AK4122AVQ - 24-Bit 96kHz SRC with DIR | AKM Semiconductor
MPN: AK4122AVQ ✗ Son Kullanım ZamanıAK4122AVQ Genel Bakış
A sample rate converter, or SRC, is a digital audio interface device that resamples digital audio data from one clock domain to another. The AK4122AVQ combines this function with a digital audio receiver, or DIR, in one IC. Together, these blocks form part of the broader digital-audio signal chain: digital audio interface IC → sample rate converter → digital audio receiver → audio codec or digital signal processor.
The primary functional characteristics are one-channel processing, 24-bit audio resolution, and operation up to 96 kHz. Input rates cover the commonly used 8 kHz through 96 kHz range, while selectable output rates include 32 kHz, 44.1 kHz, 48 kHz and 96 kHz. An internal phase-locked loop simplifies systems that previously required a separate master-clock source when the converter operates in slave mode.
The AK4122AVQ is intended for digital audio equipment where source and destination clocks differ. Its architecture is based on a digital sample-rate-conversion stage and an integrated DIR rather than an analog conversion path. The DIR receives digital audio data and extracts timing information, while the SRC performs the rate conversion needed to align the incoming stream with the selected output rate.
Typical uses include professional digital audio equipment, consumer audio processors, broadcast and recording interfaces, USB or network-audio bridges, and clock-conversion stages within multichannel audio systems. It is especially relevant when an upstream source produces 8 kHz to 96 kHz data while the downstream audio path requires one of the standard output rates.
PCB implementation requires careful assignment of digital audio data, control signals, clock signals and power according to the manufacturer pin-description table. Decoupling should follow the datasheet's recommended network, while audio-clock and data traces should be routed with controlled impedance and minimized crosstalk to preserve signal integrity.
This product page combines the device's stated conversion rates, digital-audio architecture, package information and practical design considerations. It also distinguishes verified production parameters from specifications that require confirmation in the manufacturer datasheet before schematic release or PCB sign-off.
Drop-in alternatifler için AK4122AVQ — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
Bu ürüne yer değiştirme seçenekleri mevcut değil.
Alternatifleri Talep EdinAK4122AVQ Özellikler
| Product Type | Digital audio sample rate converter with digital audio receiver |
| Channel Count | 1 channel |
| Audio Resolution | 24 bit |
| Maximum Sample Rate | 96 kHz |
| Input Sample Rate Range | 8 kHz to 96 kHz |
| Output Sample Rates | 32 kHz, 44.1 kHz, 48 kHz or 96 kHz |
| Internal PLL | Yes |
| External Master Clock Requirement | Not required in slave mode |
| Digital Audio Receiver | Integrated DIR |
| Paket | 48-LQFP, 7 mm × 7 mm |
| Pin Sayısı | 48 pins |
| Montaj Türü | Surface mount |
| RoHS Durumu | RoHS indicated on component PDF listing; certification scope not stated |
AK4122AVQ 48-lqfp, 7 mm × 7 mm Pin Yapısı Kılavuzu
AK4122AVQ (48-lqfp, 7 mm × 7 mm paket) için pin yapısı. Pin numaralandırma, işlevleri ve bağlantı şemaları üretici veri kitapçığında tanımlanmıştır. Doğru ayak ve soldurma kılavuzları için onu referans alın.
Ayrıntılı pin çıkış verisi mevcut değil: AK4122AVQ.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
AK4122AVQ için uygundur 6 uygulamas: USB Audio Interface Clock Conversion, Network Audio Format Conversion, Professional Digital Audio Interface, Broadcast and Recording Equipment, Consumer Audio Processor, Digital Audio Test and Measurement.
USB Audio Interface Clock Conversion
The AK4122AVQ fits a USB-audio path when the host stream and downstream codec do not operate at the same sample rate. Its one-channel, 24-bit SRC accepts 8 kHz to 96 kHz inputs and converts them to 32 kHz, 44.1 kHz, 48 kHz or 96 kHz. Place the converter between the digital stream source and the audio-processing stage, while allowing the USB controller to handle protocol and endpoint timing. The internal PLL is useful in slave-mode designs because it can eliminate a separate master-clock source. Confirm the actual supported interface mode, clock polarity and register settings against the manufacturer clocking diagrams before laying out the board.
Network Audio Format Conversion
The AK4122AVQ is suitable for a network-audio bridge that receives digital audio at one rate and forwards it to a processor operating at another. The converter handles one channel per device and supports input rates from 8 kHz through 96 kHz, with selectable outputs including 44.1 kHz and 48 kHz. Place it at the digital-clock boundary rather than after the final analog amplifier, where it can normalize the sample rate while preserving a one-bit digital signal path. Multichannel network products may require one converter per channel or a device with a wider channel count, so system architecture must be checked before the footprint is committed.
Professional Digital Audio Interface
In a professional recording or monitoring interface, the AK4122AVQ can bridge digital sources whose clocks differ from the processing engine's domain. Its 24-bit architecture and operation to 96 kHz suit high-resolution audio paths, while the integrated DIR provides a defined receiver function within the same 48-LQFP device. The converter is especially useful when slave-mode operation can simplify master-clock distribution. Engineers should still evaluate channel count, supported audio serial formats, jitter performance and synchronization with the remaining DSP chain using the complete AK4122A datasheet.
Broadcast and Recording Equipment
The AK4122AVQ can support rate conversion within broadcast, recording and studio signal-processing equipment that accepts digital audio at one of eight possible input rates and requires a standardized output rate. For example, a 44.1 kHz source can be translated to 48 kHz, or an 8 kHz voice stream can be moved to 32 kHz. Its internal PLL reduces the need for an external master clock in slave-mode configurations. The surrounding converter should still provide the professional interface's required word-clock, framing, status and monitoring behavior, and its clocking architecture should be reviewed for jitter and lock requirements.
Consumer Audio Processor
The AK4122AVQ is useful in a consumer audio processor that receives digital audio from a source with an incompatible clock and feeds a DAC or digital audio engine with a preferred rate. Its one-channel, 24-bit operation and selectable 32 kHz, 44.1 kHz, 48 kHz or 96 kHz outputs cover common media and voice rates. Using the converter at the digital boundary allows the DAC-side engine to operate at a consistent clock. The integrated digital audio receiver should be configured for the intended audio format, and the supply, jitter and analog-output specifications of the complete signal chain must be reviewed independently.
Digital Audio Test and Measurement
The AK4122AVQ can serve as the rate-conversion element in digital-audio test equipment that must compare or route streams at different nominal rates. Its 24-bit processing, 96 kHz maximum rate and integrated PLL provide a defined conversion block between test sources and analyzers. Instrument designs should include controllable clocking, status monitoring and enough test points to observe lock and data validity. Because only one channel is processed, stereo or multichannel analysis may require parallel devices unless the surrounding test architecture multiplexes channels. Use the manufacturer register descriptions to verify indication and error-reporting behavior.
Mühendislik referans verileri: AK4122AVQ — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün |
|---|---|
| Package | 48-LQFP, 7 mm × 7 mm |
| Brand | AKM Semiconductor Inc. |
| Product Type | Digital sample rate converter with integrated DIR |
| Channel Count | 1 channel |
| Audio Resolution | 24 bit |
| Maximum Sample Rate | 96 kHz |
| Input Sample Rate Range | 8 kHz to 96 kHz |
| Output Sample Rates | 32 kHz, 44.1 kHz, 48 kHz or 96 kHz |
| Internal PLL | Yes |
| External Master Clock | Not required in slave mode |
Tasarım Notları
Assign all 48-LQFP nets directly from the manufacturer pin-description table and follow the recommended package land pattern. Keep audio data, bit clock, frame clock and other high-speed clock nets short, and route clocks before deciding on via or test-point locations. Maintain continuous ground-plane return paths beneath clock routes to limit loop area and reduce susceptibility to coupled noise.
Implement the datasheet-recommended decoupling network at the supply and ground pins, placing each capacitor as close as practical to its associated package terminal. Confirm the production variant's supply-voltage range, absolute maximum ratings and sequencing requirements before adding analog or digital loads. If the converter shares a rail with switching circuitry, include filtering and verify the resulting ripple at the device pins rather than relying only on a bulk-capacitor value.
Treat bit clock, frame clock and serial audio data as a coordinated clock-and-data interface. Match trace lengths to the electrical-interface requirements where the datasheet specifies them, avoid unnecessary stubs and provide return vias alongside high-speed traces. Validate the design across all intended sample rates, especially when the source and destination clocks are not frequency-locked.
Do not infer slave-mode compatibility from the presence of an internal PLL without checking the required interface mode. AK4122AVQ supports 8 kHz to 96 kHz input and four listed output rates, but unsupported combinations may require specific mode, divider or filter settings. Validate lock status, serial format, word length and channel configuration in hardware using the documented register values and clocking diagrams.
Uyumluluk Bilgisi
The component PDF listing indicates RoHS status, but detailed declarations and scope are not stated. REACH, AEC-Q100, lead-free, halogen-free and conflict-minerals status remain unconfirmed.