Analog Devices

ADF4360-8BCPZRL - 400 MHz Integer-N VCO Synthesizer | ADI

MPN: ADF4360-8BCPZRL ✓ Aktif
3.0 V to 3.6 V Vdss 24-lead LFCSP with exposed pad Package 65 MHz to 400 MHz Speed
MOQ: 1 |

ADF4360-8BCPZRL Genel Bakış

The Analog Devices ADF4360-8BCPZRL is an integrated integer-N frequency synthesizer and voltage-controlled oscillator that generates RF signals from 65 MHz to 400 MHz, operates from a 3.0 V to 3.6 V supply, and is packaged in a 24-lead LFCSP with an exposed pad.

An integer-N frequency synthesizer is a PLL-based timing and RF signal-generation device. Its phase-locked loop compares a divided reference signal with a feedback signal derived from the output, then drives the VCO until the two match. The ADF4360-8 places the synthesizer, VCO, and associated control logic in one package, while external inductors establish the center frequency and allow operation across the 65 MHz to 400 MHz range.

The device is programmed through a simple 3-wire serial interface. Integrated registers control the frequency plan, VCO settings, charge-pump current, and power state, allowing software or firmware to change operating conditions without external frequency-setting components. Its 3.0 V to 3.6 V single-supply operation also simplifies connection to low-voltage RF, clocking, and communications systems.

The external-inductor architecture creates an important design distinction: the synthesizer is not limited to one fixed output frequency. Designers select inductors according to the desired VCO range and then configure the integer-N divider and reference path through the register interface. Correct inductor selection and loop-filter design are central to achieving accurate tuning, acceptable phase noise, and reliable lock behavior.

Typical uses include local oscillators for receivers and transmitters, clock-generation circuits, frequency-hopping systems, and RF test equipment. The 400 MHz upper range also makes the device suitable for industrial wireless links, instrumentation, and intermediate-frequency generation where a programmable synthesizer provides more flexibility than a fixed-frequency oscillator.

When laying out the PCB, use the manufacturer’s pin-description table and reference-layout guidance, connect the exposed pad to the ground plane, and place decoupling and loop-filter components close to their assigned pins. Verify lock, reference stability, spur performance, and VCO tuning range on the assembled board because component tolerance, layout parasitics, and power-supply noise affect final RF performance.

Drop-in alternatifler için ADF4360-8BCPZRL — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

Bu Serideki Variantlar

Yedek parça uyumlu olan aynı serideki modeller ADF4360-8BCPZRL (aynı form faktörü ve ayağa oturma) — farklı olan Device Type, Maximum RF Output Frequency, Package, Package Type, Serial Interface.

Analog Devices
Device Type: Integer-N frequency synthesizer with integrated VCO
Maximum RF Output Frequency: 1.25 GHz
Package Type: 24-lead LFCSP with exposed pad
İle Karşılaştır ADF4360-8BCPZRL →
Analog Devices
Device Type: Integrated integer-N frequency synthesizer and VCO
Package: 24-lead LFCSP-24, 4 x 4 mm, exposed pad
Serial Interface: 3-wire serial interface
İle Karşılaştır ADF4360-8BCPZRL →

ADF4360-8BCPZRL7

✅ Yerleştirme
📦 24-LFCSP exposed pad
Same 65 MHz to 400 MHz architecture and 24-lead exposed-pad package; orderable packing or marking suffix differs by 0% in the principal frequency and supply ratings

📋 Katalogda Olmayan Referans Alternatifi

ADF4360-8BCPZ

✅ Yerleştirme
📦 24-LFCSP exposed pad
Same 65 MHz to 400 MHz frequency range and 24-lead exposed-pad package; orderable packing or marking suffix differs with 0% change in the principal frequency and supply ratings

📋 Katalogda Olmayan Referans Alternatifi

ADF4360-8BCPRL

✅ Yerleştirme
Analog Devices
📦 24-LFCSP exposed pad
Integrated integer-N frequency synthesizer and VCO · 65 MHz to 400 MHz · 400 MHz · 65 MHz · 3 V to 3.6 V · 3.6 V · 1.8 V compatible · Integer-N

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

ADF4360-8BCPZRL Özellikler

Device Type Integer-N frequency synthesizer and VCO
Frequency Range 65 MHz to 400 MHz
Maximum RF Output Frequency 400 MHz
Supply Voltage Range 3.0 V to 3.6 V
Serial Interface 3-wire
VCO Frequency Setting Set by external inductors
Power-Down Function Supported
Paket 24-lead LFCSP with exposed pad
Package Type 24-WFQFN exposed-pad CSP
Montaj Türü Surface mount
İşletim Sıcaklığı Aralığı -40°C to +85°C
Moisture Sensitivity Level MSL 3 (168 hours)
RoHS Durumu RoHS3 compliant
REACH Status Unaffected

ADF4360-8BCPZRL 24-wfqfn exposed-pad csp Pin Yapısı Kılavuzu

ADF4360-8BCPZRL (24-wfqfn exposed-pad csp paket) için pin yapısı. Pin numaralandırma, işlevleri ve bağlantı şemaları üretici veri kitapçığında tanımlanmıştır. Doğru ayak ve soldurma kılavuzları için onu referans alın.

24-wfqfn exposed-pad csp paket pin çizelgesi için ADF4360-8BCPZRL

Ayrıntılı pin çıkış verisi mevcut değil: ADF4360-8BCPZRL.

Aşağıdaki veri sayfası tam pin konfigürasyonu için.

Tipik Uygulamalar

ADF4360-8BCPZRL için uygundur 6 uygulamas: Programmable RF Local Oscillator, RF Clock Generation, Frequency-Hopping Communications, Industrial Wireless Test Equipment, Instrumentation and Measurement, RF Frequency Multiplication.

🌐

Programmable RF Local Oscillator

The ADF4360-8BCPZRL is appropriate for a programmable receiver or transmitter local oscillator because it combines an integer-N PLL with a VCO covering 65 MHz to 400 MHz. External inductors set the VCO band, and the 3-wire interface changes the operating configuration through the internal registers. The 3.0 V to 3.6 V supply also suits compact RF subsystems. During design, select inductors for the intended band, apply the manufacturer’s loop-filter approach, and verify both lock range and phase-noise performance across temperature.

🖥️

RF Clock Generation

The ADF4360-8BCPZRL can generate a programmable clock from 65 MHz to 400 MHz for RF sampling, conversion, and modulation systems. Its integrated synthesizer and VCO reduce the number of separate frequency-generation blocks, while the 3-wire serial interface allows firmware to update the frequency plan. The design must account for reference jitter, integer-N division spurs, and loop-filter settings. Validate the output stability and unwanted-signal levels at the system clock rather than relying only on nominal frequency accuracy.

📡

Frequency-Hopping Communications

A frequency-hopping radio can use the ADF4360-8BCPZRL to change operating conditions without replacing the oscillator hardware. Register programming through the 3-wire interface supports automated frequency-plan changes, while the 65 MHz to 400 MHz range covers multiple short-range and industrial RF bands. Hop timing, reference accuracy, and lock settling must be coordinated in firmware. Also inspect the spectrum during each hop to ensure that synthesizer spurs do not interfere with adjacent channels.

🏭

Industrial Wireless Test Equipment

The ADF4360-8BCPZRL supports compact RF signal sources used in industrial wireless test equipment because it covers 65 MHz to 400 MHz from a 3.0 V to 3.6 V supply. A test instrument can program different tones or intermediate frequencies through the serial register interface and use external inductors to optimize the selected band. Stable references and careful exposed-pad grounding are important for repeatable measurements. Confirm phase noise, tuning accuracy, and output level after assembly.

📺

Instrumentation and Measurement

The ADF4360-8BCPZRL is useful as a programmable source for instrumentation that requires accurate test tones within the 65 MHz to 400 MHz range. Integrating the PLL and VCO into one device simplifies the RF architecture, while register control permits remote or automated adjustment of the output configuration. The reference oscillator and loop-filter components directly influence frequency accuracy and phase noise, so they should follow the manufacturer’s design guidance. Use shielded RF routing and controlled impedance for dependable measurement results.

⚡

RF Frequency Multiplication

The integer-N architecture allows the ADF4360-8BCPZRL to create an output frequency derived from a lower reference through programmable division and multiplication. This is useful when a system has a stable reference but needs a local RF carrier in the 65 MHz to 400 MHz band. The reference-to-output ratio determines both the available channel spacing and phase-noise translation. Design the divider ratios to avoid unwanted spurs, and confirm that every required output frequency has adequate lock margin across operating temperature.

Önerilen Ürünler Özeti

ADF4360-8BCPZ Same-family frequency synthesizer in the 24-lead exposed-pad package Kullanıldığı Yer: Programmable RF Local Oscillator, Frequency-Hopping Communications, RF Frequency Multiplication ADF4360-8BCPRL Analog Devices Kullanıldığı Yer: Programmable RF Local Oscillator, Industrial Wireless Test Equipment ADF4360-8BCPZRL7 Same-configuration Analog Devices ordering alternative Kullanıldığı Yer: RF Clock Generation, Instrumentation and Measurement
What is the ADF4360-8BCPZRL?
The ADF4360-8BCPZRL is an integrated integer-N frequency synthesizer and voltage-controlled oscillator from Analog Devices. It generates RF output from 65 MHz to 400 MHz, uses external inductors to set the VCO center frequency, and is controlled through a 3-wire serial interface. The device operates from 3.0 V to 3.6 V and includes a power-down capability, making it suitable for programmable RF and clock-generation systems.
What frequency range does the ADF4360-8BCPZRL cover?
The ADF4360-8BCPZRL covers an RF frequency range of 65 MHz to 400 MHz according to the Analog Devices product page. The center frequency is established with external inductors, while the integer-N divider and VCO settings are configured through the internal register interface. Actual programmable output positions also depend on the reference frequency, divider ratios, and inductor selection used in the final design.
What supply voltage does the ADF4360-8BCPZRL require?
The ADF4360-8BCPZRL operates from a single supply of 3.0 V to 3.6 V. The Analog Devices product page identifies this operating range, while the power-down function allows the device to be disabled when it is not needed. Decoupling and supply sequencing should follow the layout and application guidance in the manufacturer datasheet.
How is the ADF4360-8BCPZRL programmed?
The ADF4360-8BCPZRL is programmed through its simple 3-wire serial interface, which controls the on-chip registers. These registers configure synthesis and VCO operating parameters such as the frequency plan and power state. Refer to the manufacturer’s register map and write-sequence instructions when designing firmware so that required data is transferred in the correct order.
What are the key specifications of ADF4360-8BCPZRL that engineers should know?
The principal specifications of the ADF4360-8BCPZRL are a 65 MHz to 400 MHz operating range, 3.0 V to 3.6 V single-supply operation, a 3-wire control interface, external-inductor VCO frequency setting, and a 24-lead LFCSP package with an exposed pad. The Analog Devices product page also confirms an integrated integer-N synthesizer and VCO with a power-down function.
Where can I download the ADF4360-8BCPZRL datasheet PDF?
The manufacturer datasheet is available through the Analog Devices ADF4360-8 product page at https://www.analog.com/en/products/adf4360-8.html. Use the datasheet’s pin-description table, register map, recommended application circuit, and layout guidance before assigning PCB tracks. The product page also links to the EV-ADF4360-8EB1Z evaluation board for laboratory evaluation.
Where can I find the ADF4360-8BCPZRL pinout?
The ADF4360-8BCPZRL uses a 24-lead LFCSP with an exposed pad, and its exact numbered signal assignments are shown in the Analog Devices datasheet. Use the pin-description table when assigning nets and confirm the exposed-pad connection in the manufacturer layout instructions. Do not infer the pinout from package dimensions or from a different ADF4360 frequency-band variant.
What can replace the ADF4360-8BCPZRL?
The closest same-configuration choices are the ADF4360-8BCPZRL7, ADF4360-8BCPZ, and ADF4360-8BCPRL entries from the same Analog Devices family. They share the 65 MHz to 400 MHz synthesizer architecture and 24-lead exposed-pad package, but their orderable suffixes identify different packing or marking arrangements. Verify the required suffix, reel orientation, and tape-and-reel configuration before substituting one for the other.
Is the ADF4360-8BCPZRL the same as the ADF4360-8BCPZ?
The ADF4360-8BCPZRL and ADF4360-8BCPZ implement the same ADF4360-8 65 MHz to 400 MHz integer-N synthesizer and VCO in the same 24-lead exposed-pad package. Their orderable suffixes distinguish commercial packing or marking configurations. They are therefore electrically close alternatives, although procurement and assembly teams should confirm the exact suffix, packing format, and manufacturer ordering code.
When should I choose the ADF4360-8BCPZRL over another frequency synthesizer?
Choose the ADF4360-8BCPZRL when a design requires a programmable 65 MHz to 400 MHz RF source controlled by a low-voltage 3-wire interface. It is particularly suitable when external inductors can be selected to match the desired band and when integration of the PLL and VCO simplifies the RF chain. A fixed-frequency oscillator is simpler for a single unchanging tone, while a different synthesizer band is required when the target output exceeds 400 MHz.
Is the ADF4360-8BCPZRL suitable for RF clock generation?
Yes, the ADF4360-8BCPZRL is suitable for programmable RF and clock-generation applications within 65 MHz to 400 MHz. Its integrated integer-N synthesizer and VCO, 3-wire register interface, and 3.0 V to 3.6 V operation support compact frequency-programmable designs. Use the manufacturer’s loop-filter and layout recommendations, and verify phase noise and spur performance in the target board implementation.
What is the best Analog Devices equivalent for the ADF4360-8BCPZRL?
The closest Analog Devices alternatives are the ADF4360-8BCPZRL7, ADF4360-8BCPZ, and ADF4360-8BCPRL because they share the ADF4360-8 function and package configuration. Selection should be based on the exact ordering suffix, packing requirements, and component availability rather than on a different ADF4360 frequency-band member. Confirm the pinout and programming sequence against the manufacturer datasheet before approving a substitution.
Where can I buy the ADF4360-8BCPZRL online?
The ADF4360-8BCPZRL can be requested through the “Request a Quote” form on this page. Include the exact suffix, required quantity, target reel or packing format, and delivery location in the request. Current commercial terms should be confirmed through that form because list-page pricing and availability can change independently of the technical specification.
What is the price of the ADF4360-8BCPZRL?
Use the “Request a Quote” form on this page for current pricing of the ADF4360-8BCPZRL. Submit the required quantity, packing format, and ship-to location so the quotation reflects the appropriate order configuration. The structured pricing data on this page is refreshed for the exact manufacturer part number and is the preferred source for commercial terms.
What is the lead time for the ADF4360-8BCPZRL?
Request the current lead time through the “Request a Quote” form on this page and state the required quantity and packaging format. Lead time can vary with order volume, manufacturing schedules, and the selected orderable suffix. Requesting a written quotation also allows current availability, delivery scheduling, and shipment terms to be confirmed for your specific procurement requirement.
Is the ADF4360-8BCPZRL in stock?
Current stock status should be confirmed through the “Request a Quote” form on this page. Provide the exact MPN ADF4360-8BCPZRL, required quantity, and preferred packing format so inventory and delivery can be matched to your production plan. Because component availability changes quickly, treat the quote response as the current commitment rather than relying on a static product-page status.

Mühendislik referans verileri: ADF4360-8BCPZRL — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Choose the ADF4360-8BCPZRL when the design requires a programmable 65 MHz to 400 MHz RF source with an integrated integer-N PLL and VCO, a 3-wire control interface, and operation from 3.0 V to 3.6 V. It is a strong fit for receivers, transmitters, clock generation, frequency hopping, and RF test equipment when the target band can be supported by external inductors. Use a fixed-frequency oscillator when only one unchanging tone is needed, or a different frequency-band synthesizer when the required output exceeds 400 MHz. Among the listed same-family alternatives, the principal technical ratings are equivalent, so choose based on the exact orderable suffix, packing format, marking requirements, and component availability. A substitution should still be checked against the manufacturer’s pin table and register programming sequence.

Alternatiflerle Karşılaştırma

Parametre Bu Ürün ADF4360-8BCPZRL7 ADF4360-8BCPZ ADF4360-8BCPRL
Brand Analog Devices Analog Devices Analog Devices Analog Devices
Package 24-lead LFCSP with exposed pad 24-lead LFCSP with exposed pad 24-lead LFCSP with exposed pad 24-lead LFCSP with exposed pad
Device Type Integer-N synthesizer and VCO Integer-N synthesizer and VCO Integer-N synthesizer and VCO Integer-N synthesizer and VCO
Frequency Range 65 MHz to 400 MHz 65 MHz to 400 MHz 65 MHz to 400 MHz 65 MHz to 400 MHz
Maximum RF Output Frequency 400 MHz 400 MHz 400 MHz 400 MHz
Supply Voltage Range 3.0 V to 3.6 V 3.0 V to 3.6 V 3.0 V to 3.6 V 3.0 V to 3.6 V
Control Interface 3-wire serial interface 3-wire serial interface 3-wire serial interface 3-wire serial interface
VCO Frequency Setting External inductors External inductors External inductors External inductors
Power-Down Function Supported Supported Supported Supported

Ana Farklılayıcılar

  • Integrated integer-N PLL and VCO for the 65 MHz to 400 MHz band (karşılaştırma:ADF4360-8BCPZ)
  • Single-chip RF synthesis with external inductor configuration (karşılaştırma:ADF4360-8BCPRL)
  • Programmable low-voltage operation (karşılaştırma:ADF4360-8BCPZRL7)

Tasarım Notları

Follow the Analog Devices reference layout for the 24-lead LFCSP, connect the exposed pad to the ground plane, and place bypass capacitors close to the supply pins. Keep the VCO tank inductors and their connection paths short because stray inductance can shift the tank frequency and reduce tuning margin. Maintain controlled impedance on RF outputs and avoid routing high-speed digital control signals directly beneath sensitive analog and VCO nodes.

Decouple the 3.0 V to 3.6 V supply so that switching currents from surrounding circuitry do not modulate the VCO control voltage or disrupt phase locking. Place the local capacitors at the package rather than at the supply-source connector, and verify power-down behavior in firmware. The external reference path also requires a clean, low-jitter source if frequency accuracy and phase noise are important.

Do not select an ADF4360 family member solely by the 24-lead package. The ADF4360-8 targets 65 MHz to 400 MHz, while other members cover different frequency bands and can require different tank inductors. Confirm the exact band, external-inductor values, reference frequency, divider range, and register settings from the manufacturer application information before releasing a PCB or production order.

Characterize both desired outputs and unwanted products at the antenna or receiver front end. Integer-N division can create reference-related spurs, and switching power converters can inject noise into the VCO. Use a filtered supply or separate sensitive analog supply region, provide adequate reference isolation, and measure settling time and lock performance over temperature before relying on rapid frequency-hopping operation.

Uyumluluk Bilgisi

RoHS
Compliant
REACH
Compliant
AEC-Q100
Not Applicable
Kadmiyumdan Arınmış
Unknown
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

RoHS3 compliant and REACH unaffected according to the component compliance listing. No automotive AEC-Q100 qualification, lead-free statement, halogen-free statement, or conflict-minerals declaration is established for this exact orderable configuration.

İlgili Aramalar

ADF4360-8BCPZRL ADF4360-8BCPZRL datasheet ADF4360-8BCPZRL datasheet pdf ADF4360-8BCPZRL pinout ADF4360 1bcpz ADF4360 7bcpz ADF4360 7bcpzrl7 ADF4360-8BCPZRL equivalent ADF4360-8BCPZRL replacement ADF4360-8BCPZRL vs ADF4360-8BCPZ Analog Devices ADF4360-8BCPZRL ADF4360-8BCPZRL 400 MHz synthesizer ADF4360-8BCPZRL RF clock ADF4360-8BCPZRL price ADF4360-8BCPZRL stock

İlgili Bileşenler ve Terimler

Analog Devices ADF4360-8BCPZRL ADF4360-8BCPZRL7 ADF4360-8BCPZ ADF4360-8BCPRL ADF4360-8 integer-N frequency synthesizer voltage-controlled oscillator VCO phase-locked loop PLL RF synthesizer programmable oscillator frequency synthesizer clock generator local oscillator frequency hopping 3-wire serial interface 65 MHz to 400 MHz 3.0 V to 3.6 V external inductor 24-lead LFCSP exposed pad RoHS3 REACH
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle