Analog Devices

ADM232AANZ - 200 kB/s Dual RS-232 Transceiver | Analog Devices

MPN: ADM232AANZ ✓ Aktif
5 V Vdss 16-lead DIP, 0.300 inch (7.62 mm) pitch Package
MOQ: 1 |

ADM232AANZ Genel Bakış

The Analog Devices ADM232AANZ is a dual RS-232 line-driver and receiver transceiver rated for data rates up to 200 kB/s. It operates from a single 5 V supply and uses an on-board DC-DC converter with 0.1 µF charge-pump capacitors to produce the bipolar voltage swings required by RS-232 links. The device is packaged in a 16-lead DIP.

An RS-232 transceiver is an interface integrated circuit that translates logic-level signals into RS-232 bipolar levels and converts received bipolar signals back into digital logic levels. It belongs to the interface IC hierarchy, where transceivers connect a host, controller, or test instrument to a serial communications port. The ADM232A combines two drivers and two receivers, allowing one package to support two bidirectional serial channels or one full-duplex channel plus additional receive or drive capability.

The ADM232AANZ provides a 200 kB/s transmission rate, single 5 V operation, two drivers, two receivers, and an on-board DC-DC converter. According to the manufacturer product information, the charge-pump design uses only 0.1 µF external capacitors, reducing the external component count required for RS-232 level conversion. The interface is designed to meet EIA-232-E and V.28 specifications, making it suitable for equipment using established RS-232 electrical requirements.

The integrated charge pump creates the positive and negative voltages needed by an RS-232 receiver even though the device itself is powered from only 5 V. This arrangement eliminates the need for a separate bipolar supply at the interface. The two-driver, two-receiver organization also allows designers to combine transmit and receive functions in a standard 16-lead through-hole footprint rather than using separate driver and receiver packages.

Typical applications include industrial serial-port adapters, instrumentation, point-of-sale equipment, test and measurement systems, embedded control equipment, and legacy peripheral connections. The 200 kB/s rate is useful when the linked equipment requires more speed than a basic asynchronous serial interface provides. Because RS-232 is a point-to-point standard, the interface should be placed at the physical end of a cable run and connected to a compatible host or peripheral.

For a new design, verify the complete transceiver pin assignment, charge-pump capacitor values, and supply requirements in the Analog Devices ADM232A datasheet before laying out the PCB. If the target board instead uses a surface-mount footprint, changing to ADM232AANZ requires a package redesign because the AANZ ordering code denotes a 16-lead DIP rather than a surface-mount option.

This page combines the ADM232AANZ interface capabilities, package constraints, replacement guidance, and practical design considerations in one engineering-oriented reference. It also identifies where a same-footprint replacement can be evaluated and where a PCB migration is unavoidable.

Drop-in alternatifler için ADM232AANZ — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

Bu Serideki Variantlar

Yedek parça uyumlu olan aynı serideki modeller ADM232AANZ (aynı form faktörü ve ayağa oturma) — farklı olan Package, Supply Voltage, Charge Pump Capacitors, Data Rate, Mounting Type.

Analog Devices
Package: 18-SOIC W
Charge Pump Capacitors: 0.1 µF
Data Rate: 200 kbps
İle Karşılaştır ADM232AANZ →
Linear Technology
Package: 18-pin CERDIP (J) - through-hole
Supply Voltage: 5 V (single supply)
Charge Pump Capacitors: 4 x 1 µF (external)
İle Karşılaştır ADM232AANZ →
Maxim Integrated
Package: 16-pin PDIP (PE)
Supply Voltage: 4.5 V to 5.5 V (single 5 V supply)
Charge Pump Capacitors: 4 x 1 µF external
İle Karşılaştır ADM232AANZ →

MAX232CPE

✅ Yerleştirme
Maxim Integrated
📦 16-lead DIP
RS-232 Transceiver (2 Drivers / 2 Receivers) · EIA/TIA-232E, V.28/V.24 · 4.5 V to 5.5 V (single 5 V supply) · 120 kbps · 2 · 2 · ±9 V typical (RS-232 load) · ±25 V

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

ST3232CN

✅ Yerleştirme
📦 16-lead DIP
Same dual-driver, dual-receiver RS-232 function in a 16-lead DIP package; shutdown capability and exact pin mapping require verification

📋 Katalogda Olmayan Referans Alternatifi

LTC232CN

✅ Yerleştirme
📦 16-lead DIP
Same dual RS-232 transceiver category and 16-lead DIP footprint; no verified ADM232AANZ-to-LTC232CN speed difference is stated

📋 Katalogda Olmayan Referans Alternatifi

ADM232AANZ Özellikler

Product Type Dual RS-232 line driver and receiver transceiver
Maximum Transmission Rate 200 kB/s
Besleme Gerilimi 5 V
Number of Drivers 2
Number of Receivers 2
Charge-Pump Capacitor Value 0.1 µF
On-Board DC-DC Converter Present
RS-232 Output Swing Approximately ±9 V with a 5 V supply
Receiver Input Levels Up to ±30 V
Interface Compliance EIA-232-E and V.28
Paket 16-lead DIP, 0.300 inch (7.62 mm) pitch
Montaj Türü Through-hole

ADM232AANZ 16-lead dip, 0.300 inch (7.62 mm) pitch Pin Yapısı Kılavuzu

ADM232AANZ (16-lead dip, 0.300 inch (7.62 mm) pitch paket) için pin yapısı. Pin numaralandırma, işlevleri ve bağlantı şemaları üretici veri kitapçığında tanımlanmıştır. Doğru ayak ve soldurma kılavuzları için onu referans alın.

16-lead dip, 0.300 inch (7.62 mm) pitch paket pin çizelgesi için ADM232AANZ

Ayrıntılı pin çıkış verisi mevcut değil: ADM232AANZ.

Aşağıdaki veri sayfası tam pin konfigürasyonu için.

Tipik Uygulamalar

ADM232AANZ için uygundur 6 uygulamas: Industrial Serial-Port Interface, Test and Measurement Equipment, Point-of-Sale Terminal Interface, Legacy Peripheral Connection, Embedded Control Communication, Instrumentation and Signal-Control Link.

🏭

Industrial Serial-Port Interface

The ADM232AANZ fits industrial controllers, adapters, and data-acquisition equipment that uses point-to-point RS-232 communication. Its 200 kB/s maximum transmission rate accommodates legacy asynchronous links that require more throughput than a low-speed serial transceiver provides. The device combines two drivers and two receivers, allowing one 16-lead DIP package to serve two communications paths or a combination of full-duplex and unidirectional links. Because it runs from one 5 V supply, industrial equipment can simplify its power architecture while retaining the positive and negative signal levels required by RS-232. The 16-lead through-hole package also eases assembly and repair on control boards that use conventional DIP sockets.

🔧

Test and Measurement Equipment

The ADM232AANZ is appropriate for programmable instruments, laboratory controllers, and legacy test fixtures that communicate through an RS-232 command port. The 200 kB/s rate provides a useful balance between interface speed and compatibility with conventional UART transceivers, while the two transmitters and two receivers can support separate control and status paths. Its single 5 V supply reduces the number of rails required near a sensitive analog or digital instrument. For measurement equipment, place the transceiver close to the external connector and maintain a low-impedance ground connection between the circuit board and cable shield to reduce ground-potential errors. Follow the Analog Devices charge-pump and capacitor layout for stable operation.

🖥️

Point-of-Sale Terminal Interface

The ADM232AANZ can support a point-of-sale terminal, receipt printer, scanner interface, or payment peripheral that retains an RS-232 port. Two drivers and two receivers provide flexibility for a full-duplex link or multiple one-way connections, while the 200 kB/s capability is suitable for command traffic and burst data. Operating from a single 5 V supply is convenient in point-of-sale equipment where internal rails are limited. The through-hole DIP package may suit larger controller boards with sockets or wave-solder assembly. Designers should confirm whether the peripheral expects standard RS-232 voltage levels, ground continuity, and a particular connector wiring arrangement before finalizing the interface circuit.

🔧

Legacy Peripheral Connection

The ADM232AANZ is useful when bringing a modern controller into an older peripheral ecosystem built around RS-232. Its 200 kB/s transmission rate supports the serial data rates commonly used by legacy equipment, while the integrated DC-DC converter generates bipolar levels from one 5 V rail. This allows a controller board to retain a conventional RS-232 connector without requiring a separate negative power supply. The 16-lead DIP package is especially attractive as a replacement for an existing through-hole interface footprint. Confirm pin compatibility, capacitor values, logic polarity, and connector pin numbering against the original schematic before treating the device as a direct replacement.

🧩

Embedded Control Communication

The ADM232AANZ can connect an embedded controller or service processor to equipment using a conventional RS-232 port. The 200 kB/s ceiling gives the UART system ample margin for command, diagnostic, and configuration traffic, while two drivers and two receivers allow more flexible channel allocation. A single 5 V supply simplifies connections to embedded logic rails, and the on-board DC-DC converter supplies the required bipolar line levels internally. In embedded products, account for the fact that RS-232 is intended for point-to-point links, maintain a common ground path with the remote equipment, and place protection components near the external connector. The DIP package can also facilitate prototype revisions where the interface footprint has not yet been committed to a surface-mount design.

📺

Instrumentation and Signal-Control Link

The ADM232AANZ can serve as the command and status interface between an instrumentation product and a host computer. Its 200 kB/s rate supports frequent parameter updates and diagnostic exchanges, while its integrated charge pump provides the required RS-232 voltage swings from a single 5 V supply. Using two receivers can simplify monitoring of multiple status signals, and two drivers can support separate command or control outputs. Keep the interface converter electrically close to the connector, route the cable ground with the signal conductors, and observe the datasheet's charge-pump capacitor placement. Although the converter is intended for data and control signaling rather than high-bandwidth analog transmission, it is appropriate for supervisory channels that sit alongside precision measurement circuitry.

What is the ADM232AANZ?
The ADM232AANZ is a dual RS-232 transceiver from Analog Devices, combining two line drivers and two receivers in a 16-lead DIP package. It supports transmission rates up to 200 kB/s from a single 5 V supply. According to the Analog Devices ADM232A product information, its on-board DC-DC converter and 0.1 µF charge-pump capacitors generate the bipolar voltage levels required for RS-232 communication.
What are the key specifications of ADM232AANZ that engineers should know?
The ADM232AANZ provides two RS-232 drivers, two receivers, a maximum transmission rate of 200 kB/s, and operation from one 5 V supply. The manufacturer identifies an on-board DC-DC converter, 0.1 µF external charge-pump capacitors, approximately ±9 V output swing, and receiver input capability up to ±30 V. Its 16-lead DIP package makes it directly suited to through-hole legacy and industrial interface designs.
How fast can ADM232AANZ transmit RS-232 data?
The ADM232AANZ supports RS-232 transmission rates up to 200 kB/s. Analog Devices describes the ADM232A family as a high-speed RS-232 line-driver and receiver family, with the ADM232A serving as a pin-compatible upgrade for the AD232 and ADM232L. The practical rate also depends on cable length, host UART capability, and the electrical performance of the connected equipment.
Does ADM232AANZ need a dual power supply?
No. The ADM232AANZ operates from a single 5 V supply because an on-board DC-DC converter produces the positive and negative voltages needed at the RS-232 interface. According to the manufacturer product information, the charge-pump implementation requires small 0.1 µF external capacitors. This simplifies the interface circuit while preserving bipolar RS-232 signal levels.
Where can I download the ADM232AANZ datasheet PDF?
The official ADM232A documentation is available through the Analog Devices product page at https://www.analog.com/en/products/adm232a.html. Use the datasheet link on that page for the complete electrical characteristics, pin descriptions, charge-pump capacitor requirements, and package drawings for ADM232AANZ. Third-party HTML mirrors can assist with searching, but the Analog Devices document should be the controlling reference.
Where can I find the ADM232AANZ pinout?
The ADM232AANZ pinout is published in the Analog Devices ADM232A datasheet. The AANZ package is a 16-lead DIP, and the datasheet identifies the driver outputs, receiver inputs, supply pins, ground pins, charge-pump connections, and external capacitor connections. Assign PCB tracks from that pin-description table rather than inferring connections solely from a generic RS-232 transceiver diagram.
What is the difference between ADM232AANZ and ADM232AAN?
ADM232AANZ identifies the 16-lead DIP ordering option of the ADM232A family, while ADM232AAN is also listed as a 16-PDIP device. The available catalog descriptions establish the same dual-transceiver function, 200 kB/s class, and 5 V operation for both orderable variants, but procurement should confirm the full ordering code and exact manufacturer marking before treating them as identical.
What is the best drop-in replacement for ADM232AANZ?
The ADM232AANZ can be evaluated against compatible 16-lead DIP RS-232 transceivers identified in the cross-reference data, including MAX232CPE, ST3232CN, and LTC232CN. Before replacement, compare supply voltage, driver and receiver counts, charge-pump capacitor connections, shutdown behavior, and every pin assignment. A 16-pin footprint alone does not guarantee that an alternative is pin-to-pin compatible.
Can MAX232CPE replace ADM232AANZ without changing the PCB?
MAX232CPE is a candidate for a no-PCB-change replacement because it is a dual 5 V RS-232 transceiver in a 16-lead DIP package. It also uses a charge-pump approach with small external capacitors. Compatibility still requires a pin-by-pin comparison, particularly for capacitor connections and any shutdown or enable functions, before production use.
When should I choose ADM232AANZ over MAX232CPE?
Choose ADM232AANZ when the board already uses its verified pin arrangement and you want a 200 kB/s dual RS-232 transceiver with two drivers, two receivers, and a 5 V charge-pump supply. MAX232CPE may be preferable when procurement favors the MAXIM-compatible source, provided its data rates, timing, and capacitor values meet the design. For a new board, compare both devices rather than assuming interchangeability.
Is ADM232AANZ suitable for industrial serial-port equipment?
Yes, ADM232AANZ is suitable for many industrial serial-port adapters, controllers, and test instruments that use a point-to-point RS-232 interface. Its 200 kB/s transmission rate and single 5 V operation are useful for equipment with legacy serial connectivity. The through-hole 16-pin DIP package is particularly convenient for industrial controller boards and products assembled through-hole.
How does ADM232AANZ compare with ST3232CN for a drop-in upgrade?
ADM232AANZ and ST3232CN are both presented in the ADM232A cross-reference results as potential replacement products. ADM232AANZ is specified at up to 200 kB/s with two drivers, two receivers, and a 5 V supply. ST3232CN may also fit a 16-lead DIP footprint, but its shutdown function, electrical limits, capacitor arrangement, and pin mapping must be verified before it is accepted as a drop-in substitute.
What is the best Linear Technology equivalent for ADM232AANZ?
LTC232CN is identified by the ADM232A cross-reference results as a potential Linear Technology equivalent. It provides the same general dual-driver, dual-receiver RS-232 interface category and uses a 16-lead DIP package. Check the LTC232 data for its data rate, supply current, driver levels, shutdown behavior, charge-pump connections, and exact pin assignment before substitution.
What can replace ADM232AANZ on a legacy through-hole PCB?
The principal replacement candidates are 16-lead DIP RS-232 transceivers such as MAX232CPE, ST3232CN, and LTC232CN. These candidates preserve the through-hole form factor and dual-driver, dual-receiver architecture, but a qualified drop-in decision requires matching pin names, charge-pump capacitor values, logic thresholds, and timing. Do not rely solely on the shared 16-pin outline.
Where can I buy ADM232AANZ and check current lead time?
Use the Request a Quote form on this page to request the current price, stock position, minimum order quantity, and lead time for ADM232AANZ. The manufacturer describes the ADM232A as available in 16-lead DIP and surface-mount configurations, but production availability can vary by package and order code. The request form provides the appropriate commercial channel for an exact-part quotation.
Is ADM232AANZ in stock and what does it cost?
Current stock and commercial pricing should be confirmed through the Request a Quote form on this page because inventory and lead time can change. The part is identified by Analog Devices as a 5 V, 200 kB/s dual RS-232 transceiver in a 16-lead DIP package. Request the exact ADM232AANZ ordering code to avoid receiving a different package or temperature option.
What design considerations matter for an ADM232AANZ RS-232 interface?
The primary design checks are supply decoupling, charge-pump capacitor placement, pin assignment, signal return, and protection. Use the capacitor values and topology shown in the Analog Devices ADM232A datasheet, place them close to the associated pins, and connect the interface ground to the equipment ground reference. RS-232 is point-to-point, so avoid treating the transceiver as a multi-drop bus.
Is ADM232AANZ RoHS compliant and suitable for automotive use?
The manufacturer product page confirms the ADM232A family and its 16-lead DIP availability, but the commercial listing excerpts do not state the target part's RoHS, REACH, or AEC-Q100 status. Check the current Analog Devices product declarations and documentation for compliance. Do not infer automotive qualification from industrial or commercial interface applications.

Mühendislik referans verileri: ADM232AANZ — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Choose ADM232AANZ when the design specifically calls for a 200 kB/s, dual-driver and dual-receiver RS-232 transceiver in a 16-lead DIP package, particularly when the PCB is already laid out for this device. Its single 5 V supply, integrated DC-DC converter, and 0.1 µF charge-pump capacitors simplify the power arrangement while producing bipolar RS-232 levels. MAX232CPE is a strong sourcing alternative when its timing and exact pin arrangement are confirmed, but the available information does not establish an equal 200 kB/s rating. ST3232CN should be considered for its documented family behavior and shutdown characteristics, subject to a complete pin comparison. LTC232CN offers another same-package-class option, but verify data rate, supply current, thresholds, and capacitor connections. For any replacement, prioritize the manufacturer datasheet over footprint similarity and confirm the external connector wiring, grounding method, and cable length.

Alternatiflerle Karşılaştırma

Parametre Bu Ürün MAX232CPE ST3232CN LTC232CN
Package 16-lead DIP 16-lead DIP 16-lead DIP 16-lead DIP
Brand Analog Devices Maxim Integrated STMicroelectronics Linear Technology
Transceiver Configuration Dual driver and dual receiver Dual driver and dual receiver Dual driver and dual receiver Dual driver and dual receiver
Supply Voltage 5 V 5 V 5 V 5 V

Ana Farklılayıcılar

  • Verified 200 kB/s dual-transceiver performance (karşılaştırma:MAX232CPE)
  • Single 5 V implementation with integrated DC-DC conversion (karşılaştırma:ST3232CN)
  • Documented EIA-232-E and V.28 alignment (karşılaştırma:LTC232CN)

Tasarım Notları

Place the two 0.1 µF charge-pump capacitors close to their associated ADM232AANZ pins and follow the exact polarity and connection shown in the Analog Devices datasheet. Keep the charge-pump loop compact because long PCB traces can increase radiated noise and reduce margin on the bipolar output. Add normal supply decoupling near the 5 V and ground pins. On an existing board, reproduce the original capacitor footprint and pin mapping rather than assuming every 16-pin RS-232 transceiver uses identical capacitor connections.

RS-232 uses bipolar signaling and a reference ground, so route the interface ground to the connector and remote-equipment ground rather than relying only on the cable shield. Keep the transceiver away from switching nodes and high-current return paths. For a through-hole implementation, position the 16-lead DIP near the connector to minimize loop area on the unprotected board edge. If adding surge protection, select components and a placement strategy that do not distort the intended driver and receiver thresholds.

Do not treat a shared 16-lead DIP outline as proof of electrical drop-in compatibility. Compare supply pins, ground pins, driver outputs, receiver inputs, charge-pump capacitor terminals, and shutdown or enable functions pin by pin. Also check the alternative's supported data rate and logic thresholds against the UART and cable. ADM232AANZ is rated up to 200 kB/s, but that rating should not be transferred to another candidate unless its manufacturer specification confirms it.

Uyumluluk Bilgisi

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Kadmiyumdan Arınmış
Unknown
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

The Analog Devices product information identifies the ADM232A family and its EIA-232-E and V.28 interface compliance, but the available excerpts do not state target-part RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status.

İlgili Aramalar

ADM232AANZ datasheet ADM232AANZ pinout ADM232AANZ datasheet pdf ADM232AANZ specifications ADM232AANZ replacement ADM232AANZ equivalent ADM232AANZ cross reference ADM232AANZ price ADM232AANZ stock Analog Devices ADM232AANZ ADM232AANZ 16 DIP pinout ADM232AANZ application circuit

İlgili Bileşenler ve Terimler

Analog Devices ADM232AANZ ADM232A MAX232CPE ST3232CN LTC232CN RS-232 EIA-232-E V.28 RS-232 transceiver line driver line receiver interface IC CMOS DC-DC converter charge pump 200 kB/s 5 V supply bipolar signal 16-lead DIP through-hole package industrial automation test and measurement point-to-point communications
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle