MPVZ5010G7U vs MP3V5004GVP Karşılaştırma

Ayrıntılı yan yana karşılaştırma MPVZ5010G7U tarafından NXP Semiconductors ve MP3V5004GVP tarafından NXP SemiconductorsAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.

NXP Semiconductors
MPVZ5010G7U MPVZ5010G7U - 10 kPa Vented Gauge Pressure Sensor, 8-DIP | NXP

MPVZ5010G7U - 10 kPa Vented Gauge Pressure Sensor, 8-DIP | NXP

MPVZ5010G7U ✓ Aktif
NXP Semiconductors
MP3V5004GVP MP3V5004GVP - 0-3.92kPa Gauge Pressure Sensor, 3V, SOP-8 | NXP

MP3V5004GVP - 0-3.92kPa Gauge Pressure Sensor, 3V, SOP-8 | NXP

MP3V5004GVP ✓ Aktif

Özellik Karşılaştırması

Parametre MPVZ5010G7U MP3V5004GVP
Marka NXP Semiconductors NXP Semiconductors
Kategori Pressure Sensors Pressure Sensors
Yaşam Döngüsü Durumu Aktif Aktif
Pressure Type Vented Gauge Gauge
Operating Pressure Range 0 kPa to 10 kPa (0 to 1.45 PSI) 0 kPa to 3.92 kPa
Supply Voltage (Vcc) 4.75 V to 5.25 V (5 V typical) —
Besleme Akımı 10 mA (maximum) —
Analog Output Range 0.2 V to 4.7 V —
Accuracy ±1.5 %FS (0 °C to 85 °C) 5% over 0 to 80 C
Çıkış Türü Analog, ratiometric to Vcc Analog, ratiometric voltage
Response Time [DATA_NEEDED: response time ms] —
İşletim Sıcaklığı Aralığı 0 °C to +85 °C —
Compensated Temperature Range -10 °C to +60 °C —
Storage Temperature Range -30 °C to +100 °C [DATA_NEEDED: confirm exact storage spec] —
Paket 8-DIP Module (Case 1368-01, through-hole) SOP-8 (Small Outline Package)
Montaj Türü Through-Hole (DIP module with vent tube) Surface Mount
Sensor Technology Piezoresistive silicon micromachined —
Signal Conditioning On-chip, temperature compensated, calibrated —
MSL Seviyesi [DATA_NEEDED: MSL rating] —
RoHS Durumu [DATA_NEEDED: RoHS status] Compliant
Body Height 5.46 mm —
Pressure Resolution — Gage, ratiometric
Besleme Gerilimi — 2.7 V to 3.3 V (3 V typical)
Çıkış Gerilimi — 0.6 V to 3 V (ratiometric)
İşletim Sıcaklığı — 0 C to +85 C
Pressure Port — Bottom port (Case 482A)
Media Compatibility — Dry air, non-corrosive gases
On-Chip Signal Conditioning — Yes (amplification + temperature compensation)
Calibration — Factory calibrated
Lead-Free — Yes

Dökümanlar & Kaynaklar

Tüm Ürünleri Gözden Geçir BOM Oluştur Teklif İsteyin