KSZ8041FTLI vs KSZ8041TL So sánh

So sánh chi tiết song song của KSZ8041FTLI bằng Microchip Technology và KSZ8041TL bằng Microchip Technology. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

Microchip Technology
KSZ8041FTLI KSZ8041FTLI 10/100 Ethernet PHY | Microchip | 48-TQFP

KSZ8041FTLI 10/100 Ethernet PHY | Microchip | 48-TQFP

KSZ8041FTLI ✓ Hoạt động
Microchip Technology
KSZ8041TL KSZ8041TL 10/100 Ethernet PHY | Microchip | TQFP-48

KSZ8041TL 10/100 Ethernet PHY | Microchip | TQFP-48

KSZ8041TL ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số KSZ8041FTLI KSZ8041TL
Thương hiệu Microchip Technology Microchip Technology
Danh mục Interface ICs Interface ICs
Trạng thái vòng đời Hoạt động Hoạt động
Product Type 10/100 Ethernet physical-layer transceiver 10BASE-T/100BASE-TX Ethernet physical-layer transceiver
Ethernet Speed Support 10Base-T and 100Base-TX —
Host Interface MII, RMII, and SMII —
Supply Architecture Single supply Single-supply
Crossover Support HP Auto-MDI/MDI-X —
Hộp 48-pin TQFP 48-TQFP (7 x 7 mm)
Package Dimensions 7 mm x 7 mm —
Nhiệt độ hoạt động -40 C to +85 C [DATA_NEEDED: operating temperature range]
Kiểu lắp đặt Surface mount Surface mount
Manufacturer Microchip Technology —
Port Count 1 Ethernet port —
Media Type Twisted-pair copper —
Trạng thái RoHS [DATA_NEEDED: RoHS compliance] [DATA_NEEDED: RoHS status]
REACH Status [DATA_NEEDED: REACH compliance] [DATA_NEEDED: REACH status]
AEC-Q100 Qualification [DATA_NEEDED: AEC-Q100 qualification] —
Absolute Maximum Supply Voltage [DATA_NEEDED: absolute maximum supply voltage] —
Recommended Operating Supply Voltage [DATA_NEEDED: recommended operating supply voltage] —
Typical Operating Current [DATA_NEEDED: typical operating current] —
Transmit Signal Levels [DATA_NEEDED: 100Base-TX and 10Base-T transmit signal levels] —
Supported Data Rates — 10 Mb/s and 100 Mb/s
Host Interfaces — MII, RMII, and SMII
Cable Standard — 10BASE-T and 100BASE-TX
Mixed-Signal Design — Yes; intended to extend signaling distance while reducing power consumption
Auto MDI/MDIX — HP Auto MDI/MDIX
Interrupt Signal — INTRP on pin 32; optional PHY-register status-update signal
Number of Drivers/Receivers — 1 driver and 1 receiver
Device Type — Ethernet interface IC / physical-layer transceiver
Điện áp cung cấp — [DATA_NEEDED: supply voltage range]
Interface Clock — [DATA_NEEDED: clock frequency]
Ethernet Magnetics — [DATA_NEEDED: supported magnetics and isolation configuration]
Automotive Qualification — [DATA_NEEDED: AEC-Q100 qualification]

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá