Analog Devices

AD977ARS - 16-Bit 100 kSPS SAR ADC | Analog Devices

料号: AD977ARS ✓ 量产中
5 V Vdss 28-pin SSOP Package
最小起订量: 1 |

AD977ARS 概述

Analog Devices AD977ARS is a 16-bit successive-approximation analog-to-digital converter with a 100 kSPS throughput rate, operating from a single 5 V supply and housed in a 28-pin SSOP package. It accepts selectable unipolar and bipolar input ranges and provides a high-speed serial interface for data transfer.

An ADC is a data-acquisition IC that converts an analog voltage into a numeric code. The AD977 belongs to the successive-approximation, or SAR, ADC family within the broader data-converter and signal-processing semiconductor hierarchy. SAR converters compare the input against an internal DAC during successive conversion cycles, providing a practical balance of resolution, conversion speed, power consumption, and implementation complexity for precision measurement systems.

The AD977ARS offers 16-bit resolution, a 100 kSPS throughput rate, a single 5 V supply, and a factory-calibrated internal 2.5 V reference. Its selectable input ranges support systems requiring unipolar operation, bipolar operation, and externally referenced conversion. The serial output interface reduces the number of data pins required when connecting the converter to a digital controller or acquisition system.

The switched-capacitor ADC architecture samples the analog input and performs the successive-approximation conversion process. AD977 devices include an internal reference and are factory calibrated, while the serial interface is designed for reliable transfer of 16-bit conversion results. The AD977 family is configured for 100 kSPS throughput, whereas the closely related AD977A family operates at 200 kSPS.

Typical uses include industrial process measurement, instrumentation, data acquisition, communications equipment, audio and control systems, and embedded measurement modules. The 16-bit code width supports substantially more signal detail than lower-resolution converters when the analog front end, reference, excitation, and layout preserve the required precision.

Designers should account for input settling time, reference accuracy, source impedance, digital-interface timing, and the analog noise coupled into the conversion. A stable reference and appropriately bypassed supply are especially important in high-resolution designs because errors at these nodes can limit the useful accuracy of the converter.

This page organizes the key electrical characteristics, application guidance, pin-package information, and verified alternatives for the AD977ARS. It also highlights practical design constraints for using this 16-bit SAR ADC in precision acquisition systems.

直接替换替代料: AD977ARS ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

本系列中的变体

可与以下型号直接替换的同系列型号: AD977ARS (相同外形与封装尺寸) ——差异在于 Package, Factory Calibration, Throughput Rate, Conversion Architecture, Data Interface.

Analog Devices
Throughput Rate: 200 kSPS
Conversion Architecture: Successive approximation
对比 AD977ARS →
Analog Devices
Package: 28-SSOP
对比 AD977ARS →
Analog Devices
Package: 20-pin SOIC
Factory Calibration: Factory calibrated to minimize gain, offset, and nonlinearity errors
Data Interface: Serial
对比 AD977ARS →

AD977AARS

✅ 直接替换 ⚠️ 规格未核验
Analog Devices
📦 28-lead SSOP
16-bit successive-approximation ADC · 16 bit · 200 kSPS · 5 V · Single supply · 1 input · Successive approximation · Serial I/O

联系询价

查看数据手册 →

AD977ARZ

✅ 直接替换 ⚠️ 规格未核验
Analog Devices
📦 28-lead SSOP
16 bit · 100 kSPS · 1 input · Single-ended · Successive approximation, switched-capacitor · 4.75 V to 5.25 V · 5 V · 2.5 V

联系询价

查看数据手册 →

AD977AARZ

✅ 直接替换 ⚠️ 规格未核验
📦 28-lead SSOP
same die as AD977A with 200 kSPS throughput (+100% vs 100 kSPS) in the same 28-lead SSOP footprint; -Z is the lead-free/RoHS-compliant ordering code

📋 参考替代料(不在目录中)

AD977ARSZ

✅ 直接替换 ⚠️ 规格未核验
Analog Devices
📦 28-lead SSOP
16-bit successive-approximation ADC · 16 bit · 1 input · 100 kSPS · 5 V · 2.5 V · Successive-approximation, switched-capacitor ADC · High-speed serial interface

联系询价

查看数据手册 →

AD977ARS 最大额定值与电气特性

ADC Type Successive-approximation switched-capacitor ADC
分辨率 16 bit
Throughput Rate 100 kSPS
电源电压 5 V
Supply Configuration Single supply
Internal Reference Voltage 2.5 V
Input Channels 1 channel
Data Interface Serial interface
Unipolar Input Range 0 V to 5 V or 0 V to 4 V
Bipolar Input Range +/-5 V or +/-3.3 V
Factory Calibration Factory calibrated
Maximum Power Dissipation 100 mW
Power-Down Mode Supported
封装 28-pin SSOP
安装类型 Surface mount
Analog Input Type Single-ended input
Conversion Architecture SAR with switched-capacitor internal DAC

AD977ARS 28-pin ssop 引脚配置指南

AD977ARS(28-pin ssop 封装)的引脚配置。 该模拟元件具有输入、输出和电源引脚。请参阅制造商数据手册以了解失调调零、补偿和使能引脚配置。适用于信号调理和放大器电路。

AD977ARS 的 28-pin ssop 封装引脚图

暂无详细引脚数据: AD977ARS.

请参阅 数据手册 以查看完整引脚配置。

典型应用

AD977ARS 适用于 6 应用s: Industrial Process Measurement, Precision Data Acquisition, Audio and Communications Measurement, Embedded Control and Monitoring, Automatic Test Equipment, Power and Energy Monitoring.

🏭

Industrial Process Measurement

The AD977ARS suits industrial process-control systems that monitor pressure, temperature, position, or slow-changing analog signals. Its 16-bit resolution provides 65,536 code levels, while the 100 kSPS throughput rate leaves margin for multiplexed sensor channels and periodic sampling. The single 5 V supply simplifies the power architecture, and the selectable ±5 V or ±3.3 V bipolar ranges can accommodate many conditioned sensor outputs. For reliable measurements, the analog front end should provide low-noise excitation, controlled source impedance, and protection against industrial transients. The converter's 2.5 V internal reference and factory calibration support repeatable conversion results, while correct reference and supply bypassing remain essential in a high-resolution measurement path.

🖥️

Precision Data Acquisition

The AD977ARS is appropriate for laboratory, test, and industrial data-acquisition modules that require 16-bit resolution without the throughput of a very high-speed converter. Its 100 kSPS rate is sufficient for many pressure, level, flow, and position channels sampled repeatedly during a test cycle. The serial interface reduces PCB routing and connector count compared with a parallel-output architecture, while selectable unipolar and bipolar ranges support mixed signal-conditioning systems. Designers should budget acquisition and settling time around each conversion and place analog input and reference connections away from switching nodes. A stable 5 V rail, local bypass capacitors, and a quiet reference arrangement help preserve the benefit of the 16-bit code width.

🌐

Audio and Communications Measurement

The AD977ARS can serve as the conversion element in audio, communications, and signal-analysis equipment operating at moderate sample rates. A 16-bit converter provides substantially greater code resolution than lower-bit devices, which helps represent small signal changes after appropriate gain conditioning. The 100 kSPS throughput is suitable for supervisory, control, or analysis channels rather than full-bandwidth audio capture at conventional high sample rates. The serial output supports compact digital interconnection, and the multiple input ranges provide flexibility between sensor, receiver, and test-point interfaces. Signal-chain design should control gain, bandwidth, ground returns, and switching-induced noise because converter resolution alone cannot recover information lost in the analog front end.

🔧

Embedded Control and Monitoring

The AD977ARS can add high-resolution analog measurement to an embedded controller or monitoring system that needs more dynamic range than an 8-bit or 12-bit converter provides. Its 100 kSPS rate is appropriate for supervisory loops, actuator feedback, battery or power-system monitoring, and periodic sensor acquisition. The single 5 V operation and serial interface help limit board complexity and package footprint. Firmware should account for the converter's conversion cycle, data-valid timing, and configuration of the selected input range. For systems with multiple analog channels, analog multiplexing must preserve settling performance, and the selected reference and input network should avoid excessive temperature drift or parasitic loading.

🔬

Automatic Test Equipment

The AD977ARS is applicable in automatic test equipment that measures slow or medium-bandwidth analog nodes and converts them for comparison or logging. Its 16-bit resolution is beneficial when test limits are tight and measurement uncertainty must be reduced, while the 100 kSPS throughput supports repeated measurements without requiring a flash-speed ADC. The serial interface can connect cleanly to a controller, FPGA, or digital measurement subsystem. Fixture design remains important: connector leakage, relay transients, ground offsets, and long analog traces can degrade accuracy more than the converter itself. Use guarded routing, local reference bypassing, controlled analog grounding, and an input buffer appropriate for the source impedance and acquisition time.

⚡

Power and Energy Monitoring

The AD977ARS can be used in power-monitoring and energy-analysis equipment when higher-resolution feedback improves control-loop behavior or measurement quality. At 100 kSPS, it can capture supervisory, differential, current, or voltage information at a rate suited to many power-conversion and load-management systems. The ±3.3 V and ±5 V bipolar options are useful for conditioned shunt, differential, or sensor signals, while the 5 V single-supply architecture simplifies integration with mixed-signal controllers. Designers should avoid placing the converter directly across high- or fast-changing switching nodes without appropriate attenuation, filtering, isolation, or differential conditioning. Stable reference behavior and careful layout help prevent converter error from obscuring the power signal being measured.

What is the AD977ARS?
The AD977ARS is a 16-bit, 100 kSPS successive-approximation ADC from Analog Devices. According to the manufacturer data sheet, it operates from a single 5 V supply, includes an internal 2.5 V reference, supports selectable unipolar or bipolar input ranges, and uses a serial interface. The AD977ARS is packaged in a 28-pin SSOP and is intended for precision data-acquisition, instrumentation, industrial measurement, and embedded control systems.
What are the key specifications of AD977ARS that engineers should know?
The AD977ARS provides 16-bit resolution, a 100 kSPS throughput rate, one analog input, and a serial data interface. According to Analog Devices, the converter operates from a single 5 V supply, includes a factory-calibrated internal 2.5 V reference, and supports 0 V to 5 V, 0 V to 4 V, ±5 V, and ±3.3 V input configurations. Maximum power dissipation is listed as 100 mW, making it suitable for compact precision measurement systems.
What is the difference between AD977ARS and AD977A?
The AD977ARS is the 100 kSPS member of the AD977 family, while the AD977A provides a 200 kSPS throughput rate. Analog Devices describes both as low-power, 16-bit successive-approximation converters with a single 5 V supply, internal 2.5 V reference, factory calibration, and serial interface. The AD977A is preferable when twice the conversion throughput is required; the AD977ARS fits lower-rate acquisition tasks that do not need that additional speed.
Where can I download the AD977ARS datasheet PDF?
The official AD977/AD977A manufacturer data sheet is available from Analog Devices at https://www.analog.com/media/en/technical-documentation/data-sheets/ad977_977a.pdf. The document covers the AD977ARS and related AD977A variants, including the 16-bit SAR architecture, 5 V single-supply operation, input ranges, reference, serial interface, electrical characteristics, and package information. Use the manufacturer PDF as the primary source when assigning pins and verifying timing or accuracy limits.
Where can I find the AD977ARS pinout?
The AD977ARS pinout is documented in the Analog Devices AD977/AD977A data sheet at https://www.analog.com/media/en/technical-documentation/data-sheets/ad977_977a.pdf. The part uses a 28-pin SSOP package. Consult the package drawing and pin-configuration table in that document before assigning signals, particularly for analog input, reference, power, ground, serial data, clock, and control functions.
Can AD977ARS measure bipolar signals?
Yes, the AD977ARS supports bipolar input configurations of ±5 V and ±3.3 V as well as unipolar ranges of 0 V to 5 V and 0 V to 4 V. Analog Devices specifies these ranges as selectable operating options. The correct front-end design must keep the input within the selected range and satisfy the converter's settling and acquisition requirements before each conversion.
What power supply does AD977ARS require?
The AD977ARS requires a single 5 V supply. Analog Devices describes the converter as a low-power device with maximum power dissipation of 100 mW and includes a power-down mode for systems that need to reduce consumption between active measurement periods. Bypass the supply close to the device and provide clean return paths because reference and supply disturbances can affect a 16-bit conversion result.
Is AD977ARS suitable for industrial data acquisition?
The AD977ARS is suitable for many industrial data-acquisition systems requiring 16-bit resolution, selectable input ranges, and modest conversion throughput. Its 100 kSPS rate accommodates continuous monitoring and control signals, while the 5 V single-supply operation simplifies system power planning. Industrial suitability also depends on the required temperature grade, isolation, safety certification, and long-term availability of the chosen package variant.
When should I choose AD977ARS over AD977A?
Choose the AD977ARS when 100 kSPS is sufficient and the application does not require the AD977A's 200 kSPS throughput. Both families provide 16-bit resolution, a single 5 V supply, an internal 2.5 V reference, factory calibration, and a serial interface. Select the AD977A for faster sampling, waveform capture, or dual-rate acquisition; select the AD977ARS when its lower throughput is adequate and system power or throughput requirements favor the AD977 configuration.
What is the best drop-in replacement for AD977ARS?
No verified same-footprint replacement was established for the AD977ARS, so a drop-in substitute should not be assumed. A valid replacement must use the same 28-pin SSOP footprint, preserve pin-to-pin signal assignments, support the required input range and reference arrangement, and provide adequate conversion performance. Confirm the candidate against the AD977/AD977A data sheet rather than treating a generic 16-bit ADC as a direct replacement.
Can AD977A replace AD977ARS?
The AD977A is not automatically a drop-in replacement for the AD977ARS because it is specified at 200 kSPS rather than 100 kSPS. Compatibility depends on the exact package, pin assignments, interface timing, input configuration, and power behavior. The AD977A may provide a functional upgrade where its faster throughput is acceptable, but the manufacturer data sheet must be used to verify board-level interchangeability.
What can replace AD977ARS?
A suitable replacement for the AD977ARS must be a 16-bit SAR ADC in the same 28-pin SSOP footprint with compatible serial-interface timing and selectable input ranges. No cross-brand drop-in candidate was confirmed by the available manufacturer and product-page information. Treat any proposed substitute as a redesign candidate until its pinout, acquisition time, reference behavior, supply requirements, and absolute accuracy have been compared directly.
Is AD977ARS the same as AD977A?
No, the AD977ARS and AD977A have different throughput ratings. According to Analog Devices, the AD977 operates at 100 kSPS and the AD977A at 200 kSPS, while both are 16-bit, low-power SAR converters using a single 5 V supply and an internal 2.5 V reference. Their shared architecture makes them related family members, but the speed difference must be included in any replacement decision.
Where can I buy AD977ARS online?
Use the Request a Quote form on this page to request AD977ARS pricing, stock confirmation, quantity availability, and lead time for your required package and shipment quantity. The form routes the request without embedding a static price that may become outdated. Include the target quantity, date code requirements, and whether reels, trays, or another authorized packing format are needed.
What is the price and lead time of AD977ARS?
The current AD977ARS commercial terms are handled through the Request a Quote form on this page. Submit the required quantity, desired package, and any date-code or traceability requirements to obtain current price, availability, and lead-time confirmation. Inventory and commercial terms can vary by quantity and packing format, so they should not be inferred from generic market listings.

工程参考数据: AD977ARS ——对比、设计指导和合规信息。

选型指南

Choose the AD977ARS when the acquisition system needs 16-bit resolution, selectable unipolar or bipolar inputs, and up to 100 kSPS throughput from a single 5 V supply. It is well suited to industrial monitoring, instrumentation, test systems, and supervisory control where the AD977A's 200 kSPS rate is unnecessary. The AD977A is the more appropriate related choice when faster acquisition is required, such as broader-band waveform capture or doubled channel throughput. Before selecting a third-party replacement, require the same 28-pin SSOP footprint, identical pin functions, compatible serial timing, equivalent input-range support, and suitable reference and acquisition behavior. Generic 16-bit ADCs may offer comparable resolution but differ in architecture, interface timing, settling requirements, reference arrangement, and package pinout, so they should be treated as redesign candidates rather than automatic drop-ins.

与替代料对比

参数 本产品
Package 28-pin SSOP
Brand Analog Devices
Resolution 16 bit
Throughput Rate 100 kSPS
ADC Architecture Successive-approximation switched-capacitor ADC
Supply Voltage 5 V single supply
Internal Reference 2.5 V
Input Ranges 0 V to 5 V, 0 V to 4 V, ±5 V, and ±3.3 V
Data Interface Serial
Maximum Power Dissipation 100 mW

关键差异点

  • Lower-throughput option within the related AD977 family (对比 AD977A)
  • Flexible input-range configuration (对比 AD977A)
  • Compact serial-interface integration (对比 AD977A)

设计说明

Keep the analog input, reference, and ground paths compact and physically separated from digital clock and serial-data traces. Place the input and reference bypass capacitors close to their associated pins, use a quiet ground reference for the analog return path, and avoid routing high-current or switching signals beneath the converter. These layout practices reduce coupling into the 16-bit conversion and help the 2.5 V reference produce repeatable results.

Decouple the single 5 V supply at the device with capacitors selected according to the manufacturer recommendations and the impedance requirements of the intended sampling system. Verify startup, power-down, and operating current behavior in the final design. Because the AD977ARS is specified for maximum power dissipation of 100 mW, ensure the layout can distribute heat and keep the analog supply free of disturbances from unrelated loads.

Respect acquisition and settling time before initiating each conversion. Source resistance, input capacitance, multiplexer resistance, and protection-network leakage can all contribute to incomplete settling, particularly at 16-bit resolution. Validate the complete analog path rather than testing only the converter, and use a suitable input buffer when the source impedance is too high for the selected sampling network.

Do not confuse the AD977ARS with the faster AD977A when checking timing or preparing a replacement. The AD977ARS is specified at 100 kSPS, whereas the AD977A is specified at 200 kSPS. Also verify the selected unipolar or bipolar input range and the corresponding board configuration. Using incorrect range assumptions or an unsuitable reference connection can create clipping or systematic conversion error even when the serial data appears valid.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

No specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals statement was identified for the AD977ARS. AEC-Q100 is not applicable because this is a precision data-converter IC rather than an automotive-qualified device.

相关搜索

AD977ARS datasheet AD977ARS specifications AD977ARS pinout AD977ARS datasheet pdf AD977ARS 28 pin SSOP Analog Devices AD977ARS AD977ARS 16 bit ADC AD977ARS 100 kSPS AD977ARS input range AD977ARS vs AD977A AD977ARS replacement AD977ARS equivalent AD977ARS price AD977ARS stock AD977ARS industrial data acquisition

相关元器件 & 术语

Analog Devices AD977ARS AD977 AD977A successive-approximation ADC SAR analog-to-digital converter data-converter IC signal-processing semiconductor 16-bit resolution 100 kSPS throughput single 5 V supply 2.5 V internal reference serial interface switched-capacitor ADC 28-pin SSOP SSOP package family surface-mount package unipolar input range bipolar input range factory calibration power-down mode industrial process measurement precision data acquisition
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情