BTS3125TFATMA1 vs BTS3060TFATMA1 Karşılaştırma
Ayrıntılı yan yana karşılaştırma BTS3125TFATMA1 tarafından Infineon ve BTS3060TFATMA1 tarafından InfineonAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Özellik Karşılaştırması
| Parametre | BTS3125TFATMA1 | BTS3060TFATMA1 |
|---|---|---|
| Marka | Infineon | Infineon |
| Kategori | Power MOSFET Drivers | Power MOSFET Drivers |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Product Type | Single-channel N-channel low-side smart power switch | Smart Low-Side Power Switch |
| Load Current (continuous) | 2 A | — |
| Load Current (pulsed) | [DATA_NEEDED: pulsed drain current limit] | — |
| RDS(on) typical | 250 mΩ at 5 V Vbb | — |
| Supply Voltage (Vbb, nominal) | 5 V | — |
| Supply Voltage (Vbb, operating) | 5 V to 28 V | — |
| Load Dump Transient Protection | 40 V | — |
| Input Logic Compatibility | 3.3 V / 5 V CMOS | — |
| On-State Resistance (max) | [DATA_NEEDED: maximum RDS(on) over temp] | — |
| Jantten Ortama Termal Direnç | [DATA_NEEDED: theta_JA value] | — |
| İşletim Sıcaklığı Aralığı | -40°C to +150°C | -40°C to +150°C (junction) |
| Over-temperature Shutdown | ~150°C with auto-restart | — |
| Short-Circuit Protection | Yes, current-limited | — |
| Over-voltage Protection | Yes (clamping at 40 V) | — |
| ESD Protection | Yes (per IEC 61000-4-2, [DATA_NEEDED: contact/air kV rating]) | — |
| Status Flag Output | Yes (fault feedback) | — |
| Paket | PG-TO252-3-313 (DPAK, SC-63) | PG-TO252-3 (DPAK), 3 pins (2+Tab) |
| Montaj Türü | Surface Mount | Surface Mount |
| MSL Seviyesi | [DATA_NEEDED: MSL moisture sensitivity level] | — |
| RoHS Durumu | Compliant | Compliant |
| Manufacturer Family | — | HITFET |
| Number of Channels | — | 1 |
| On-Resistance (RDS(on) typ) | — | 50 mΩ at 25°C |
| Maximum Continuous Load Current | — | 3 A |
| Maximum Load Supply Voltage | — | 42 V |
| Transistor Türü | — | N-Channel Vertical Power MOSFET (monolithically integrated) |
| Switch Configuration | — | Low-Side, 1:1 |
| Input Type | — | Logic-level gate input (3.3V / 5V compatible) |
| Diagnostic Output | — | Status pin (open-drain, requires pull-up) |
| Embedded Protection | — | Overcurrent, Overtemperature, Overvoltage, Open-load detection |
| Automotive Qualification | — | AEC-Q100 qualified |
| Packaging | — | Tape & Reel (TF suffix) |