LM2901VNG vs LM2901N Karşılaştırma
Ayrıntılı yan yana karşılaştırma LM2901VNG tarafından onsemi ve LM2901N tarafından Texas InstrumentsAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Özellik Karşılaştırması
| Parametre | LM2901VNG | LM2901N |
|---|---|---|
| Marka | onsemi | Texas Instruments |
| Kategori | Amplifier ICs | Amplifier ICs |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Comparator Type | 4 independent general-purpose voltage comparators | Quad differential comparator |
| Number of Channels | 4 channels | 4 channels |
| Single-Supply Operating Range | 3 V to 36 V | — |
| Dual-Supply Operating Range | ±1.5 V to ±18 V | — |
| Maximum Supply Voltage | 36 V | 36 V |
| Çıkış Türü | Open collector | Open collector |
| Logic Compatibility | TTL, CMOS, and MOS compatible | TTL, DTL, MOS, ECL, and CMOS output compatibility |
| Maximum Input Bias Current | 0.25 µA | — |
| Input Offset Voltage | [DATA_NEEDED: maximum input offset voltage] | [DATA_NEEDED: input offset voltage] |
| Input Offset Current | [DATA_NEEDED: maximum input offset current] | ±5.0 nA typical |
| Propagation Delay | [DATA_NEEDED: propagation delay] | — |
| Durağan Akım | [DATA_NEEDED: quiescent current] | — |
| Common-Mode Input Range | [DATA_NEEDED: common-mode input voltage range] | — |
| İşletim Sıcaklığı Aralığı | [DATA_NEEDED: operating temperature range] | — |
| Paket | 14-pin PDIP | 14-pin DIP |
| Montaj Türü | Through hole | Through hole |
| Packaging | Tube | — |
| RoHS Durumu | [DATA_NEEDED: RoHS status] | unknown |
| REACH Status | [DATA_NEEDED: REACH status] | unknown |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Supply Configuration | — | Single or split supply |
| Input Bias Current | — | 25 nA typical |
| Supply Current Drain | — | 800 µA typical |
| İşletim Sıcaklığı | — | -40 °C to +85 °C |
| Input Common-Mode Range | — | [DATA_NEEDED: input common-mode voltage range] |
| Output Saturation Voltage | — | [DATA_NEEDED: output saturation voltage] |
| Response Time | — | [DATA_NEEDED: comparator response time] |
| Output Sink Current | — | [DATA_NEEDED: output sink current] |
| AEC-Q100 Qualification | — | not_applicable |