AD974BRSZ vs AD974BRS Karşılaştırma
Ayrıntılı yan yana karşılaştırma AD974BRSZ tarafından Analog Devices ve AD974BRS tarafından Analog DevicesAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Özellik Karşılaştırması
| Parametre | AD974BRSZ | AD974BRS |
|---|---|---|
| Marka | Analog Devices | Analog Devices |
| Kategori | ADC/DAC | ADC/DAC |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Product Type | 4-channel data-acquisition ADC | — |
| Çözünürlük | 16 bit | — |
| Maximum Sampling Rate | 200 ksps | — |
| Number of Analog Input Channels | 4 channels | 4 channels |
| Converter Architecture | Successive-approximation switched-capacitor ADC | — |
| Besleme Gerilimi | 5 V | +5 V |
| Internal Reference Voltage | 2.5 V | +2.5 V |
| Input Range 1 | 0 V to 4 V | — |
| Input Range 2 | 0 V to 5 V | — |
| Input Range 3 | -10 V to +10 V | — |
| Digital Interface | Serial interface | High-speed serial interface |
| Analog Input Multiplexer | 4-channel internal multiplexer | — |
| Power-Down Mode | Yes | Supported |
| Power Supply Count | 1 | — |
| Paket | 28-pin SSOP | 28-SSOP |
| Montaj Türü | Surface mount | Surface mount |
| RoHS Durumu | [DATA_NEEDED: RoHS compliance status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH compliance status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| İşletim Sıcaklığı Aralığı | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Digital Input Logic Levels | [DATA_NEEDED: digital input logic levels] | — |
| Analog Input Input Impedance | [DATA_NEEDED: analog input impedance] | — |
| Total Unadjusted Error | [DATA_NEEDED: total unadjusted error] | — |
| Integral Nonlinearity | [DATA_NEEDED: integral nonlinearity] | — |
| Differential Nonlinearity | [DATA_NEEDED: differential nonlinearity] | — |
| Signal-to-Noise Ratio | [DATA_NEEDED: signal-to-noise ratio] | — |
| ENOB | [DATA_NEEDED: effective number of bits] | — |
| Typical Power Dissipation | [DATA_NEEDED: typical power dissipation] | — |
| Power-Down Current | [DATA_NEEDED: power-down current] | — |
| ADC Resolution | — | 16 bits |
| Sampling Throughput | — | 200 kSPS |
| Input Multiplexer | — | 4-channel single-ended input multiplexer |
| Supported Analog Input Ranges | — | 0 V to +4 V, 0 V to +5 V, or ±10 V |
| Reference Selection | — | Internal or external 2.5 V reference |
| Maximum Power Dissipation | — | 120 mW |
| Conversion Architecture | — | Successive-approximation switched-capacitor ADC |
| On-Chip Clock | — | Supported |
| Analog Input Type | — | Single-ended |