ADV7281WBCPZ-MA 10-Bit Video Decoder | Analog Devices
부품 번호: ADV7281WBCPZ-MA ✓ 활성ADV7281WBCPZ-MA 개요
An analog video decoder extracts digital luminance and chrominance data from legacy baseband video signals. Within the signal-chain hierarchy, it is a video interface IC rather than a display driver: the ADV7281 family digitizes composite, S-Video, or component sources so that a portable device, automotive display, industrial imaging system, or security-camera controller can process standard-definition video digitally. Automatic format detection reduces configuration effort across regional television standards.
The ADV7281-MA family provides a 10-bit internal decoding path with 4-times oversampling and supports both single-ended and differential analog arrangements. Its control interface is a 2-wire bidirectional serial port compatible with I2C programming conventions. The manufacturer identifies the decoder as a 1.8 V CMOS device, while the listed operating supply ranges include 1.71 V to 1.89 V and 2.97 V to 3.63 V. The industrial temperature rating extends from -40 C to +105 C.
Analog Devices states that the ADV7281-M and ADV7281-MA convert analog video into an 8-bit YCrCb 4:2:2 data stream for transmission over the Mobile Industry Processor Interface, commonly called MIPI CSI-2. This architecture preserves a compact digital transport between the decoder and an embedded video processor instead of requiring parallel pixel buses. The LFCSP package also provides a practical option for space-constrained portable equipment.
Typical uses include automotive center displays, rear-view camera systems, portable media equipment, industrial control panels, security cameras, and consumer devices that must ingest legacy analog video. The decoder is particularly relevant where composite, S-Video, or component inputs coexist with a CSI-2 video pipeline and automatic NTSC, PAL, and SECAM recognition is valuable.
For PCB design, treat analog video routing as a controlled-impedance signal path and keep the decoder, termination network, and supporting clock or decoupling components close to one another. Confirm the exact pin assignments, exposed-pad connection, supply sequencing, and external component recommendations in the manufacturer datasheet before fabrication.
This product reference combines the manufacturer’s decoder architecture, supported video formats, interface characteristics, supply ranges, and package information with practical guidance for analog-video routing, power planning, firmware setup, and selecting an ADV7281-family alternative.
드롭인 대체품: ADV7281WBCPZ-MA — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
ADV7281WBCPZ-M
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
ADV7281WBCPZ
✅ 드롭인가격 문의
데이터시트 보기 →ADV7281A-M
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
ADV7281WBCPZ-MA 사양
| Product Type | Analog video decoder |
| Decoder Resolution | 10 bit |
| Oversampling | 4 times |
| Supported Analog Formats | NTSC, PAL, and SECAM composite, S-Video, and component video |
| Analog Input Modes | Single-ended, pseudo-differential, and fully differential |
| Digital Output Format | 8-bit YCrCb 4:2:2 |
| Digital Output Interface | MIPI CSI-2 |
| Control Interface | 2-wire bidirectional serial interface, I2C compatible |
| Process Technology | 1.8 V CMOS |
| Low Supply Voltage Range | 1.71 V to 1.89 V |
| High Supply Voltage Range | 2.97 V to 3.63 V |
| 동작 온도 범위 | -40 C to +105 C |
| 패키지 | 32-LFCSP, 5 x 5 mm |
| 핀 수 | 32 pins |
| 실장 유형 | Surface mount |
| Portability | Designed for space-constrained portable applications |
ADV7281WBCPZ-MA 32-lfcsp, 5 x 5 mm 핀 구성 가이드
ADV7281WBCPZ-MA(32-lfcsp, 5 x 5 mm 패키지)의 핀 구성입니다. 핀 번호, 기능, 연결 다이어그램은 제조사 데이터시트에 정의되어 있습니다. 정확한 풋프린트와 솔더링 지침은 해당 문서를 참조하십시오.
다음에 대한 상세 핀아웃 데이터 없음: ADV7281WBCPZ-MA.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
ADV7281WBCPZ-MA 적합 용도: 6 애플리케이션s: Automotive Center-Display Video Input, Rear-View Camera Video Interface, Portable Media and Imaging Equipment, Security Camera Video Interface, Industrial Control-Panel Video, Video Test and Measurement Equipment.
Automotive Center-Display Video Input
The ADV7281WBCPZ-MA fits automotive center-display systems that must accept legacy composite, S-Video, or component video before forwarding it to an MIPI CSI-2 processor. Its 10-bit decoder and 4-times oversampling provide a digital conversion path without a parallel pixel interface, while the listed -40 C to +105 C range supports thermally demanding environments. Differential and pseudo-differential input options allow the board to accommodate balanced automotive source circuitry. The 32-LFCSP 5 x 5 mm package also conserves board area, although AEC-Q100 qualification for the exact ordering must be confirmed before production release.
추천
Rear-View Camera Video Interface
The ADV7281WBCPZ-MA can serve as the analog front end for a rear-view or auxiliary camera design by decoding composite video into an 8-bit YCrCb 4:2:2 MIPI CSI-2 stream. Automatic recognition of NTSC and PAL is useful for systems intended to operate across different regional camera standards, while S-Video support provides better chroma separation when the source offers separated color information. Use the differential or pseudo-differential input arrangement supported by the family to reduce sensitivity to ground offsets and cable-coupled noise in vehicle environments.
추천
Portable Media and Imaging Equipment
The ADV7281WBCPZ-MA is well suited to portable imaging equipment that must ingest analog baseband video from cameras, capture cards, or legacy media sources. Its 32-LFCSP 5 x 5 mm package minimizes PCB footprint, and the 1.71 V to 1.89 V supply range supports integration with a 1.8 V CMOS processing domain. The decoder converts NTSC, PAL, or SECAM composite and S-Video into a compact CSI-2 data stream, reducing connector count and board routing compared with a parallel video interface. Firmware should verify input synchronization and chroma performance with each source device.
추천
Security Camera Video Interface
The ADV7281WBCPZ-MA supports security-camera designs that retain an analog composite or S-Video sensor output but need a modern digital transport. It detects NTSC, PAL, and SECAM automatically and converts the selected input into an 8-bit YCrCb 4:2:2 stream over MIPI CSI-2. This allows an embedded processor to receive video through a compact serial link instead of a wide parallel bus. The small LFCSP package leaves additional board area for storage, communications, or power circuitry. Source amplitude, sync polarity, and chroma bandwidth should be characterized during prototype testing.
추천
Industrial Control-Panel Video
The ADV7281WBCPZ-MA can decode analog video in industrial control panels, test systems, and operator displays that accept composite, S-Video, or component sources. The listed -40 C to +105 C operating range covers many factory environments, while automatic format detection simplifies installation across NTSC, PAL, and SECAM regions. Converting video to MIPI CSI-2 permits a compact module boundary between the analog front end and a modern embedded display processor. Apply the manufacturer’s grounding, decoupling, and analog-routing guidance carefully because high-power switching equipment can couple noise into the low-level video inputs.
추천
Video Test and Measurement Equipment
The ADV7281WBCPZ-MA is useful in compact video test equipment that must analyze or route legacy baseband signals. Its multiformat input support permits a single instrument to handle NTSC, PAL, and SECAM composite, S-Video, or component sources. The 4-times-oversampled 10-bit decoder provides a digital representation suitable for downstream analysis, while MIPI CSI-2 carries the decoded output to a processor or capture logic. Designers should account for gain calibration, sync timing, chroma filtering, and the precise clock configuration required by the manufacturer’s recommended test circuit.
추천
추천 제품 요약
엔지니어링 참조 데이터: ADV7281WBCPZ-MA — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | ADV7281WBCPZ-M | ADV7281WBCPZ | ADV7281A-M |
|---|---|---|---|---|
| Package | 32-LFCSP (5 x 5 mm) | 32-LFCSP (5 x 5 mm) | 32-LFCSP (5 x 5 mm) | 32-LFCSP (5 x 5 mm) |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Decoder Resolution | 10 bit | 10 bit | 10 bit | 10 bit |
| Oversampling | 4 times | 4 times | 4 times | 4 times |
| Digital Output Format | 8-bit YCrCb 4:2:2 | 8-bit YCrCb 4:2:2 | 8-bit YCrCb 4:2:2 | 8-bit YCrCb 4:2:2 |
| Output Interface | MIPI CSI-2 | MIPI CSI-2 | MIPI CSI-2 | MIPI CSI-2 |
| Control Interface | 2-wire bidirectional serial interface, I2C compatible | 2-wire bidirectional serial interface | 2-wire bidirectional serial interface | Software compatible with ADV7281-M |
| Supported Analog Inputs | Single-ended, pseudo-differential, and fully differential | Single-ended, pseudo-differential, and fully differential | Single-ended, pseudo-differential, and fully differential | Single-ended, pseudo-differential, and fully differential |
| Software and Identification | ADV7281-MA family behavior | ADV7281-M behavior | ADV7281 base-family behavior | Software compatible with ADV7281-M; updated IDENT code |
주요 차별점
- Extended-temperature -MA ordering (vs ADV7281WBCPZ-M)
- MIPI output for compact digital transport (vs ADV7281WBCPZ)
- Automatic multiformat decoding (vs ADV7281A-M)
설계 노트
Route analog video inputs as short, controlled-impedance traces and place their termination, filtering, and protection components near the decoder. Keep the analog and CSI-2 sections physically distinct, and observe the manufacturer’s analog and digital ground guidance rather than creating arbitrary splits. The exposed pad under the 32-LFCSP requires the prescribed copper and thermal design. Exact trace geometry and clearance values should be taken from the manufacturer layout guidance because the available family documentation does not define them.
The listed supply domains are 1.71 V to 1.89 V and 2.97 V to 3.63 V. Follow the manufacturer’s rail topology, decoupling values, and startup sequence when assigning these domains to analog, digital, and I/O functions. Place high-frequency bypass capacitors directly at the relevant package pins and verify ripple at the supply pins with an oscilloscope. Because the decoder produces sensitive YCrCb data from low-level analog signals, supply noise can appear as pattern disturbance, sync instability, or chroma error.
MIPI CSI-2 uses a high-speed serial link, so its clock and data lanes require continuous return paths and manufacturer-referenced geometry. Avoid introducing stubs, test pads without provision, or right-angle routing on the high-speed side. Match the CSI-2 clock and data lanes as a group, observe input and output timing margins at the host processor, and confirm the decoder configuration supports the intended lane count. The analog input section remains sensitive even though the internal output is digital.
Do not treat ADV7281WBCPZ-M, ADV7281WBCPZ, and ADV7281A-M as automatically identical to the -MA ordering. Although the family uses the same 32-LFCSP footprint and similar decoding architecture, temperature grade, qualification, identifier values, and firmware expectations can affect interchangeability. Confirm the exact MPN in the bill of materials, program for the selected variant, and test sync lock, chroma level, CSI-2 eye margin, and power sequencing before approving a substitution.
규정 준수 정보
The family operating range of -40 C to +105 C does not by itself establish AEC-Q100 qualification. Compliance and material declarations must be checked for the exact ADV7281WBCPZ-MA ordering.