MAX3483ECSA+ vs MAX3483ESA+ Karşılaştırma
Ayrıntılı yan yana karşılaştırma MAX3483ECSA+ tarafından Analog Devices ve MAX3483ESA+ tarafından Maxim IntegratedAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Analog Devices
MAX3483ECSA+ - 12Mbps RS-485/RS-422 Transceiver | Analog Devices
MAX3483ECSA+ ✓ AktifÖzellik Karşılaştırması
| Parametre | MAX3483ECSA+ | MAX3483ESA+ |
|---|---|---|
| Marka | Analog Devices | Maxim Integrated |
| Kategori | Interface ICs | Interface ICs |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Product Type | RS-485/RS-422 transceiver | RS-485/RS-422 transceiver |
| Besleme Gerilimi | 3.3 V | 3.3 V |
| Maximum Data Rate | 12 Mbps | 10 Mbps |
| Transceiver Configuration | 1 driver / 1 receiver, half-duplex | — |
| Bus Standard | RS-485 and RS-422 | — |
| ESD Protection, Human Body Model | ±15 kV | — |
| ESD Protection, IEC 1000-4-2 Contact Discharge | ±8 kV | — |
| ESD Protection, IEC 1000-4-2 Air Gap Discharge | ±15 kV | — |
| Logic Compatibility | 3.3 V operation with 5 V logic interoperability | — |
| Transmitter Edge Rate | Slew-rate limited | — |
| Paket | 8-pin SOIC | 8-SOIC |
| Montaj Türü | Surface mount | Surface mount |
| İşletim Sıcaklığı Aralığı | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Besleme Akımı | [DATA_NEEDED: supply current] | [DATA_NEEDED: supply current] |
| Receiver Input Impedance | [DATA_NEEDED: receiver input impedance] | — |
| Common-Mode Rejection | [DATA_NEEDED: common-mode rejection] | — |
| RoHS Durumu | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Verified Supply Range | — | 3 V to 3.6 V |
| Driver and Receiver Count | — | 1 driver and 1 receiver |
| Duplex Mode | — | Half-duplex |
| Interface Standards | — | RS-485 and RS-422 |
| Driver Architecture | — | Slew-rate limited |
| EMI Control | — | Slew-rate limitation reduces EMI and reflections |
| Low-Speed Error-Free Transmission | — | Up to 250 kbps |
| Power Architecture | — | 3.3V-powered, low-power transceiver |
| Operating Voltage | — | 3 V to 3.6 V |
| ESD Protection | — | [DATA_NEEDED: ESD protection rating for MAX3483ESA+] |
| Receiver Output Type | — | [DATA_NEEDED: receiver output type] |
| Termination Requirement | — | [DATA_NEEDED: termination and biasing details] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |
| Halogen-Free Status | — | [DATA_NEEDED: halogen-free status] |