PCM1795DBR vs PCM1796DBR 对比
详细并排对比 PCM1795DBR 出自 Texas Instruments 和 PCM1796DBR 出自 Texas Instruments。对比关键规格、电气参数、封装、生命周期状态、价格和供货情况,以确定最适合您设计需求的元器件。
规格对比
| 参数 | PCM1795DBR | PCM1796DBR |
|---|---|---|
| 品牌 | Texas Instruments | Texas Instruments |
| 分类 | ADC/DAC | ADC/DAC |
| 生命周期状态 | 有效 | 有效 |
| Product Type | Stereo audio digital-to-analog converter (DAC) | — |
| DAC Resolution | 32 bit | — |
| Number of DAC Channels | 2 channels | — |
| Maximum Sampling Rate | 200 kHz | 192 kHz |
| Nominal PCM Sampling Rate | 192 kHz | — |
| DSD Playback Support | Up to 200 kHz | — |
| DAC Architecture | Advanced segment | Advanced segment DAC |
| Analog Outputs | 2 balanced current outputs | — |
| Digital Control Interfaces | I2C, SPI, and TDMCA | — |
| Typical Signal-to-Noise Ratio | 123 dB | — |
| Typical Common-Mode Rejection | 123 dB | — |
| Analog Supply Voltage | 5 V for VCC1, VCC2L, and VCC2R | — |
| Digital Supply Voltage | 3.3 V for VDD | — |
| Manufacturer Test Sampling Rate | 48 kHz | — |
| Manufacturer Test System Clock | 256 fS | — |
| Manufacturer Test Data Width | 32 bit | — |
| 封装 | 28-pin SSOP | 28-lead SSOP (DBR), 208 mil |
| Device Technology | CMOS monolithic integrated circuit | — |
| 安装类型 | Surface mount | Surface Mount |
| Device Type | — | Stereo audio digital-to-analog converter (DAC) |
| 分辨率 | — | 24 bit |
| DSD Support | — | Up to 200 kHz DSD |
| 通道数 | — | 2 (stereo) |
| 输出类型 | — | Balanced current output (differential) |
| Digital Interface | — | Serial 3-wire (LRCK, BCK, DATA) |
| Clock Jitter Tolerance | — | Improved tolerance to clock jitter (segment DAC architecture) |
| 特性 | — | Programmable gain; digital filtering; differential output |
| RoHS 状态 | — | Compliant |
| Analog Performance Measurement | — | System Two Cascade audio measurement system, averaging mode |
| SNR Measurement Condition | — | 20-Hz HPF, 20-kHz AES17 LPF, A-weighted |
| Dynamic Range Measurement Condition | — | 20-Hz HPF, 20-kHz AES17 LPF, A-weighted |
| Channel Separation Measurement Condition | — | 20-Hz HPF, 20-kHz AES17 LPF, A-weighted |
| Process Technology | — | Monolithic CMOS integrated circuit |
| 工作温度范围 | — | [DATA_NEEDED: operating temperature range] |
| Total Harmonic Distortion plus Noise | — | [DATA_NEEDED: THD+N at 1 kHz, 0 dBFS] |
| Signal-to-Noise Ratio | — | [DATA_NEEDED: A-weighted SNR, 192 kHz, 0 dBFS] |
| Supply Voltage Range | — | [DATA_NEEDED: analog and digital supply voltage range] |