KSZ9031RNXCC vs KSZ9031RNXCA Pengandingan

Pengandingan Sisi Kiri Sisi Kanan Terperinci KSZ9031RNXCC disebabkan oleh Microchip Technology dan KSZ9031RNXCA disebabkan oleh Microchip Technology. Bandingkan spesifikasi utama, parameter elektrik, pakej, status kehidupan, harga, dan keupayaan untuk menentukan komponen terbaik untuk keperluan disenjaya anda.

Microchip Technology
KSZ9031RNXCC KSZ9031RNXCC - Gigabit Ethernet PHY RGMII | Microchip

KSZ9031RNXCC - Gigabit Ethernet PHY RGMII | Microchip

KSZ9031RNXCC ✓ Aktif
Microchip Technology
KSZ9031RNXCA KSZ9031RNXCA - 1GbE RGMII Transceiver | Microchip Technology

KSZ9031RNXCA - 1GbE RGMII Transceiver | Microchip Technology

KSZ9031RNXCA ✓ Aktif

Pengandingan Spesifikasi

Parametr KSZ9031RNXCC KSZ9031RNXCA
Merek Microchip Technology Microchip Technology
Kategori Interface ICs Interface ICs
Status Lingkungan Hidup Aktif Aktif
Product Type Ethernet Physical Layer Transceiver (PHY) Gigabit Ethernet physical-layer transceiver
Kadar Data 10 / 100 / 1000 Mbps (triple-speed) —
Standards IEEE 802.3, 802.3u, 802.3ab, 802.3az (EEE) —
MAC Interface RGMII (Version 2.0 compliant, on-chip delay) —
Cable Interface 4 differential pairs, CAT-5 UTP, 100-ohm differential —
Management Interface MDIO / MDC (IEEE 802.3 clause 22/45) —
Supply Voltage (Analog/DVDD) 3.3 V —
Core Supply 1.2 V (on-chip LDO controller + external MOSFET) —
On-chip Features Termination resistors, LinkMD cable diagnostics, auto-negotiation, polarity correction —
Power Saving Energy Efficient Ethernet (EEE) IEEE 802.3az, Wake-on-LAN, hardware CPD mode —
Kemasan 48-pin QFN (7x7 mm) 48-pin QFN, 7 mm x 7 mm
Jenis Pemasangan Surface Mount Surface mount
Suhu Operasi 0C to +70C (commercial grade, CC suffix) —
Aras MSL 3 —
Status RoHS Compliant [DATA_NEEDED: RoHS status]
Supported Speeds — 10 Mbps, 100 Mbps, and 1 Gbps
Supported Ethernet Modes — 10Base-T, 100Base-TX, and 1000Base-T
Host Interface — RGMII
Data Path — 4-wire full-duplex Ethernet
Supply Voltage Options — 1.8 V, 2.5 V, and 3.3 V
Analog Core Supply — 1.2 V
Cable Diagnostics — LinkMD
Time-Domain Reflectometry Diagnostics — Supported TDR-based cable testing
Mode Configuration — MODE[3:0] strap inputs
Hardware Reset Input — RESET_N, pin 42
Automotive Qualification — Automotive qualified
AVDDL Bulk Capacitance — 10 uF
AVDDL Local Decoupling — 0.1 uF per AVDDL pin
AVDDL Ferrite Bead Impedance — 100 ohm to 220 ohm at 100 MHz
Gambaran Suhu Operasi — [DATA_NEEDED: operating temperature range]
REACH Status — [DATA_NEEDED: REACH status]

Laporan Datasheet & Sumber

Lihat Semua Produk Buat BOQ Minta Bao Harga