ADM232AANZ - 200 kB/s Dual RS-232 Transceiver | Analog Devices
부품 번호: ADM232AANZ ✓ 활성ADM232AANZ 개요
An RS-232 transceiver is an interface integrated circuit that translates logic-level signals into RS-232 bipolar levels and converts received bipolar signals back into digital logic levels. It belongs to the interface IC hierarchy, where transceivers connect a host, controller, or test instrument to a serial communications port. The ADM232A combines two drivers and two receivers, allowing one package to support two bidirectional serial channels or one full-duplex channel plus additional receive or drive capability.
The ADM232AANZ provides a 200 kB/s transmission rate, single 5 V operation, two drivers, two receivers, and an on-board DC-DC converter. According to the manufacturer product information, the charge-pump design uses only 0.1 µF external capacitors, reducing the external component count required for RS-232 level conversion. The interface is designed to meet EIA-232-E and V.28 specifications, making it suitable for equipment using established RS-232 electrical requirements.
The integrated charge pump creates the positive and negative voltages needed by an RS-232 receiver even though the device itself is powered from only 5 V. This arrangement eliminates the need for a separate bipolar supply at the interface. The two-driver, two-receiver organization also allows designers to combine transmit and receive functions in a standard 16-lead through-hole footprint rather than using separate driver and receiver packages.
Typical applications include industrial serial-port adapters, instrumentation, point-of-sale equipment, test and measurement systems, embedded control equipment, and legacy peripheral connections. The 200 kB/s rate is useful when the linked equipment requires more speed than a basic asynchronous serial interface provides. Because RS-232 is a point-to-point standard, the interface should be placed at the physical end of a cable run and connected to a compatible host or peripheral.
For a new design, verify the complete transceiver pin assignment, charge-pump capacitor values, and supply requirements in the Analog Devices ADM232A datasheet before laying out the PCB. If the target board instead uses a surface-mount footprint, changing to ADM232AANZ requires a package redesign because the AANZ ordering code denotes a 16-lead DIP rather than a surface-mount option.
This page combines the ADM232AANZ interface capabilities, package constraints, replacement guidance, and practical design considerations in one engineering-oriented reference. It also identifies where a same-footprint replacement can be evaluated and where a PCB migration is unavoidable.
드롭인 대체품: ADM232AANZ — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: ADM232AANZ (동일 폼 팩터 및 풋프린트) — 차이점: Package, Supply Voltage, Charge Pump Capacitors, Data Rate, Mounting Type.
MAX232CPE
✅ 드롭인가격 문의
데이터시트 보기 →ST3232CN
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
LTC232CN
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
ADM232AANZ 사양
| Product Type | Dual RS-232 line driver and receiver transceiver |
| Maximum Transmission Rate | 200 kB/s |
| 공급 전압 | 5 V |
| Number of Drivers | 2 |
| Number of Receivers | 2 |
| Charge-Pump Capacitor Value | 0.1 µF |
| On-Board DC-DC Converter | Present |
| RS-232 Output Swing | Approximately ±9 V with a 5 V supply |
| Receiver Input Levels | Up to ±30 V |
| Interface Compliance | EIA-232-E and V.28 |
| 패키지 | 16-lead DIP, 0.300 inch (7.62 mm) pitch |
| 실장 유형 | Through-hole |
ADM232AANZ 16-lead dip, 0.300 inch (7.62 mm) pitch 핀 구성 가이드
ADM232AANZ(16-lead dip, 0.300 inch (7.62 mm) pitch 패키지)의 핀 구성입니다. 핀 번호, 기능, 연결 다이어그램은 제조사 데이터시트에 정의되어 있습니다. 정확한 풋프린트와 솔더링 지침은 해당 문서를 참조하십시오.
다음에 대한 상세 핀아웃 데이터 없음: ADM232AANZ.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
ADM232AANZ 적합 용도: 6 애플리케이션s: Industrial Serial-Port Interface, Test and Measurement Equipment, Point-of-Sale Terminal Interface, Legacy Peripheral Connection, Embedded Control Communication, Instrumentation and Signal-Control Link.
Industrial Serial-Port Interface
The ADM232AANZ fits industrial controllers, adapters, and data-acquisition equipment that uses point-to-point RS-232 communication. Its 200 kB/s maximum transmission rate accommodates legacy asynchronous links that require more throughput than a low-speed serial transceiver provides. The device combines two drivers and two receivers, allowing one 16-lead DIP package to serve two communications paths or a combination of full-duplex and unidirectional links. Because it runs from one 5 V supply, industrial equipment can simplify its power architecture while retaining the positive and negative signal levels required by RS-232. The 16-lead through-hole package also eases assembly and repair on control boards that use conventional DIP sockets.
추천
Test and Measurement Equipment
The ADM232AANZ is appropriate for programmable instruments, laboratory controllers, and legacy test fixtures that communicate through an RS-232 command port. The 200 kB/s rate provides a useful balance between interface speed and compatibility with conventional UART transceivers, while the two transmitters and two receivers can support separate control and status paths. Its single 5 V supply reduces the number of rails required near a sensitive analog or digital instrument. For measurement equipment, place the transceiver close to the external connector and maintain a low-impedance ground connection between the circuit board and cable shield to reduce ground-potential errors. Follow the Analog Devices charge-pump and capacitor layout for stable operation.
추천
Point-of-Sale Terminal Interface
The ADM232AANZ can support a point-of-sale terminal, receipt printer, scanner interface, or payment peripheral that retains an RS-232 port. Two drivers and two receivers provide flexibility for a full-duplex link or multiple one-way connections, while the 200 kB/s capability is suitable for command traffic and burst data. Operating from a single 5 V supply is convenient in point-of-sale equipment where internal rails are limited. The through-hole DIP package may suit larger controller boards with sockets or wave-solder assembly. Designers should confirm whether the peripheral expects standard RS-232 voltage levels, ground continuity, and a particular connector wiring arrangement before finalizing the interface circuit.
추천
Legacy Peripheral Connection
The ADM232AANZ is useful when bringing a modern controller into an older peripheral ecosystem built around RS-232. Its 200 kB/s transmission rate supports the serial data rates commonly used by legacy equipment, while the integrated DC-DC converter generates bipolar levels from one 5 V rail. This allows a controller board to retain a conventional RS-232 connector without requiring a separate negative power supply. The 16-lead DIP package is especially attractive as a replacement for an existing through-hole interface footprint. Confirm pin compatibility, capacitor values, logic polarity, and connector pin numbering against the original schematic before treating the device as a direct replacement.
추천
Embedded Control Communication
The ADM232AANZ can connect an embedded controller or service processor to equipment using a conventional RS-232 port. The 200 kB/s ceiling gives the UART system ample margin for command, diagnostic, and configuration traffic, while two drivers and two receivers allow more flexible channel allocation. A single 5 V supply simplifies connections to embedded logic rails, and the on-board DC-DC converter supplies the required bipolar line levels internally. In embedded products, account for the fact that RS-232 is intended for point-to-point links, maintain a common ground path with the remote equipment, and place protection components near the external connector. The DIP package can also facilitate prototype revisions where the interface footprint has not yet been committed to a surface-mount design.
추천
Instrumentation and Signal-Control Link
The ADM232AANZ can serve as the command and status interface between an instrumentation product and a host computer. Its 200 kB/s rate supports frequent parameter updates and diagnostic exchanges, while its integrated charge pump provides the required RS-232 voltage swings from a single 5 V supply. Using two receivers can simplify monitoring of multiple status signals, and two drivers can support separate command or control outputs. Keep the interface converter electrically close to the connector, route the cable ground with the signal conductors, and observe the datasheet's charge-pump capacitor placement. Although the converter is intended for data and control signaling rather than high-bandwidth analog transmission, it is appropriate for supervisory channels that sit alongside precision measurement circuitry.
추천
추천 제품 요약
엔지니어링 참조 데이터: ADM232AANZ — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | MAX232CPE | ST3232CN | LTC232CN |
|---|---|---|---|---|
| Package | 16-lead DIP | 16-lead DIP | 16-lead DIP | 16-lead DIP |
| Brand | Analog Devices | Maxim Integrated | STMicroelectronics | Linear Technology |
| Transceiver Configuration | Dual driver and dual receiver | Dual driver and dual receiver | Dual driver and dual receiver | Dual driver and dual receiver |
| Supply Voltage | 5 V | 5 V | 5 V | 5 V |
주요 차별점
- Verified 200 kB/s dual-transceiver performance (vs MAX232CPE)
- Single 5 V implementation with integrated DC-DC conversion (vs ST3232CN)
- Documented EIA-232-E and V.28 alignment (vs LTC232CN)
설계 노트
Place the two 0.1 µF charge-pump capacitors close to their associated ADM232AANZ pins and follow the exact polarity and connection shown in the Analog Devices datasheet. Keep the charge-pump loop compact because long PCB traces can increase radiated noise and reduce margin on the bipolar output. Add normal supply decoupling near the 5 V and ground pins. On an existing board, reproduce the original capacitor footprint and pin mapping rather than assuming every 16-pin RS-232 transceiver uses identical capacitor connections.
RS-232 uses bipolar signaling and a reference ground, so route the interface ground to the connector and remote-equipment ground rather than relying only on the cable shield. Keep the transceiver away from switching nodes and high-current return paths. For a through-hole implementation, position the 16-lead DIP near the connector to minimize loop area on the unprotected board edge. If adding surge protection, select components and a placement strategy that do not distort the intended driver and receiver thresholds.
Do not treat a shared 16-lead DIP outline as proof of electrical drop-in compatibility. Compare supply pins, ground pins, driver outputs, receiver inputs, charge-pump capacitor terminals, and shutdown or enable functions pin by pin. Also check the alternative's supported data rate and logic thresholds against the UART and cable. ADM232AANZ is rated up to 200 kB/s, but that rating should not be transferred to another candidate unless its manufacturer specification confirms it.
규정 준수 정보
The Analog Devices product information identifies the ADM232A family and its EIA-232-E and V.28 interface compliance, but the available excerpts do not state target-part RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status.