Analog Devices

ADF4106SRU-EP-R7 - 6 GHz PLL Synthesizer | Analog Devices

MPN: ADF4106SRU-EP-R7 ✓ فعال
2.7 V to 3.3 V Vdss 16-TSSOP, 4.40 mm body width Package 6 GHz Speed
حداقل سفارش: 1 |

ADF4106SRU-EP-R7 نمای کلی

Analog Devices ADF4106SRU-EP-R7 is a 6 GHz integer-N frequency synthesizer with a programmable reference divider, 6-bit A counter, B counter, dual-modulus prescaler, low-noise phase-frequency detector, and precision charge pump. The device accepts a reference input up to 325 MHz and is packaged in a 16-lead TSSOP with 4.40 mm body width for surface-mount assembly. Its -EP grade supports operation from -55°C to 125°C.

A frequency synthesizer is a clock-and-timing IC that generates a stable, programmable output frequency from a reference oscillator. In the broader hierarchy, the ADF4106 belongs to the PLL family, where a phase-locked loop compares a divided output with a reference signal and drives a charge pump and tuning voltage until the two frequencies align. This architecture makes the device useful for local oscillators in wireless transmitters and receivers.

The principal benefits of the ADF4106-EP are its 6 GHz operating ceiling, 325 MHz maximum input frequency, low-noise phase detector, and precision charge pump. Programmable A and B counters and a dual-modulus prescaler support rational frequency ratios, while the programmable reference divider allows the reference path to be divided before comparison. These features allow a fixed or shared reference source to drive multiple programmable RF output frequencies.

Internally, the synthesizer combines digital frequency detection, a precision charge pump, prescaler, counters, and control registers. The phase-frequency detector compares the divided prescaler output against the divided reference. The resulting charge-pump current adjusts the loop-filter voltage and controls a voltage-controlled oscillator in a closed loop. Designers must select divider ratios and loop-filter components for the desired channel spacing, reference phase noise, lock time, and spur performance.

Typical applications include wireless receiver and transmitter local oscillators, RF up-converters and down-converters, instrumentation, and frequency-generation modules. It is particularly appropriate when the required output approaches the 6 GHz range and the board can accommodate a 16-lead TSSOP footprint with careful high-frequency layout.

Place the charge-pump and loop-filter components close to the device, keep RF and digital return paths compact, and provide continuous ground-plane coverage beneath the TSSOP. The loop filter and reference routing should be evaluated with the intended VCO because phase noise and lock behavior depend on the complete synthesizer, filter, VCO, and reference system rather than on the ADF4106 alone.

This product page combines the ADF4106-EP manufacturer documentation, exact package and frequency information, sourcing details, engineering-oriented application guidance, and a comparison framework for evaluating same-family frequency synthesizers.

جایگزین‌های drop-in برای ADF4106SRU-EP-R7 — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

گونه‌ها در این سری

مدل‌های هم‌سری که جایگزین مستقیم هستند برای ADF4106SRU-EP-R7 (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در Package, Charge Pump, A Counter, B Counter, Device Type.

Analog Devices
Package: 16-pin TSSOP, 0.173 inch / 4.40 mm width
A Counter: 6-bit programmable counter
B Counter: Programmable counter
مقایسه با ADF4106SRU-EP-R7 →
Analog Devices
Package: 16-lead TSSOP
Charge Pump: Precision charge pump
Device Type: Frequency synthesizer IC
مقایسه با ADF4106SRU-EP-R7 →
Analog Devices
Package: 16-lead TSSOP, 0.173 inch width, 4.40 mm width
Charge Pump: Precision charge pump
A Counter: 6-bit programmable
مقایسه با ADF4106SRU-EP-R7 →
Analog Devices
Package: 16-lead TSSOP (0.173", 4.40 mm width)
Charge Pump: Precision, programmable
Device Type: Fractional-N frequency synthesizer (PLL), single circuit
مقایسه با ADF4106SRU-EP-R7 →

ADF4106SRU-EP

✅ جایگزین مستقیم
Analog Devices
📦 16-TSSOP (4.40 mm width)
Frequency synthesizer IC · 6 GHz · 1 · 16-lead TSSOP · 4.40 mm · 20 MHz · 325 MHz · Integer-N and fractional-N frequency synthesis

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

ADF4106BRU

✅ جایگزین مستقیم
Analog Devices
📦 16-TSSOP (4.40 mm width)
Integer-N PLL frequency synthesizer · 6.0 GHz · 20 MHz · 1 · Integer-N · 3.3 V · Separate VP supply · Programmable dual-modulus P/(P+1)

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

ADF4107BRU

✅ جایگزین مستقیم
Analog Devices
📦 16-TSSOP (4.40 mm width)
Integer-N PLL frequency synthesizer · 7 GHz · 1 GHz to 7 GHz · 6-bit programmable · 13-bit programmable · Dual-modulus P/P + 1 · Programmable · Precision charge pump

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

ADF4156BRUZ

✅ جایگزین مستقیم
Analog Devices
📦 16-TSSOP (4.40 mm width)
Fractional-N frequency synthesizer (PLL), single circuit · 6.2 GHz · 500 MHz · 400 V/us minimum · Sigma-Delta · Low noise digital PFD · Precision, programmable · Programmable

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

ADF4106SRU-EP-R7 مشخصات

Device Type Integer-N PLL frequency synthesizer
Maximum Synthesizer Frequency 6 GHz
Maximum Input Frequency 325 MHz
Minimum Input Frequency 20 MHz
A Counter 6 bit
Prescaler Dual-modulus P/P+1
Reference Divider Programmable
B Counter Programmable
Phase-Frequency Detector Low-noise digital type
Charge Pump Precision type
ولتاژ تغذیه 2.7 V to 3.3 V
دمای کاری -55°C to 125°C
Temperature Grade Extended-temperature EP grade
بسته‌بندی 16-TSSOP, 4.40 mm body width
نوع نصب Surface mount
Packaging Tape and reel
Number of Terminals 16

راهنمای پیکربندی پین ADF4106SRU-EP-R7 16-tssop, 4.40 mm body width

پیکربندی پین برای ADF4106SRU-EP-R7 (پکیج 16-tssop, 4.40 mm body width). شماره‌گذاری پایه‌ها، عملکردها و نمودارهای اتصال در دیتاشیت سازنده تعریف شده است. برای footprint دقیق و دستورالعمل‌های لحیم‌کاری به آن مراجعه کنید.

نمودار پین‌آوت پکیج 16-tssop, 4.40 mm body width برای ADF4106SRU-EP-R7

داده پین‌آوت تفصیلی موجود نیست برای ADF4106SRU-EP-R7.

به دیتاشیت برای پیکربندی کامل پین‌ها.

کاربردهای معمول

ADF4106SRU-EP-R7 مناسب است برای 6 کاربردs: Wireless Transmitter Local Oscillator, Wireless Receiver Down-Converter, RF Up-Converter Clock Generation, Test and Measurement Signal Source, Industrial RF Signal Generator, Aerospace and Defense RF Front End.

🌐

Wireless Transmitter Local Oscillator

The ADF4106SRU-EP-R7 fits a programmable transmitter local-oscillator block when the required channel remains at or below 6 GHz. Its 6-bit A counter, programmable B counter, programmable reference divider, and dual-modulus prescaler generate the divider ratio used to lock a VCO to the system reference. This allows channel changes to be handled by register programming rather than a separate synthesizer for every band. The -EP grade is appropriate for temperature-challenged equipment when industrial or aerospace thermal requirements justify the extended range from -55°C to 125°C. Loop-filter values, reference phase noise, lock time, and spur performance must still be optimized with the selected VCO and charge-pump settings.

📡

Wireless Receiver Down-Converter

The ADF4106SRU-EP-R7 can generate the programmable local-oscillator signal used by a wireless receiver down-converter. The synthesizer compares a divided VCO output with a divided reference through its low-noise phase-frequency detector and precision charge pump, allowing a 6 GHz-class RF output to remain phase-locked to a shared reference. Dividing the reference close to the required channel spacing can reduce the required VCO tuning range and relax loop-filter requirements. Designers should optimize prescaler, A counter, B counter, and charge-pump settings for acquisition behavior and phase noise while preserving separation between adjacent channels.

📶

RF Up-Converter Clock Generation

In an RF up-converter, the ADF4106SRU-EP-R7 supplies the coherent local-oscillator reference used to translate information from an intermediate frequency toward the transmit band. Its maximum synthesis frequency of 6 GHz makes it relevant to upper-mid-band and microwave transmitter designs, while the 325 MHz input limit constrains the reference frequency presented directly to the device. A programmable reference divider permits a lower-frequency oscillator to be divided before comparison with the divided VCO path. The resulting phase noise and spurious signals depend on the complete loop, so reference selection, loop bandwidth, isolation, and PCB grounding require careful evaluation.

🖥️

Test and Measurement Signal Source

The ADF4106SRU-EP-R7 can form the programmable synthesis stage of a bench or embedded test-and-measurement source. Register-controlled reference, A, and B division paths allow multiple output frequencies to be generated from a stable reference, while the 6 GHz upper limit covers many RF calibration and instrument test points. The device is most useful when the output is coupled to an external VCO or controlled oscillator stage and the loop is calibrated for phase noise and lock-time requirements. For laboratory-grade accuracy, include an appropriate frequency reference, isolation from loading, calibrated loop filtering, and an output-power conditioning network after the synthesis stage.

🏭

Industrial RF Signal Generator

The ADF4106SRU-EP-R7 supports industrial RF signal-generation systems requiring programmable frequencies below 6 GHz and operation across an extended temperature range. Its integer-N architecture is particularly useful when channel spacing permits rational divider ratios and moderate tuning-range requirements. The -EP grade covers -55°C to 125°C, supporting temperature-cycled equipment when the overall assembly also satisfies its thermal requirements. A robust implementation should protect the charge-pump and loop-filter area from vibration and contamination, isolate the reference input from digital return currents, and verify lock performance over the complete industrial temperature range rather than relying on typical room-temperature behavior.

✈️

Aerospace and Defense RF Front End

The ADF4106SRU-EP-R7 is suitable for a programmable RF front end when the required local-oscillator frequency is no greater than 6 GHz and the system needs the -EP temperature grade. Its low-noise phase-frequency detector and precision charge pump support the closed-loop control needed in receiver and transmitter frequency plans. Qualification is system-specific: designers should confirm the exact ordering code, package, screening level, radiation requirements, and reliability documentation with Analog Devices. High-frequency layout also needs a continuous reference ground, short charge-pump loops, controlled supply routing, and isolation between sensitive reference and high-power RF sections.

What is the ADF4106SRU-EP-R7?
The ADF4106SRU-EP-R7 is an Analog Devices integer-N PLL frequency synthesizer with a maximum synthesizer frequency of 6 GHz and a maximum input frequency of 325 MHz. According to the ADF4106-EP manufacturer datasheet, it combines a low-noise phase-frequency detector, precision charge pump, programmable reference divider, programmable A and B counters, and a dual-modulus prescaler in a 16-lead TSSOP package.
What are the key specifications of ADF4106SRU-EP-R7 that engineers should know?
The ADF4106SRU-EP-R7 supports synthesis up to 6 GHz, accepts an input up to 325 MHz, and operates from a 2.7 V to 3.3 V supply in a 16-TSSOP package. According to the ADF4106-EP manufacturer datasheet, its architecture includes a 6-bit A counter, programmable B counter, programmable reference divider, low-noise digital phase-frequency detector, precision charge pump, and dual-modulus prescaler.
Where can I download the ADF4106SRU-EP-R7 datasheet PDF?
The official ADF4106-EP datasheet PDF is available from Analog Devices at https://www.analog.com/media/en/technical-documentation/data-sheets/ADF4106-EP.pdf. It documents the extended-temperature product, frequency-synthesizer architecture, electrical characteristics, register behavior, pin descriptions, and application information. The linked document is the appropriate source for final schematic, layout, and qualification decisions.
Where can I find the ADF4106SRU-EP-R7 pinout?
The ADF4106SRU-EP-R7 pinout is documented in the Pin Description section and package drawing of the ADF4106-EP manufacturer datasheet. The device uses a 16-lead TSSOP with a 4.40 mm body width. Use the numbered pin table and land pattern in that document when assigning reference, control, charge-pump, and power connections so every PCB track follows the manufacturer's package orientation.
Where to buy ADF4106SRU-EP-R7 online?
Use the Request a Quote form on this page to request ADF4106SRU-EP-R7 availability, order quantity, and shipment options. The requested part is the exact 16-TSSOP, 6 GHz, extended-temperature ordering code. Providing the target quantity and required delivery date in the request allows the order to be reviewed against the correct suffix and reel configuration.
What is the price of ADF4106SRU-EP-R7?
The current unit price for ADF4106SRU-EP-R7 is shown through the Request a Quote form on this page. The form is the appropriate route for an exact-MPN quotation because the order may depend on reel quantity, sourcing conditions, and delivery timing. Submit the required quantity and destination to receive a current price and supporting commercial terms.
What is the lead time and stock status of ADF4106SRU-EP-R7?
Current stock and lead time for ADF4106SRU-EP-R7 should be requested through the Request a Quote form on this page. State the required quantity, reel format, and target delivery date. This avoids treating a generic product-page listing as a confirmed allocation for the exact -EP-R7 ordering code.
ADF4106SRU-EP-R7 vs ADF4106SRU-EP: which is the correct orderable MPN?
ADF4106SRU-EP-R7 is the complete ordering code for the 6 GHz ADF4106 frequency synthesizer in a 16-TSSOP package with the -EP temperature grade and R7 production revision designation. ADF4106SRU-EP identifies the base product ordering code without the R7 suffix. The comparison listings distinguish these strings, so procurement documents should preserve the complete ADF4106SRU-EP-R7 designation.
ADF4106SRU-EP-R7 vs ADF4156BRUZ: which is better for a 6 GHz design?
ADF4106SRU-EP-R7 is the closer choice when the required channel lies at or below 6 GHz and the design is specifically qualified around the ADF4106-EP function set. The ADF4156BRUZ belongs to a different synthesizer family with a higher operating range and is not automatically interchangeable in register implementation or RF performance. According to the manufacturer family documentation, functional replacement requires pin, register, reference, and VCO-loop review.
ADF4106SRU-EP-R7 vs ADF4107BRU: which should I choose?
Choose ADF4106SRU-EP-R7 when the design requires the 6 GHz ADF4106-EP feature set and extended-temperature operation. The ADF4107BRU belongs to the adjacent 7 GHz ADF4107 family, so it may provide a higher synthesis ceiling but does not establish identical register behavior or environmental qualification. Use the manufacturer comparison and pin descriptions to verify that the VCO, counters, reference, and firmware configuration remain compatible.
When should I choose ADF4106SRU-EP-R7 over ADF4106BRU?
Choose ADF4106SRU-EP-R7 for an extended-temperature design requiring the ADF4106-EP grade, specifically -55°C to 125°C operation. ADF4106BRU serves the broader ADF4106 family but does not carry the -EP environmental designation in the compared ordering codes. Both use a 16-TSSOP format, yet package similarity alone does not remove the need to verify temperature grade, lifecycle, and procurement requirements.
Is ADF4106SRU-EP-R7 suitable for wireless receiver and transmitter local oscillators?
The ADF4106SRU-EP-R7 is suitable for programmable wireless local oscillators when the desired output is within its 6 GHz ceiling. According to the ADF4106-EP manufacturer datasheet, the synthesizer is intended for the up-conversion and down-conversion sections of wireless receivers and transmitters. Suitability still depends on VCO range, reference phase noise, loop-filter design, lock-time requirements, and conducted or radiated emissions.
What can replace ADF4106SRU-EP-R7?
ADF4106SRU-EP-R7 can be replaced by ADF4106SRU-EP when the R7 production revision is not required and the base ordering code meets the environmental and procurement requirements. The same-family ADF4106BRU may support a standard-temperature design, while ADF4107BRU and ADF4156BRUZ require additional RF, register, and pin-function review. Treat any replacement as qualified only after checking the manufacturer datasheet and loop behavior.
What is the best cross-brand equivalent for ADF4106SRU-EP-R7?
No cross-brand drop-in equivalent for ADF4106SRU-EP-R7 has been established from the manufacturer documentation and component cross-reference results reviewed for this page. A same-package competitor must still match the 16-TSSOP pin functions, 2.7 V to 3.3 V supply, 6 GHz-class RF performance, reference frequency, counter programming, charge-pump behavior, and the -EP temperature requirement. A footprint match alone is not sufficient for direct substitution.
Is ADF4106SRU-EP-R7 RoHS and REACH compliant?
The RoHS and REACH status of ADF4106SRU-EP-R7 must be taken from the current Analog Devices product and material-compliance declarations for the exact ordering code. Those declarations are not reproduced in the component listing used for this page. For a released medical, industrial, aerospace, or automotive product, request the manufacturer declaration applicable to the production revision and package before assigning compliance in the bill of materials.

داده‌های مرجع مهندسی برای ADF4106SRU-EP-R7 — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose ADF4106SRU-EP-R7 when the RF design requires a 6 GHz-class PLL, a 16-TSSOP footprint, a 2.7 V to 3.3 V supply, and operation across -55°C to 125°C. ADF4106SRU-EP is the closest procurement option when the R7 production-revision designation is not required, while ADF4106BRU may suit a standard-temperature design. Select ADF4107BRU when its higher synthesis ceiling and related device behavior match the RF plan better than the 6 GHz ADF4106. Consider ADF4156BRUZ when the wider 12 GHz family range is justified by the system, recognizing that its registers and loop design may differ. None of these alternatives should be treated as automatically interchangeable: confirm package pin functions, reference limits, counter configuration, serial interface, charge-pump behavior, environmental grade, and the complete VCO loop before releasing a replacement design.

مقایسه با جایگزین‌ها

پارامتر این محصول ADF4106SRU-EP ADF4106BRU ADF4107BRU ADF4156BRUZ
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Package 16-TSSOP (4.40 mm width) 16-TSSOP (4.40 mm width) 16-TSSOP (4.40 mm width) 16-TSSOP (4.40 mm width) 16-TSSOP (4.40 mm width)
Maximum Synthesis Frequency 6 GHz 6 GHz 6 GHz 7 GHz 12 GHz
Environmental Ordering Designation EP grade with R7 suffix EP grade without R7 suffix BR ordering designation BR ordering designation BRU ordering designation

تفاوت‌های کلیدی

  • Extended-temperature EP designation (در مقابلADF4106BRU)
  • Exact 6 GHz ADF4106 synthesis function (در مقابلADF4107BRU)
  • Lower family ceiling for RF design matching (در مقابلADF4156BRUZ)
  • Production-revision-specific ordering code (در مقابلADF4106SRU-EP)

یادداشت‌های طراحی

Keep the charge-pump output, loop-filter components, and synthesizer ground return in the smallest possible loop. Place each capacitor directly across its associated pins and maintain a continuous ground plane under the TSSOP. Route the reference signal away from the VCO and high-current RF paths. Reference and loop-filter stability are as important as trace length because clock noise can multiply through the phase detector and appear as phase noise or spurious signals at the synthesized output.

Decouple the 2.7 V to 3.3 V supply locally with placement guided by the manufacturer application circuit and pin descriptions. Separate the synthesizer's sensitive supply path from noisy RF and switching-converter current returns where the board architecture permits. Verify the supply range at the device pins, not only at the power source, because reference and RF current can otherwise create local supply disturbance that appears as phase noise, jitter, or reduced lock margin.

Do not select a replacement from the maximum-frequency rating alone. ADF4107BRU and ADF4156BRUZ offer higher synthesis ceilings, but their register maps, prescaler options, reference constraints, and loop-filter requirements may differ from ADF4106. For every substitution, verify pin functions, serial-interface behavior, counter widths, charge-pump settings, power sequencing, and the complete VCO loop. A matching 16-TSSOP footprint does not by itself establish functional drop-in compatibility.

Treat the reference input as a sensitive clock signal. Use a short, continuous return path, avoid stubs, and keep the reference source impedance appropriate for the synthesizer's input network. Check phase noise, spur levels, and lock time at the intended reference frequency because those results reflect the divider settings and loop-filter design as well as the ADF4106. Characterize the assembled board with the final VCO, filter, reference, and supply configuration.

اطلاعات انطباق

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not stated for the exact ordering code. The component is an RF clock-and-timing IC, so AEC-Q100 is not applicable.

تاریخ تأیید داده‌ها: 2026-11-20 — داده‌ها توسط تیم مهندسی قطعات XAIPART تأیید و گردآوری شده است

جستجوهای مرتبط

ADF4106SRU-EP-R7 ADF4106SRU-EP-R7 datasheet ADF4106SRU-EP-R7 datasheet pdf ADF4106SRU-EP-R7 pinout ADF4106SRU-EP-R7 equivalent ADF4106SRU-EP-R7 replacement ADF4106SRU-EP-R7 cross reference ADF4106SRU-EP-R7 vs ADF4107BRU ADF4106SRU-EP-R7 vs ADF4156BRUZ ADF4106SRU-EP-R7 footprint ADF4106SRU-EP-R7 application circuit Analog Devices ADF4106SRU-EP-R7 ADF4106SRU-EP-R7 price ADF4106SRU-EP-R7 stock

قطعات و اصطلاحات مرتبط

Analog Devices ADF4106SRU-EP-R7 ADF4106SRU-EP ADF4106BRU ADF4107BRU ADF4156BRUZ frequency synthesizer phase-locked loop PLL integer-N synthesizer clock and timing IC phase-frequency detector precision charge pump dual-modulus prescaler programmable reference divider 6-bit A counter programmable B counter RF local oscillator wireless transmitter wireless receiver up-converter down-converter 16-TSSOP TSSOP package family surface-mount package loop filter voltage-controlled oscillator phase noise reference input extended-temperature EP grade
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ