AD977ARS - 16-Bit 100 kSPS SAR ADC | Analog Devices
MPN: AD977ARS ✓ AktifAD977ARS Genel Bakış
An ADC is a data-acquisition IC that converts an analog voltage into a numeric code. The AD977 belongs to the successive-approximation, or SAR, ADC family within the broader data-converter and signal-processing semiconductor hierarchy. SAR converters compare the input against an internal DAC during successive conversion cycles, providing a practical balance of resolution, conversion speed, power consumption, and implementation complexity for precision measurement systems.
The AD977ARS offers 16-bit resolution, a 100 kSPS throughput rate, a single 5 V supply, and a factory-calibrated internal 2.5 V reference. Its selectable input ranges support systems requiring unipolar operation, bipolar operation, and externally referenced conversion. The serial output interface reduces the number of data pins required when connecting the converter to a digital controller or acquisition system.
The switched-capacitor ADC architecture samples the analog input and performs the successive-approximation conversion process. AD977 devices include an internal reference and are factory calibrated, while the serial interface is designed for reliable transfer of 16-bit conversion results. The AD977 family is configured for 100 kSPS throughput, whereas the closely related AD977A family operates at 200 kSPS.
Typical uses include industrial process measurement, instrumentation, data acquisition, communications equipment, audio and control systems, and embedded measurement modules. The 16-bit code width supports substantially more signal detail than lower-resolution converters when the analog front end, reference, excitation, and layout preserve the required precision.
Designers should account for input settling time, reference accuracy, source impedance, digital-interface timing, and the analog noise coupled into the conversion. A stable reference and appropriately bypassed supply are especially important in high-resolution designs because errors at these nodes can limit the useful accuracy of the converter.
This page organizes the key electrical characteristics, application guidance, pin-package information, and verified alternatives for the AD977ARS. It also highlights practical design constraints for using this 16-bit SAR ADC in precision acquisition systems.
Drop-in alternatifler için AD977ARS — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
Bu Serideki Variantlar
Yedek parça uyumlu olan aynı serideki modeller AD977ARS (aynı form faktörü ve ayağa oturma) — farklı olan Package, Factory Calibration, Throughput Rate, Conversion Architecture, Data Interface.
AD977AARS
✅ Yerleştirme ⚠️ Onaylanmamış ÖzelliklerFiyat için iletişime geçin
Veri Şablonunu Görüntüle →AD977ARZ
✅ Yerleştirme ⚠️ Onaylanmamış ÖzelliklerFiyat için iletişime geçin
Veri Şablonunu Görüntüle →AD977AARZ
✅ Yerleştirme ⚠️ Onaylanmamış Özellikler📋 Katalogda Olmayan Referans Alternatifi
AD977ARSZ
✅ Yerleştirme ⚠️ Onaylanmamış ÖzelliklerFiyat için iletişime geçin
Veri Şablonunu Görüntüle →AD977ARS Maksimum Değerlendirmeler & Elektriksel Özellikler
| ADC Type | Successive-approximation switched-capacitor ADC |
| Çözünürlük | 16 bit |
| Throughput Rate | 100 kSPS |
| Besleme Gerilimi | 5 V |
| Supply Configuration | Single supply |
| Internal Reference Voltage | 2.5 V |
| Input Channels | 1 channel |
| Data Interface | Serial interface |
| Unipolar Input Range | 0 V to 5 V or 0 V to 4 V |
| Bipolar Input Range | +/-5 V or +/-3.3 V |
| Factory Calibration | Factory calibrated |
| Maximum Power Dissipation | 100 mW |
| Power-Down Mode | Supported |
| Paket | 28-pin SSOP |
| Montaj Türü | Surface mount |
| Analog Input Type | Single-ended input |
| Conversion Architecture | SAR with switched-capacitor internal DAC |
AD977ARS 28-pin ssop Pin Yapısı Kılavuzu
AD977ARS (28-pin ssop paket) için pin yapısı. Bu analog bileşen, giriş, çıkış ve güç besleme pinleri içerir. Ofset null, telafi ve etkinleştirme pin yapılandırmaları için üretici veri kitapçığını referans alın. Sinyal işleme ve güç amplifikasyon devreleri için mükemmel bir bileşendir.
Ayrıntılı pin çıkış verisi mevcut değil: AD977ARS.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
AD977ARS için uygundur 6 uygulamas: Industrial Process Measurement, Precision Data Acquisition, Audio and Communications Measurement, Embedded Control and Monitoring, Automatic Test Equipment, Power and Energy Monitoring.
Industrial Process Measurement
The AD977ARS suits industrial process-control systems that monitor pressure, temperature, position, or slow-changing analog signals. Its 16-bit resolution provides 65,536 code levels, while the 100 kSPS throughput rate leaves margin for multiplexed sensor channels and periodic sampling. The single 5 V supply simplifies the power architecture, and the selectable ±5 V or ±3.3 V bipolar ranges can accommodate many conditioned sensor outputs. For reliable measurements, the analog front end should provide low-noise excitation, controlled source impedance, and protection against industrial transients. The converter's 2.5 V internal reference and factory calibration support repeatable conversion results, while correct reference and supply bypassing remain essential in a high-resolution measurement path.
Precision Data Acquisition
The AD977ARS is appropriate for laboratory, test, and industrial data-acquisition modules that require 16-bit resolution without the throughput of a very high-speed converter. Its 100 kSPS rate is sufficient for many pressure, level, flow, and position channels sampled repeatedly during a test cycle. The serial interface reduces PCB routing and connector count compared with a parallel-output architecture, while selectable unipolar and bipolar ranges support mixed signal-conditioning systems. Designers should budget acquisition and settling time around each conversion and place analog input and reference connections away from switching nodes. A stable 5 V rail, local bypass capacitors, and a quiet reference arrangement help preserve the benefit of the 16-bit code width.
Audio and Communications Measurement
The AD977ARS can serve as the conversion element in audio, communications, and signal-analysis equipment operating at moderate sample rates. A 16-bit converter provides substantially greater code resolution than lower-bit devices, which helps represent small signal changes after appropriate gain conditioning. The 100 kSPS throughput is suitable for supervisory, control, or analysis channels rather than full-bandwidth audio capture at conventional high sample rates. The serial output supports compact digital interconnection, and the multiple input ranges provide flexibility between sensor, receiver, and test-point interfaces. Signal-chain design should control gain, bandwidth, ground returns, and switching-induced noise because converter resolution alone cannot recover information lost in the analog front end.
Embedded Control and Monitoring
The AD977ARS can add high-resolution analog measurement to an embedded controller or monitoring system that needs more dynamic range than an 8-bit or 12-bit converter provides. Its 100 kSPS rate is appropriate for supervisory loops, actuator feedback, battery or power-system monitoring, and periodic sensor acquisition. The single 5 V operation and serial interface help limit board complexity and package footprint. Firmware should account for the converter's conversion cycle, data-valid timing, and configuration of the selected input range. For systems with multiple analog channels, analog multiplexing must preserve settling performance, and the selected reference and input network should avoid excessive temperature drift or parasitic loading.
Automatic Test Equipment
The AD977ARS is applicable in automatic test equipment that measures slow or medium-bandwidth analog nodes and converts them for comparison or logging. Its 16-bit resolution is beneficial when test limits are tight and measurement uncertainty must be reduced, while the 100 kSPS throughput supports repeated measurements without requiring a flash-speed ADC. The serial interface can connect cleanly to a controller, FPGA, or digital measurement subsystem. Fixture design remains important: connector leakage, relay transients, ground offsets, and long analog traces can degrade accuracy more than the converter itself. Use guarded routing, local reference bypassing, controlled analog grounding, and an input buffer appropriate for the source impedance and acquisition time.
Power and Energy Monitoring
The AD977ARS can be used in power-monitoring and energy-analysis equipment when higher-resolution feedback improves control-loop behavior or measurement quality. At 100 kSPS, it can capture supervisory, differential, current, or voltage information at a rate suited to many power-conversion and load-management systems. The ±3.3 V and ±5 V bipolar options are useful for conditioned shunt, differential, or sensor signals, while the 5 V single-supply architecture simplifies integration with mixed-signal controllers. Designers should avoid placing the converter directly across high- or fast-changing switching nodes without appropriate attenuation, filtering, isolation, or differential conditioning. Stable reference behavior and careful layout help prevent converter error from obscuring the power signal being measured.
Mühendislik referans verileri: AD977ARS — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün |
|---|---|
| Package | 28-pin SSOP |
| Brand | Analog Devices |
| Resolution | 16 bit |
| Throughput Rate | 100 kSPS |
| ADC Architecture | Successive-approximation switched-capacitor ADC |
| Supply Voltage | 5 V single supply |
| Internal Reference | 2.5 V |
| Input Ranges | 0 V to 5 V, 0 V to 4 V, ±5 V, and ±3.3 V |
| Data Interface | Serial |
| Maximum Power Dissipation | 100 mW |
Ana Farklılayıcılar
- Lower-throughput option within the related AD977 family (karşılaştırma:AD977A)
- Flexible input-range configuration (karşılaştırma:AD977A)
- Compact serial-interface integration (karşılaştırma:AD977A)
Tasarım Notları
Keep the analog input, reference, and ground paths compact and physically separated from digital clock and serial-data traces. Place the input and reference bypass capacitors close to their associated pins, use a quiet ground reference for the analog return path, and avoid routing high-current or switching signals beneath the converter. These layout practices reduce coupling into the 16-bit conversion and help the 2.5 V reference produce repeatable results.
Decouple the single 5 V supply at the device with capacitors selected according to the manufacturer recommendations and the impedance requirements of the intended sampling system. Verify startup, power-down, and operating current behavior in the final design. Because the AD977ARS is specified for maximum power dissipation of 100 mW, ensure the layout can distribute heat and keep the analog supply free of disturbances from unrelated loads.
Respect acquisition and settling time before initiating each conversion. Source resistance, input capacitance, multiplexer resistance, and protection-network leakage can all contribute to incomplete settling, particularly at 16-bit resolution. Validate the complete analog path rather than testing only the converter, and use a suitable input buffer when the source impedance is too high for the selected sampling network.
Do not confuse the AD977ARS with the faster AD977A when checking timing or preparing a replacement. The AD977ARS is specified at 100 kSPS, whereas the AD977A is specified at 200 kSPS. Also verify the selected unipolar or bipolar input range and the corresponding board configuration. Using incorrect range assumptions or an unsuitable reference connection can create clipping or systematic conversion error even when the serial data appears valid.
Uyumluluk Bilgisi
No specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals statement was identified for the AD977ARS. AEC-Q100 is not applicable because this is a precision data-converter IC rather than an automotive-qualified device.