ADM3491ARZ vs ADM3491AN-1 Comparaison
Comparaison détaillée côte à côte de ADM3491ARZ par Analog Devices et ADM3491AN-1 par Analog Devices. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Analog Devices
ADM3491AN-1 - 3.3V 20Mbps RS-485/RS-422 Transceiver | Analog Devices
ADM3491AN-1 ✓ ActifComparaison des spécifications
| Paramètre | ADM3491ARZ | ADM3491AN-1 |
|---|---|---|
| Marque | Analog Devices | Analog Devices |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Product Type | Full-duplex differential line transceiver | Low-power differential RS-485/RS-422 line transceiver |
| Supported Standards | EIA RS-422 and EIA RS-485 | EIA RS-485 and RS-422 |
| Tension d'alimentation | 3.3 V | 3.3 V |
| Maximum Data Rate | 10 Mbps | 20 Mbps |
| Receiver Input Impedance | 19 kΩ | — |
| Maximum Transceivers per Bus | 50 transceivers | — |
| Courant d'alimentation | 840 µA | — |
| Courant d'arrêt | 2 nA | — |
| Logic Compatibility | 5 V logic interoperable | — |
| Transmit Skew | 8 ns | — |
| Common-Mode Range | Full common-mode range | — |
| Short-Circuit Protection | Yes | — |
| Arrêt thermique | Yes | — |
| Température de fonctionnement | -40 °C to +85 °C | — |
| Boîtier | 14-lead SOIC | 14-lead SOIC |
| Type de montage | Surface mount | Surface mount |
| EIA RS-485 Transient Immunity | IEC 1000-4-4 above 1 kV | — |
| Statut RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Low-Power Consumption | — | 840 uA |
| Communication Mode | — | Full duplex |
| Driver Architecture | — | Differential line driver |
| Receiver Architecture | — | Differential line receiver |
| Power-Down Feature | — | Yes, shutdown mode |
| Plage de température de fonctionnement | — | [DATA_NEEDED: operating temperature range] |
| Driver Enable Control | — | [DATA_NEEDED: driver enable polarity and timing] |
| Receiver Enable Control | — | [DATA_NEEDED: receiver enable polarity and timing] |
| Common-Mode Rejection | — | [DATA_NEEDED: receiver common-mode rejection] |
| Maximum Bus Length | — | [DATA_NEEDED: maximum cable length] |