KSZ9031RNXCC vs KSZ9031RNXCA Karşılaştırma

Ayrıntılı yan yana karşılaştırma KSZ9031RNXCC tarafından Microchip Technology ve KSZ9031RNXCA tarafından Microchip TechnologyAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.

Microchip Technology
KSZ9031RNXCC KSZ9031RNXCC - Gigabit Ethernet PHY RGMII | Microchip

KSZ9031RNXCC - Gigabit Ethernet PHY RGMII | Microchip

KSZ9031RNXCC ✓ Aktif
Microchip Technology
KSZ9031RNXCA KSZ9031RNXCA - 1GbE RGMII Transceiver | Microchip Technology

KSZ9031RNXCA - 1GbE RGMII Transceiver | Microchip Technology

KSZ9031RNXCA ✓ Aktif

Özellik Karşılaştırması

Parametre KSZ9031RNXCC KSZ9031RNXCA
Marka Microchip Technology Microchip Technology
Kategori Interface ICs Interface ICs
Yaşam Döngüsü Durumu Aktif Aktif
Product Type Ethernet Physical Layer Transceiver (PHY) Gigabit Ethernet physical-layer transceiver
Veri Hızı 10 / 100 / 1000 Mbps (triple-speed) —
Standards IEEE 802.3, 802.3u, 802.3ab, 802.3az (EEE) —
MAC Interface RGMII (Version 2.0 compliant, on-chip delay) —
Cable Interface 4 differential pairs, CAT-5 UTP, 100-ohm differential —
Management Interface MDIO / MDC (IEEE 802.3 clause 22/45) —
Supply Voltage (Analog/DVDD) 3.3 V —
Core Supply 1.2 V (on-chip LDO controller + external MOSFET) —
On-chip Features Termination resistors, LinkMD cable diagnostics, auto-negotiation, polarity correction —
Power Saving Energy Efficient Ethernet (EEE) IEEE 802.3az, Wake-on-LAN, hardware CPD mode —
Paket 48-pin QFN (7x7 mm) 48-pin QFN, 7 mm x 7 mm
Montaj Türü Surface Mount Surface mount
İşletim Sıcaklığı 0C to +70C (commercial grade, CC suffix) —
MSL Seviyesi 3 —
RoHS Durumu Compliant [DATA_NEEDED: RoHS status]
Supported Speeds — 10 Mbps, 100 Mbps, and 1 Gbps
Supported Ethernet Modes — 10Base-T, 100Base-TX, and 1000Base-T
Host Interface — RGMII
Data Path — 4-wire full-duplex Ethernet
Supply Voltage Options — 1.8 V, 2.5 V, and 3.3 V
Analog Core Supply — 1.2 V
Cable Diagnostics — LinkMD
Time-Domain Reflectometry Diagnostics — Supported TDR-based cable testing
Mode Configuration — MODE[3:0] strap inputs
Hardware Reset Input — RESET_N, pin 42
Automotive Qualification — Automotive qualified
AVDDL Bulk Capacitance — 10 uF
AVDDL Local Decoupling — 0.1 uF per AVDDL pin
AVDDL Ferrite Bead Impedance — 100 ohm to 220 ohm at 100 MHz
İşletim Sıcaklığı Aralığı — [DATA_NEEDED: operating temperature range]
REACH Status — [DATA_NEEDED: REACH status]

Dökümanlar & Kaynaklar

Tüm Ürünleri Gözden Geçir BOM Oluştur Teklif İsteyin