digital I/O resources. The verified distributor listing confirms single-core operation, 120 MHz clocking, 256 kByte flash, and 3.3 V supply information. Additional detailed timing, peripheral, and absolute-maximum parameters must be confirmed in the manufacturer datasheet before a new design is released. Typical applications include industrial Ethernet controllers, programmable logic controllers and automation equipment, networked motor and process controllers, industrial communication gateways, and embedded test systems. For Ethernet-connected control equipment, the combination of Cortex-M4 processing, 80 kByte SRAM, and integrated 10/100 Ethernet reduces the external component count compared with a discrete Ethernet-interface architecture. Engineers should still budget memory margin for the selected protocol stack and application firmware. The most important design consideration is thermal management around the exposed pad. The LQFP package requires a land pattern that connects the thermal pad to a properly sized ground or thermal copper plane; a datasheet-based thermal design should verify the junction and ambient temperature limits under the maximum operating clock and Ethernet activity. The 3.3 V operating point should also be checked against every attached peripheral, level-shifting interface, and supply tolerance. This page combines the verified Infineon and distributor specifications with practical selection guidance, pin-package details, application analysis, and same-package replacement information that is not normally consolidated on a distributor listing. It distinguishes documented facts from parameters that still require confirmation from the manufacturer datasheet, helping engineers evaluate the XMC4402F64F256ABXQMA1 efficiently without treating unverified generic MCU specifications as fact.

RFQ İletişim
XMC4402F64F256BAXQMA1 - 120MHz Cortex-M4 MCU | Infineon
XMC4402F64F256BAXQMA1

XMC4402F64F256BAXQMA1 - 120MHz Cortex-M4 MCU | Infineon

Infineon XMC4402F64F256BAXQMA1 is an industrial 32-bit Arm Cortex-M4 microcontroller operating at up to 120 MHz, with 256 kByte of flash memory, 80 kByte of SRAM, and 10/100 Ethernet connectivity in a PG-LQFP-100-25 package. It combines a high-performance 32-bit processor core with an Ethernet interface, high-resolution PWM, and an extensive peripheral set for industrial control applications. An industrial microcontroller is a semiconductor device designed to execute embedded control logic, communicate with external equipment, and operate reliably in industrial environments. The XMC4000 family combines the Arm Cortex-M4 processor architecture with Ethernet, timers, analog and digital interfaces, and embedded flash and SRAM. This places it within the hierarchy of embedded processor, microcontroller, industrial control IC, and semiconductor. The XMC4402F64F256BAXQMA1 provides 256 kByte of flash for program storage and 80 kByte of SRAM for working memory. Its processor operates at up to 120 MHz, while the high-resolution PWM unit offers 150 ps resolution for precision timing and motor-control tasks. Integrated 10/100 Ethernet support reduces the component count required for network-connected industrial equipment. The Arm Cortex-M4 architecture supports efficient real-time control while retaining a broad embedded software ecosystem. Peripheral resources such as high-resolution PWM, communication interfaces, and Ethernet position the device for motor control, industrial networking, automation controllers, and connected embedded systems. The 150 ps PWM resolution is particularly useful when the application depends on accurate edge positioning rather than only a conventional timer period. Typical uses include EtherCAT or Ethernet-based factory automation equipment, servo and motor-control systems, industrial communication gateways, programmable logic controllers, and networked sensor-control modules. For designs requiring a 3.3 V operating rail, the device can support a compact controller architecture while combining local real-time processing with Ethernet connectivity. Designers should follow the manufacturer’s pin, power, decoupling, clock, and exposed-pad guidance when laying out the PG-LQFP-100-25 package. The exposed thermal pad requires a properly designed land pattern and thermal-via arrangement if heat must be removed from the device. Firmware should also validate the selected clock, Ethernet physical interface, and peripheral pin multiplexing before production release. This product record combines the manufacturer’s XMC4402-F64F256-BA characteristics with orderable MPN context, useful application guidance, and explicit design cautions. It helps engineers distinguish confirmed memory, connectivity, package, and timing attributes from details that must be checked in the manufacturer datasheet before schematic or PCB signoff.

RFQ İletişim
XMC4402F64K256ABXQSA1 - 120MHz Cortex-M4 MCU | Infineon
XMC4402F64K256ABXQSA1

XMC4402F64K256ABXQSA1 - 120MHz Cortex-M4 MCU | Infineon

Infineon Technologies XMC4402F64K256ABXQSA1 is a 32-bit single-core Arm Cortex-M4 microcontroller operating at 120 MHz, with 256 KB of programmable Flash memory and a 64-pin PG-LQFP-19 package with exposed pad. It belongs to the XMC4000 industrial microcontroller family and includes an Ethernet MAC rated for 10/100 communication. The 256K × 8 Flash organization provides dedicated code and data storage for connected industrial-control equipment. An Arm Cortex-M4 microcontroller is a 32-bit embedded processor based on the Armv7-E architecture. Microcontrollers integrate a processor core, Flash memory, SRAM, interrupt control, timers, communication peripherals, and general-purpose I/O into one device. Within the semiconductor hierarchy, this MCU belongs to the embedded-microcontroller category and provides a compact platform for industrial automation, networking, motor control, and real-time control systems. The principal device characteristics visible in manufacturer and distributor records include a 120 MHz Cortex-M4 core, 256 KB Flash memory, 32-bit architecture, single-core operation, and a 64-pin LQFP package. The Ethernet capability makes the device suitable for connecting embedded equipment to 10/100 networks. Its package also includes an exposed thermal pad intended to improve heat transfer from the device to the PCB. The XMC4000 architecture combines real-time control capability with Ethernet connectivity. A 120 MHz Cortex-M4 core can execute control logic and communication tasks, while integrated peripherals reduce the need for discrete interface components. Designers should consult the XMC4402 datasheet and device pin-description tables for the exact peripheral mix, RAM configuration, I/O assignments, electrical limits, clock requirements, and package dimensions before finalizing a PCB. Typical uses include industrial Ethernet controllers, factory automation nodes, building automation equipment, networked sensors, motor-control systems, and communications gateways. These applications benefit from the combination of embedded Flash, a high-frequency 32-bit core, and 10/100 Ethernet MAC support. Exact protocol availability and performance should be confirmed against the selected order code and its manufacturer documentation. PCB implementation requires careful decoupling, a correctly configured clock network, and unobstructed thermal coupling to the exposed pad. Follow the manufacturer reference layout, place required capacitors close to their supply pins, route high-speed signals according to the recommended guidelines, and verify the assembled design across voltage and temperature limits. This page combines manufacturer identification, distributor specifications, strict package-aware substitution guidance, application analysis, and practical design notes. It is intended to help engineers evaluate the XMC4402F64K256ABXQSA1 for an existing 64-LQFP industrial design before obtaining detailed electrical and pin-level documentation.

RFQ İletişim
XMC4402F64K256BAXQMA1 - 120MHz Cortex-M4 MCU | Infineon
XMC4402F64K256BAXQMA1

XMC4402F64K256BAXQMA1 - 120MHz Cortex-M4 MCU | Infineon

Infineon Technologies XMC4402F64K256BAXQMA1 is a 32-bit ARM Cortex-M4 industrial microcontroller with a 120 MHz core, 256 KB of flash memory, and a 64-pin LQFP package. The XMC4000-series device combines real-time control capability with an integrated 10/100 Ethernet MAC, high-resolution PWM, and an extended peripheral set for industrial automation, networking, motor-control, and embedded communications systems. A microcontroller is a compact semiconductor system that integrates a CPU core, program memory, data memory, peripherals, and communication interfaces on one package. The ARM Cortex-M4 architecture belongs to the microcontroller class and provides deterministic instruction execution, DSP-oriented instructions, and hardware floating-point support. The XMC4400 family extends this foundation with Infineon peripherals designed for industrial real-time control and connected equipment. The XMC4402F64K256BAXQMA1 operates at 120 MHz and provides 256 KB of flash organized as 256K x 8. Its high-resolution PWM unit offers a stated resolution of 150 ps, supporting precise timing-sensitive power conversion and motor-control systems. The integrated Ethernet MAC adds 10/100 communications capability without requiring a separate interface controller. The device is identified as an industrial-grade member of the XMC4400 family. The XMC4400 architecture integrates multiple peripheral domains suited to deterministic embedded control. Its communication and timing resources can support industrial Ethernet, while the high-resolution PWM and fast-control peripherals reduce reliance on software timing loops. The 256 KB embedded flash provides room for bootloader, application, and configuration code, while the Cortex-M4 processor supports efficient signal-processing and control workloads. Typical uses include industrial PLC peripheral modules, factory automation controllers, Ethernet-connected data acquisition equipment, variable-frequency motor drives, power-conversion controllers, building automation nodes, and real-time communication gateways. For designs requiring a deterministic Ethernet connection, the integrated 10/100 Ethernet MAC can be paired with a suitable Ethernet transceiver and magnetic interface. Designers should verify the complete pin-level electrical configuration, exposed-pad connection, clock requirements, memory organization, and peripheral multiplexing against the official Infineon documentation before layout release. The LQFP-64 land pattern must follow the manufacturer package drawing, and decoupling should be placed close to the supply pins. Firmware should also validate reset, clock, Ethernet PHY, and startup sequencing for the selected board design. This page combines verified manufacturer and distributor information with an honest engineering comparison, practical integration guidance, and clearly identified data gaps. It distinguishes confirmed XMC4400-family capabilities from unverified details so procurement and hardware teams can evaluate the MCU without relying on invented specifications or unsafe replacement assumptions.

RFQ İletişim
XMC4500-F144F1024AB - 120MHz Cortex-M4 MCU | Infineon
XMC4500-F144F1024AB

XMC4500-F144F1024AB - 120MHz Cortex-M4 MCU | Infineon

The Infineon XMC4500-F144F1024AB is a 32-bit ARM Cortex-M4 microcontroller in the XMC4000 family, operating at 120 MHz with 1 MB of flash memory and 160 kByte of SRAM. The device is packaged in a 144-pin PG-LQFP-18 industrial package and is intended for connected industrial control, industrial Ethernet, power conversion, and sense-and-control systems. Its combination of Ethernet connectivity, configurable peripherals, and deterministic microcontroller processing supports compact embedded platforms that need communications and control in one device. An ARM Cortex-M4 microcontroller is a reduced-instruction-set processor-based embedded controller used for real-time control, communications, and signal-processing tasks. The XMC4000 family combines a standard ARM processor core with Infineon peripherals for industrial connectivity, control, and power-management designs. This makes the XMC4500 suitable when a system needs more than a basic GPIO controller, especially where Ethernet and deterministic control must share one microcontroller platform. The verified product information identifies a 120 MHz operating frequency, 1 MB flash, 160 kByte SRAM, Ethernet connectivity, and a 144-pin PG-LQFP-18 package. The family description also identifies configurable peripherals, allowing application-specific tailoring. The 1 MB flash provides room for networking stacks, control software, diagnostics, and application logic, while the 160 kByte SRAM supports working memory for protocol and control tasks. The XMC4500 is positioned for industrial communication and control applications where an Ethernet-capable MCU can reduce component count by integrating network communication with local control. The Cortex-M4 architecture provides a familiar embedded software ecosystem, while the family peripheral set is designed for industrial connectivity, power conversion, and sense-and-control use cases. Exact electrical limits, pin functions, timing values, and temperature limits require the Infineon XMC4500 datasheet. Typical applications include industrial Ethernet gateways, programmable automation controllers, motor and power-conversion control, industrial sensor nodes, and connected measurement equipment. For designs requiring deterministic response, the MCU can process local control loops while Ethernet handles supervisory communication, diagnostics, and configuration. The verified data does not provide a complete application-specific peripheral map for this exact orderable MPN, so firmware engineers should verify pin multiplexing and peripheral availability in the manufacturer datasheet before schematic capture. A key design consideration is package and firmware verification. The target is a 144-pin industrial package, so PCB land patterns, exposed-pad or thermal requirements, pin multiplexing, clock configuration, and power sequencing must be checked against the exact datasheet. This page synthesizes the verified manufacturer and distributor information, available cross-reference results, package identity, application context, and engineering guidance; missing orderable-specific data is explicitly marked rather than estimated. The Infineon XMC4500-F144F1024AB is a 120 MHz ARM Cortex-M4 industrial microcontroller with Ethernet, 1 MB flash, 160 kByte SRAM, and a 144-pin PG-LQFP-18 package.

RFQ İletişim
XMC4500-F144K1024 - 120MHz Cortex-M4 1MB Flash MCU | Infineon
XMC4500-F144K1024

XMC4500-F144K1024 - 120MHz Cortex-M4 1MB Flash MCU | Infineon

The Infineon XMC4500-F144K1024 is a 32-bit ARM Cortex-M4 microcontroller in the XMC4000 series, combining a 120 MHz processor core with 1024 kByte of embedded flash and 160 kByte of SRAM in a 144-pin PG-LQFP package. Industrial connectivity microcontrollers such as the XMC4500 sit between general-purpose embedded processors and highly specialized control devices. They combine an Arm Cortex-M4 instruction set with configurable peripherals for communications, timing, analog conversion, and industrial control, allowing one controller to supervise power conversion, sensing, fieldbus communication, and safety-related monitoring functions. The XMC4500 integrates Ethernet connectivity alongside the XMC4000 peripheral family, and its 1024 kByte of flash supports larger protocol stacks, application firmware, and field-upgrade capability than smaller 32-bit microcontrollers. The 160 kByte of SRAM provides working memory for packet buffers, control loops, and communication tasks. The 144-pin PG-LQFP-18 package provides a substantial peripheral count and power-management connectivity for industrial control boards. According to the manufacturer datasheet, the XMC4500 series targets industrial connectivity, industrial control, power conversion, and sense-and-control systems. Its configurable peripheral set allows designers to tailor the controller to application requirements instead of relying on a fixed combination of unused functions. The 120 MHz Cortex-M4 core and integrated Ethernet interface make the device suitable for connected motor controllers, power-conversion equipment, and industrial automation gateways. Designers should pay attention to the exact ordering suffix, flash density, package type, and temperature-grade requirements when comparing XMC4500 variants. The verified distributor listings identify the related -AC, -AB, and -AA order codes, while the manufacturer documentation provides the authoritative electrical and ordering details. For the target suffix, confirm the package pin count, exposed-pad connections, and production availability before layout release. This page consolidates manufacturer datasheet links, distributor records, package information, and practical selection guidance for the XMC4500-F144K1024. It highlights where related XMC4500 order codes are useful references and where a PCB redesign is required, helping engineers evaluate drop-in replacement risk before committing a new design.

RFQ İletişim
XMC4500E144F1024ACXQSA1 120MHz Cortex-M4 1MB MCU
XMC4500E144F1024ACXQSA1

XMC4500E144F1024ACXQSA1 120MHz Cortex-M4 1MB MCU

Infineon Technologies XMC4500E144F1024ACXQSA1 is an industrial ARM Cortex-M4 microcontroller with a 120 MHz CPU, 1 MB of flash memory, and 160 KB of SRAM in a 144-pin LFBGA-144-10 package. The device belongs to the XMC4000 family and is designed for embedded industrial applications requiring real-time control, Ethernet connectivity, and a broad peripheral set. It operates from a 3.3 V supply according to distributor and manufacturer product information, with an industrial temperature rating of -40 °C to +85 °C. The XMC4500 combines an ARM Cortex-M4 processor core with Infineon’s configurable peripheral set. This architecture places a general-purpose microcontroller, memory, communication interfaces, timing resources, and analog or digital peripherals into one device. The 120 MHz execution rate supports demanding control loops and connected industrial equipment, while the 1 MB program-memory capacity allows more application code, configuration data, and protocol stacks to be stored locally. Key characteristics include 32-bit ARM Cortex-M4 operation at 120 MHz, 1 MB of flash, 160 KB of SRAM, an Ethernet MAC, and a 144-pin LFBGA-144-10 package. The large pin count provides access to the family’s communication, general-purpose I/O, analog, and timing functions. The industrial temperature range makes the device suitable for factory equipment, embedded controllers, communication modules, and connected automation systems. The device is identified by the Infineon ordering code XMC4500E144F1024ACXQSA1. The XMC4500-E144X1024-AC manufacturer product designation identifies the underlying industrial MCU configuration, while the full ordering suffix identifies the package, temperature, and shipment variant. This distinction matters when comparing distributor records because some listings abbreviate or omit the complete orderable suffix. XMC4500 controllers are intended for applications where deterministic embedded control and industrial communications are more important than minimizing pin count or package area. The Ethernet MAC enables network-connected equipment, while the Cortex-M4 core supports control software, communication stacks, and supervisory functions. A 144-pin LFBGA also requires careful PCB layout with adequate escape routing, power distribution, and thermal design. For new designs, use the manufacturer datasheet and product-page ordering information to confirm the exact pin assignment, supported peripherals, electrical limits, and package dimensions. The XMC4500E144F1024ACXQSA1 is a tray-packaged industrial MCU; procurement, stock, and lead-time questions should be directed through the XAIPART Request a Quote form. Engineering decisions should also account for the 3.3 V supply requirement, the 120 MHz operating point, the 144-ball land pattern, and the -40 °C to +85 °C environmental range.

RFQ İletişim
XMC4500E144X1024ACXQSA1 - 120MHz Cortex-M4 MCU | Infineon
XMC4500E144X1024ACXQSA1

XMC4500E144X1024ACXQSA1 - 120MHz Cortex-M4 MCU | Infineon

Infineon Technologies XMC4500E144X1024ACXQSA1 is a 32-bit Arm Cortex-M4 microcontroller rated at 120 MHz, with 1024 kByte of flash memory and an Ethernet MAC, in a 144-pin PG-LFBGA-144-10 package. The device belongs to the XMC4000 family and targets industrial embedded systems requiring high-performance control, communications, and configurable peripheral support. An Arm Cortex-M4 microcontroller is a 32-bit reduced-instruction-set processor designed for embedded control. Positioned within the hierarchy of microcontroller, embedded processor, and semiconductor, it combines deterministic real-time execution with integrated memory, communications peripherals, and general-purpose I/O. The XMC4000 architecture is intended to provide a configurable peripheral set so equipment designers can tailor the device to application-specific industrial requirements. The principal features of the XMC4500E144X1024ACXQSA1 include a 120 MHz Cortex-M4 core, 1024 kByte of flash, an integrated Ethernet MAC, and a 144-pin LFBGA package. Its 1 MByte flash capacity provides substantial room for application code, configuration data, and protocol stacks. The Ethernet MAC supports designs requiring wired network connectivity without relying on an external network controller. The XMC4500 combines an industry-standard 32-bit Arm Cortex-M4 core with Infineon industrial peripherals. Its 120 MHz operating frequency supports responsive control loops and communication-intensive firmware. The family-level documentation describes a superset architecture, while the device-specific ordering information identifies the exact flash density, package, and qualification options. All grounds share a common ground potential, and the exposed die pad in applicable packages must connect to that common ground. Typical applications include industrial Ethernet equipment, factory automation controllers, programmable logic controllers, motor and motion-control systems, industrial communications gateways, and embedded data-acquisition equipment. The combination of 120 MHz processing performance, 1 MByte flash, and Ethernet MAC is particularly suitable for controllers that must execute control software and network protocols concurrently. For PCB implementation, follow the Infineon PG-LFBGA-144-10 package documentation for land patterns, ball assignments, routing, and exposed-pad connection. Pay particular attention to the common-ground requirement, high-speed Ethernet signal integrity, decoupling placement, and thermal management around the 144-ball land grid. Confirm the complete pin and ball assignments against the manufacturer package drawing before fabrication. This product overview combines the manufacturer ordering information, package identification, core and memory characteristics, and industrial application context into a design-oriented reference. It also identifies close same-family ordering options for engineers evaluating flash density and grade changes without overlooking the need to verify package-level compatibility.

RFQ İletişim
XMC4500F100F1024AC - 120MHz Cortex-M4 MCU 1024KB | Infineon
XMC4500F100F1024AC

XMC4500F100F1024AC - 120MHz Cortex-M4 MCU 1024KB | Infineon

The Infineon XMC4500F100F1024AC is a 32-bit industrial microcontroller from the XMC4000 family, integrating an ARM Cortex-M4 core with FPU running at 120 MHz, 1024 KB of embedded Flash, and 160 KB of RAM in a 100-pin LQFP package. It is engineered for energy-efficient industrial applications including digital power conversion, motor control, and industrial connectivity. An ARM Cortex-M4 microcontroller is a 32-bit processor core that combines high-performance digital signal processing (DSP) instructions with a single-precision floating-point unit (FPU), commonly deployed in industrial automation, motor control, and power-conversion systems. The XMC4000 family extends this core with Infineon's proprietary peripheral set, bridging the CPU to power-management compute, motor-control compute, and connectivity ICs in the broader industrial semiconductor taxonomy. Key features include a Cortex-M4 core with DSP/FPU at 120 MHz, 1024 KB Flash program memory, 160 KB SRAM, an integrated Ethernet MAC, USB 2.0 FS, six CAN nodes, six USIC channels configurable as UART/SPI/I2C, two 12-bit ADC units with up to 26 channels, a CCU6 timer unit for motor PWM, and a flexible peripheral interconnect (HRPWM). The LQFP-100 package is surface-mountable with standard 0.5 mm pitch. The XMC4500 architecture pairs the Cortex-M4 core with a multi-layer bus matrix and dedicated peripheral DMA channels, enabling deterministic real-time response for power-conversion and motor-control loops. Embedded Flash supports in-application programming, and the on-board temperature sensor and supply-voltage monitor enable functional-safety-aware firmware designs. Typical applications include industrial servo drives, solar inverters, switched-mode power supplies with digital control loops, field-oriented motor control (FOC), industrial PLC I/O modules, and EtherCAT/CANopen slave controllers. The combination of Cortex-M4 DSP capability and dedicated CCU6 PWM timers makes XMC4500 particularly well-suited to digital power conversion and three-phase motor control. When designing with this part, allocate adequate decoupling (100 nF + 4.7 µF per VDD/VSS pair) and ensure that the 25 MHz crystal oscillator or external clock source meets the data sheet jitter specification. The 1024 KB Flash is split into two banks, allowing concurrent read/execute and in-field firmware updates via the built-in bootstrap loader. This page consolidates Infineon datasheet specifications, distributor pricing and stock, drop-in compatible variants within the XMC4500 series, and practical design notes that are not aggregated in the standalone datasheet.

RFQ İletişim
XMC4500F100F1024ACXQMA1 - 120MHz Cortex-M4 | Infineon
XMC4500F100F1024ACXQMA1

XMC4500F100F1024ACXQMA1 - 120MHz Cortex-M4 | Infineon

Infineon Technologies XMC4500F100F1024ACXQMA1 is an industrial 32-bit Arm Cortex-M4 microcontroller operating at 120 MHz, with 1 MB of flash memory and integrated Ethernet connectivity, housed in a 100-pin PG-LQFP-11 package. The device combines a high-performance Cortex-M4 processor core with a configurable peripheral set for industrial automation, networking, and embedded control systems. A microcontroller is a semiconductor system that integrates a processor core, program memory, data memory, and peripherals such as timers, communications interfaces, and analog blocks. The XMC4500 belongs to the Arm Cortex-M4 microcontroller family and the Infineon XMC4000 industrial microcontroller series. Its position in the embedded hierarchy is processor core to microcontroller to embedded control platform, combining deterministic real-time control with Ethernet-connected industrial equipment. The principal device characteristics include a 120 MHz operating frequency, 1 MB of flash storage, 32-bit processing, and a 3.3 V supply indicated by the ordering designation. The configurable peripheral architecture allows designers to tailor timer, communication, and interface resources around an industrial application. The 100-pin LQFP package provides a conventional surface-mount option with exposed-pad construction for improved thermal performance. Technical operation centers on the Arm Cortex-M4 processor core, which uses the ARM instruction set and supports efficient interrupt-driven control. Integrated Ethernet supports network-connected industrial equipment, while the extensive peripheral set reduces the need for external interface devices. The manufacturer describes the XMC4500 as an energy-efficient industrial platform combining leading peripheral capabilities with the Cortex-M4 core. Typical uses include industrial Ethernet controllers, programmable logic controllers, factory automation nodes, building automation interfaces, and embedded robotics. In each case, the 120 MHz processing rate supports responsive control logic, 1 MB of flash accommodates embedded firmware, and Ethernet allows status reporting or distributed control over an industrial network. PCB design should follow the manufacturer pin-definition table and recommended decoupling guidance for the 100-pin exposed-pad LQFP. The exposed thermal pad requires a solder-flooded PCB land and adequate thermal-via distribution to transfer heat into the board structure. Firmware configuration should also follow the ordering-information matrix because XMC4500 derivatives differ in available peripherals and temperature options. This product page consolidates the exact ordering designation, manufacturer specifications, package information, practical PCB guidance, and verified drop-in ordering-code alternatives. It also distinguishes configurable industrial features that are shared across the XMC4500 family from the specific package and ordering code of XMC4500F100F1024ACXQMA1.

RFQ İletişim
XMC4500F100F768ACXQMA - 120MHz Cortex-M4 MCU | Infineon
XMC4500F100F768ACXQMA

XMC4500F100F768ACXQMA - 120MHz Cortex-M4 MCU | Infineon

The Infineon XMC4500F100F768ACXQMA is a 32-bit industrial ARM Cortex-M4 microcontroller operating at 120 MHz, with 768 kByte of embedded Flash and an Ethernet MAC, supplied in a 100-pin LQFP package with an exposed pad. The device is identified in distributor data as the 3.3 V, 100-pin LQFP version of Infineon's XMC4000 family and is intended for energy-efficient industrial applications. An industrial microcontroller is a semiconductor integrated circuit that combines a processor core, embedded nonvolatile memory, communication peripherals, timers, and I/O interfaces on one device. The XMC4500 belongs to the XMC4000 family and uses the ARM Cortex-M4 architecture, placing it in the hierarchy of 32-bit MCU, microcontroller, embedded processor, and semiconductor. Its configurable peripheral set allows an industrial control design to combine real-time processing with Ethernet-connected equipment. The verified device data identifies three principal performance points: a 120 MHz Cortex-M4 core, 768 kByte of Flash, and integrated Ethernet MAC support. The Cortex-M4 platform supports efficient control-oriented software, while the larger Flash capacity accommodates networking stacks, control algorithms, diagnostics, and application firmware. The Ethernet MAC makes the MCU suitable for connected industrial systems without requiring a separate network controller solely for Ethernet interface management. Infineon describes the XMC4500 as combining a leading-edge peripheral set with the industry-standard ARM Cortex-M4 core. This combination targets energy-efficient industrial equipment where deterministic embedded control, communications, and configurable peripherals must coexist in one package. Distributor records further identify the target as the industrial XMC4000 MCU in a PG-LQFP-100-11 configuration. Typical uses include industrial Ethernet controllers, connected factory equipment, industrial automation modules, embedded network bridges, and real-time supervisory controllers. In these systems, the 120 MHz processor can service communications and control tasks, while the 768 kByte Flash provides room for protocol stacks and firmware. The Ethernet MAC is especially relevant to machinery monitoring, networked sensors, and supervisory control equipment. Designers should verify the complete pin assignment, exposed-pad connection, decoupling requirements, clock configuration, and startup sequence against the Infineon XMC4500 datasheet before layout release. The verified snippets do not enumerate all 100 pin names, so this page does not infer individual pin functions. Board design should preserve the manufacturer's recommended land pattern and exposed-pad implementation rather than treating the package as a generic LQFP. This page combines verified manufacturer and distributor facts, same-family drop-in candidates, price information available on 2026-10-30, and practical qualification guidance. It also distinguishes confirmed specifications from data that must be obtained from the full manufacturer datasheet, helping engineers evaluate the XMC4500F100F768ACXQMA without relying on incomplete catalog descriptions.

RFQ İletişim
XMC4500F100F768ACXQMA1 - 120MHz Cortex-M4 MCU | Infineon
XMC4500F100F768ACXQMA1

XMC4500F100F768ACXQMA1 - 120MHz Cortex-M4 MCU | Infineon

The Infineon XMC4500F100F768ACXQMA1 is a 32-bit industrial ARM Cortex-M4 microcontroller operating up to 120 MHz, with 768 kB of embedded flash memory, 160 kB of RAM, and integrated Ethernet MAC, CAN, and LIN interfaces. It is supplied in a 100-pin PG-LQFP-11 package for industrial embedded control applications. A microcontroller is a programmable system-on-chip that combines a processor core, memory, and dedicated peripherals in one integrated device. The ARM Cortex-M4 core provides efficient real-time instruction execution, while the XMC4500 family adds configurable peripherals for industrial communications and mixed-signal control. This XMC4500 variant combines Ethernet MAC connectivity with CAN and LIN networking, making it suitable for connected industrial equipment. Key device characteristics include a maximum clock frequency of 120 MHz, 768 kB of flash for firmware storage, 160 kB of SRAM for working data, and operation from a 3.3 V supply. The ordering code XMC4500F100F768ACXQMA1 identifies the 768 kB flash configuration in the LQFP-100 industrial package. The Infineon product page identifies the base XMC4500-F100F768-AC ordering designation as an industrial ARM Cortex-M4 device with Ethernet MAC. The XMC architecture provides a configurable peripheral set that allows engineers to tailor analog, timing, communications, and digital control resources to the target application. Ethernet MAC support supports network-connected industrial nodes, while CAN and LIN interfaces enable connection to fieldbus and automotive-style vehicle networks. At 120 MHz, the Cortex-M4 core also provides sufficient performance for real-time control loops, data acquisition, and protocol handling. Typical uses include industrial Ethernet controllers, motor and power conversion systems, factory automation equipment, CAN and LIN network nodes, and industrial sensors that require substantial local memory. The 768 kB flash capacity reduces the need for external program memory in firmware-intensive control systems, while 160 kB of RAM supports buffering and communication stacks. When laying out the board, route the exposed-pad and ground connections according to the manufacturer land-pattern and thermal guidance in the XMC4500 datasheet. Confirm the power-supply design against the 3.13 V to 3.63 V operating range listed for this ordering code, and verify every pin function and alternate-function assignment against the package-specific pin table before routing. This page combines manufacturer and distributor product information with practical configuration guidance, package details, sourcing information, and design considerations. The comparison and selection notes help engineers evaluate the exact XMC4500 ordering code against other Infineon XMC industrial microcontroller options while avoiding assumptions about unverified pin compatibility.

RFQ İletişim
XMC4500F100K1024AAXQSA1 - 120MHz Cortex-M4 | Infineon
XMC4500F100K1024AAXQSA1

XMC4500F100K1024AAXQSA1 - 120MHz Cortex-M4 | Infineon

The Infineon Technologies XMC4500F100K1024AAXQSA1 is a 32-bit ARM Cortex-M4 industrial microcontroller operating at 120 MHz, with 1024 kByte of flash memory and integrated Ethernet connectivity, in a 100-pin PG-LQFP package. A microcontroller is a programmable semiconductor that combines a processor core, memory, and peripherals on one integrated circuit. The XMC4500 belongs to the XMC4000 family of 32-bit ARM microcontrollers. Its hierarchy is ARM Cortex-M4 microcontroller, embedded processor, and programmable control IC. The XMC4000 family combines the ARM Cortex-M4 core with a configurable peripheral set intended to support application-specific industrial control systems. Three headline specifications define the XMC4500F100K1024AAXQSA1: a 120 MHz Cortex-M4 core, 1024 kByte of flash memory, and Ethernet connectivity. The flash is organized as 1 MB, or 1M by 8 bits, according to distributor product listings. These characteristics make the device suitable for industrial embedded systems that require deterministic control processing, substantial local program storage, and network communication. The part belongs to the XMC4500-F100x1024 device group, whose manufacturer datasheet covers ordering designations, electrical characteristics, physical characteristics, and supported peripheral functions. The manufacturer describes the XMC4000 platform as combining an ARM Cortex-M4 core with a configurable peripheral set. That architecture allows designers to tailor the controller around particular measurement, communication, and industrial-control requirements rather than relying on a fixed peripheral arrangement. Typical uses include industrial Ethernet equipment, factory automation controllers, connected sensor hubs, building automation equipment, and industrial data-acquisition systems. The Ethernet interface supports connected control architectures, while the 120 MHz Cortex-M4 processing capability is suited to real-time supervisory and control tasks. The 1024 kByte flash also provides practical space for application firmware, configuration data, and field-upgrade handling within a single embedded device. The 100-pin LQFP package provides a substantial pin count for mixed-signal and peripheral-heavy industrial designs. Board layout should preserve the pin-oriented package geometry and route sensitive analog or communications signals away from high-current switching paths. Firmware selection and peripheral configuration should be validated against the exact ordering code and pin multiplexing table in the manufacturer datasheet before production release. This page combines the exact ordering information, package details, memory configuration, processor capability, and Ethernet feature with application guidance, engineering considerations, and a focused drop-in comparison. It is intended to help engineers determine whether the XMC4500F100K1024AAXQSA1 fits an industrial embedded design before beginning PCB implementation.

RFQ İletişim
XMC4500F100K1024ACXQSA1 - ARM Cortex-M4 MCU, 120MHz, 1MB Flash | Infineon
XMC4500F100K1024ACXQSA1

XMC4500F100K1024ACXQSA1 - ARM Cortex-M4 MCU, 120MHz, 1MB Flash | Infineon

The Infineon XMC4500F100K1024ACXQSA1 is an industrial ARM Cortex-M4 microcontroller in the XMC4000 family, delivering 120 MHz core performance with 1024 KB on-chip Flash and 160 KB SRAM in a 100-pin PG-LQFP package. It is positioned for energy-efficient industrial applications requiring deterministic real-time control, on-chip Ethernet, and a rich peripheral set. What is an ARM Cortex-M4 microcontroller? An ARM Cortex-M4 MCU is a 32-bit microcontroller built on the ARMv7-M architecture with DSP extensions and a single-precision floating-point unit (FPU). It sits within the Cortex-M family hierarchy (Cortex-M0/M0+/M3/M4/M7) of energy-efficient processors used in embedded systems. XMC4500 specifically belongs to Infineon's XMC4000 family, which extends the Cortex-M4 core with industrial communication peripherals (Ethernet, CAN, USB, USIC) and the DAVE tool-chain for app-based configuration. Key differentiating features of the XMC4500 include: ARM Cortex-M4 core with FPU at 120 MHz; 1024 KB embedded Flash and 160 KB SRAM; on-chip 10/100 Mbps Ethernet MAC for industrial networking; multiple CAN nodes and USB 2.0 Full-Speed OTG; six 4-channel USIC (Universal Serial Interface Channel) modules configurable as UART, SPI, I2C, I2S, or LIN; 12-bit ADC, up to four CCU6 timer units for motor/PWM control; and an operating voltage range of 3.0 V to 3.6 V with -40 °C to +85 °C industrial temperature support. Architecturally, the XMC4500 combines a deterministic Cortex-M4 core with a high-bandwidth multi-layer bus matrix and a dedicated DMA engine (eight channels), enabling low-latency data movement across peripherals without CPU intervention. The CCU6 timer units (Capture Compare Unit 6) deliver complementary PWM outputs with sub-microsecond dead-time insertion, supporting direct field-oriented control (FOC) of three-phase motors. The USIC modules can be software-reconfigured on the fly between UART, SPI, I2C, and LIN, providing protocol flexibility across heterogeneous industrial busses. Typical applications include industrial motor drives (BLDC, PMSM, AC induction), PLC and industrial automation controllers, building automation gateways, solar inverter controllers, multi-protocol industrial sensors, and EtherCAT/CANopen slave nodes. The integrated Ethernet MAC plus USB OTG also supports industrial gateway and HMI designs where local connectivity is required alongside real-time control. When designing with this device, prioritize decoupling on VDDP and VDDC rails (typically 100 nF + bulk ceramic per pin group), keep analog AVSS and digital VSS separation on the PCB, and budget CPU headroom above 25 percent for the DAVE-generated peripheral middleware (e.g., TCP/IP stack, EtherCAT slave library). For motor-drive designs, route the CCU6 outputs to the gate drivers with matched trace lengths to avoid shoot-through. This page synthesizes distributor pricing, drop-in pin-compatible alternatives, and practical design notes not found in any single source, including specific parameter comparisons against other XMC4500 family members (XMC4502, XMC4504, XMC4400) and competitor Cortex-M4 MCUs.

RFQ İletişim
XMC4500F100K1024ACXUMA1 - 120MHz Cortex-M4 MCU | Infineon
XMC4500F100K1024ACXUMA1

XMC4500F100K1024ACXUMA1 - 120MHz Cortex-M4 MCU | Infineon

The Infineon XMC4500F100K1024ACXUMA1 is a 32-bit industrial Arm Cortex-M4 microcontroller with a 120 MHz clock, 1 MB of embedded Flash, integrated Ethernet connectivity, and a 100-pin PG-LQFP package with exposed pad. It belongs to the XMC4000 family and combines deterministic microcontroller performance with industrial communications and embedded networking capabilities. A microcontroller is a semiconductor device that integrates a processor core, memory, programmable peripherals, and communication interfaces onto one package. The Cortex-M4 processor belongs to the Arm embedded processor family and executes instructions from tightly controlled memory while supervising timers, serial interfaces, analog peripherals, Ethernet, and external interrupt sources. Within the system hierarchy, this device is a microcontroller, embedded processor, programmable controller, and power-management-aware semiconductor. The XMC4500F100K1024ACXUMA1 provides 1 MB of Flash memory, a 120 MHz maximum CPU frequency, and 32-bit processing in an industrial-oriented package. Its Ethernet support makes the device suitable for connected equipment that must exchange data over a wired network. The exposed pad beneath the PG-LQFP-100-11 package provides a direct thermal path from the die to the PCB, allowing heat to be removed through copper and, where necessary, an external heat spreader. The Arm Cortex-M4 architecture is designed for efficient embedded control and signal-processing workloads. Its exception model supports deterministic interrupt handling, while integrated peripherals reduce the need for discrete interface components. The Ethernet subsystem adds a network interface without requiring a separate communication controller. This combination makes the device useful for industrial controllers, gateways, embedded servers, and connected sensor platforms while preserving a single-chip control architecture. Typical applications include industrial Ethernet gateways, programmable automation controllers, building and energy-management equipment, connected sensor hubs, motor and process-control systems, and communications equipment. The 120 MHz processing rate supports responsive control loops, protocol processing, and supervisory logic. The 1 MB Flash capacity allows firmware, configuration data, and application code to be stored locally, reducing system complexity for embedded networking products. PCB implementation should follow the Infineon pin-description table and reference-manual guidance for power, ground, decoupling, and exposed-pad connections. Place input and bulk-decoupling capacitors close to their associated supply pins, provide a low-impedance ground plane, and thermally couple the exposed pad to a sufficiently large copper area. Validate the final board under maximum processor activity, Ethernet traffic, and the highest intended ambient temperature. This product page combines the official ordering information with practical architecture guidance, application fit, package considerations, and parameter-level replacement analysis. It is structured to help engineers identify whether the 120 MHz Cortex-M4 core, 1 MB Flash configuration, Ethernet integration, and 100-pin industrial package align with a specific embedded-control design.

RFQ İletişim
XMC4500F100K768ACXQMA1 - 120MHz Cortex-M4 MCU | Infineon
XMC4500F100K768ACXQMA1

XMC4500F100K768ACXQMA1 - 120MHz Cortex-M4 MCU | Infineon

Infineon Technologies XMC4500F100K768ACXQMA1 is an industrial 32-bit ARM Cortex-M4 microcontroller operating at 120 MHz, with 768 KB of Flash memory and Ethernet connectivity in a 100-pin LQFP package with an exposed pad. The device supports 1.3 V and 3.3 V operation and is positioned for energy-efficient industrial embedded systems that require CAN, LIN, Ethernet and configurable peripheral resources. An ARM Cortex-M4 microcontroller is a 32-bit embedded processor that combines a processor core with memory interfaces, interrupt control, timers, communication peripherals and other programmable hardware. In the product hierarchy, the XMC4500 belongs to the XMC4000 family of industrial microcontrollers and combines real-time control capability with extensive communications and peripheral integration. It is intended for equipment requiring deterministic control and multiple communication interfaces without a separate external microcontroller. The XMC4500F100K768ACXQMA1 combines a 120 MHz Cortex-M4 core with 768 KB of Flash in an LQFP-100 package. Its configurable peripheral set allows an industrial design to tailor I/O resources to a specific control system. Ethernet support expands the application range to connected industrial equipment, while CAN and LIN connectivity supports communication with sensors, actuators, service tools and other nodes on industrial networks. This integration can reduce the number of discrete interface devices required around the main controller. A Cortex-M4-based architecture supports efficient execution of control tasks, communications stacks and supervisory functions in one device. The 100-pin LQFP package also exposes more I/O than small leadless packages, simplifying assembly for industrial prototypes and production lines equipped for conventional leaded-package soldering. Typical applications include industrial motor drives, motion-control equipment, factory automation controllers, building automation nodes, Ethernet-connected machinery and CAN or LIN network gateways. The combination of 120 MHz processing, 768 KB of Flash and multiple communications options is useful when the controller must manage several real-time loops while exchanging diagnostic or supervisory data. Hardware design should begin with the manufacturer's XMC4500 pin-description table, power and decoupling recommendations, and exposed-pad thermal layout. Place input and bulk capacitors close to their supply pins, connect the exposed pad to the appropriate ground-plane copper, and verify signal levels for all 1.3 V and 3.3 V interfaces before releasing a PCB for production. This product page consolidates the confirmed controller identity, memory capacity, package, voltage options, communications features, sourcing information and design considerations into an engineering-focused reference. The ordering code remains the controlling identifier for package, temperature, qualification and delivery configuration, so designers should compare the complete suffix when qualifying a substitute.

RFQ İletişim
XMC4500F144F1024ACXQMA1 - 120MHz ARM MCU | Infineon
XMC4500F1024ACXQMA1

XMC4500F144F1024ACXQMA1 - 120MHz ARM MCU | Infineon

The Infineon Technologies XMC4500F144F1024ACXQMA1 is a 32-bit ARM Cortex-M4 industrial microcontroller with a 120 MHz operating frequency, 1 MB of flash memory, and Ethernet connectivity in a 144-pin PG-LQFP package. The device combines a high-performance Cortex-M4 processor with an integrated industrial peripheral set for energy-efficient embedded control. It is supplied for 1.3 V and 3.3 V operation, making it suitable for industrial Ethernet equipment, automation controllers, connected machines, and embedded communication systems. An Arm Cortex-M4 microcontroller is a 32-bit reduced-instruction-set processor within the broader embedded processor and semiconductor hierarchy. The Cortex-M4 architecture is designed for deterministic real-time control, efficient interrupt handling, and energy-efficient execution. Infineon positions the XMC4500 as an industrial member of the XMC4000 family, combining general-purpose embedded processing with communication and configurable peripherals rather than functioning merely as a general-purpose microcontroller. The principal operating characteristics include a 120 MHz clock, 1 MB of flash organized as 1M x 8, 32-bit processing, and integrated Ethernet. Its 144-pin LQFP-13 package provides a high pin count suitable for parallel and digital interfaces. The manufacturer identifies the component as an industrial 32-bit microcontroller with an ARM Cortex-M4 core and 1024 kByte of flash. These characteristics distinguish it from smaller Cortex-M devices that offer fewer pins, less flash, or no integrated Ethernet. The XMC4500 family uses a configurable peripheral concept, allowing designers to tailor the device around communication, timing, serial, and application-specific control requirements. Its Ethernet capability makes the MCU suitable for networked industrial equipment without requiring a separate communications controller. Software development is supported through the Infineon XMC ecosystem and DAVE configuration tooling. Firmware designers should use the XMC4500 reference manual together with the manufacturer datasheet when assigning peripheral functions, pins, clocks, and interrupts. Typical applications include industrial Ethernet switches, motor and motion controllers, factory automation nodes, building automation interfaces, connected sensors, industrial communications equipment, and embedded gateway platforms. For designs requiring more program storage than a 768 kByte alternative, the 1 MB configuration provides additional code and data headroom. For designs whose software organization depends on an external memory interface instead of the F-series internal flash interface, the K-series device may require firmware and board-level review before substitution. A critical implementation consideration is the exposed-pad connection. Infineon specifies that all VSS, VSSA, and VSSO pins share a common ground potential and that the exposed die pad in applicable packages must also connect to common ground. The PCB should therefore provide a low-impedance ground plane, adequate thermal-via distribution, and decoupling close to the supply pins. Pin multiplexing and alternate-function selection must be checked in the datasheet pin table before finalizing the board. This page combines the manufacturer product information, datasheet, reference manual, distributor availability records, and carefully qualified same-package alternatives. It also organizes the device for industrial design decisions by covering the Cortex-M4 architecture, 120 MHz performance, 1 MB flash, Ethernet integration, common-ground construction, and the engineering checks required for an LQFP-144 migration.

RFQ İletişim
XMC4500F144F768ACXQMA1 - 120MHz Cortex-M4 | Infineon
XMC4500F144F768ACXQMA1

XMC4500F144F768ACXQMA1 - 120MHz Cortex-M4 | Infineon

Infineon Technologies XMC4500F144F768ACXQMA1 is a 32-bit ARM Cortex-M4 microcontroller operating up to 120 MHz, with 768 KB of flash memory, 160 KB of SRAM, and a 144-pin LQFP package. It belongs to the XMC4500 industrial microcontroller family and combines deterministic real-time control with Ethernet, CAN, LIN, mixed-signal acquisition, and timer/PWM resources. An industrial microcontroller is a semiconductor designed for embedded control systems that must monitor inputs, execute control algorithms, and manage communications in real time. The XMC4500 family combines an Arm Cortex-M4 processor core with configurable peripherals, analog-to-digital conversion, and communication interfaces. This hierarchy places the device between a general-purpose microcontroller and a highly integrated industrial control platform. The XMC4500F144F768ACXQMA1 provides 768 KB of flash for firmware and 160 KB of SRAM for working memory. Its Cortex-M4 architecture supports 32-bit processing at up to 120 MHz, while the peripheral set includes CAN and LIN networking, Ethernet connectivity, mixed-signal acquisition, and timer/PWM control functions. The extended industrial temperature range of -40°C to +85°C supports operation across commercial and industrial environments. A 144-pin LQFP exposes the device's extensive analog, digital, communications, timer, and debug resources while retaining a surface-mount assembly format. The XMC4500 platform uses a configurable peripheral approach, allowing software developers to organize communication, timing, and acquisition functions around the requirements of a specific machine or controller. Pin assignment, alternate functions, and peripheral routing must be confirmed in the pin-description tables of the manufacturer datasheet. Typical applications include industrial Ethernet controllers, CAN and LIN network gateways, motor-control and timer/PWM platforms, programmable automation equipment, sensor-acquisition systems, and embedded factory communication nodes. The combination of 120 MHz processing, 768 KB of flash, and mixed-signal acquisition makes the device suitable for controls that require both communications bandwidth and deterministic peripheral operation. PCB design should provide a complete low-frequency decoupling network, clean grounding for analog inputs, and careful signal-integrity routing for Ethernet and other communications. Firmware should configure pins, clocks, analog channels, and communication objects explicitly because the XMC4500 uses flexible peripheral multiplexing. The 144-pin package also requires adequate copper area and a thermal-aware layout to support reliable operation near the upper temperature limit. This page organizes the core MCU specifications, practical application fit, comparison points, and design guidance around the XMC4500F144F768ACXQMA1. It also identifies where pin-level and production-qualification decisions require confirmation against the current Infineon datasheet and errata.

RFQ İletişim
XMC4500F144K1024ACXQMA1 - 120MHz Cortex-M4 MCU | Infineon
XMC4500F144K1024ACXQMA1

XMC4500F144K1024ACXQMA1 - 120MHz Cortex-M4 MCU | Infineon

Infineon XMC4500F144K1024ACXQMA1 is a 32-bit industrial ARM Cortex-M4 microcontroller with 120 MHz maximum clock frequency, 1024 kByte flash memory, and 160 kByte SRAM in a 144-pin LQFP package. It combines an industrial communications-focused microcontroller platform with Ethernet connectivity for connected industrial equipment, automation systems, and embedded network controllers. An ARM Cortex-M4 microcontroller is a 32-bit embedded processing device built around the Cortex-M4 processor core. The MCU hierarchy extends from a general-purpose microcontroller to a real-time embedded controller, with integrated flash, SRAM, digital peripherals, communication interfaces, and interrupt control. Infineon positions the XMC4500 within its XMC4000 family for energy-efficient industrial applications requiring configurable peripherals and Ethernet support. The principal device features include a 120 MHz maximum operating frequency, 1 MB of flash organized as 1M x 8, and 160 kByte of SRAM. Its 144-pin LQFP package provides access to the extensive XMC4500 peripheral set while supporting compact industrial control-board layouts. The ordering designation identifies an industrial-grade XMC4500 configuration with 1024 kByte flash and the XQMA1 package and qualification suffix. The device combines high-frequency Cortex-M4 processing with on-chip memory and a configurable peripheral set. This architecture allows software-defined control functions, communication protocols, and application-specific interfaces to coexist on one component. Ethernet connectivity makes the microcontroller suitable for embedded gateways and industrial network nodes where local control and network communication must be combined without a separate protocol processor. Typical uses include industrial Ethernet controllers, factory automation equipment, networked motor and motion-control systems, building automation interfaces, and industrial communications gateways. The 120 MHz processing rate supports responsive protocol handling and control-loop execution, while 1024 kByte flash provides room for networking stacks, control firmware, diagnostics, and configuration data. PCB designers should assign all 144 package pins directly from the pin-description and package tables in the Infineon XMC4500 datasheet. They should also preserve the manufacturer's recommendations for supply decoupling, clock circuitry, analog interfaces, and exposed-package routing. Firmware must be tested against the exact ordering designation because suffix changes can represent differences in grade, temperature range, qualification, or package configuration. This product page combines the Infineon ordering information, family-level electrical characteristics, package details, and practical replacement guidance into an engineering-focused resource. It supports component identification, board redesign, firmware planning, and cross-reference work for engineers evaluating the XMC4500F144K1024ACXQMA1 in industrial embedded systems.

RFQ İletişim
XMC4500F144K768ACXQMA1 - 120MHz Cortex-M4 MCU | Infineon
XMC4500F144K768ACXQMA1

XMC4500F144K768ACXQMA1 - 120MHz Cortex-M4 MCU | Infineon

Infineon Technologies XMC4500F144K768ACXQMA1 is a 32-bit ARM Cortex-M4 microcontroller in the XMC4000 family, operating at up to 120 MHz with 768 KB of flash memory and a 144-pin LQFP package. It is designed for industrial applications requiring deterministic control, mixed-signal acquisition, networking connectivity, and a broad peripheral set in a single device. A microcontroller is a programmable semiconductor that integrates a processor core, memory, communication peripherals, timers, analog interfaces, and control logic onto one package. The XMC4500 architecture belongs to the hierarchy of embedded processors: ARM Cortex-M4 core, 32-bit microcontroller, XMC4000 family, and industrial embedded control. Its combination of performance and peripheral integration helps reduce the component count in motor-control, communications, and industrial automation systems. Key features include a 120 MHz Cortex-M4 processor, 768 KB of flash storage, 160 KB of RAM, 32-bit processing, and communication functions identified in the product information, including CAN, LIN, and Ethernet. The mixed-signal acquisition capability supports applications where analog measurement and digital control must operate in the same embedded platform. The industrial-grade ordering designation is associated with the XMC4500-F144K768-AC family. The device uses an industry-standard ARM Cortex-M4 processor core and a configurable peripheral set intended for energy-efficient industrial applications. At 120 MHz, it provides substantially greater computation headroom than slower general-purpose microcontrollers, while the integrated communications and analog resources reduce the need for separate interface devices. Designers should still verify peripheral availability, pin multiplexing, electrical limits, and package details against the Infineon XMC4500 datasheet before finalizing a PCB. Typical applications include industrial motor control, CAN and LIN network nodes, Ethernet-connected automation equipment, factory sensor hubs, power conversion controllers, and embedded industrial gateways. The XMC4500 is particularly appropriate when local control, communications, and analog acquisition are required in a single controller rather than across multiple discrete devices. The primary design consideration is package and pin planning. The 144-pin LQFP footprint requires a land pattern matching the PG-LQFP-144-13 package, careful escape routing, and adequate decoupling near the supply pins. Engineers should also review clock configuration, communication peripheral multiplexing, and the recommended operating ranges in the manufacturer datasheet before production release. This page combines the manufacturer datasheet, distributor product listings, package information, and engineering-oriented application guidance to make the XMC4500F144K768ACXQMA1 easier to evaluate for industrial embedded designs. The exact ordering information, electrical characteristics, lifecycle status, and peripheral configuration should be confirmed against the current Infineon documentation before procurement.

RFQ İletişim