ADM3491ARZ vs ADM3491AN-1 Karşılaştırma
Ayrıntılı yan yana karşılaştırma ADM3491ARZ tarafından Analog Devices ve ADM3491AN-1 tarafından Analog DevicesAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Analog Devices
ADM3491AN-1 - 3.3V 20Mbps RS-485/RS-422 Transceiver | Analog Devices
ADM3491AN-1 ✓ AktifÖzellik Karşılaştırması
| Parametre | ADM3491ARZ | ADM3491AN-1 |
|---|---|---|
| Marka | Analog Devices | Analog Devices |
| Kategori | Interface ICs | Interface ICs |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Product Type | Full-duplex differential line transceiver | Low-power differential RS-485/RS-422 line transceiver |
| Supported Standards | EIA RS-422 and EIA RS-485 | EIA RS-485 and RS-422 |
| Besleme Gerilimi | 3.3 V | 3.3 V |
| Maximum Data Rate | 10 Mbps | 20 Mbps |
| Receiver Input Impedance | 19 kΩ | — |
| Maximum Transceivers per Bus | 50 transceivers | — |
| Besleme Akımı | 840 µA | — |
| Kapatma Akımı | 2 nA | — |
| Logic Compatibility | 5 V logic interoperable | — |
| Transmit Skew | 8 ns | — |
| Common-Mode Range | Full common-mode range | — |
| Short-Circuit Protection | Yes | — |
| Termal Kapatma | Yes | — |
| İşletim Sıcaklığı | -40 °C to +85 °C | — |
| Paket | 14-lead SOIC | 14-lead SOIC |
| Montaj Türü | Surface mount | Surface mount |
| EIA RS-485 Transient Immunity | IEC 1000-4-4 above 1 kV | — |
| RoHS Durumu | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Low-Power Consumption | — | 840 uA |
| Communication Mode | — | Full duplex |
| Driver Architecture | — | Differential line driver |
| Receiver Architecture | — | Differential line receiver |
| Power-Down Feature | — | Yes, shutdown mode |
| İşletim Sıcaklığı Aralığı | — | [DATA_NEEDED: operating temperature range] |
| Driver Enable Control | — | [DATA_NEEDED: driver enable polarity and timing] |
| Receiver Enable Control | — | [DATA_NEEDED: receiver enable polarity and timing] |
| Common-Mode Rejection | — | [DATA_NEEDED: receiver common-mode rejection] |
| Maximum Bus Length | — | [DATA_NEEDED: maximum cable length] |