PCM1795DBR vs PCM1796DBR Karşılaştırma

Ayrıntılı yan yana karşılaştırma PCM1795DBR tarafından Texas Instruments ve PCM1796DBR tarafından Texas InstrumentsAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.

Texas Instruments
PCM1795DBR PCM1795DBR - 32-Bit Stereo Audio DAC | Texas Instruments

PCM1795DBR - 32-Bit Stereo Audio DAC | Texas Instruments

PCM1795DBR ✓ Aktif

Özellik Karşılaştırması

Parametre PCM1795DBR PCM1796DBR
Marka Texas Instruments Texas Instruments
Kategori ADC/DAC ADC/DAC
Yaşam Döngüsü Durumu Aktif Aktif
Product Type Stereo audio digital-to-analog converter (DAC) —
DAC Resolution 32 bit —
Number of DAC Channels 2 channels —
Maximum Sampling Rate 200 kHz 192 kHz
Nominal PCM Sampling Rate 192 kHz —
DSD Playback Support Up to 200 kHz —
DAC Architecture Advanced segment Advanced segment DAC
Analog Outputs 2 balanced current outputs —
Digital Control Interfaces I2C, SPI, and TDMCA —
Typical Signal-to-Noise Ratio 123 dB —
Typical Common-Mode Rejection 123 dB —
Analog Supply Voltage 5 V for VCC1, VCC2L, and VCC2R —
Digital Supply Voltage 3.3 V for VDD —
Manufacturer Test Sampling Rate 48 kHz —
Manufacturer Test System Clock 256 fS —
Manufacturer Test Data Width 32 bit —
Paket 28-pin SSOP 28-lead SSOP (DBR), 208 mil
Device Technology CMOS monolithic integrated circuit —
Montaj Türü Surface mount Surface Mount
Device Type — Stereo audio digital-to-analog converter (DAC)
Çözünürlük — 24 bit
DSD Support — Up to 200 kHz DSD
Kanallar — 2 (stereo)
Çıkış Türü — Balanced current output (differential)
Digital Interface — Serial 3-wire (LRCK, BCK, DATA)
Clock Jitter Tolerance — Improved tolerance to clock jitter (segment DAC architecture)
Özellikler — Programmable gain; digital filtering; differential output
RoHS Durumu — Compliant
Analog Performance Measurement — System Two Cascade audio measurement system, averaging mode
SNR Measurement Condition — 20-Hz HPF, 20-kHz AES17 LPF, A-weighted
Dynamic Range Measurement Condition — 20-Hz HPF, 20-kHz AES17 LPF, A-weighted
Channel Separation Measurement Condition — 20-Hz HPF, 20-kHz AES17 LPF, A-weighted
Process Technology — Monolithic CMOS integrated circuit
İşletim Sıcaklığı Aralığı — [DATA_NEEDED: operating temperature range]
Total Harmonic Distortion plus Noise — [DATA_NEEDED: THD+N at 1 kHz, 0 dBFS]
Signal-to-Noise Ratio — [DATA_NEEDED: A-weighted SNR, 192 kHz, 0 dBFS]
Supply Voltage Range — [DATA_NEEDED: analog and digital supply voltage range]

Dökümanlar & Kaynaklar

Tüm Ürünleri Gözden Geçir BOM Oluştur Teklif İsteyin