Analog Devices

LT1126CJ8 - 65MHz Dual Op Amp | Analog Devices

MPN: LT1126CJ8 ✓ Aktif
8-CERDIP Package
MOQ: 1 |

LT1126CJ8 Genel Bakış

The Analog Devices LT1126CJ8 is a dual, decompensated, general-purpose operational amplifier with a 65 MHz gain-bandwidth product and an 11 V/µs slew rate, housed in an 8-CERDIP through-hole package. It combines low-noise precision-amplifier characteristics with the enhanced alternating-current performance associated with decompensated operation. The device contains two amplifiers in one package and is intended for applications requiring higher speed and bandwidth than the LT1124 and LT1125 families.

An operational amplifier is a voltage-feedback amplifier that uses high open-loop gain to compare an input signal with a feedback network. The LT1126 belongs to the precision-op-amp, voltage-feedback amplifier, signal-conditioning IC, and power-management-support hierarchy. Decompensation deliberately reduces closed-loop stability at lower gain in exchange for faster large-signal behavior and wider bandwidth, making this family useful in high-speed instrumentation and signal-processing paths.

The principal performance figures are a 65 MHz gain-bandwidth product and an 11 V/µs slew rate. Its dual configuration supports two independent signal channels, while the 8-CERDIP package provides through-hole construction for industrial and legacy equipment. The family description also identifies low-voltage noise, high voltage gain, low offset voltage, and low supply-current-per-amplifier characteristics. These features make the LT1126 appropriate where amplifier accuracy must coexist with rapid signal transitions.

Decompensated operation requires the circuit designer to select a suitable noise gain and verify stability at the intended closed-loop gain. At unity gain, the amplifier is typically decompensated and may require external compensation or a higher noise-gain setting. Component tolerances, capacitive loading, and the feedback network should therefore be evaluated together rather than relying only on the nominal gain-bandwidth product.

Typical uses include low-level signal conditioning, precision measurement systems, active filtering, data acquisition, instrumentation, and industrial control. The dual package can also reduce board area when a design needs two amplifiers with consistent performance. Its combination of 65 MHz bandwidth and 11 V/µs slew rate is particularly relevant to wideband transimpedance, buffer, and feedback-network designs where the LT1124 or LT1125 would provide less AC performance.

Designers should use the manufacturer pin-description table when assigning PCB connections and should confirm stability at every intended gain and capacitive-load condition. Input and output buffering, power-supply bypassing, grounding, and output-load limits remain important. The ceramic DIP construction also requires adequate board spacing and through-hole assembly planning, particularly where long leads can add parasitic inductance at high frequency.

This product record combines the verified LT1126 family specifications with application-focused engineering guidance, practical stability considerations, package information, and a comparison of available same-family temperature-grade alternatives. It is intended to help engineers evaluate the LT1126CJ8 for dual-channel precision signal paths while distinguishing the industrial-grade CJ8 version from related ceramic-DIP variants.

Drop-in alternatifler için LT1126CJ8 — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

LT1126EJ8

✅ Yerleştirme ⚠️ Onaylanmamış Özellikler
📦 8-CERDIP
The temperature-grade suffix changes from CJ8 to EJ8 while the 8-terminal ceramic-DIP package and 65 MHz, 11 V/µs core performance remain the same.

📋 Katalogda Olmayan Referans Alternatifi

LT1126GJ8

✅ Yerleştirme ⚠️ Onaylanmamış Özellikler
📦 8-CERDIP
The temperature-grade suffix changes from CJ8 to GJ8 while the 8-terminal ceramic-DIP package and 65 MHz, 11 V/µs core performance remain the same.

📋 Katalogda Olmayan Referans Alternatifi

LT1126CJ8 Maksimum Değerlendirmeler & Elektriksel Özellikler

Amplifier Type Dual general-purpose operational amplifier
Number of Circuits 2 circuits
Ağ Yapısı Decompensated voltage-feedback amplifier
Gain-Bandwidth Product 65 MHz
Slew Rate 11 V/µs
Paket 8-CERDIP
Montaj Türü Through-hole
Number of Terminals 8 terminals
Package Shape Rectangular
Temperature Grade Industrial

LT1126CJ8 rectangular Pin Yapısı Kılavuzu

LT1126CJ8 (rectangular paket) için pin yapısı. Bu analog bileşen, giriş, çıkış ve güç besleme pinleri içerir. Ofset null, telafi ve etkinleştirme pin yapılandırmaları için üretici veri kitapçığını referans alın. Sinyal işleme ve güç amplifikasyon devreleri için mükemmel bir bileşendir.

rectangular paket pin çizelgesi için LT1126CJ8

Ayrıntılı pin çıkış verisi mevcut değil: LT1126CJ8.

Aşağıdaki veri sayfası tam pin konfigürasyonu için.

Tipik Uygulamalar

LT1126CJ8 için uygundur 6 uygulamas: Precision Instrumentation Signal Conditioning, Active Filtering and Frequency Response, Wideband Data Acquisition, Low-Level Sensor Amplification, Industrial Control and Monitoring, Fast Buffering and Driver Circuits.

🏭

Precision Instrumentation Signal Conditioning

The LT1126CJ8 fits instrumentation front ends that must amplify small sensor signals while preserving fast transient performance. Its 65 MHz gain-bandwidth product provides bandwidth for signals well beyond audio frequencies, and the 11 V/µs slew rate limits large-signal distortion. The dual configuration allows one amplifier to condition a measurement and another to perform a related reference or buffer function. Because the device is decompensated, the engineer must select the required noise gain and verify compensation using the Analog Devices stability guidance before production release.

📡

Active Filtering and Frequency Response

The LT1126CJ8 is suitable for wideband active filters where the LT1124 and LT1125 would offer less AC performance. Its 65 MHz gain-bandwidth product leaves more bandwidth for closed-loop filter sections, while the 11 V/µs slew rate improves handling of large or fast signals. The two amplifiers can implement a matched pair of filter or buffering stages. Component tolerances and noise gain must be selected carefully because a decompensated amplifier can require a different closed-loop gain or compensation network than a unity-gain-stable precision op amp.

🖥️

Wideband Data Acquisition

The LT1126CJ8 can serve as the high-speed analog front end of a data-acquisition system when sampling bandwidth and settling behavior are important. A gain-bandwidth product of 65 MHz provides substantially more open-loop bandwidth than conventional precision amplifiers, and the 11 V/µs slew rate helps the output stage drive the required voltage excursion. Two amplifiers can provide simultaneous or sequential channels. The system designer should account for amplifier stability, sampling noise, input capacitance, and the dynamic range available from the downstream converter.

🧩

Low-Level Sensor Amplification

The LT1126CJ8 is appropriate for low-level sensor amplifiers that require both precision DC behavior and improved alternating-current response. The family combines low voltage noise, low offset voltage, and high voltage gain with a 65 MHz gain-bandwidth product, allowing sensor signals to be amplified without immediately forcing the circuit into a bandwidth-limited precision amplifier implementation. The dual package can handle a sensor channel and a reference channel, but bias-current error, input-common-mode range, sensor capacitance, and the required noise gain must all be evaluated against the operating conditions.

🏭

Industrial Control and Monitoring

The LT1126CJ8 is useful in industrial monitoring equipment that must process control signals rapidly while retaining the DC precision expected from instrumentation amplifiers. The industrial temperature-grade ordering code is suitable for evaluation against the product's environmental requirements, and the 8-CERDIP package supports through-hole assembly in legacy or industrial-control platforms. Two amplifiers can implement differential, gain, or buffer functions. Because the amplifier is decompensated, the feedback topology must preserve the required stable noise gain across temperature, supply, and component-tolerance variations.

⚡

Fast Buffering and Driver Circuits

The LT1126CJ8 can be used as a high-speed buffer or driver when the circuit benefits from the family's 11 V/µs slew rate and 65 MHz gain-bandwidth product. These characteristics are useful when driving a moderate load, isolating a sensitive source, or creating a higher-bandwidth signal path in a mixed analog system. The dual package provides two independent amplifiers for buffering and gain functions. Output-current capability, capacitive-load stability, settling time, and the external compensation requirements must be checked in the manufacturer datasheet before assigning the device to a specific load.

Önerilen Ürünler Özeti

LT1126 Dual precision op-amp family member Kullanıldığı Yer: Precision Instrumentation Signal Conditioning, Active Filtering and Frequency Response, Wideband Data Acquisition, Low-Level Sensor Amplification, Industrial Control and Monitoring, Fast Buffering and Driver Circuits LT1124 Lower-bandwidth dual op-amp family Kullanıldığı Yer: Precision Instrumentation Signal Conditioning, Wideband Data Acquisition, Low-Level Sensor Amplification, Industrial Control and Monitoring, Fast Buffering and Driver Circuits LT1127 Related quad decompensated op-amp family Kullanıldığı Yer: Precision Instrumentation Signal Conditioning, Active Filtering and Frequency Response, Wideband Data Acquisition, Low-Level Sensor Amplification, Fast Buffering and Driver Circuits LT1125 Quad family with lower AC performance Kullanıldığı Yer: Active Filtering and Frequency Response, Industrial Control and Monitoring
What is the LT1126CJ8?
The LT1126CJ8 is a dual, decompensated precision operational amplifier with a 65 MHz gain-bandwidth product and an 11 V/µs slew rate in an 8-CERDIP package. According to the Analog Devices LT1126 family description, it provides higher slew rate and bandwidth than the LT1124 and LT1125 while retaining enhanced direct-current characteristics. The CJ8 ordering code identifies the ceramic-DIP package and industrial temperature grade.
How fast is the LT1126CJ8 operational amplifier?
The LT1126CJ8 has a gain-bandwidth product of 65 MHz and a slew rate of 11 V/µs. According to the Analog Devices LT1126 product page, these AC characteristics distinguish it from the lower-bandwidth LT1124 and LT1125 families. The decompensated architecture supports faster closed-loop signal transitions when the circuit uses a stable noise gain and the feedback network is designed appropriately.
Where can I download the LT1126CJ8 datasheet PDF?
The LT1126CJ8 datasheet is available through the official Analog Devices LT1126 product page at https://www.analog.com/en/products/lt1126.html. Select the datasheet link on that page to obtain the manufacturer PDF. The document contains the authoritative pin description, electrical characteristics, compensation guidance, package dimensions, and ordering information for the LT1126 family.
Where can I find the LT1126CJ8 pinout?
Use the pin-description table and package drawing in the Analog Devices LT1126 manufacturer datasheet to identify every LT1126CJ8 connection. The verified catalog information identifies the device as an 8-CERDIP dual amplifier with eight terminals. Because the exact pin assignments are not reproduced on the product page, assign power, input, output, and compensation connections directly from the manufacturer diagram before laying out the PCB.
LT1126CJ8 vs LT1126EJ8 - which is the better choice?
Choose the LT1126CJ8 when the industrial-grade CJ8 ordering code specifically matches the required qualification and sourcing configuration. The LT1126EJ8 belongs to the same LT1126 family and ceramic-DIP pinout, but its temperature-grade ordering code is different. Both provide dual decompensated operation, 65 MHz bandwidth, and 11 V/µs slew rate; the decisive selection criterion is the required environmental grade.
When should I choose LT1126CJ8 over LT1126GJ8?
Choose the LT1126CJ8 when its industrial temperature-grade configuration satisfies the product requirements and you want to preserve the established CJ8 component designation. Select the LT1126GJ8 when the application needs the higher temperature capability associated with that family ordering code. Both use the same dual decompensated architecture and 8-CERDIP footprint, so temperature qualification should guide the decision.
Is the LT1126CJ8 suitable for precision measurement applications?
Yes, the LT1126CJ8 is suitable for precision measurement when its 65 MHz bandwidth, 11 V/µs slew rate, low-noise characteristics, and direct-current specifications satisfy the signal chain. According to the Analog Devices family description, it combines low voltage noise and low offset voltage with enhanced AC performance. Its decompensated architecture still requires verification of stability, noise gain, input bias effects, and system-level calibration.
What is the best drop-in replacement for LT1126CJ8?
The closest same-footprint replacements are the LT1126EJ8 and LT1126GJ8 because they remain in the LT1126 dual-amplifier family and use the 8-CERDIP package arrangement. The electrical performance figures match the target family at 65 MHz gain-bandwidth product and 11 V/µs slew rate. A cross-brand drop-in replacement should not be selected without manufacturer-level pin, compensation, bias-current, and stability verification.
Can an LT1126EJ8 replace an LT1126CJ8?
An LT1126EJ8 can replace an LT1126CJ8 only after confirming that the required operating-temperature range and full electrical specifications are acceptable for the installed design. It belongs to the same LT1126 dual-op-amp family and retains the 8-CERDIP package, but the ordering suffix indicates a different temperature-grade configuration. Check the manufacturer datasheet before treating it as a production substitute.
What is the best cross-brand equivalent for LT1126CJ8?
No cross-brand equivalent is designated as a confirmed drop-in replacement in the manufacturer and cross-reference information for the LT1126CJ8. The LT1126 is a decompensated precision amplifier, and equivalent performance alone is insufficient because stable operation depends on the exact pin arrangement, compensation approach, bias behavior, and selected closed-loop gain. Use the same-family CJ8, EJ8, or GJ8 options first, then validate any cross-brand candidate on a prototype.
Where to buy LT1126CJ8 online?
Use the Request a Quote form on this page to request LT1126CJ8 availability, current lead time, and commercial terms for the exact 8-CERDIP ordering code. The manufacturer lists the LT1126 family as a high-performance decompensated op-amp family. Before releasing a purchase request, confirm the package suffix, industrial temperature grade, quantity, and any required inspection or traceability documentation.
What is the lead time for LT1126CJ8?
The current LT1126CJ8 lead time should be confirmed through the Request a Quote form on this page. Lead time can vary with package, quantity, manufacturing status, and quality-document requirements, so a generic schedule is not reliable for an exact production order. Include your annual demand, target delivery date, and inspection requirements in the request for a useful commitment.
Is LT1126CJ8 in stock?
Current LT1126CJ8 stock should be requested through the Request a Quote form on this page. The part is an 8-CERDIP dual operational amplifier with an industrial temperature-grade ordering code, and availability may change with order quantity. Provide the required quantity, date code policy, packaging requirements, and shipping destination so the supplier can confirm the exact component configuration.
What is the price of LT1126CJ8?
Submit an LT1126CJ8 request through the Request a Quote form on this page for current commercial pricing. Pricing depends on exact ordering code, quantity, packaging, and market conditions, so a static figure can become stale. Include your forecast quantities and any required traceability documents when requesting a quotation to obtain a response tied to the production plan.
What are the key specifications of LT1126CJ8 that engineers should know?
The key LT1126CJ8 specifications are dual-amplifier operation, 65 MHz gain-bandwidth product, 11 V/µs slew rate, decompensated voltage-feedback architecture, and an 8-CERDIP through-hole package. According to the Analog Devices LT1126 family description, it also offers low voltage noise, low offset voltage, high voltage gain, and low supply current per amplifier. The ordering code identifies an industrial temperature grade.
Does LT1126CJ8 require external compensation?
The LT1126CJ8 must be operated in a stable closed-loop configuration because it is a decompensated amplifier. Its minimum recommended noise gain and any compensation component depend on the operating condition, so use the compensation guidance and stability plots in the Analog Devices datasheet. At lower closed-loop gains, include the manufacturer-prescribed compensation network and verify capacitive-load behavior on the assembled board.

Mühendislik referans verileri: LT1126CJ8 — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Choose the LT1126CJ8 when the design needs a dual precision operational amplifier with high-speed AC performance, an industrial temperature-grade designation, and an 8-CERDIP through-hole footprint. Its 65 MHz gain-bandwidth product and 11 V/µs slew rate are valuable when the LT1124 or LT1125 would limit signal bandwidth, although the decompensated architecture requires the correct stable noise gain and suitable compensation. Select the LT1126EJ8 when that family temperature grade better matches the operating environment while retaining the same package and core AC performance. Choose the LT1126GJ8 when its environmental rating is the appropriate family configuration. Neither temperature-grade change should be treated as a cross-brand substitution; validate offset, bias current, noise, common-mode range, output drive, and stability against the complete operating envelope before production release.

Alternatiflerle Karşılaştırma

Parametre Bu Ürün LT1126EJ8 LT1126GJ8
Package 8-CERDIP 8-CERDIP 8-CERDIP
Brand Analog Devices Analog Devices Analog Devices
Number of Amplifiers 2 circuits 2 circuits 2 circuits
Gain-Bandwidth Product 65 MHz 65 MHz 65 MHz
Slew Rate 11 V/µs 11 V/µs 11 V/µs
Amplifier Architecture Decompensated Decompensated Decompensated
Mounting Type Through-hole Through-hole Through-hole
Number of Terminals 8 terminals 8 terminals 8 terminals
Temperature-Grade Suffix CJ8 EJ8 GJ8

Ana Farklılayıcılar

  • Higher AC performance than the LT1124 dual family (karşılaştırma:LT1124)
  • Two amplifiers share one ceramic-DIP package (karşılaştırma:Single-amplifier ceramic-DIP alternatives)
  • Same-footprint temperature-grade choices (karşılaştırma:LT1126EJ8)

Tasarım Notları

Do not assume unity-gain stability. The LT1126 is decompensated, so the feedback network must establish the required stable noise gain. Follow the compensation guidance in the Analog Devices LT1126 datasheet and verify the final circuit with realistic tolerances and capacitive loading. A feedback change intended to improve signal gain can therefore make the amplifier oscillate or settle more slowly if compensation is not revisited.

Use the manufacturer pin-description table to assign the 8-CERDIP connections, and place local supply bypassing close to the device power pins. Keep analog input and feedback traces short, maintain a continuous ground reference, and route high-impedance nodes away from switching nodes. The through-hole ceramic package offers assembly flexibility, but lead inductance and long PCB traces can degrade stability at the LT1126's high bandwidth.

Treat the 65 MHz gain-bandwidth product and 11 V/µs slew rate as coupled design targets. Small-signal bandwidth does not by itself guarantee clean large-signal behavior, and the usable result also depends on gain, load capacitance, output amplitude, compensation, and settling tolerance. Use oscilloscope measurements at the intended output range and test the assembled PCB because parasitic capacitance and long feedback paths can change the response.

Uyumluluk Bilgisi

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Kadmiyumdan Arınmış
Unknown
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

The product listing identifies an industrial-grade dual op amp in an 8-CERDIP package, but it does not state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status.

İlgili Aramalar

LT1126CJ8 datasheet LT1126CJ8 pinout LT1126CJ8 datasheet pdf LT1126CJ8 equivalent LT1126CJ8 replacement LT1126CJ8 65 MHz LT1126CJ8 11 V/us LT1126CJ8 8-CERDIP LT1126CJ8 vs LT1126EJ8 LT1126CJ8 vs LT1126GJ8 Analog Devices LT1126CJ8 LT1126CJ8 price LT1126CJ8 stock LT1126CJ8 precision amplifier LT1126CJ8 compensation

İlgili Bileşenler ve Terimler

Analog Devices Linear Technology LT1126CJ8 LT1126 LT1126EJ8 LT1126GJ8 LT1124 LT1125 LT1127 Dual operational amplifier Precision operational amplifier Decompensated amplifier Voltage-feedback amplifier Signal-conditioning IC Gain-bandwidth product Slew rate Voltage noise Offset voltage Voltage gain Noise gain Compensation network 8-CERDIP Through-hole package Industrial instrumentation Data acquisition
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle