KSZ8041FTLI vs KSZ8041TL Karşılaştırma

Ayrıntılı yan yana karşılaştırma KSZ8041FTLI tarafından Microchip Technology ve KSZ8041TL tarafından Microchip TechnologyAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.

Microchip Technology
KSZ8041FTLI KSZ8041FTLI 10/100 Ethernet PHY | Microchip | 48-TQFP

KSZ8041FTLI 10/100 Ethernet PHY | Microchip | 48-TQFP

KSZ8041FTLI ✓ Aktif
Microchip Technology
KSZ8041TL KSZ8041TL 10/100 Ethernet PHY | Microchip | TQFP-48

KSZ8041TL 10/100 Ethernet PHY | Microchip | TQFP-48

KSZ8041TL ✓ Aktif

Özellik Karşılaştırması

Parametre KSZ8041FTLI KSZ8041TL
Marka Microchip Technology Microchip Technology
Kategori Interface ICs Interface ICs
Yaşam Döngüsü Durumu Aktif Aktif
Product Type 10/100 Ethernet physical-layer transceiver 10BASE-T/100BASE-TX Ethernet physical-layer transceiver
Ethernet Speed Support 10Base-T and 100Base-TX —
Host Interface MII, RMII, and SMII —
Supply Architecture Single supply Single-supply
Crossover Support HP Auto-MDI/MDI-X —
Paket 48-pin TQFP 48-TQFP (7 x 7 mm)
Package Dimensions 7 mm x 7 mm —
İşletim Sıcaklığı -40 C to +85 C [DATA_NEEDED: operating temperature range]
Montaj Türü Surface mount Surface mount
Manufacturer Microchip Technology —
Port Count 1 Ethernet port —
Media Type Twisted-pair copper —
RoHS Durumu [DATA_NEEDED: RoHS compliance] [DATA_NEEDED: RoHS status]
REACH Status [DATA_NEEDED: REACH compliance] [DATA_NEEDED: REACH status]
AEC-Q100 Qualification [DATA_NEEDED: AEC-Q100 qualification] —
Absolute Maximum Supply Voltage [DATA_NEEDED: absolute maximum supply voltage] —
Recommended Operating Supply Voltage [DATA_NEEDED: recommended operating supply voltage] —
Typical Operating Current [DATA_NEEDED: typical operating current] —
Transmit Signal Levels [DATA_NEEDED: 100Base-TX and 10Base-T transmit signal levels] —
Supported Data Rates — 10 Mb/s and 100 Mb/s
Host Interfaces — MII, RMII, and SMII
Cable Standard — 10BASE-T and 100BASE-TX
Mixed-Signal Design — Yes; intended to extend signaling distance while reducing power consumption
Auto MDI/MDIX — HP Auto MDI/MDIX
Interrupt Signal — INTRP on pin 32; optional PHY-register status-update signal
Number of Drivers/Receivers — 1 driver and 1 receiver
Device Type — Ethernet interface IC / physical-layer transceiver
Besleme Gerilimi — [DATA_NEEDED: supply voltage range]
Interface Clock — [DATA_NEEDED: clock frequency]
Ethernet Magnetics — [DATA_NEEDED: supported magnetics and isolation configuration]
Automotive Qualification — [DATA_NEEDED: AEC-Q100 qualification]

Dökümanlar & Kaynaklar

Tüm Ürünleri Gözden Geçir BOM Oluştur Teklif İsteyin