AD974BRSZ vs AD974BRS 비교
다음의 상세 나란히 비교: AD974BRSZ 제조: Analog Devices 및 AD974BRS 제조: Analog Devices. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | AD974BRSZ | AD974BRS |
|---|---|---|
| 브랜드 | Analog Devices | Analog Devices |
| 카테고리 | ADC/DAC | ADC/DAC |
| 수명 주기 상태 | 활성 | 활성 |
| Product Type | 4-channel data-acquisition ADC | — |
| 분해능 | 16 bit | — |
| Maximum Sampling Rate | 200 ksps | — |
| Number of Analog Input Channels | 4 channels | 4 channels |
| Converter Architecture | Successive-approximation switched-capacitor ADC | — |
| 공급 전압 | 5 V | +5 V |
| Internal Reference Voltage | 2.5 V | +2.5 V |
| Input Range 1 | 0 V to 4 V | — |
| Input Range 2 | 0 V to 5 V | — |
| Input Range 3 | -10 V to +10 V | — |
| Digital Interface | Serial interface | High-speed serial interface |
| Analog Input Multiplexer | 4-channel internal multiplexer | — |
| Power-Down Mode | Yes | Supported |
| Power Supply Count | 1 | — |
| 패키지 | 28-pin SSOP | 28-SSOP |
| 실장 유형 | Surface mount | Surface mount |
| RoHS 상태 | [DATA_NEEDED: RoHS compliance status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH compliance status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| 동작 온도 범위 | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Digital Input Logic Levels | [DATA_NEEDED: digital input logic levels] | — |
| Analog Input Input Impedance | [DATA_NEEDED: analog input impedance] | — |
| Total Unadjusted Error | [DATA_NEEDED: total unadjusted error] | — |
| Integral Nonlinearity | [DATA_NEEDED: integral nonlinearity] | — |
| Differential Nonlinearity | [DATA_NEEDED: differential nonlinearity] | — |
| Signal-to-Noise Ratio | [DATA_NEEDED: signal-to-noise ratio] | — |
| ENOB | [DATA_NEEDED: effective number of bits] | — |
| Typical Power Dissipation | [DATA_NEEDED: typical power dissipation] | — |
| Power-Down Current | [DATA_NEEDED: power-down current] | — |
| ADC Resolution | — | 16 bits |
| Sampling Throughput | — | 200 kSPS |
| Input Multiplexer | — | 4-channel single-ended input multiplexer |
| Supported Analog Input Ranges | — | 0 V to +4 V, 0 V to +5 V, or ±10 V |
| Reference Selection | — | Internal or external 2.5 V reference |
| Maximum Power Dissipation | — | 120 mW |
| Conversion Architecture | — | Successive-approximation switched-capacitor ADC |
| On-Chip Clock | — | Supported |
| Analog Input Type | — | Single-ended |