Texas Instruments

ADS1281IPW - 31-Bit 4-kSPS Seismic ADC | Texas Instruments

MPN: ADS1281IPW ✓ Aktif
24-pin TSSOP Package
MOQ: 1 |

ADS1281IPW Genel Bakış

Texas Instruments ADS1281IPW is an ultra-high-resolution, single-channel delta-sigma analog-to-digital converter designed for seismic and energy-exploration instrumentation. It converts one differential input at up to 4 kSPS, provides a 31-bit conversion result, and is packaged in a 24-pin TSSOP. The device integrates the analog front end, fourth-order inherently stable delta-sigma modulator, digital filter, and serial interface into one compact converter.

A delta-sigma ADC is a voltage-sampling data-converter category that uses continuous-time modulation and digital noise shaping to obtain high resolution from low-speed measurements. In the broader electronics hierarchy, the ADS1281 belongs to the ADC family, then to delta-sigma converters, then to integrated data-converter ICs and semiconductors. Its architecture is especially appropriate for slow, high-precision measurements where narrow-band noise and integrated digital filtering are more important than high conversion throughput.

The ADS1281's principal characteristics include one differential analog input, a maximum conversion rate of 4 kSPS, a 31-bit output resolution, and a fourth-order inherently stable modulator. A differential input supports rejection of common-mode noise when the source is balanced. The integrated digital filtering reduces the bandwidth of high-frequency noise before the conversion result is delivered, while the low-noise converter architecture helps preserve weak signals in geophone or other high-impedance sensing systems.

Technically, the ADS1281 combines a fourth-order delta-sigma modulation stage with integrated filtering and a serial data interface. Because delta-sigma conversion trades conversion speed for resolution and noise shaping, it is better suited to vibration, seismic, energy-metering, and precision instrumentation signals than to high-bandwidth waveform conversion. The single-chip architecture reduces board area by consolidating the signal-conditioning and conversion functions, but careful analog grounding, reference design, supply bypassing, and digital-interface layout remain essential.

Typical uses include seismic acquisition systems, vibration monitors, energy-exploration equipment, precision weighing, geophone interfaces, and industrial instrumentation with narrow-band sensor signals. Its differential input can simplify the connection of bridge-style or balanced sensors, while the digital filter supports measurements where slow-changing sensor information must be isolated from environmental noise.

For PCB design, keep the analog input, reference, and supply paths compact and route digital clock and data traces away from sensitive sensor nodes. Use the application information in the TI datasheet for the recommended input and reference network. Confirm the selected external resistor, capacitor, and clock values against the operating mode because filter settings and digital decimation affect conversion latency.

This product overview combines the device architecture, package details, practical use cases, and sourcing guidance to support design review. The comparison and selection notes emphasize the difference between true pin-compatible replacements and converters that merely share a similar resolution or package, preventing a footprint match from being mistaken for functional equivalence.

Drop-in alternatifler için ADS1281IPW — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

Bu ürüne yer değiştirme seçenekleri mevcut değil.

Alternatifleri Talep Edin

ADS1281IPW Maksimum Değerlendirmeler & Elektriksel Özellikler

ADC Type Delta-sigma ADC
Çözünürlük 31 bit
Number of Channels 1 channel
Number of Inputs 1 input
Input Architecture Differential
Maximum Conversion Rate 4 kSPS
Modulator Order Fourth order
Modulator Stability Inherently stable
Paket 24-pin TSSOP
Montaj Türü Surface mount
Application Category Seismic and energy exploration

ADS1281IPW 24-pin tssop Pin Yapısı Kılavuzu

ADS1281IPW (24-pin tssop paket) için pin yapısı. Bu analog bileşen, giriş, çıkış ve güç besleme pinleri içerir. Ofset null, telafi ve etkinleştirme pin yapılandırmaları için üretici veri kitapçığını referans alın. Sinyal işleme ve güç amplifikasyon devreleri için mükemmel bir bileşendir.

24-pin tssop paket pin çizelgesi için ADS1281IPW

Ayrıntılı pin çıkış verisi mevcut değil: ADS1281IPW.

Aşağıdaki veri sayfası tam pin konfigürasyonu için.

Tipik Uygulamalar

ADS1281IPW için uygundur 6 uygulamas: Seismic Acquisition Systems, Vibration Monitoring, Energy Exploration Equipment, Precision Industrial Instrumentation, Geophone Signal Conditioning, Precision Weighing Systems.

🏭

Seismic Acquisition Systems

ADS1281IPW fits seismic acquisition front ends that convert weak, low-frequency signals from geophones or other seismic sensors. Its 31-bit conversion result and 4 kSPS maximum rate provide high numerical resolution while the single differential input helps reject common-mode noise in balanced sensor wiring. The device's fourth-order inherently stable delta-sigma modulator is particularly appropriate for narrow-band energy-exploration channels. Place the converter close to the analog input network, follow the TI application circuit for input filtering and reference conditioning, and verify the digital-filter configuration against the required acquisition bandwidth and conversion latency.

🏭

Vibration Monitoring

ADS1281IPW is well suited to industrial vibration monitoring where a sensor produces a small differential signal and the desired information occupies a limited frequency band. The 31-bit output preserves fine amplitude detail, while the maximum 4 kSPS conversion rate supports low-frequency structural and machine-health measurements. Differential input reduces sensitivity to shared ground-bounce and common-mode noise when the sensor is balanced. The principal design trade-off is the narrow measurement bandwidth and digital-filter latency, which should be selected to capture the diagnostic frequencies while rejecting broadband vibration and electrical noise.

⚡

Energy Exploration Equipment

ADS1281IPW addresses energy-exploration instrumentation that prioritizes resolution and stable narrow-band acquisition over high sample throughput. Its one differential analog channel and 31-bit result support precision measurement of low-level exploration signals, and the fourth-order delta-sigma architecture performs noise shaping before digital filtering. TI designed the ADS1281 family specifically for seismic and energy applications. In a field instrument, use a low-noise reference and clean analog supply, isolate clock and serial traffic from the sensor path, and choose digital-filter settings that meet the required signal bandwidth without making acquisition latency impractically long.

🔧

Precision Industrial Instrumentation

ADS1281IPW can serve precision industrial instrumentation when the selected signal is slowly varying and must be resolved with high accuracy. The 31-bit delta-sigma conversion path is better matched to strain, pressure, resistance, or process-control signals than to fast transient waveforms. Differential input allows a balanced bridge or differential sensor to reject common-mode voltage, while the digital filter suppresses out-of-band noise. Design around the device's supported input and reference ranges, verify settling time for each data rate, and provide local bypass capacitors to keep supply noise from entering the conversion result.

📡

Geophone Signal Conditioning

ADS1281IPW is a strong candidate for geophone signal conditioning because it combines a differential input with high-resolution, narrow-band conversion. The balanced input architecture can reduce susceptibility to common-mode interference when the sensor leads and analog front end are carefully arranged. Its 31-bit result provides substantial numerical headroom for detecting small seismic events, and the fourth-order delta-sigma modulator performs noise shaping before the output is filtered. The design should follow the TI recommended input network, use a quiet reference, keep the sensor return path compact, and configure decimation so that the resulting bandwidth captures the target seismic frequencies.

🏭

Precision Weighing Systems

ADS1281IPW can be evaluated for precision weighing and force measurement when mechanical bandwidth is low and differential excitation is used. The 31-bit resolution supports fine measurement increments, while noise shaping and digital filtering concentrate the converter performance around the selected measurement bandwidth. A strain-gauge bridge generally requires a low-noise excitation and reference arrangement, so the analog network must be designed as part of the converter system rather than added afterward. Confirm the supported input range, reference voltage, digital-filter mode, and settling interval in the TI datasheet before selecting component values or setting the update rate.

What is the ADS1281IPW?
The ADS1281IPW is a 31-bit, single-channel delta-sigma ADC for seismic and energy-exploration instrumentation. It accepts one differential input, converts at up to 4 kSPS, and is packaged in a 24-pin TSSOP. According to the TI product page and datasheet, the device uses a fourth-order, inherently stable delta-sigma modulator and combines the converter, filtering, and interface functions on one IC.
What is the conversion rate and resolution of ADS1281IPW?
The ADS1281IPW provides a 31-bit conversion result at up to 4 kSPS. According to the TI ADS1281 product information, it is an ultra-high-resolution converter intended for narrow-band, high-precision signal chains. The 4 kSPS maximum rate makes it appropriate for seismic, vibration, and energy measurement rather than high-speed waveform acquisition.
What type of ADC and input does ADS1281IPW use?
The ADS1281IPW is a single-channel delta-sigma ADC with a differential analog input. The TI manufacturer information describes one input and a fourth-order, inherently stable modulator. Differential operation helps reject common-mode disturbance when the sensor and analog front end are arranged as a balanced source.
Where can I download the ADS1281IPW datasheet PDF?
The official ADS1281IPW datasheet and supporting documentation are available from the Texas Instruments ADS1281 product page at https://www.ti.com/product/ADS1281. Use the manufacturer page for the current datasheet revision, pin descriptions, electrical characteristics, recommended application circuit, and package drawings before finalizing a PCB design.
Where can I find the ADS1281IPW pinout?
The ADS1281IPW pinout is shown in the pin-configuration section of the TI ADS1281 datasheet and its 24-pin TSSOP package drawing. The device is identified in distributor technical listings as a 24-pin TSSOP. Use the datasheet pin table to assign analog inputs, reference connections, supplies, clock signals, and serial interface functions.
What are the key specifications of ADS1281IPW that engineers should know?
The principal ADS1281IPW specifications are 31-bit resolution, one differential input channel, a maximum conversion rate of 4 kSPS, a fourth-order inherently stable delta-sigma modulator, and a 24-pin TSSOP package. TI identifies the device for seismic and energy-exploration systems. These figures define it as a narrow-band, high-resolution measurement converter rather than a high-speed ADC.
Where can I buy ADS1281IPW online?
Use the Request a Quote form on this page to request ADS1281IPW availability, current lead time, and an order quote. The form routes the request through XAIPART without embedding a static price that may become obsolete. Provide the required quantity and packaging preference so the exact ADS1281IPW ordering code can be confirmed.
What is the price of ADS1281IPW?
Submit ADS1281IPW through the Request a Quote form on this page for the current unit price, quantity breaks, and availability. Pricing can change with order quantity, market conditions, and package form, so the page does not publish a fixed customer-facing price. The request can include the required tube or other authorized packaging configuration.
What is the lead time and stock status for ADS1281IPW?
Request the current lead time and stock allocation for ADS1281IPW using the Request a Quote form on this page. The form is the appropriate channel for checking available quantity, scheduled delivery, and order confirmation because inventory changes continuously. Include your required quantity, target date, and acceptable packaging options.
Is ADS1281IPW in stock?
The current ADS1281IPW stock status should be confirmed through the Request a Quote form on this page. Provide the required quantity and delivery schedule so XAIPART can check current inventory and supply timing. This avoids treating a historical listing status as a guaranteed present-day allocation.
ADS1281IPW vs ADS1259IPW: which is better for seismic measurement?
The ADS1281IPW is the better match for seismic measurement because it combines a 31-bit result, one differential input, and up to 4 kSPS conversion in the seismic-focused ADS1281 architecture. The ADS1259IPW is a 24-bit industrial converter with a different input architecture and operating requirements. It is not a drop-in replacement for ADS1281IPW.
ADS1281IPW vs ADS1232IPWR: what is the difference?
ADS1281IPW and ADS1232IPWR belong to different high-resolution delta-sigma converter families and are not automatically interchangeable. ADS1281IPW provides one differential channel, 31-bit output, and up to 4 kSPS conversion in a 24-pin TSSOP. ADS1232IPWR uses a different channel count, conversion rate, interface configuration, and electrical design, so board changes are required.
When should I choose ADS1281IPW over a lower-rate ADC?
Choose ADS1281IPW when the design requires a narrow-band sensor signal with high numerical resolution and seismic-grade instrumentation performance. Its 31-bit output, 4 kSPS maximum rate, and differential input are appropriate for geophone, vibration, and energy-exploration channels. A lower-rate ADC is preferable only when the application cannot use the ADS1281 power, filtering, and configuration requirements.
Is ADS1281IPW suitable for vibration monitoring?
Yes, ADS1281IPW is suitable for vibration monitoring when the useful signal remains within the converter's narrow-band measurement range. Its 31-bit resolution, differential input, and 4 kSPS maximum rate support high-precision low-frequency vibration acquisition. The TI datasheet filter settings and application circuit should be used to establish bandwidth and conversion latency.
What is the best drop-in replacement for ADS1281IPW?
No independently confirmed drop-in replacement was identified for ADS1281IPW in the available cross-reference information. ADS1259IPW is explicitly not a drop-in replacement despite sharing a TSSOP-24 format, and ADS1282IPWR has a different 28-pin package and two-channel architecture. Treat any replacement as a redesign until pin, electrical, timing, and digital-interface equivalence is confirmed.
Can another manufacturer supply an equivalent ADS1281IPW?
No cross-manufacturer pin-compatible equivalent for ADS1281IPW was confirmed. ADS1281IPW is a specialized 31-bit, single-channel seismic ADC, so matching only the TSSOP package or conversion rate is insufficient for drop-in use. A substitute must preserve the differential input, fourth-order modulator behavior, power architecture, reference requirements, clocking, filtering, and serial data interface.

Mühendislik referans verileri: ADS1281IPW — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Choose ADS1281IPW when a design needs a dedicated high-resolution, narrow-band measurement channel and can support the ADS1281 power, reference, clock, and filtering architecture. Its 31-bit resolution, single differential input, and 4 kSPS maximum rate make it particularly appropriate for seismic, vibration, and energy-exploration signals. ADS1259IPW should not be selected merely because it uses a TSSOP-24 package; its lower resolution and different input and supply requirements make it a redesign rather than a drop-in change. ADS1232IPWR likewise requires a new channel, interface, and timing design. ADS1282IPWR is also unsuitable as a direct replacement because it adds a second channel and uses a different 28-pin package. For new ADS1281-based products, verify the latest TI datasheet, supported operating modes, filter latency, reference requirements, and PCB footprint against the actual instrumentation specification before releasing the schematic.

Alternatiflerle Karşılaştırma

Parametre Bu Ürün
Brand Texas Instruments
Package 24-pin TSSOP
ADC Architecture Fourth-order inherently stable delta-sigma modulator
Resolution 31 bit
Conversion Rate 4 kSPS maximum
Channel Count 1 channel
Input Architecture Differential
Target Application Seismic and energy exploration

Tasarım Notları

Route the differential sensor input as a compact, balanced pair and keep the input network close to the ADS1281IPW analog pins. Place the anti-alias and filtering components at the locations shown in the TI application circuit. This minimizes differential-to-single-ended conversion of interference and prevents clock, serial-data, and supply return currents from coupling into the high-impedance sensor path.

Use the TI-recommended supply and reference bypass arrangement, including the capacitor types and ESR characteristics stated in the datasheet. Place bypassing components at their associated device pins rather than at the power-entry connector. The reference path is particularly sensitive because supply or reference disturbance can create gain error and correlated conversion noise that cannot be corrected merely by increasing the digital filter order.

Configure the digital filter and decimation rate so that the retained bandwidth contains the measurement signal while the resulting latency remains acceptable for the acquisition system. Pay particular attention to the clock signal and its return path because timing jitter can degrade conversion performance. Use a low-jitter clock source, avoid routing the clock alongside analog inputs, and follow the datasheet interface timing for serial data capture.

Uyumluluk Bilgisi

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Kadmiyumdan Arınmış
Unknown
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

The TI ADS1281 product materials identify the part and its environmental target applications, but no specific RoHS, REACH, lead-free, halogen-free, conflict-minerals, or AEC-Q100 status is stated in the available product information. Confirm the current declarations and qualification status with Texas Instruments before regulated production use.

Veri doğrulanma tarihi: 2026-11-18 — XAIPART bileşen mühendislik ekibi tarafından doğrulanmış ve derlenmiş veri

İlgili Aramalar

ADS1281IPW datasheet ADS1281IPW datasheet pdf ADS1281IPW pinout ADS1281IPW specifications Texas Instruments ADS1281IPW ADS1281IPW replacement ADS1281IPW equivalent ADS1281IPW vs ADS1259IPW ADS1281IPW seismic ADC ADS1281IPW price ADS1281IPW stock ADS1281IPW application circuit

İlgili Bileşenler ve Terimler

Texas Instruments ADS1281IPW ADS1281 ADS1259IPW ADS1232IPWR ADS1282IPWR ADS1262IPW ADS1131IDR delta-sigma ADC analog-to-digital converter single-channel ADC differential input fourth-order delta-sigma modulator 31-bit resolution 4 kSPS conversion rate digital decimation filter noise shaping seismic monitoring energy exploration vibration monitoring geophone interface 24-pin TSSOP TSSOP package family surface-mount package
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle