ITS711L1FUMA1 vs ISP752TFUMA1 Karşılaştırma
Ayrıntılı yan yana karşılaştırma ITS711L1FUMA1 tarafından Infineon ve ISP752TFUMA1 tarafından InfineonAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Infineon
ITS711L1FUMA1 - 4-Ch Smart High-Side Switch 1.7A PG-DSO-20 | Infineon
ITS711L1FUMA1 ✓ AktifÖzellik Karşılaştırması
| Parametre | ITS711L1FUMA1 | ISP752TFUMA1 |
|---|---|---|
| Marka | Infineon | Infineon |
| Kategori | Power MOSFET Drivers | Power MOSFET Drivers |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Switch Type | High-Side Power Switch | — |
| Çıkış Sayısı | 4 | — |
| Input:Output Ratio | 1:1 | — |
| Çıkış Konfigürasyonu | High Side | High-Side |
| Çıkış Türü | N-Channel | N-Channel |
| Continuous Output Current (per channel) | 1.7 A | — |
| Maximum Load Current (package) | 4.4 A | — |
| Load Voltage Range | 5 V to 34 V | — |
| Supply Voltage (Vcc) | Not Required (Logic-level inputs) | — |
| Input Interface | CMOS-compatible, ground-referenced | — |
| Technology | Smart SIPMOS (vertical N-channel DMOS + CMOS logic) | — |
| On-State Resistance (Rdson) | [DATA_NEEDED: Rdson per channel] | — |
| Diagnostic Feedback | Yes (open-drain status output) | — |
| Embedded Protection | Over-load, Over-voltage, Over-temperature, Short-circuit | — |
| Paket | PG-DSO-20-31 (DSO-20) | — |
| Montaj Türü | Surface Mount | Surface Mount |
| İşletim Sıcaklığı | -40C to +85C | -30 C to +85 C |
| Series | PROFET Industrial | PROFET™ Industrial |
| RoHS Durumu | Compliant | Compliant |
| Product Type | — | Smart High-Side Power Switch |
| Switch Configuration | — | 1:1 (Single channel) |
| On-Resistance (Ron) | — | 200 mOhm |
| Continuous Load Current | — | 1.3 A |
| İşletim Besleme Gerilimi | — | 6 V to 52 V |
| Input Type | — | Non-Inverting (logic-level) |
| Paket / Kas | — | PG-DSO-8-24 (DSO-8 with exposed pad) |
| Fault Protection | — | Overcurrent; Short-Circuit; Overtemperature; Overvoltage (load-dump); Reverse voltage |
| Diagnostic Output | — | Status flag |