LM2901VNG vs LM2901N Comparación
Comparación detallada lado a lado de LM2901VNG por onsemi y LM2901N por Texas Instruments. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Comparación de especificaciones
| Parámetro | LM2901VNG | LM2901N |
|---|---|---|
| Marca | onsemi | Texas Instruments |
| Categoría | Amplifier ICs | Amplifier ICs |
| Estado del ciclo de vida | Activo | Activo |
| Comparator Type | 4 independent general-purpose voltage comparators | Quad differential comparator |
| Number of Channels | 4 channels | 4 channels |
| Single-Supply Operating Range | 3 V to 36 V | — |
| Dual-Supply Operating Range | ±1.5 V to ±18 V | — |
| Maximum Supply Voltage | 36 V | 36 V |
| Tipo de salida | Open collector | Open collector |
| Logic Compatibility | TTL, CMOS, and MOS compatible | TTL, DTL, MOS, ECL, and CMOS output compatibility |
| Maximum Input Bias Current | 0.25 µA | — |
| Input Offset Voltage | [DATA_NEEDED: maximum input offset voltage] | [DATA_NEEDED: input offset voltage] |
| Input Offset Current | [DATA_NEEDED: maximum input offset current] | ±5.0 nA typical |
| Propagation Delay | [DATA_NEEDED: propagation delay] | — |
| Corriente en reposo | [DATA_NEEDED: quiescent current] | — |
| Common-Mode Input Range | [DATA_NEEDED: common-mode input voltage range] | — |
| Rango de temperatura de funcionamiento | [DATA_NEEDED: operating temperature range] | — |
| Encapsulado | 14-pin PDIP | 14-pin DIP |
| Tipo de montaje | Through hole | Through hole |
| Packaging | Tube | — |
| Estado RoHS | [DATA_NEEDED: RoHS status] | unknown |
| REACH Status | [DATA_NEEDED: REACH status] | unknown |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Supply Configuration | — | Single or split supply |
| Input Bias Current | — | 25 nA typical |
| Supply Current Drain | — | 800 µA typical |
| Temperatura de funcionamiento | — | -40 °C to +85 °C |
| Input Common-Mode Range | — | [DATA_NEEDED: input common-mode voltage range] |
| Output Saturation Voltage | — | [DATA_NEEDED: output saturation voltage] |
| Response Time | — | [DATA_NEEDED: comparator response time] |
| Output Sink Current | — | [DATA_NEEDED: output sink current] |
| AEC-Q100 Qualification | — | not_applicable |