MAX3485ESA+T vs SN65HVD73DGSR Karşılaştırma

Ayrıntılı yan yana karşılaştırma MAX3485ESA+T tarafından Analog Devices ve SN65HVD73DGSR tarafından Texas InstrumentsAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.

Texas Instruments
SN65HVD73DGSR SN65HVD73DGSR - 3.3V Full-Duplex RS-485, 20Mbps, 12kV ESD | TI

SN65HVD73DGSR - 3.3V Full-Duplex RS-485, 20Mbps, 12kV ESD | TI

SN65HVD73DGSR ✓ Aktif

Özellik Karşılaştırması

Parametre MAX3485ESA+T SN65HVD73DGSR
Marka Analog Devices Texas Instruments
Kategori Interface ICs Interface ICs
Yaşam Döngüsü Durumu Aktif Aktif
Product Type RS-485/RS-422 transceiver RS-485 / RS-422 Full-Duplex Transceiver
Besleme Gerilimi 3.3 V —
Maximum Data Rate 10 Mbps —
Driver Count 1 —
Receiver Count 1 —
Duplex Mode Half-duplex —
Supported Standards RS-422 and RS-485 —
Paket 8-SOIC VSSOP-10 (DGS), 3.00 mm × 3.00 mm, PowerPAD
Package Dimensions 3.90 mm width —
Montaj Türü Surface mount Surface Mount
Ordering Package Tape and reel —
İşletim Sıcaklığı Aralığı [DATA_NEEDED: operating temperature range] -40 °C to +125 °C
Besleme Akımı [DATA_NEEDED: supply current] —
Driver Propagation Delay [DATA_NEEDED: driver propagation delay] —
Receiver Propagation Delay [DATA_NEEDED: receiver propagation delay] —
ESD Protection [DATA_NEEDED: ESD protection rating] —
Common-Mode Voltage Range [DATA_NEEDED: receiver common-mode voltage range] [DATA_NEEDED: -7 V to +12 V typical]
RoHS Compliance [DATA_NEEDED: RoHS compliance status] —
REACH Compliance [DATA_NEEDED: REACH compliance status] —
Part Number — SN65HVD73DGSR
Manufacturer — Texas Instruments
Supply Voltage (VCC) — 3.0 V to 3.6 V
Data Rate (max) — 20 Mbps
Number of Drivers / Receivers — 1 / 1
Duplex — Full
Receiver Hysteresis — [DATA_NEEDED: typical receiver hysteresis in mV]
ESD Protection - HBM (bus pins) — ±30 kV
ESD Protection - IEC 61000-4-2 Contact (bus pins) — ±12 kV
Unit Load — 1/8 (up to 256 nodes)
RoHS Durumu — Compliant
MSL Seviyesi — [DATA_NEEDED: MSL rating per JEDEC J-STD-020]
Enable Pins — DE (driver enable, active-high); RE (receiver enable, active-low)

Dökümanlar & Kaynaklar

Tüm Ürünleri Gözden Geçir BOM Oluştur Teklif İsteyin