ADF4106SRU-EP-R7 - 6 GHz PLL Synthesizer | Analog Devices
MPN: ADF4106SRU-EP-R7 ✓ AktifADF4106SRU-EP-R7 Genel Bakış
A frequency synthesizer is a clock-and-timing IC that generates a stable, programmable output frequency from a reference oscillator. In the broader hierarchy, the ADF4106 belongs to the PLL family, where a phase-locked loop compares a divided output with a reference signal and drives a charge pump and tuning voltage until the two frequencies align. This architecture makes the device useful for local oscillators in wireless transmitters and receivers.
The principal benefits of the ADF4106-EP are its 6 GHz operating ceiling, 325 MHz maximum input frequency, low-noise phase detector, and precision charge pump. Programmable A and B counters and a dual-modulus prescaler support rational frequency ratios, while the programmable reference divider allows the reference path to be divided before comparison. These features allow a fixed or shared reference source to drive multiple programmable RF output frequencies.
Internally, the synthesizer combines digital frequency detection, a precision charge pump, prescaler, counters, and control registers. The phase-frequency detector compares the divided prescaler output against the divided reference. The resulting charge-pump current adjusts the loop-filter voltage and controls a voltage-controlled oscillator in a closed loop. Designers must select divider ratios and loop-filter components for the desired channel spacing, reference phase noise, lock time, and spur performance.
Typical applications include wireless receiver and transmitter local oscillators, RF up-converters and down-converters, instrumentation, and frequency-generation modules. It is particularly appropriate when the required output approaches the 6 GHz range and the board can accommodate a 16-lead TSSOP footprint with careful high-frequency layout.
Place the charge-pump and loop-filter components close to the device, keep RF and digital return paths compact, and provide continuous ground-plane coverage beneath the TSSOP. The loop filter and reference routing should be evaluated with the intended VCO because phase noise and lock behavior depend on the complete synthesizer, filter, VCO, and reference system rather than on the ADF4106 alone.
This product page combines the ADF4106-EP manufacturer documentation, exact package and frequency information, sourcing details, engineering-oriented application guidance, and a comparison framework for evaluating same-family frequency synthesizers.
Drop-in alternatifler için ADF4106SRU-EP-R7 — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
Bu Serideki Variantlar
Yedek parça uyumlu olan aynı serideki modeller ADF4106SRU-EP-R7 (aynı form faktörü ve ayağa oturma) — farklı olan Package, Charge Pump, A Counter, B Counter, Device Type.
ADF4106SRU-EP
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →ADF4106BRU
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →ADF4107BRU
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →ADF4156BRUZ
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →ADF4106SRU-EP-R7 Özellikler
| Device Type | Integer-N PLL frequency synthesizer |
| Maximum Synthesizer Frequency | 6 GHz |
| Maximum Input Frequency | 325 MHz |
| Minimum Input Frequency | 20 MHz |
| A Counter | 6 bit |
| Prescaler | Dual-modulus P/P+1 |
| Reference Divider | Programmable |
| B Counter | Programmable |
| Phase-Frequency Detector | Low-noise digital type |
| Charge Pump | Precision type |
| Besleme Gerilimi | 2.7 V to 3.3 V |
| İşletim Sıcaklığı | -55°C to 125°C |
| Temperature Grade | Extended-temperature EP grade |
| Paket | 16-TSSOP, 4.40 mm body width |
| Montaj Türü | Surface mount |
| Packaging | Tape and reel |
| Number of Terminals | 16 |
ADF4106SRU-EP-R7 16-tssop, 4.40 mm body width Pin Yapısı Kılavuzu
ADF4106SRU-EP-R7 (16-tssop, 4.40 mm body width paket) için pin yapısı. Pin numaralandırma, işlevleri ve bağlantı şemaları üretici veri kitapçığında tanımlanmıştır. Doğru ayak ve soldurma kılavuzları için onu referans alın.
Ayrıntılı pin çıkış verisi mevcut değil: ADF4106SRU-EP-R7.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
ADF4106SRU-EP-R7 için uygundur 6 uygulamas: Wireless Transmitter Local Oscillator, Wireless Receiver Down-Converter, RF Up-Converter Clock Generation, Test and Measurement Signal Source, Industrial RF Signal Generator, Aerospace and Defense RF Front End.
Wireless Transmitter Local Oscillator
The ADF4106SRU-EP-R7 fits a programmable transmitter local-oscillator block when the required channel remains at or below 6 GHz. Its 6-bit A counter, programmable B counter, programmable reference divider, and dual-modulus prescaler generate the divider ratio used to lock a VCO to the system reference. This allows channel changes to be handled by register programming rather than a separate synthesizer for every band. The -EP grade is appropriate for temperature-challenged equipment when industrial or aerospace thermal requirements justify the extended range from -55°C to 125°C. Loop-filter values, reference phase noise, lock time, and spur performance must still be optimized with the selected VCO and charge-pump settings.
Önerilen
Wireless Receiver Down-Converter
The ADF4106SRU-EP-R7 can generate the programmable local-oscillator signal used by a wireless receiver down-converter. The synthesizer compares a divided VCO output with a divided reference through its low-noise phase-frequency detector and precision charge pump, allowing a 6 GHz-class RF output to remain phase-locked to a shared reference. Dividing the reference close to the required channel spacing can reduce the required VCO tuning range and relax loop-filter requirements. Designers should optimize prescaler, A counter, B counter, and charge-pump settings for acquisition behavior and phase noise while preserving separation between adjacent channels.
Önerilen
RF Up-Converter Clock Generation
In an RF up-converter, the ADF4106SRU-EP-R7 supplies the coherent local-oscillator reference used to translate information from an intermediate frequency toward the transmit band. Its maximum synthesis frequency of 6 GHz makes it relevant to upper-mid-band and microwave transmitter designs, while the 325 MHz input limit constrains the reference frequency presented directly to the device. A programmable reference divider permits a lower-frequency oscillator to be divided before comparison with the divided VCO path. The resulting phase noise and spurious signals depend on the complete loop, so reference selection, loop bandwidth, isolation, and PCB grounding require careful evaluation.
Önerilen
Test and Measurement Signal Source
The ADF4106SRU-EP-R7 can form the programmable synthesis stage of a bench or embedded test-and-measurement source. Register-controlled reference, A, and B division paths allow multiple output frequencies to be generated from a stable reference, while the 6 GHz upper limit covers many RF calibration and instrument test points. The device is most useful when the output is coupled to an external VCO or controlled oscillator stage and the loop is calibrated for phase noise and lock-time requirements. For laboratory-grade accuracy, include an appropriate frequency reference, isolation from loading, calibrated loop filtering, and an output-power conditioning network after the synthesis stage.
Önerilen
Industrial RF Signal Generator
The ADF4106SRU-EP-R7 supports industrial RF signal-generation systems requiring programmable frequencies below 6 GHz and operation across an extended temperature range. Its integer-N architecture is particularly useful when channel spacing permits rational divider ratios and moderate tuning-range requirements. The -EP grade covers -55°C to 125°C, supporting temperature-cycled equipment when the overall assembly also satisfies its thermal requirements. A robust implementation should protect the charge-pump and loop-filter area from vibration and contamination, isolate the reference input from digital return currents, and verify lock performance over the complete industrial temperature range rather than relying on typical room-temperature behavior.
Önerilen
Aerospace and Defense RF Front End
The ADF4106SRU-EP-R7 is suitable for a programmable RF front end when the required local-oscillator frequency is no greater than 6 GHz and the system needs the -EP temperature grade. Its low-noise phase-frequency detector and precision charge pump support the closed-loop control needed in receiver and transmitter frequency plans. Qualification is system-specific: designers should confirm the exact ordering code, package, screening level, radiation requirements, and reliability documentation with Analog Devices. High-frequency layout also needs a continuous reference ground, short charge-pump loops, controlled supply routing, and isolation between sensitive reference and high-power RF sections.
Önerilen
Önerilen Ürünler Özeti
Mühendislik referans verileri: ADF4106SRU-EP-R7 — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün | ADF4106SRU-EP | ADF4106BRU | ADF4107BRU | ADF4156BRUZ |
|---|---|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Package | 16-TSSOP (4.40 mm width) | 16-TSSOP (4.40 mm width) | 16-TSSOP (4.40 mm width) | 16-TSSOP (4.40 mm width) | 16-TSSOP (4.40 mm width) |
| Maximum Synthesis Frequency | 6 GHz | 6 GHz | 6 GHz | 7 GHz | 12 GHz |
| Environmental Ordering Designation | EP grade with R7 suffix | EP grade without R7 suffix | BR ordering designation | BR ordering designation | BRU ordering designation |
Ana Farklılayıcılar
- Extended-temperature EP designation (karşılaştırma:ADF4106BRU)
- Exact 6 GHz ADF4106 synthesis function (karşılaştırma:ADF4107BRU)
- Lower family ceiling for RF design matching (karşılaştırma:ADF4156BRUZ)
- Production-revision-specific ordering code (karşılaştırma:ADF4106SRU-EP)
Tasarım Notları
Keep the charge-pump output, loop-filter components, and synthesizer ground return in the smallest possible loop. Place each capacitor directly across its associated pins and maintain a continuous ground plane under the TSSOP. Route the reference signal away from the VCO and high-current RF paths. Reference and loop-filter stability are as important as trace length because clock noise can multiply through the phase detector and appear as phase noise or spurious signals at the synthesized output.
Decouple the 2.7 V to 3.3 V supply locally with placement guided by the manufacturer application circuit and pin descriptions. Separate the synthesizer's sensitive supply path from noisy RF and switching-converter current returns where the board architecture permits. Verify the supply range at the device pins, not only at the power source, because reference and RF current can otherwise create local supply disturbance that appears as phase noise, jitter, or reduced lock margin.
Do not select a replacement from the maximum-frequency rating alone. ADF4107BRU and ADF4156BRUZ offer higher synthesis ceilings, but their register maps, prescaler options, reference constraints, and loop-filter requirements may differ from ADF4106. For every substitution, verify pin functions, serial-interface behavior, counter widths, charge-pump settings, power sequencing, and the complete VCO loop. A matching 16-TSSOP footprint does not by itself establish functional drop-in compatibility.
Treat the reference input as a sensitive clock signal. Use a short, continuous return path, avoid stubs, and keep the reference source impedance appropriate for the synthesizer's input network. Check phase noise, spur levels, and lock time at the intended reference frequency because those results reflect the divider settings and loop-filter design as well as the ADF4106. Characterize the assembled board with the final VCO, filter, reference, and supply configuration.
Uyumluluk Bilgisi
RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not stated for the exact ordering code. The component is an RF clock-and-timing IC, so AEC-Q100 is not applicable.