Analog Devices

ADV7281WBCPZ-MA 10-Bit Video Decoder | Analog Devices

MPN: ADV7281WBCPZ-MA ✓ Aktif
1.71 V to 1.89 V Vdss 32-LFCSP, 5 x 5 mm Package
MOQ: 1 |

ADV7281WBCPZ-MA Genel Bakış

The Analog Devices ADV7281WBCPZ-MA is a 10-bit, 4-times-oversampled analog video decoder with a 32-LFCSP 5 x 5 mm package. It converts NTSC, PAL, and SECAM composite, S-Video, and component video into an 8-bit YCrCb 4:2:2 stream delivered through a MIPI CSI-2 interface. The decoder accepts single-ended, pseudo-differential, and fully differential analog inputs.

An analog video decoder extracts digital luminance and chrominance data from legacy baseband video signals. Within the signal-chain hierarchy, it is a video interface IC rather than a display driver: the ADV7281 family digitizes composite, S-Video, or component sources so that a portable device, automotive display, industrial imaging system, or security-camera controller can process standard-definition video digitally. Automatic format detection reduces configuration effort across regional television standards.

The ADV7281-MA family provides a 10-bit internal decoding path with 4-times oversampling and supports both single-ended and differential analog arrangements. Its control interface is a 2-wire bidirectional serial port compatible with I2C programming conventions. The manufacturer identifies the decoder as a 1.8 V CMOS device, while the listed operating supply ranges include 1.71 V to 1.89 V and 2.97 V to 3.63 V. The industrial temperature rating extends from -40 C to +105 C.

Analog Devices states that the ADV7281-M and ADV7281-MA convert analog video into an 8-bit YCrCb 4:2:2 data stream for transmission over the Mobile Industry Processor Interface, commonly called MIPI CSI-2. This architecture preserves a compact digital transport between the decoder and an embedded video processor instead of requiring parallel pixel buses. The LFCSP package also provides a practical option for space-constrained portable equipment.

Typical uses include automotive center displays, rear-view camera systems, portable media equipment, industrial control panels, security cameras, and consumer devices that must ingest legacy analog video. The decoder is particularly relevant where composite, S-Video, or component inputs coexist with a CSI-2 video pipeline and automatic NTSC, PAL, and SECAM recognition is valuable.

For PCB design, treat analog video routing as a controlled-impedance signal path and keep the decoder, termination network, and supporting clock or decoupling components close to one another. Confirm the exact pin assignments, exposed-pad connection, supply sequencing, and external component recommendations in the manufacturer datasheet before fabrication.

This product reference combines the manufacturer’s decoder architecture, supported video formats, interface characteristics, supply ranges, and package information with practical guidance for analog-video routing, power planning, firmware setup, and selecting an ADV7281-family alternative.

Drop-in alternatifler için ADV7281WBCPZ-MA — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

ADV7281WBCPZ-M

✅ Yerleştirme
📦 32-LFCSP (5 x 5 mm)
Uses the same 32-LFCSP footprint and ADV7281-M video architecture; the -MA grade is specified to +105 C while the -M grade is intended for a lower temperature class, approximately 20 C less at the upper limit

📋 Katalogda Olmayan Referans Alternatifi

ADV7281WBCPZ

✅ Yerleştirme
Analog Devices
📦 32-LFCSP (5 x 5 mm)
10-bit SDTV analog video decoder · 10 bit · 4 times · 4 inputs · NTSC, PAL, and SECAM · ITU-R BT.656 · YCrCb 4:2:2 · 8 outputs, P0 to P7

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

ADV7281A-M

✅ Yerleştirme
📦 32-LFCSP (5 x 5 mm)
The manufacturer states that ADV7281A-M has the same pinout as and software compatibility with ADV7281-M; its IDENT code differs by 1 revision identifier while the 10-bit decoder architecture remains comparable

📋 Katalogda Olmayan Referans Alternatifi

ADV7281WBCPZ-MA Özellikler

Product Type Analog video decoder
Decoder Resolution 10 bit
Oversampling 4 times
Supported Analog Formats NTSC, PAL, and SECAM composite, S-Video, and component video
Analog Input Modes Single-ended, pseudo-differential, and fully differential
Digital Output Format 8-bit YCrCb 4:2:2
Digital Output Interface MIPI CSI-2
Control Interface 2-wire bidirectional serial interface, I2C compatible
Process Technology 1.8 V CMOS
Low Supply Voltage Range 1.71 V to 1.89 V
High Supply Voltage Range 2.97 V to 3.63 V
İşletim Sıcaklığı Aralığı -40 C to +105 C
Paket 32-LFCSP, 5 x 5 mm
Pin Sayısı 32 pins
Montaj Türü Surface mount
Portability Designed for space-constrained portable applications

ADV7281WBCPZ-MA 32-lfcsp, 5 x 5 mm Pin Yapısı Kılavuzu

ADV7281WBCPZ-MA (32-lfcsp, 5 x 5 mm paket) için pin yapısı. Pin numaralandırma, işlevleri ve bağlantı şemaları üretici veri kitapçığında tanımlanmıştır. Doğru ayak ve soldurma kılavuzları için onu referans alın.

32-lfcsp, 5 x 5 mm paket pin çizelgesi için ADV7281WBCPZ-MA

Ayrıntılı pin çıkış verisi mevcut değil: ADV7281WBCPZ-MA.

Aşağıdaki veri sayfası tam pin konfigürasyonu için.

Tipik Uygulamalar

ADV7281WBCPZ-MA için uygundur 6 uygulamas: Automotive Center-Display Video Input, Rear-View Camera Video Interface, Portable Media and Imaging Equipment, Security Camera Video Interface, Industrial Control-Panel Video, Video Test and Measurement Equipment.

🚗

Automotive Center-Display Video Input

The ADV7281WBCPZ-MA fits automotive center-display systems that must accept legacy composite, S-Video, or component video before forwarding it to an MIPI CSI-2 processor. Its 10-bit decoder and 4-times oversampling provide a digital conversion path without a parallel pixel interface, while the listed -40 C to +105 C range supports thermally demanding environments. Differential and pseudo-differential input options allow the board to accommodate balanced automotive source circuitry. The 32-LFCSP 5 x 5 mm package also conserves board area, although AEC-Q100 qualification for the exact ordering must be confirmed before production release.

🚗

Rear-View Camera Video Interface

The ADV7281WBCPZ-MA can serve as the analog front end for a rear-view or auxiliary camera design by decoding composite video into an 8-bit YCrCb 4:2:2 MIPI CSI-2 stream. Automatic recognition of NTSC and PAL is useful for systems intended to operate across different regional camera standards, while S-Video support provides better chroma separation when the source offers separated color information. Use the differential or pseudo-differential input arrangement supported by the family to reduce sensitivity to ground offsets and cable-coupled noise in vehicle environments.

📱

Portable Media and Imaging Equipment

The ADV7281WBCPZ-MA is well suited to portable imaging equipment that must ingest analog baseband video from cameras, capture cards, or legacy media sources. Its 32-LFCSP 5 x 5 mm package minimizes PCB footprint, and the 1.71 V to 1.89 V supply range supports integration with a 1.8 V CMOS processing domain. The decoder converts NTSC, PAL, or SECAM composite and S-Video into a compact CSI-2 data stream, reducing connector count and board routing compared with a parallel video interface. Firmware should verify input synchronization and chroma performance with each source device.

🎥

Security Camera Video Interface

The ADV7281WBCPZ-MA supports security-camera designs that retain an analog composite or S-Video sensor output but need a modern digital transport. It detects NTSC, PAL, and SECAM automatically and converts the selected input into an 8-bit YCrCb 4:2:2 stream over MIPI CSI-2. This allows an embedded processor to receive video through a compact serial link instead of a wide parallel bus. The small LFCSP package leaves additional board area for storage, communications, or power circuitry. Source amplitude, sync polarity, and chroma bandwidth should be characterized during prototype testing.

🏭

Industrial Control-Panel Video

The ADV7281WBCPZ-MA can decode analog video in industrial control panels, test systems, and operator displays that accept composite, S-Video, or component sources. The listed -40 C to +105 C operating range covers many factory environments, while automatic format detection simplifies installation across NTSC, PAL, and SECAM regions. Converting video to MIPI CSI-2 permits a compact module boundary between the analog front end and a modern embedded display processor. Apply the manufacturer’s grounding, decoupling, and analog-routing guidance carefully because high-power switching equipment can couple noise into the low-level video inputs.

🔧

Video Test and Measurement Equipment

The ADV7281WBCPZ-MA is useful in compact video test equipment that must analyze or route legacy baseband signals. Its multiformat input support permits a single instrument to handle NTSC, PAL, and SECAM composite, S-Video, or component sources. The 4-times-oversampled 10-bit decoder provides a digital representation suitable for downstream analysis, while MIPI CSI-2 carries the decoded output to a processor or capture logic. Designers should account for gain calibration, sync timing, chroma filtering, and the precise clock configuration required by the manufacturer’s recommended test circuit.

What is the ADV7281WBCPZ-MA?
The ADV7281WBCPZ-MA is a 10-bit, 4-times-oversampled analog video decoder from Analog Devices that supports NTSC, PAL, and SECAM composite, S-Video, and component video. It produces an 8-bit YCrCb 4:2:2 stream through a MIPI CSI-2 interface and is packaged in a 32-LFCSP 5 x 5 mm surface-mount package. According to the manufacturer datasheet, its differential and single-ended input flexibility makes it suitable for portable, automotive, and industrial video systems.
What video standards does the ADV7281WBCPZ-MA support?
The ADV7281WBCPZ-MA supports NTSC, PAL, and SECAM analog baseband signals in composite, S-Video, and component formats. Analog Devices describes the device as a one-chip multiformat decoder with automatic standard detection. This allows one PCB design to accept several regional and source formats instead of requiring separate decoder circuits. The resulting digital representation is an 8-bit YCrCb 4:2:2 video stream carried over MIPI CSI-2.
What is the output format of the ADV7281WBCPZ-MA?
The ADV7281WBCPZ-MA outputs 8-bit YCrCb 4:2:2 video data through its MIPI CSI-2 interface. The manufacturer datasheet identifies the ADV7281-M and ADV7281-MA as converting analog baseband video into this digital format. The decoder’s internal path is described as 10-bit with 4-times oversampling. Confirm the configured output resolution, lane count, and CSI-2 timing in the manufacturer register documentation before configuring the host receiver.
What analog input types can the ADV7281WBCPZ-MA accept?
The ADV7281WBCPZ-MA accepts single-ended, pseudo-differential, and fully differential analog video inputs. This flexibility supports source circuits that use either single-ended composite and S-Video paths or balanced component-video connections. The manufacturer datasheet specifically identifies all three input arrangements for the ADV7281 family. Select the correct input configuration in the device registers and preserve the recommended source termination when laying out the analog video channels.
What supply voltages does the ADV7281WBCPZ-MA operate from?
The ADV7281WBCPZ-MA operates from listed supply ranges of 1.71 V to 1.89 V and 2.97 V to 3.63 V. The device is fabricated on a 1.8 V CMOS process, with the lower range serving the 1.8 V domain and the upper range serving a 3.3 V domain. Use the manufacturer’s power-supply and decoupling diagrams for the exact rail assignments, startup requirements, exposed-pad connection, and test-point arrangement.
Where can I download the ADV7281WBCPZ-MA datasheet PDF?
The official ADV7281WBCPZ-MA datasheet PDF is available from Analog Devices at https://www.analog.com/media/en/technical-documentation/data-sheets/ADV7281.PDF. The manufacturer product page at https://www.analog.com/en/products/adv7281.html provides the broader family overview and supporting documentation. Use the datasheet for the complete pin-description table, electrical characteristics, register details, and recommended application circuit rather than relying on abbreviated distributor summaries.
Where can I find the ADV7281WBCPZ-MA pinout?
The complete pinout for the ADV7281WBCPZ-MA is shown in the pin-description table and package drawing in the official Analog Devices ADV7281 datasheet. The target device uses a 32-LFCSP 5 x 5 mm package with an exposed thermal pad that must be connected according to the manufacturer layout guidance. Do not infer individual signal names from the distributor pinout diagram without cross-checking the datasheet because power, ground, analog input, clock, and CSI-2 signals have package-specific assignments.
How is the ADV7281WBCPZ-MA programmed?
The ADV7281WBCPZ-MA is programmed through a 2-wire bidirectional serial port that is compatible with I2C communication conventions. This interface allows an embedded host to configure input routing, video standards, output timing, and device registers. According to the manufacturer product page, the ADV7281, ADV7281-M, and ADV7281-MA families use this common control approach. Firmware should include register initialization, status polling, and recovery behavior for unsupported or unstable input conditions.
Is the ADV7281WBCPZ-MA suitable for automotive video systems?
The ADV7281WBCPZ-MA is suitable for temperature-controlled video systems because its listed operating range is -40 C to +105 C and it accepts composite, S-Video, and component video. The family is also available in an LFCSP package for compact portable implementations. Automotive qualification status and individual AEC-Q100 requirements must be confirmed for the exact ordered variant before it is installed in a safety-relevant or automotive-grade product.
What can replace the ADV7281WBCPZ-MA?
The closest documented replacements are pin-compatible members of the ADV7281 family, including ADV7281WBCPZ-M and the ADV7281A-M family. The ADV7281A-M is stated to have the same pinout as and software compatibility with ADV7281-M, with an updated IDENT code. Exact equivalence to the -MA ordering cannot be established from the available family documentation alone, so verify electrical limits, temperature grade, supported outputs, and firmware behavior before substitution.
ADV7281WBCPZ-MA vs ADV7281WBCPZ-M, which should I choose?
Choose ADV7281WBCPZ-MA when the design needs the -MA family’s listed -40 C to +105 C operating range and the intended feature set is confirmed by the manufacturer. Choose ADV7281WBCPZ-M when its electrical, thermal, and output capabilities satisfy the system and its lower-temperature operating limit is acceptable. Both use the 32-LFCSP 5 x 5 mm package, but availability and exact regulatory requirements should also influence the final choice.
When should I choose the ADV7281WBCPZ-MA over another video decoder?
Choose the ADV7281WBCPZ-MA when the source is legacy analog video and the destination is a compact MIPI CSI-2 receiver. Its 10-bit, 4-times-oversampled decoding path supports NTSC, PAL, and SECAM composite, S-Video, and component inputs, while the 32-LFCSP package limits board area. Select another decoder when the input is already digital, requires a different output protocol, or needs video formats and resolutions outside the ADV7281-MA feature set.
Is the ADV7281WBCPZ-MA suitable for security cameras?
The ADV7281WBCPZ-MA is suitable for security-camera designs that need to decode an analog composite or S-Video source into a digital CSI-2 stream. Automatic support for NTSC, PAL, and SECAM simplifies installations across regions, and the 5 x 5 mm LFCSP package leaves room for a compact image-processing assembly. Validate the camera’s signal amplitude, chroma format, line timing, and synchronization behavior during hardware bring-up.
Where can I buy the ADV7281WBCPZ-MA and check its lead time?
Use the Request a Quote form on this page to request the current ADV7281WBCPZ-MA price, stock position, minimum order quantity, and production lead time. The exact MPN includes the -MA suffix, so quote requests should state ADV7281WBCPZ-MA rather than the base ADV7281WBCPZ or the -M variant. Supply schedule can change by package, quantity, and manufacturing conditions, so obtain a written quotation before committing the BOM.
What are the key specifications of ADV7281WBCPZ-MA that engineers should know?
The key ADV7281WBCPZ-MA specifications are a 10-bit decoder, 4-times oversampling, 8-bit YCrCb 4:2:2 output, MIPI CSI-2 transport, and a 32-LFCSP 5 x 5 mm package. The device accepts single-ended, pseudo-differential, or fully differential analog video and supports NTSC, PAL, and SECAM composite, S-Video, and component formats. Listed supply ranges are 1.71 V to 1.89 V and 2.97 V to 3.63 V, with operation from -40 C to +105 C.

Mühendislik referans verileri: ADV7281WBCPZ-MA — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Choose ADV7281WBCPZ-MA when the design must decode NTSC, PAL, or SECAM analog video and send 8-bit YCrCb 4:2:2 over MIPI CSI-2 in a compact 32-LFCSP implementation. Its -40 C to +105 C listed range is particularly relevant to automotive and industrial equipment. Choose ADV7281WBCPZ-M when the same footprint and core decoding path are needed but the full temperature environment does not justify the -MA grade. Choose ADV7281WBCPZ for an older base-family configuration after checking every electrical and register difference. Consider ADV7281A-M when its documented software compatibility and updated IDENT behavior fit the host driver, but validate the -MA-specific requirements before substitution. In every case, confirm pin assignments, supported input mode, output resolution, power sequencing, exposed-pad treatment, and exact qualification status against the manufacturer documentation.

Alternatiflerle Karşılaştırma

Parametre Bu Ürün ADV7281WBCPZ-M ADV7281WBCPZ ADV7281A-M
Package 32-LFCSP (5 x 5 mm) 32-LFCSP (5 x 5 mm) 32-LFCSP (5 x 5 mm) 32-LFCSP (5 x 5 mm)
Brand Analog Devices Analog Devices Analog Devices Analog Devices
Decoder Resolution 10 bit 10 bit 10 bit 10 bit
Oversampling 4 times 4 times 4 times 4 times
Digital Output Format 8-bit YCrCb 4:2:2 8-bit YCrCb 4:2:2 8-bit YCrCb 4:2:2 8-bit YCrCb 4:2:2
Output Interface MIPI CSI-2 MIPI CSI-2 MIPI CSI-2 MIPI CSI-2
Control Interface 2-wire bidirectional serial interface, I2C compatible 2-wire bidirectional serial interface 2-wire bidirectional serial interface Software compatible with ADV7281-M
Supported Analog Inputs Single-ended, pseudo-differential, and fully differential Single-ended, pseudo-differential, and fully differential Single-ended, pseudo-differential, and fully differential Single-ended, pseudo-differential, and fully differential
Software and Identification ADV7281-MA family behavior ADV7281-M behavior ADV7281 base-family behavior Software compatible with ADV7281-M; updated IDENT code

Ana Farklılayıcılar

  • Extended-temperature -MA ordering (karşılaştırma:ADV7281WBCPZ-M)
  • MIPI output for compact digital transport (karşılaştırma:ADV7281WBCPZ)
  • Automatic multiformat decoding (karşılaştırma:ADV7281A-M)

Tasarım Notları

Route analog video inputs as short, controlled-impedance traces and place their termination, filtering, and protection components near the decoder. Keep the analog and CSI-2 sections physically distinct, and observe the manufacturer’s analog and digital ground guidance rather than creating arbitrary splits. The exposed pad under the 32-LFCSP requires the prescribed copper and thermal design. Exact trace geometry and clearance values should be taken from the manufacturer layout guidance because the available family documentation does not define them.

The listed supply domains are 1.71 V to 1.89 V and 2.97 V to 3.63 V. Follow the manufacturer’s rail topology, decoupling values, and startup sequence when assigning these domains to analog, digital, and I/O functions. Place high-frequency bypass capacitors directly at the relevant package pins and verify ripple at the supply pins with an oscilloscope. Because the decoder produces sensitive YCrCb data from low-level analog signals, supply noise can appear as pattern disturbance, sync instability, or chroma error.

MIPI CSI-2 uses a high-speed serial link, so its clock and data lanes require continuous return paths and manufacturer-referenced geometry. Avoid introducing stubs, test pads without provision, or right-angle routing on the high-speed side. Match the CSI-2 clock and data lanes as a group, observe input and output timing margins at the host processor, and confirm the decoder configuration supports the intended lane count. The analog input section remains sensitive even though the internal output is digital.

Do not treat ADV7281WBCPZ-M, ADV7281WBCPZ, and ADV7281A-M as automatically identical to the -MA ordering. Although the family uses the same 32-LFCSP footprint and similar decoding architecture, temperature grade, qualification, identifier values, and firmware expectations can affect interchangeability. Confirm the exact MPN in the bill of materials, program for the selected variant, and test sync lock, chroma level, CSI-2 eye margin, and power sequencing before approving a substitution.

Uyumluluk Bilgisi

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Kadmiyumdan Arınmış
Unknown
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

The family operating range of -40 C to +105 C does not by itself establish AEC-Q100 qualification. Compliance and material declarations must be checked for the exact ADV7281WBCPZ-MA ordering.

İlgili Aramalar

ADV7281WBCPZ-MA ADV7281WBCPZ-MA datasheet ADV7281WBCPZ-MA datasheet pdf ADV7281WBCPZ-MA pinout ADV7281WBCPZ-MA equivalent ADV7281WBCPZ-MA replacement ADV7281WBCPZ-MA price ADV7281WBCPZ-MA stock Analog Devices ADV7281WBCPZ-MA ADV7281WBCPZ-MA 32-LFCSP pinout ADV7281WBCPZ-MA MIPI CSI-2 ADV7281WBCPZ-MA automotive video decoder ADV7281WBCPZ-MA vs ADV7281WBCPZ-M ADV7281WBCPZ-MA cross reference what does ADV7281WBCPZ-MA decode

İlgili Bileşenler ve Terimler

Analog Devices ADV7281WBCPZ-MA ADV7281 ADV7281-M ADV7281-MA ADV7281A-M ADV7281WBCPZ-M ADV7281WBCPZ MIPI CSI-2 YCrCb 4:2:2 analog video decoder video interface IC NTSC PAL SECAM composite video S-Video component video differential input I2C-compatible control interface 1.8 V CMOS 32-LFCSP QFN package family surface-mount package
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle