Analog Devices

AD711AQ - High-Speed Precision BiFET Op Amp | Analog Devices

MPN: AD711AQ ✓ Aktif
0.25 mV maximum for AD711C Vdss 8-CERDIP Package
MOQ: 1 |

AD711AQ Genel Bakış

The Analog Devices AD711AQ is a high-speed, precision monolithic BiFET operational amplifier with a minimum slew rate of 16 V/us, a minimum unity-gain bandwidth of 3 MHz for the AD711J grade, and an 8-CERDIP package. Its laser-trimmed input stage provides low offset voltage and low offset-voltage drift, while the J-FET input architecture supports high input impedance and low bias current.

A BiFET operational amplifier is an amplifier built around junction-field-effect-transistor inputs. It combines the input impedance of a field-effect transistor with the gain and common-mode performance needed for precision analog signal conditioning. Within the broader hierarchy, the AD711AQ belongs to the operational-amplifier, analog-amplifier, and integrated-circuit categories and is commonly used for signal buffering, instrumentation, active filtering, and low-distortion voltage amplification.

The AD711 family is specified for fast settling and high slew rate. Published performance includes settling to 0.01% in 1.0 us and a minimum slew rate of 16 V/us. The manufacturer identifies the device as an enhanced replacement for LF411 and TL081 designs, providing an upgrade path for precision BiFET amplifier layouts whose original devices use older technology or bipolar input stages.

Precision is supported by laser wafer trimming, which reduces initial offset voltage and offset-voltage drift. For the AD711C grade, the published maximum initial input offset voltage is 0.25 mV, the maximum offset drift is 4 V/C, and the minimum open-loop gain is 200 V/mV. Grade-specific limits must be selected from the manufacturer table that applies to the exact ordering code.

Typical uses include low-frequency instrumentation, audio and communications signal conditioning, active filters, transducers with relatively high source impedance, and general-purpose precision amplification. The 8-CERDIP construction is suited to equipment where a hermetically sealed ceramic package, stable operation, and long-term reliability are important.

When using the AD711AQ, preserve the standard bypass and feedback arrangements shown in the manufacturer datasheet. Check the ceramic-package lead geometry, operating supply, input common-mode range, and output swing against the system limits. Laser trimming improves matching and stability, but it does not remove the need for careful grounding, supply bypassing, and signal-path layout.

This page organizes the AD711AQ specifications, package information, drop-in family alternatives, application guidance, and design notes into an engineering-focused resource for evaluating the amplifier in precision analog systems.

Drop-in alternatifler için AD711AQ — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

AD711CQ

✅ Yerleştirme ⚠️ Onaylanmamış Özellikler
📦 8-CERDIP
16 V/us slew-rate class and 8-CERDIP footprint retained; grade-specific offset and drift limits differ

📋 Katalogda Olmayan Referans Alternatifi

AD711JQ

✅ Yerleştirme ⚠️ Onaylanmamış Özellikler
📦 8-CERDIP
16 V/us slew-rate class and 8-CERDIP footprint retained; grade-specific bandwidth, offset, and qualification limits differ

📋 Katalogda Olmayan Referans Alternatifi

AD711KQ

✅ Yerleştirme ⚠️ Onaylanmamış Özellikler
📦 8-CERDIP
16 V/us slew-rate class and 8-CERDIP footprint retained; grade-specific temperature and DC limits differ

📋 Katalogda Olmayan Referans Alternatifi

AD711NQ

✅ Yerleştirme ⚠️ Onaylanmamış Özellikler
📦 8-CERDIP
16 V/us slew-rate class and 8-CERDIP footprint retained; grade-specific offset, drift, and temperature limits differ

📋 Katalogda Olmayan Referans Alternatifi

AD711Q

✅ Yerleştirme ⚠️ Onaylanmamış Özellikler
📦 8-CERDIP
16 V/us slew-rate class and 8-CERDIP footprint retained; grade-specific offset and operating-temperature limits differ

📋 Katalogda Olmayan Referans Alternatifi

AD711AQ Maksimum Değerlendirmeler & Elektriksel Özellikler

Amplifier Type 1-circuit J-FET operational amplifier
Ağ Yapısı Precision monolithic BiFET operational amplifier
Number of Circuits 1 circuit
Minimum Slew Rate 16 V/us
Unity-Gain Bandwidth 3 MHz minimum for AD711J
Settling Time 0.01% in 1.0 us
Input Offset Voltage 0.25 mV maximum for AD711C
Input Offset Voltage Drift 4 V/C maximum for AD711C
Open-Loop Gain 200 V/mV minimum for AD711C
Input Noise Voltage 4 V p-p maximum
Paket 8-CERDIP
Montaj Türü Through-hole ceramic dual in-line package
Input Trim Technology Laser wafer trimming

AD711AQ 8-cerdip Pin Yapısı Kılavuzu

AD711AQ (8-cerdip paket) için pin yapısı. Bu analog bileşen, giriş, çıkış ve güç besleme pinleri içerir. Ofset null, telafi ve etkinleştirme pin yapılandırmaları için üretici veri kitapçığını referans alın. Sinyal işleme ve güç amplifikasyon devreleri için mükemmel bir bileşendir.

8-cerdip paket pin çizelgesi için AD711AQ

Ayrıntılı pin çıkış verisi mevcut değil: AD711AQ.

Aşağıdaki veri sayfası tam pin konfigürasyonu için.

Tipik Uygulamalar

AD711AQ için uygundur 6 uygulamas: Precision Instrumentation Amplification, Active Filter Design, Audio Signal Conditioning, Communications Receive Path, High-Impedance Sensor Buffer, Precision Voltage Reference Buffer.

🏭

Precision Instrumentation Amplification

The AD711AQ fits precision instrumentation front ends that amplify relatively small sensor signals while requiring controlled offset and good input impedance. Its BiFET input architecture avoids the low input resistance associated with bipolar-input amplifiers, while laser trimming reduces initial offset voltage and drift. The family-level 16 V/us minimum slew rate provides ample response for slow industrial signals and lower-bandwidth measurement chains. In a practical implementation, the amplifier can follow a transducer and active-filter stage, but the designer should verify input common-mode range and output swing against the exact grade table before selecting gain.

🔧

Active Filter Design

The AD711AQ is useful in active-filter circuits requiring a high-input-impedance amplifier and controlled DC behavior. Its minimum 16 V/us slew rate helps preserve large-signal behavior as filter gain and cutoff frequency increase, while the 3 MHz minimum unity-gain bandwidth associated with the AD711J grade provides a basis for gain-bandwidth planning. Place the amplifier within the feedback network to minimize loading on the filter node, and keep the ceramic-package leads short where practical. Before finalizing a high-Q section, check op-amp noise, open-loop gain, and component tolerances in the exact manufacturer electrical table.

🎧

Audio Signal Conditioning

The AD711AQ can condition low-frequency audio signals when low input bias current, high input impedance, and precision offset behavior are more important than minimum cost. Its 16 V/us minimum slew rate provides headroom for full-scale audio waveforms, while the 0.01% settling characteristic supports accurate envelope, monitoring, or return-path amplification. As a BiFET amplifier, it can interface effectively with high-impedance source networks without loading them heavily. Designers should still verify output swing, supply range, noise spectrum, and channel-to-channel matching using the exact AD711AQ grade limits.

🌐

Communications Receive Path

The AD711AQ is suitable for low-frequency communications receive circuitry where a high-impedance input stage and controlled offset help preserve weak signals. Its minimum 16 V/us slew rate supports faster edge recovery than a general-purpose precision amplifier, and the laser-trimmed input reduces offset variation caused by production processing. The amplifier can follow an RF detector or transducer in a baseband filter chain. Keep the input trace short, maintain a stable reference ground, and verify the common-mode operating window so that signal excursions do not approach the input limits.

🩺

High-Impedance Sensor Buffer

The AD711AQ works well as a buffer for sensors whose source impedance would load a bipolar-input amplifier or a low-impedance measurement network. J-FET inputs provide high input impedance and low bias current, while the laser-trimmed offset stage improves signal integrity for slow or precision measurements. Its 16 V/us minimum slew rate also allows the same amplifier to handle command transients after a sensor event. Select the feedback network to preserve bandwidth and stability, confirm the maximum input bias current for the grade, and provide clean grounding around the sensor interface.

📡

Precision Voltage Reference Buffer

The AD711AQ can buffer a low-current voltage reference when the reference source cannot drive the required load capacitance and the application needs low offset variation. The high-impedance BiFET input minimizes reference loading, while the amplifier's 16 V/us minimum slew rate improves recovery after capacitive loading or load switching. Care is required because a buffered reference can still suffer offset drift and noise correlated with the amplifier. Check reference drive capability, DC output accuracy, capacitive-load stability, and power-supply bypass requirements before treating the amplifier as a transparent buffer.

Önerilen Ürünler Özeti

LF411 Datasheet-named legacy precision BiFET amplifier predecessor Kullanıldığı Yer: Precision Instrumentation Amplification, High-Impedance Sensor Buffer TL081 Datasheet-named legacy precision amplifier predecessor Kullanıldığı Yer: Precision Instrumentation Amplification, Audio Signal Conditioning AD711J Family grade identified with a 3 MHz minimum unity-gain bandwidth Kullanıldığı Yer: Active Filter Design AD711Q Pin-compatible AD711-family grade Kullanıldığı Yer: Active Filter Design, Precision Voltage Reference Buffer AD711JQ AD711-family amplifier for audio and communications signal paths Kullanıldığı Yer: Audio Signal Conditioning, Precision Voltage Reference Buffer AD711CQ AD711-family precision amplifier alternative Kullanıldığı Yer: Communications Receive Path AD711NQ AD711-family grade for qualified signal-chain designs Kullanıldığı Yer: Communications Receive Path AD711KQ AD711-family high-impedance precision amplifier alternative Kullanıldığı Yer: High-Impedance Sensor Buffer
What is the AD711AQ?
The AD711AQ is a single-circuit, precision, high-speed BiFET operational amplifier from Analog Devices. It combines a minimum slew rate of 16 V/us with laser-trimmed low-offset performance and is offered in an 8-CERDIP package. According to the Analog Devices manufacturer datasheet, it is designed as an enhanced replacement for older LF411 and TL081 precision amplifier implementations.
Where can I download the AD711AQ datasheet PDF?
The official AD711AQ datasheet PDF is available from Analog Devices at https://www.analog.com/media/en/technical-documentation/data-sheets/AD711.pdf. The document contains the AD711 family electrical characteristics, ordering information, package drawings, pin descriptions, and grade-specific limits. The AD711AQ product page also links to the same manufacturer documentation and related resources.
What are the key specifications of AD711AQ that engineers should know?
The AD711AQ is a precision, high-speed BiFET operational amplifier with a minimum 16 V/us slew rate and 8-CERDIP package. The family also provides 0.01% settling in 1.0 us, while the AD711J grade has a 3 MHz minimum unity-gain bandwidth. According to the Analog Devices manufacturer datasheet, laser wafer trimming produces low offset voltage and low offset-voltage drift.
What is the AD711AQ pinout?
The AD711AQ uses an 8-CERDIP package and is a single operational amplifier. Use the pin-description table and package drawing in the Analog Devices manufacturer datasheet when assigning PCB connections. The public product material used for this page does not reproduce the complete numbered pin table, so verify every connection against the official document before fabrication.
Is AD711AQ suitable for precision signal conditioning?
Yes, the AD711AQ is suitable for precision signal conditioning where low offset and offset drift are important. Its BiFET input stage supports high input impedance, and the laser-trimmed circuit provides low initial offset voltage and low thermal drift. According to the Analog Devices manufacturer datasheet, the amplifier also offers a 16 V/us minimum slew rate for faster signal transitions.
What can replace the AD711AQ?
The closest documented alternatives are other AD711 family order codes that retain the 8-CERDIP footprint and operational-amplifier function. These include AD711CQ, AD711JQ, AD711KQ, AD711NQ, and AD711Q. Grade-specific offset-voltage, drift, temperature, and qualification limits can differ, so confirm the complete AD711-SPECIFICATIONS table before treating any candidate as an unqualified drop-in replacement.
Is AD711AQ the same as AD711Q?
AD711AQ and AD711Q share the AD711 amplifier family and 8-CERDIP package, but their ordering suffixes can identify different commercial, military, or temperature grades. The important distinction is the published electrical specification associated with each suffix. According to the Analog Devices manufacturer datasheet, use the exact grade table to compare offset voltage, drift, temperature range, and qualification requirements.
When should I choose AD711AQ over another AD711 grade?
Choose AD711AQ when the system requires the AD711 family's precision BiFET performance, 16 V/us minimum slew rate, and 8-CERDIP construction together with the electrical limits assigned to the AQ ordering code. Choose another AD711 grade when its temperature rating, offset specification, qualification level, or availability better matches the equipment. The exact grade differences must be read from the manufacturer ordering table.
AD711AQ vs AD711JQ - which is better for instrumentation?
AD711AQ is the better choice when the instrumentation design specifically requires the AQ grade's published electrical limits and 8-CERDIP package. AD711JQ may suit a different grade or qualification requirement, but its suitability cannot be determined from the MPN alone. According to the Analog Devices manufacturer datasheet, compare offset voltage, drift, bandwidth, temperature range, and package construction for both exact order codes.
What is the best AD711-family drop-in replacement for AD711AQ?
AD711CQ is the most direct family candidate because it retains the AD711 design and 8-CERDIP package while changing the ordering grade. Pin compatibility does not guarantee identical DC behavior, however, and offset, drift, temperature, and qualification limits must be checked. The Analog Devices manufacturer datasheet should be used to confirm suitability before releasing the substitute into production.
What is the best cross-brand equivalent for AD711AQ?
No cross-brand 8-CERDIP equivalent can be confirmed from the available manufacturer and cross-reference information for this page. The Analog Devices documentation identifies LF411 and TL081 as upgrade precedents, but that alone does not establish an exact package, pin, and specification match. Treat those devices as design references, then verify any proposed replacement against its manufacturer datasheet and your qualification requirements.
How much power does the AD711AQ dissipate?
Power dissipation must be calculated from the actual supply voltage and quiescent supply current at the operating condition. The available manufacturer product information confirms that AD711AQ is a precision BiFET operational amplifier in an 8-CERDIP package, but it does not state the exact AD711AQ quiescent current in the cited text. Use the grade-specific electrical table and your actual supply voltage before sizing thermal paths.
What applications are suitable for the AD711AQ?
The AD711AQ is suitable for precision instrumentation, active filtering, low-frequency audio amplification, communications signal conditioning, and buffering of higher-impedance sensors. Its minimum 16 V/us slew rate supports relatively fast transitions, while laser-trimmed offset behavior improves precision. According to the Analog Devices manufacturer datasheet, the device can also upgrade existing LF411 and TL081-based amplifier circuits after compatibility checks.
How should I design the PCB around AD711AQ?
Place the input, feedback, output, and bypass connections to minimize parasitic resistance and capacitance, following the layout shown in the Analog Devices manufacturer datasheet. Keep sensitive input nodes away from high-current switching paths, use a low-noise ground strategy, and decouple supply pins close to the device. Through-hole ceramic construction also requires careful lead spacing and mechanical strain control.
Where can I buy AD711AQ and check its lead time?
Use the Request a Quote form on this page to request AD711AQ availability, current lead time, and order quantities. The official Analog Devices product page and the component listing confirm the AD711AQ ordering code and 8-CERDIP construction. Procurement should confirm the exact suffix, date codes, delivery packaging, and any applicable qualification requirements with the supplier before shipment.

Mühendislik referans verileri: AD711AQ — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Choose AD711AQ when a high-impedance precision amplifier is required in an 8-CERDIP design and the exact AQ grade's offset, drift, temperature, and qualification limits satisfy the equipment specification. Choose AD711CQ or AD711JQ when their published grade characteristics better match a controlled or qualified environment, and choose AD711KQ or AD711NQ when their specific temperature or qualification provisions are advantageous. AD711Q is the practical baseline family candidate when the same package and general amplifier performance are required. Do not select a replacement solely from the package code: compare the exact ordering rows, common-mode range, output swing, bandwidth, and environmental requirements. LF411 and TL081 are useful as upgrade-design references, but they are not confirmed drop-in substitutes for every AD711AQ application.

Alternatiflerle Karşılaştırma

Parametre Bu Ürün AD711CQ AD711JQ AD711KQ AD711NQ AD711Q
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Package 8-CERDIP 8-CERDIP - same 8-CERDIP - same 8-CERDIP - same 8-CERDIP - same 8-CERDIP - same
Amplifier Type Precision monolithic BiFET operational amplifier AD711 precision BiFET operational amplifier AD711 precision BiFET operational amplifier AD711 precision BiFET operational amplifier AD711 precision BiFET operational amplifier AD711 precision BiFET operational amplifier
Number of Circuits 1 circuit 1 circuit 1 circuit 1 circuit 1 circuit 1 circuit
Minimum Slew Rate 16 V/us 16 V/us family class 16 V/us family class 16 V/us family class 16 V/us family class 16 V/us family class
Settling Time 0.01% in 1.0 us 0.01% in 1.0 us family class 0.01% in 1.0 us family class 0.01% in 1.0 us family class 0.01% in 1.0 us family class 0.01% in 1.0 us family class
Qualification and Temperature Grade AD711AQ ordering-grade limits Different ordering-grade limits Different ordering-grade limits Different ordering-grade limits Different ordering-grade limits Different ordering-grade limits

Ana Farklılayıcılar

  • Higher slew rate than legacy LF411 and TL081 upgrade references (karşılaştırma:LF411)
  • Precision laser trimming (karşılaştırma:TL081)
  • Broad same-family replacement path without changing the footprint (karşılaştırma:AD711Q)

Tasarım Notları

Use the Analog Devices manufacturer datasheet pin-description table and package drawing to assign all eight ceramic-DIP connections. Keep the feedback loop short, avoid routing sensitive input signals beneath the device, and place supply bypass components close to the relevant supply pins. Because the package is through-hole ceramic rather than a surface-mount package, use compliant lead spacing and provide mechanical support when the assembly experiences vibration or repeated connector loading.

The AD711AQ's 16 V/us minimum slew rate and 0.01% settling in 1.0 us make it suitable for faster signal edges than a conventional precision amplifier. Nevertheless, high closed-loop gain reduces usable bandwidth and can increase overshoot or ringing. Check the gain-bandwidth relationship, verify the feedback-network impedance, and place feedback components close to the amplifier. Validate the complete channel with a scope because parasitic capacitance in ceramic-DIP wiring can materially affect high-Q and high-gain configurations.

Do not treat every AD711 order code as electrically identical merely because it uses an 8-CERDIP package. Grade suffixes can change offset voltage, offset drift, temperature range, qualification, or other limits. Compare the exact ordering rows in the Analog Devices manufacturer datasheet, especially for AD711AQ versus AD711CQ, AD711JQ, AD711KQ, AD711NQ, and AD711Q, before approving a substitution. Also verify supply voltage, input common-mode range, and output swing in the intended operating condition.

Estimated thermal design should begin with the actual supply voltage and quiescent current for the exact AD711AQ grade: P_DISSIPATION = V_SUPPLY x I_QUIESCENT. Use that result together with the ceramic package's thermal resistance and the application's ambient temperature. The numerical result is a design estimate rather than a manufacturer maximum. Keep airflow and copper paths appropriate for the computed dissipation, and verify the final junction temperature under worst-case supply, load, and temperature conditions.

Uyumluluk Bilgisi

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Kadmiyumdan Arınmış
Unknown
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

No specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals statement was identified for AD711AQ in the manufacturer and distributor material used for this page. AEC-Q100 is not applicable because the product is an analog operational amplifier rather than an automotive-qualified semiconductor.

Veri doğrulanma tarihi: 2026-11-06 — XAIPART bileşen mühendislik ekibi tarafından doğrulanmış ve derlenmiş veri

İlgili Aramalar

ad711aq analog devices AD711AQ datasheet AD711AQ datasheet pdf AD711AQ pinout AD711AQ 8-CERDIP AD711AQ specifications AD711AQ slew rate AD711AQ application circuit AD711AQ equivalent AD711AQ replacement AD711AQ vs AD711Q AD711AQ price AD711AQ stock Analog Devices AD711AQ

İlgili Bileşenler ve Terimler

Analog Devices AD711AQ AD711CQ AD711JQ AD711KQ AD711NQ AD711Q AD711J AD711C LF411 TL081 BiFET operational amplifier J-FET input amplifier precision operational amplifier analog amplifier integrated circuit semiconductor slew rate unity-gain bandwidth settling time input offset voltage offset voltage drift open-loop gain laser wafer trimming 8-CERDIP
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle